Used Bar Grinder for sale (15,601)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control Bjdpfx Aodqkrwoiaolp - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: good (used), Year of construction: 2009, pressure: 24 bar, steam boiler 20.000 kg x 24 bar used Bsdper Ezblefx Aiaslp type: Loos year of construction: 2009 capacity: 20.000 kg / h max. working pressure: 24 bar with Saacke burner for natural gas with Economizer with feed water tank available immediately - additional equipment like chimney on demand

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking Bledpszinlwofx Aiaop TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, machine/vehicle number: SX8T_10, pressure (max.): 8 bar, Exhibit: Compressor Kaeser SX 8 T (8 bar) with integrated dryer with SIGMA CONTROL 3 Year of construction: 2026 Operating hours: 2 Bh Bsdpfxjzh Hxye Aiajlp Techn.Daten: Volume flow at 8 bar: 0.80 m³ / min Motor power: 5.5 kW pressure dew point: +3°C Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 915 x 970 mm Weight: 200 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Blodpjzmub Tefx Aiaop

Condition: used, Brand : LNS QUICK LOAD SERVO Total length: 2570 mm Total width: 1340 mm Depth of the bar feeder: 1000 mm Height: 1240-1520 mm Axis height: 900-1180 mm Retraction device: 600 mm Minimum diameter: 6 mm Max. diameter: 80 mm (depending on settings 90mm) Min.bar permissible length: 150 mm Max. Bar permissible lenght: 1470mm (Depending on settings 1500 mm) Max. permissible bar weight: 60 kg Pneumatic feeding: 5 Bar Maximum tyre wear: 6 litres (per loading cycle) Supply voltage: 220-480 volt/ 50 Hz-60Hz Maximum current: 1 A Maximum thrust: 167 Nm Maximum feed rate: > 100 m/min Bjdozl E Eaepfx Aiaolp Charging time: 8- 12 sec Loading time for short parts: 4-7 sec

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Bsdpezpbq Hsfx Aiajlp Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: used, The Kilia Angle Grinder 130 is a professional industrial meat grinder designed for continuous operation in meat processing plants and food production facilities. Featuring a 130 mm throat diameter and a powerful 17 kW drive, it delivers efficient grinding of fresh and slightly frozen meat while maintaining excellent product quality. Its stainless steel construction ensures durability, easy cleaning and high hygienic standards. Technical Specifications Manufacturer: Kilia Model: Angle Grinder 130 Type: Industrial Meat Grinder (Angle Grinder) Throat Diameter: 130 mm Material: Stainless Steel Power Supply: 400 V / 50 Hz / 3N Installed Power: 17 kW Blodpfxjzn I Sue Aiaep Dimensions (L × W × H): 1100 × 1000 × 1500 mm

Condition: good (used), Year of construction: 2016, functionality: fully functional, workpiece diameter (max.): 90 mm, spindle speed (max.): 3,450 rpm, grinding spindle speed: 2,845 rpm, Equipment: emergency stop, For sale is a precision wet cut-off grinding machine from Struers in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Struers Bedpfo Adu Ewox Aiajlp • Model: Labotom-5 • Year of manufacture: 2016 • Disc diameter: approx. Ø 250 mm • Max. cutting diameter: approx. Ø 90 mm / 42×120 mm • Speed: approx. 2,845 rpm (50Hz) • Speed: approx. 3,450 rpm (60Hz) • Includes matching Struers Cooli-1 cooling system • The system is ideal for precise, wet abrasive cutting in the laboratory or for metallographic sample preparation. • Condition: Used, functional Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on truck. Errors in technical data and prior sale are reserved.

Condition: used, functionality: fully functional, overall weight: 1,500 kg, Year of construction: 2002, Erkat ER850-5 excavator-mounted milling cutter Year of manufacture: 2002 MS10 mounting system Operating pressure: 320 bar Approx. 1,500 kg Cutting head width: 850 mm Blsdpfx Aiez Dglijajp

Condition: used, mileage: 17,520 km, power: 110 kW (149.56 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 7,287 mm, total width: 2,020 mm, total height: 2,830 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, No. 87 - You can find this and many other inspected Mercedes-Benz vans on our website: ----Mercedes-Benz Sprinter 315 cdi Maxi (L3) from 11/2025 with only 17,500 km! The vehicle is equipped with many extras and comes from a single owner. MOT/emission test (TÜV) NEW - valid until 09/2028, plus 4 new all-season tires as well as new brake discs and brake pads at the front. First registration: 11/2025, the Mercedes-Benz factory warranty is valid until 11/2027.----Special highlight: The Sprinter has a loading platform from Bär Cargolift, model: BC 600 A2V-E. Permissible total weight: 3500 kg Unladen weight: approx. 2788 kg Payload: approx. 712 kg Wheelbase: 4325 mm Loading area L x W x H (in cm): 430x178x194 VIN: W1V3HCFZ6TP870594 COC document available 2 keys ----* Single owner, good condition, MOT new, 4 new all-season tires, new front brakes * Mercedes-Benz factory warranty until 11/2027 * Active lane keeping assist * Active brake assist * Blind spot assist * Intelligent speed assist * MBUX touchscreen 10.25" * Air conditioning Blodpfsz N Rhmjx Aiaop * Cruise control * Tire pressure monitoring system * Rear view camera * 2nd battery (auxiliary battery) in the interior * Suspension: Stabilization Level II, vehicle without lowering * Reinforced off-road suspension * Reinforced front axle * Airbag, passenger side * Acoustic package * Instrument cluster with color display * Light and rain sensor * 3 seats * Start/stop system * Keyless start * DAB tuner (digital radio reception) * Armrest for driver's seat * Exterior mirrors, electrically adjustable, heated and folding * Central locking * Rear doors 270°, double-wing, opening to the side ----Errors, changes and prior sale reserved----Special equipment: 2nd battery (auxiliary battery) in the interior, suspension: Stabilization Level II, vehicle without lowering, rear door (opening angle 270 degrees), wooden floor in the loading area, connection strip for electrical connections (driver's seat box), cable duct on rear portal, cable duct on side wall, reinforced off-road suspension, battery relay added, lining in the loading/cargo area: wood, high (up to the roof), lining in the loading/cargo area: wheel arch lining (plastic), reinforced front axle Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard, passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, outside temperature display, DAB tuner (digital radio reception), interior light in the loading area with door contact, automatic activation of headlights, grab handle for sliding door at load compartment partition, driving assistance system: breakdown management, generator 250 A, noise reduction outside, body/superstructure: box, high-roof, standard, instrument cluster with color display, communication module (LTE) for digital services, fuel tank: main tank 71 L, load compartment partition, continuous, steering wheel with multifunction, truck registration, marker lights on the side, Mercedes-Benz emergency call system, engine 2.0 L - 110 kW CDI KAT, multimedia system MBUX (touchscreen 10.25"), wheelbase 4325 mm, low emissions according to emissions standard Euro 6e, sliding door loading/passenger compartment right, safety belt system with warning system (passenger side), safety belt system with warning sy

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, ISOG Deckel S11, manufactured in 2011. - Grinding diameter, max. 238-620 mm Bjdpfxjz E H I Hj Aiaolp - Grinding length: 190 mm - Workpiece length: 380-940 mm - Spindle speeds: 2000-12000 rpm including accessories: such as video camera Rotary back grinding attachment

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Blodpfez I Uvqex Aiajp

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Blodpfx Ajz I Uvwjiasp

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Bodpfoz I Uwbsx Aiaolp

Condition: used, Centerless grinder PARAGON RC-12NC Blodpfx Aoz I Ux Sjiajp

Condition: good (used), Year of construction: 2000, functionality: fully functional, overall weight: 210 kg, Grinding diameter range: ø20 - ø114.3 mm Grinding angle: 20° - 90° Belt speed: 30 m/sec. / 2.800 rpm Grinding belt size: 150 x 2.000 mm Featured with: - 7 various grinding rolls - Various grinding belts Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 145 x 120 x 85 cm Blsdsz H Sdcjpfx Aiajp Machine weight: 210 kg

Year of construction: 2013, condition: used, functionality: fully functional, This machine is used for sharpening straight blades used in Eillert, Fam, and other slicing machines. The machine is in good working order and ready for use. Bjdpfsz H Atusx Aiaslp Type: SKGM Year of manufacture: 2013 Please check out my other listings.

Condition: excellent (used), Amada Togu Surface Grinder Tool diameter (min.) Ø 2 Tool diameter (max.) Ø 160 Vertical traverse (mm) 200 Grinding speed: Stations A / B / C (mm/min) 0.06 Stations D / E (mm/min) 0.03 Bodpfsz R A T Dox Aiaolp Dimensions: Length (mm) 750 Width (mm) 800 Height (mm) 1920 Weight (kg) 470

Condition: new, Year of construction: 2025, Economical L-Sealer for wrapping middle sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.2kW; compressed air not necessary; max. speed of the machine in neutral: 20 cycles/minute; max. product dimensions (mm): L450xW400xH300; max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1560xW760xH1040; weight (net/gross): 125/175kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Blodpev Nlzgefx Aiaop

Condition: new, Year of construction: 2025, Automatic side sealing machine for shrinkwrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; max. product dimensions: unlimited length, 300mm width, 150mm height; weight (net/gross): 400/500kg; power: 220V, 2kW; air: 5.5 bar/0.1m³/min; L1680xW960xH1500mm. Bodpfx Aiev Nl Efeaslp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Loos steam boiler 2500 kW, 10 bar. (5082) Oil or gas burner available on request. Blsdpfx Aisxqr Dmjaep

Condition: used, Meat grinding machine Manufacturer: Sind Voltage: 380V / 50Hz Blsdpfx Aijxrhfpjasp

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6114676, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 180 kg Dimensions: 850/620/1600 mm Installed power: 0.7 kVA Customs tariff code: 8460.3930 TECHNICAL CHARACTERISTICS DOUBLE CUP PRE-GRINDING AND SUPER-FINISHING WHEEL (FOR HARD METAL) - Abrasive: diamond - Diameter: 175 mm - Bore: 20 mm Spindle speed: 2500 rpm Cutting speed: 23 m/sec Spindle bearing: precision plain bearing Micrometric infeed of the workpiece by means of a fine-pitch threaded spindle, division: 0.01 mm Adjustment of approach and clearance angle: max 26° TOOL HOLDER CLAMPING CAPACITY: - Prism-shaped tool bodies: max 40x40 mm - Cylindrical tool bodies: max 16 mm Bljdpfxsw T S Tbo Aiaop - Circular cutting tools: max 85 mm MOTOR POWER: - Drive motor: 0.55 kVA - Pump motor: 0.1 kVA Coolant tank capacity: 10 l. All technical specifications are provided without obligation and subject to error or omission.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Blsdpfsw T Tfrex Aiajp Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Number of simultaneous axes: 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.