working area 76 mm
Number of stations 1 0
material length beliebig mm
tube diameter mm
grinding band dimension 100 x 2000 mm
Band Speed 30 m/sec
motor speed 2800 U/min
0 3 kW
range L-W-H 1,3 x 0,5 x 0,8 m
Benya2vdhr
weight 200 kg
Pipe grinder
Grit 150
Eebgewflm
150*2000mm belt
Year 1998
for inside and outside radii
Ozpo7
Vertical Wet Belt Grinding Machine MAFAC Type V 100Masch. # 88174543 Year 1988 Technical data:Abrasive belt dimensions20-100 x 3500 mmStand projection500 mmTable size650 x 650 mmWidth of contact surface100 mmBelt speed by pole-changing motor12.5 m/sAir pressure5-6 barOscillation approx.10 mmdrive motor 380 V21 kWweight430 kgspace requirement840 x 1180 x 1760 mmmwith pedestal approx.2050 mm high with complete electrical equipment belt oscillation pneum. Band tension- Band filter automat- sep. swi...
Grinding width: 75 mm
Xkbj2c9j
belt speed: 29 m/s
drive: 3,0 kW
drive type: el./mech.
Connection: 400 V / 50 Hz
grinding belt: 75 x 2000 mm
Remark: including machine base
weight: 75 kg
working area 75 mm
Number of stations 1 0
Band Speed 13,5 - 27 m/min 0
Beoijz3nof
drive AC 4 kW
Wide grinding machine with a horizontal cutter for finishing solid plates.
The first unit is a horizontal cutter that roughly mills the surface of the board
The second unit is a wide belt grinder for finishing the board
technical parameters:
-working width 950 mm
-working height 2-150 mm
-motor cutter 37 kW
-motor grinder 15 kW
- feed motor 5.5 kW
- stroke motor 1.5 kW
- total power input 62 kW
- machine weight 7500 kg
Bq9maaocdt
Table length: 2,5 mIm very good condition.
Bfnhzlvk7b
Specifications:
- Performance: 1000-2000 kg/h
- Electric demands: 3 kW, 400 V, 16 A, triphase
- Material: WNr. 1.4301, AISI 304 stainless steel
- Dimensions: 710x3200x2120 mm
- Output height: 1280 mm
- Weight: 200 kg
- Tub water capacity: 120 L/shift
- Washing water supply: (20-100L/h depending on the setting)
- Water connection: 3/4“ quick connector
- IP65 certified electronics
- Grinder with a massive crushing hammer (available for beetroot and quince)
- Noise emission: 60-70 dB
The fruits go...
Wide grinding machine with a horizontal cutter for finishing solid plates.
The first unit is a horizontal cutter that roughly mills the surface of the board
The second unit is a wide belt grinder for finishing the board
Bq9k3ia892
technical parameters:
-working width 950 mm
-working height 2-150 mm
-motor cutter 37 kW
-motor grinder 15 kW
- feed motor 5.5 kW
- stroke motor 1.5 kW
- total power input 62 kW
- machine weight 7500 kg
Nice affordable grinder for your band saws.
Oxgvh
The grinding stone is 203 mm, suitable for bands from 32-60 mm wide and 2400 to maximum 6000 mm long.
We offer various belt sanders, double sanding blocks, polishing units with suction devices
Qprvrmtf
Combination belt and disc sanding machine
Compact design - ideal for workshop operation
incl. support table and workpiece stop for surface and edge grinding
compact design with stable cast iron stand
the grinding belt can be swivelled vertically
Technical data:
Working area Table dimensions 158 x 225 mm
Working range Belt speed 8 m/s
Working range table angle adjustable 45°
Belt grinder working range angle adjusted 0-90
Drive power Motor power main drive 0.4 kW
Drive power Supply voltage 230 V
D...
Combination belt and disc sanding machine
Universal grinding machine for the workshop
Support tables for plate and belt grinding
easy band change due to quick release fastener
incl. stable steel base frame
Belt grinding device horizontally and vertically adjustable
Dust extraction socket on belt and disc sanding device
Balanced grinding wheel for vibration-free running
Technical data:
Working range Belt speed 8.4 m/s
Working area table top, belt grinding. 152 x 267 mm
Working area table surface,...
Grinding machine
For accurate preparation of pipe connections, for grinding and deburring
suitable for pipe diameters from 20 to 76.1 mm
grinding angle adjustable from 30 - 90°
comfortable handling of the entire grinding device
the grinding roller can be changed easily and quickly
large grinding area on the top of the machine, e.g. for deburring or grinding surfaces
the drive roller at the rear of the machine can also be used for grinding
2 belt speeds - stage 1 for stainless steel and aluminium...
grinding range max. 30 mm
angle adjustable from - to horizontal 0-180 Grad
angle adjustable from - to vertikal 0-45 Grad
angle adjustable from - to negativ 0-52 Grad
connected load 230 V
wheel diameter 100 mm
weight of the machine ca. 55 Kg
dimensions 0,5 x 0,4 x 0,4 m
This grinding machine is suitable for:
Twist drill (max.13mm), milling cutter and turning tool (max. 30mm)
comes with:
- chisel grinding tool
- Diamond grinding stone for HM.
- White whetstone for HSS.
- LED lighting
- All adju...
flader 8 agregats
with invertor x 8
Rtwhlpioi
modell ls 4
new rolle
The SICAR CL2NRT wide-belt sander
Location
Gorzów Wlkp.
Conditions of delivery
9bw7dkw
Cost of delivery
to be agreed
Start type
to be agreed
Description
Comments
dwywałowa with a boot
one motor feeds two shafts
Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS
Dunn9i
Knife Grinder
Grinder for sharpening planer thin ASN-810
Grinder is designed for automatic sharpening planer blades mounted in the package to 4 pieces. Sharpening is done face polishing pots. Assuming the chip occurs outside the cut. The size, number of passes working wyiskrzających, speed and the grinding head of recurrence points - are programmed in a microprocessor controller. The grinding head is moved along the bed by means of a motor-driven helical gear running on guides with recircula...
Serial No. AT 471 443
Capacity 1200 mm swing x 2000 mm between centres
Table swivels 6 degrees - 0 - 6 degrees
Nnjg9
Table traverse speed hydraulically variable
Work head input 5 hp
Work head speeds 10 - 90 rpm
Wheel head input 25 hp approx
Wheel head infeed rate variable
Nominal stone size 1200 mm diameter x 95 mm wide
Internal grinding attachment input powered swing down type
Input 380/3/50
Fitted with coolant
Length 21'
Width 10' 4"
Height 8' 8"
Nett weight actual. 23,640 Kgs. / 23.26 Tons.
Code: ST3304
Samand Double Ended Tool Lapping Grinder
Type: Double Ended Tool Lapping Grinder
Wheel Dia.: 230mm
Brwhud9psr
Tilting Table Rest
Vacuum belt filter (1x), Make Pannevis, Type RT 0,25x4,0 M "Gastight", No. 1348, Year of construction 1996, Contact parts in Hastelloy C4, Material Stainless steel 2.4610 (Hastelloy C-22), Filter surface 1,0 m2, Filter width 250mm, Filter length 4000mm, With motor 0,75 KW, 400 Volt, With variable speed drive , Knife discharge , With vacuum pump (2x), make Siemens and NASH, Motor ± 11,0 KW, With vacuum tank , With liquid pump (2x) make Bungartz (in Hastelloy C4), Motor 4,6 KW + 1,85 KW, With swit...
Tape package consisting of: - Infeed belt TS.L - Emergency delivery TS.ZM - Roller conveyor TS.RL - Telescopic belt TS.T - Switch cabinet TS.EV - Infeed belt TS.L - Infeed belt TS.L
Bhntescapc
Waste removal conveyor
Ebeh7kjj
Blohm PFS9 Profilschleifmaschine Profile Grinder Grinding machine
Typ: PFS9
Steuerung konventionell
aus erster Hand / first-hand machine
Abmessungen:
Gewicht: 3100kg
Dokumentation ausführlich: elektrisch/mechanisch
Die Maschine ist in einem gepflegten Originalzustand.
Die komplette ausfuehrliche Dokumentation ist vorhanden.
Bfjqzhe0fx
Besichtigung unter Strom kann kurzfristig erfolgen.
Für weitere Fragen stehen wir Ihnen gerne zur Verfügung.
Preis, ab Lager hier zzgl. MwSt.
Zustand: sehr ...
Serial No. 34722
Capacity 36" / 914mm swing x 36" / 914mm between centres
Table traverse speed 4" - 123" per min / 101mm - 3124mm
Iwfvdxv
Work head input 400/3/50 3 hp
Work head speeds 13 - 26 rpm
Work head swivels 0 -16 degrees
Wheel head input 400/3 /50 25 hp
Wheel head infeed rate variable pickfeed
Nominal stone size 30 " / 762mm diameter x 6" / 152 wide
Input 400/3/50
Fitted with Coolant
Equipment Balancing Frame
Length 14' / 4.26m
Width 7' 10" / 2.38m
Height 7' 2" / 2.18m
Nett weight actual...
ID000697Belt conveyorManufacturer: Mocklen,Length: 7,40 m,Width: 1,20 m,Height: 900mm, Electric motor: 3 kW,Belt width: 640 you need more information about the equipment, please contact our manager.
Bnvz0bh2uj
Vacuum belt filter (1x), Make Pannevis Utrecht, Type RT 0,96x5,2 M, No. 1336, Year of construction 1986, Material Stainless steel, Filter surface 5,3 M2, Filter width 960mm, Filter length 5200mm, Number of sections: 4, With motor 0,75 KW, 220/380 Volt, With vacuum pump make SIHI, type LPHA-70530 BN, Motor 30,0 KW, 380/660 Volt, Floorspace 10,5x2,6 M, Total height 2,4 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are read...
GMP Protopic Plus 520B laminator + Belt feeder 35
The machine is in very good condition.
It is an advanced machine with high efficiency.
Korea production.
Possibility to work in a full or semi-automatic machine.
Technical data:
Max sheet format: 520mm x 800mm
Min sheet format: 210mm x 200mm
Min weight: 120 gsm
Max weight: 350gsm
Working temperature: 80-140 ° C
Max working speed: 15m / min
Weight: 370 kg
230V power supply
Br8dpitzht
Installed power of 2.5kW
In addition, air 6 Bar.
A steel cylinde...
Lacquer sanding is a very difficult task in the field of production of furniture and furniture
components. Many factors have an influence on a desired result and only the combination of the correct aggregate and abrasives configuration, in conjunction with certain programmable sanding parameters can offer a perfect result. MB Maschinenbau has bundled many years of experience in lacquer sanding in the ROBA Split Belt line and developed a machine that meets these high expectations. Based on the ROBA Te...
ID000519Belt conveyorManufacturer: Mocklen AB,Length: 8 m,Width: 650 mm,Capacity: 50 t/h,Electric motor: 2,2 you need more information about the equipment, please contact our l for best price
D3sghz89
Vacuum belt filter in pressure tight housing (1x), Make Pannevis, Type RT/PT Pilot, No. 1529, Year of construction 1990, Material Polypropylene, Stainless steel 1.4571 (316Ti), Filter surface 0,1 M2, Filter width 100mm, Filter length 1000mm, With motor 0,12 KW, 380 Volt (Ex), With variable speed drive , Knife discharge , With vacuum pump make SIHI, type LPHE-40106, Motor 3,5 KW, 380 Volt (Ex), With vacuum tank (3x), With liquid pump (hose pump 3x), Motor 3x 0,25 KW, 220/380 Volt (Ex), . drive, W...
CENTRE HEIGHT: 171 mm
DISTANCE BETWEEN CENTRES: 430 mm
MAX GRINDING LENGTH: 400 mm
X-AXIS TRAVEL: 170 mm
Z-AXIS TRAVEL: 600 mm
RAPID FEEDS: 12 m/min
MAX ADMITTED LOAD: 150 Kg
SPINDLE: 830 rpm; 24 Nm
Brvy2vzw
GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm
MOTOR POWER: 7,5 kW
CONTROL UNIT: FAGOR 8055 TCO
WEIGHT: 4500 Kg
ACCESSORIES: PAPER FILTER; FUME EXHAUSTER; MAGNETIC FILTER; GRINDING WHEEL BALANCER
NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING ...
Alup
SCK 31-10
Screw compressor
Fully automatic, internally completely piped and wired compact system, single-stage, oil-injected, compressing, air-cooled, soundproofed.
Bncodsjle7
Motor power: 75kW
Final pressure: 10bar
Delivery rate: 9.70m³ / min
Screw compressor in technically and optically perfect condition
The engine was newly stored.
Hoses and great service new.
Operating hours: 19016
Load hours: 17016
Year of construction: 2009
Serial No. 110-948
Spindle speeds 2800 rpm
Stone size 150mm
Input 380/440/3/50hz
Cutting holder swivels 180 degrees
Length 1'4" (406mm)
Width 9" (229mm)
Cy9olk3c
Height 1' (305mm)
Nett weight actual. 30 Kgs.
ID000698Belt conveyorManufacturer: GVC,Length: 7,40 m,Width: 1,80 m,Height: 900mm, Electric motor: 3 kW,Belt width: 800 you need more information about the equipment, please contact our manager.
Jv87am
Vacuum belt filter in pressure tight housing (1x), Make Pannevis, Type RT/PT 0,25 x 2 Mtr, No. 1645, Year of construction 1994, Material Stainless steel 1.4571 (316Ti), Filter surface 0,5 M2, Filter width 250mm, Filter length 2000mm, Number of sections: 4 (3x 400mm + 1x 800mm), With motor 0,25 KW, 230/400 Volt (Ex), With variable speed drive , Belt speed ± 0,4-2,4 CM/S, With vacuum pump make SIHI, With liquid pump , With switchgear (Dim. 1,4x0,5x2,2 M - LxWxH), Floorspace filter 4,0x2,1 M, Weigh...
Code: ST3185
Churchill FB Cylindrical Grinder
Capacity: 42” x 12’ (1050 x 3600mm)
Bjkkulls3l
Machine with:
Linishing attachment
3 x steadies
Description: The slurry (sludge) reaches the drain bed
via a feed box to the drain bed, where the suspension releases water by gravity filtration. The sludge cake is rearranged by built-in baffles so that the water can run off on the surface of the sludge cake. The built-in baffles break up the resulting sludge layer, so that permanently free screen belt surfaces are created, which allow the water released by the flocculation to flow off quickly. The dewatered sludge is removed from the Drain Be...
Suitable for timing applications on all 1.4, 1.6 and 1.8 Twinport petrol engines with belt drive. Kit comprises camshaft setting tools and Belt tensioner locking pins. Applications: Vauxhall: Astra, Corsa, Insignia, Meriva, Signum, Vectra, Zafira Chevrolet: Cruze, Orlando 1.4 1.6 1.8 Fiat: Croma 1.8 16V Alfa Romeo: 159 with 939A4.000 engines
Bpxhk7bu
Serial No. 23239
Grinding Diameter Internal Range 1"-40"
3wcb33qq
Swing over bed 46" / 1168mm
Table traverse 28" / 711mm
Table traverse speed Variable
Work head speeds 8 Off
Work head swivels 45-0-45 Degrees
Work head offset movement 30" / 762mm
Grinding head cross movement 6" / 152mm
Input 380/420/3/50 ac 5 hp-Wheelhead, 3/1.5/1.5/0.75 hp-Workhead
Fitted with 36" / 914mm Diameter Faceplate & Wheel Dresser
Length 11'2" / 3.4m
Width 6'10" / 2.08m
Height 6'8" / 2.03m
Nett weight approx. 6 ton / 6...