Used Bale Grab for sale (1,928)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors. Bwjdpfxou Tg I De Abzjw

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,500 kg, empty load weight: 1,227 kg, total length: 1,500 mm, construction width: 1,130 mm, opening width: 1,860 mm, Cellulose/bale clamp Load center: 500 Bwsdpsu D S Tiofx Abzsw ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Description: Rotation range 360° Opening range 560-1860 Arm height 900mm Arm length 1150mm

Condition: good (used), Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Clamshell grab: bucket width 790 mm -Hydraulic drive: Thumm 708 HZ-4D/SAE -Opening width: 1880 mm Bwedpfx Abjtvb Dqezsw -Total height: 2550 mm -Mounting bolt: Ø 45 mm, dimensions see photos -Transport dimensions: 1880/790/H1800 mm -Weight: 1240 kg

Condition: good (used), - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 Bale length: 1,100 mm Bale width: 750 mm Bale height: 750 mm Press length: 5,640 mm Press width: 1,674 mm Press height: 2,500 mm Weight: 4,450 kg - Motor power in kW: 9 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2013 HSM HL 4010 LI baler - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 - Motor power in kW: 9.5 - Voltage/frequency: 3 x 400 V / 50 Hz Bjdpfx Absv Amv Eozeww - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2012

Condition: new, Year of construction: 2024, General information Field of application: Construction Reference number: 10 Weights Empty weight: 1.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: DAP, EXW Working pressure: 210 bar Required hydraulic flow: 90 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information Bwsdpfxjq Ixtxo Abzow We can offer you all range of selector/ demolition/ sorting grab/ grabs/ grapples. All grapples with one year warranty. Contact us for details. We have grapples from 100kg to 5000kg. selectorgrab, selector grab, grapple, grapples, grappin, Schrottscheren, greifen, megragad, grajfer, PINZAS DE SELECCIÓN Y DEMOLICIÓN, PINCE DE TRI, KOCKÁZATKÖVEK, TORTAS DE CLASSIFICAÇÃO, PUNCTE DE SORTURI, Pinze Demolitrici, Selezionatrici, Pinces de Demolition, chwytaka, chwytak

Condition: used, Empty weight: 8.000 kg Transport dimensions (LxWxH): 5,3x4,2x3,5 Bwodpoxc Tpnsfx Abzjw Production country: NL Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Bwedpfxou Thx Rs Abzew Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2025, Year of manufacture: 2025 Bwjdpfx Asxlugtsbzjw

Condition: excellent (used), Year of construction: 2022, operating hours: 8,856 h, functionality: fully functional, working length: 12,000 mm, Press Bodpfexfg Sbjx Abzoww Refurbished 12m length Everything in perfect condition Operational Located at company headquarters.

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Bwodpfx Absra Nyuozew Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,000 kg, fork length: 1,200 mm, empty load weight: 648 kg, Cellulose/Bale Clamp Bwedew Sbf Depfx Abzsw Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: very good Description: 360° rotating bale clamp, opening 790 to 1,630 mm inside/inside, arms 1,000 x 300 mm, very good condition! Rotator unit,

Year of construction: 2019, condition: excellent (used), Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab Bwodpfsw Rnfuox Abzow -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg

Year of construction: 2024, condition: new, functionality: fully functional, Clamshell Bucket, Hydraulic Grab, Grain Bucket, Bucket Grapple, Clamshell Grapple, Bsdpfx Aspcdd Ajbzeww Capacity 2 m3 Gross Weight 1700 KG Rotation 360 Degree 1 Year Warranty - Company Mikron Hidrolik

Condition: used, Material clamp, material gripper, load clamp carrying clamp, lifting clamp, block tongs Bsdpfsdz Spnox Abzoww Manufacturer: NORDGREIF Type 7548 Year of construction: 1997 Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE-marking Own weight: 50 kg sound condition

Condition: used, functionality: fully functional, Fezer panel lifter with electric chain hoist PS 5 with rails, 250 kg load capacity, ideal for loading panel saws. Available from early August! Bwsdpfjw E Irfsx Abzew

Condition: ready for operation (used), Bramidan 4-0F Motor: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 mm Bale weight: 200–250 kg Pressing force: 18 tons Bwsdpfx Asv Ai Uqsbzsw Weight: 1580 kg This machine is used to reduce the volume of waste such as film, cardboard, etc. We also have a Bramidan 3-chamber baler available.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,000 kg, fork length: 1,200 mm, empty load weight: 648 kg, Cellulose/Bale Clamp Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: very good Description: 360° rotating bale clamp, opening 790 to 1,630 mm inside/inside, arms 1,000 x 300 mm, very good condition! Rotator unit, Bjdpfx Absw Sbfwszsww

Condition: good (used), B5 – Ideal for large cartons: High throughput – large capacity Bale is ejected automatically Strap rollers positioned at the front for easy strap replacement Cardboard bale weight (kg): 80-110 Plastic film bale weight (kg): 90-130 Bale size WxDxH (mm): 1000 x 700 x 800 Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Bodpfov Aktnex Abzsww Noise level (dB): 65-68 Average cycle time (sec): 33 Dimensions WxDxH (mm): 1360 x 895 x 2370 Weight (kg): 600 Feed opening W x H (mm): 1000 x 500 Year 2015-16 price: 4000 EUR Year 2014 price: 3500 EUR

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 1,400 kg, empty load weight: 390 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Very good Description: Model 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1675 mm, arm height 440 mm, arm length 1,000 mm, arm smooth on the outside, inside fitted with round bar, arm tips bevelled, load capacity 1,400 kg at 500 mm load center, front dimension 158 mm, center of gravity at 289 mm, weight approx. 390 kg, includes pressure gauge, ISO - Class 2 A connection. Bodpowti E Nofx Abzjww

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Bodpora Nrxsfx Abzsww Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: good (used), Bramidan B 20 Baler Bale dimensions – WxDxH (mm): 1200 x 800 x 800 Feed opening WxH (mm): 1200 x 480 Pressing force: 20 tons Motor (kW): 4.0 Cycle time (s): 36 / 21 Baler dimensions WxDxH (mm): 1775 x 1030 x 2790 Weight (kg): 1600 Stroke (mm): 750 Number of tying points: 4 Year of manufacture: 2012 – 2017 Bramidan X25 – High-performance baler for waste compaction Suitable for various materials, including stretchable types Large, wide chamber Retaining clamps prevent material expansion inside the chamber Short cycle times allow for rapid waste processing TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS foam Bsdpfx Aov Aku Sebzoww Steel cans BALE DIMENSIONS 1200 x 800 x 800 mm PRESS FORCE 25 t BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Year of manufacture: 2012–2018 Price: 5,500 EUR

Condition: excellent (used), Manufacturer: Strautmann Model: PP 1207 Plus Bale size (LxWxH): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 t / 580 kN Performance: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Bodpfx Aev Aiymobzeww Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: sheltered indoor/outdoor Noise level: less than 80 dB(A) Year of manufacture: 2003–2007 I also have Strautmann PP 1207 balers from 2010–2011, price 5500 EUR I also have Strautmann PP 1208 balers from 2014–2015

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Compression force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bwedpfx Abjra Rbgezow Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s

Condition: ready for operation (used), Hsm HL 4809 LI baler Bedpjra Dddefx Abzoww - Large filling opening, ideal for big boxes - Container tipper for convenient filling Pressing force in kN: 480 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions (length x width x height in mm): 1200 x 1100 x 750 - Machine dimensions (length x width x height in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire

Condition: ready for operation (used), Pressing force: 60 tons YEAR OF MANUFACTURE: 2018-2020, price: EUR 5,500 Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm – height Press weight: approx. 2,430 kg Bale weight: up to 500 kg Oil heating Motor: 7.5 kW Brand new showroom baler costs EUR 11,000 Bwedpfx Aera Nqhobzow