Used Iemca Guiding Channel for sale (36)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 022115SB01, bar length: 3,300 mm, total length: 4,292 mm, total width: 1,196 mm, total height: 1,730 mm, overall weight: 2,130 kg, It was fitted to the Biglia B620 (with a spindle length of 1150 mm) – 71 mm guide channels – 70.5 mm bar pusher – 9 bushings (6-20-26-28-32-42-46-52-58 mm). Nsdpfx Aszg Eu Rohnolf

Condition: used, Year of construction: 2006, machine/vehicle number: 020650SA07, Short bar loader, maximum length 2100 mm, minimum/maximum diameter 8-80 mm. Two kits included: 46-66 mm guide channels / 45-65 mm bar pushers. It was fitted to a Tsugami MO8SYE machine. Nledpfxozqnhhe Ahnjf

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm Nlodpfx Ahszk E Irjnef

Condition: good (used), functionality: fully functional, machine/vehicle number: Nr.72.092.010, spindle bore: 12 mm, Iemca CS112 No.72.092.010 Iemca Bar Feeder and Motor Round bars Ø 1 - 12.7 mm (3/64" - 1/2") Supplied with guide sets for 4 mm and 12 mm and with 2 motors for Tornos M4 For 3 m bar lengths ON CLEARANCE SALE REDUCED PRICE! Hexagonal bars Ø 1.3 - 11 mm (3/64" - 7/16") Nledpfjrn I Dfsx Ahnjf Capacity: 28 bars Ø 7.5 mm - 16 bars Ø 12.7 mm Min. bar change time: 26 sec. (with 3200 mm bars) (mod. 32) Feed speed: 1000 mm/sec. Return speed: 1600 mm/sec. Supply voltage: 230/400 volts Installed power: 1.8 kW

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Nodpfx Ahsp Du Aljnslf Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Condition: refurbished (used), Year of construction: 2009, operating hours: 3,129 h, functionality: fully functional, machine/vehicle number: 020913QA04, control type: manual, actuation type: electric, bar length: 8,000 mm, type of input current: AC, KID 80 TYPE 16 BAR FEEDER, serial number 020913QA04 – 500KG. Year 2009 – EU 400 V 3 – 50 HZ – 3.5A – 5 KA – 806sb10001 – 000si03400. Njdpfeznm E Tjx Ahnslf

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, control type: NC control, bar length: 3,000 mm, bar diameter (min.): 25 mm, bar diameter (max.): 72 mm, IEMCA Maxis 72 Njdpoykk Dmefx Ahnolf

Year of construction: 2006, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Njdezqgikopfx Ahnolf Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2008, condition: ready for operation (used), A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible. Nsdozf Nb Ejpfx Ahnjlf

Condition: good (used), Year of construction: 2001, bar diameter (min.): 3 mm, bar diameter (max.): 32 mm, - Guide channel (oil-damped) - max. bar length 3,200 mm - included guide channel: D 21 mm - material pusher length L Nlodpfsy N Tiqex Ahnsf - centering device - synchronization unit - last mounted on a sliding head automatic lathe - weight approx. 800 kg - dimensions LxWxH 4,000x700x1,200 mm

Year of construction: 2007, condition: ready for operation (used), An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026. Nodpfx Ahozgwxzenjlf

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020849GA07, bar length: 3,200 mm, bar diameter (min.): 5 mm, bar diameter (max.): 51 mm, Very good IEMCA Boss 551E Bar feeder. The Boss is the bar feeder for long bars which has been sold the most in the world with more than 30,000 installed units. The Boss 551 Easy is an automatic bar feeder suitable for lathes with fixed and mobile headstock. Round bars: 5 – 51 mm Hexagonal bars: 5 – 44 mm Square bars 5 - 36 mm Bar length: 3200 mm Max. spindle diameter: 65 mm Remnant length 400 mm Bar changeover time 31 sec. (for bar length 3200 mm) Loader weight: 830 kg Nlsdpfx Ahezlh I Djnjf Year: 2008

Condition: good (used), Year of construction: 1990, - For connection to multi-spindle turning centers Nedpfxeihhz Ro Ahnjlf - Storage: Flat magazine, 4 x 450 mm capacity - Bar diameter: 4-52 mm (depending on the guide channel) - Guide channel diameter: 44 mm - Bar length: approx. 3000-4200 mm - Dimensions L x W x H: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

Year of construction: 1999, condition: ready for operation (used), Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible. Nlodpezrn Htefx Ahnsf

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Nlsdpfxsy N R Tts Ahnef

Condition: used, TECHNICAL DETAILS Nljdpezkmdujfx Ahnjf - Bar diameter : 8 - 80 [mm] - Bar length : 3300 [mm] POWER SUPPLY - Supply voltage : 230 / 400 [V]

Condition: used, TECHNICAL DETAILS - Bar diameter : 23 [mm] - Bar length : 3200 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4080 x 1200 [mm] - Machine height : 1750 [mm] - Machine weight : 830 [kg] Nljdpfxszr Ruto Ahnjf EQUIPMENT - Channel diameter : 24 [mm] - Pushcart diameter : 23 [mm]

Condition: used, Year of construction: 2006, Rod diameter: 8 mm to 65 mm (round stock) Njdpfx Ahjzp Ipcjnelf Rod length (33L): approximately 3.3 meters Machine type: Fixed spindle head (automatic lathe) Magazine type: MP magazine (multi-magazine)

Year of construction: 2000, condition: like new (used), Brand: IEMCA Model: CNC BOSS 542 / 44 Year 2000 Capacity: For bars from 5 to 42mm Maximum length: 4400mm Nljdoiqx Uyspfx Ahnof Hexagonal bar diameter: 4.4mm - 36mm Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.

Condition: used, Bar Feeder, Automatic Bar Feeder, Used Machine Manufacturer: IEMCA Model: Master 100 F/R Overall Dimensions: Width: 4900 mm Depth: 1115 mm Height: 1800 mm Weight: 2200 kg Year of Manufacture: 2012 Electrical Data: 400V; 8.4A Bar Diameter Range: 10–100 mm Bar Length: 1100–4200 mm Maximum Bar Weight: 180 kg Maximum Feeding Speed: 500 mm/sec Nedpfx Ahoxab Adenslf Magazine Types: UP: 500 mm usable length MP: 290–330 mm F: 2.5-ton stacked magazine Changeover Time: 31 seconds Installed Power: 1.5–3 kW Pneumatic System Pressure: 6 bar

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] POWER SUPPLY Nledpfxszbnb Do Ahnof - Supply voltage : 400 [V]

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] Nodjzbnb Ropfx Ahnelf POWER SUPPLY - Supply voltage : 400 [V]

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] Nedpfxjzbncbs Ahnslf POWER SUPPLY - Supply voltage : 400 [V]

Condition: used, TECHNICAL DETAILS - Bar diameter : 5 - 51 [mm] - Bar length : 3200 [mm] Nledoym D Siopfx Ahnsf POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4080 x 1200 [mm] - Machine height : 1750 [mm] - Machine weight : 830 [kg]

Condition: good (used), -KOM 3005- We offer here a used bar feeder for lathes. Technical data Machine dimensions: (w x d x h) approx. 3850 x 700 x 1300 mm Power connection / control voltage: 220 Volt / 50 Hz Nlodpfx Ahjurldcsnef Machine no.: 90042033 Remarks: The machine is under power in our warehouse and is ready for demonstration