Band saw, band resaw

CENTAURO Supercut 80

Condition: new, Year of construction: 2025, functionality: fully functional, exhibition machine minimum slat thickness 2mm magnetic fence position reader adjustable pulling roller spacing material presence detector tape cooling/lubrication system wheel diameter 800mm engine power 15kW smooth feed speed adjustment pneumatic pulling roller pressure control panel with colour touch screen screw tape centring pneumohydraulic tape tensioning year of production 2025 - brand new machine total weight 1300kg 380V power supply Machine available in March Rjdpsv Dh R Tjfx Aazen

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm Rodpfxsw Dp Ufo Aazon - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: used, No. 3231 Extraction unit with briquetting press Spänex SHB 50 Used Complete disposal system for waste materials made of wood, paper, plastic, cotton, etc. The sawdust enters the chip bunker of the hydraulic briquetting press directly after the filter system. After compression, the briquettes are transported directly to the heating system. Technical data according to manufacturer's brochure: Capacity 50 kg/h (depending on material) Throughput 0.45 m3/h Briquette shape 8-cornered, 125 x 70 mm Motor power 5.5 kW Compaction 1:10 Moisture min. 8%, max. 20% Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, without transportation and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Redpfx Aaowqhwlezjn Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Redpfjwqda Nox Aazjn Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch

Condition: used, ALREADY DISMANTLED ‼️ IMMEDIATELY AVAILABLE ‼️ 🔥 Gilles 300 kW Wood Chip Boiler for sale – reliable industrial biomass technology! 🔥 Industrial-scale heating solution with Austrian precision! The Gilles 300 kW boiler is the ideal choice for large facilities, sites, grain dryers, or central heating systems. Key features: Redop Am Rgspfx Aazon 🌲 Fuels: wood chips, pellets, biomass – wide fuel variety ⚡ 300 kW heating capacity – reliable and efficient for heavy-duty users 🔄 Automatic feeding, combustion control, ash removal – minimal personnel required 🧠 Modern control system, optimized combustion ♻️ High efficiency, low emissions 🇦🇹 Gilles = Austrian quality, industrial reliability 💥💰 PRICE: 9,900 EUR – GOOD CONDITION, READY FOR INDUSTRIAL USE! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Industrial boilers, biomass solutions, experienced and competent.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm Rjdpfx Aet R T Hcoazon 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Rjdpfxoizkhvj Aazen Engine power: 3 kW Motor brake: yes Suction connection: 100mm Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device Rsdperfudrsfx Aazsn - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Rodev Evx Uspfx Aazon Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Condition: used, 100 m³ buffer tank made of steel, horizontal, in a frame Volume: 100,000 ltr Dimensions (LxWxH): 15,400 mm x 3,500 mm x3,500 mm Insulation: 100 mm mineral wool, on all sides Wall construction: Insulated walls, painted in RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: Rsdpfxjtv Rp Hs Aazon 1 x manhole for inspection work 1 x connection piece (supply and return (boiler)) 1 x connection piece (flow and return (consumer)) 2 x PT 100 temperature sensors