Used Bbs 550 for sale (2,858)

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned Gjdpfx Anoyt Nvtoxoub - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: used, Year of construction: 1955, groove width 90 mm drawing length 550 mm table surface area 400x300 mm a lot of tools Gjdpfx Aey D A Dyjnxoub

Condition: good (used), functionality: fully functional, overall weight: 105 kg, total height: 1,400 mm, total length: 1,850 mm, total width: 1,150 mm, miscellaneous Hydraulische Baumschere mit Säge für Manitou Producing company Dorfmeister Type Holz Fällgreifer SS 550 Height (mm) 1,400 Length (mm) 1,850 Gedpfsyhhvzjx Anxeub Weight (kg) 105 Width (mm) 1,150

Condition: good (used), mileage: 5,00,000 km, power: 471 kW (640.38 HP), fuel type: diesel, tire size: 385/65R 22.5, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: white, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 15,300 kg, Year of construction: 2016, Equipment: AdBlue, retarder, = Additional Options and Accessories = - PTO = Notes = Colour: White Details Manufacturer: MAN Model: TGX 41.640 8x4-4 BBS Chassis number: WMA86XZZ5HL073244 Year: 2016 Mileage: approx. 500,000 km Engine: D3876LF03 / 640 HP / EURO 6 / Diesel / SCR, 3,000 Nm CR Transmission: MAN TipMatic 12 30 OD / Converter-Clutch with retarder 40 First axle: 9,000 kg | leaf suspension | 385/65R 22.5 Second axle: 8,000 kg | air suspension | 385/65R 22.5 Rear axles: 15,300 kg | leaf suspension | driven | hub reduction | 315/80R 22.5 Guodpfjx R Tupsx Anxsb GVW: 35,000 kg GCW: 250,000 kg Equipment 960 L fuel tank 80 L AdBlue tank JOST JSK 38G 3.5" fifth wheel Manual sliding fifth wheel Rockinger RO56E coupler Front push coupler Work lights Toolboxes Axle ratio I = 4.83 Heavy-duty cooler PTO hydraulics + 290 L tank Axle load indicator Cab XXL cab Multi-function steering wheel 500 mm steering wheel Cruise control Sun visor 2 x beds Comfort seats Climate control Roof hatch Storage boxes Radio CD player / Bluetooth = Further Information = General Information Year of manufacture: 2016 Transmission Transmission: MAN TipMatic 12 30 OD / Converter-Clutch with retarder 40 Axle Configuration Front axle: Tyre size: 385/65R 22.5; Max. axle load: 9,000 kg; Steered; Suspension: Leaf spring Rear axle 1: Tyre size: 385/65R 22.5; Max. axle load: 8,000 kg; Steered; Suspension: Air suspension Rear axle 2: Tyre size: 315/80R 22.5; Twin tyres; Max. axle load: 15,300 kg; Reduction: outer planetary axles; Suspension: Leaf spring Rear axle 3: Tyre size: 315/80R 22.5; Twin tyres; Max. axle load: 15,300 kg; Reduction: outer planetary axles; Suspension: Leaf spring Weights Payload: 250,000 kg Gross vehicle weight (GVW): 35,000 kg Condition Technical condition: good Optical condition: good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for further information.

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN Gsdpfsd Ih Stox Anxsub throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Year of construction: 2025, condition: used, We are offering this used M.S.K. OMRM 133 OMRM133 automatic double-head PVC alu machine, diameter 550 cm, year of manufacture 2025. Model: OMRM 133 Serial number: 25DCM330004 Production date: 2025 Power: 6.5 kW Voltage: 400 V Frequency: 50 Hz Current: 32 A Air pressure: 6-8 bar Air consumption: 95 l/min Weight: 1220 kg Width: 1985 mm Length: 8110 mm Gjdpfxsy Encwj Anxjub Height: 1895 mm Country of origin: TURKIYE If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, machine/vehicle number: 20308, gr. swing Ø: 600 mm Centre distance: 2200 mm gr. grinding-Ø with grinding wheel 800 mm Ø: 125 mm grinding wheel Ø when using the setting sticks: 20 - 125 mm grinding wheel dimensions: 800 x 28 - 800 x 42 x 305 mm Guodpfjcik N Ssx Anxob 2 grinding wheel speeds 3 workpiece speeds: 32, 55 and 96 rpm table shift by hand coarse/fine: 10/2 mm automatic. Feed speed of grinding wheel: 0,005 - 0,025 mm 6 table speeds: 120 - 1540 mm/min Grinding headstock drive: 8 kW electrical connection: 380/400 V, 10 kW space requirement : 6100 x 2300 x 1600 mm weight : 7 t

Condition: good (used), Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber wheel, solid rubber bandage -Tire size: Ø 550 mm -Inner diameter: 340 mm -Number: 3 tires available Gusdpfx Asywg Nasnxob -Price: per piece -Dimensions: Ø 550 x 110 mm -Weight: 14 kg/pc.

Condition: used, Year of construction: 2005, Technical details: x-travel: 2200 mm y-travel: 2200 mm z-travel: 1400 mm spindle taper ISO: 50 spindle diameter in front bearing: 110 mm spindle turning speed range: 45 - 6000 U/min pallet table size: 1000 x 1250 mm pallet worktable capacity: 6000 kg feed range: 1 - 60000 rapid traverse: 60 m/min spindle drive motor: 27 kW dimensions of the machine ca.: 15 x 8,5 x 5,7 m total power requirement: 133 kVA Gusdjvgmitepfx Anxob weight of the machine ca.: 50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm *

Condition: good (used), Year of construction: 2019, For sale is a used Format4 Kappa 550 panel saw with a cutting length of 2800 mm. The machine has been refurbished by our service team and is fully operational. Technical data: - Cutting length: 2800 mm - Cutting width: 1000 mm - Cutting height: 202 mm - Max. saw blade diameter: 550 mm - X-motion control Guedpfx Aoytrq Hjnxob - Mitre guide with length compensation - Suction port diameter: 120 mm - Motor power: 7.35 kW / 10 HP - Year of manufacture: 2019 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, format saw Reference: R-J04DD

Condition: good (used), Containers, granule containers, storage tanks, powder containers, paint powder containers, storage containers, silo systems, tanks, silos, polypropylene containers -Silo system: Granule container, polypropylene container with fill level indicator -Capacity: approx. 550 liters -Container: Stainless steel Guedpfx Aneyv Au Noxjb -Dimensions: see photos / technical drawing -Dimensions: 1015/760/H975 mm -Weight: 84 kg

Condition: good (used), Containers, granule containers, storage tanks, powder containers, paint powder containers, storage containers, silo systems, tanks, silos, polypropylene containers -Silo system: Granule container, polypropylene container with fill level indicator Godpfx Ansyv Atxjxsub -Capacity: approx. 550 liters -Container: Stainless steel -Dimensions: see photos / technical drawing -Dimensions: 1000/760/H890 mm -Weight: 79 kg

Condition: ready for operation (used), * Idlers: with rolls * For Belt: 800 mm * Rolls with size: 240 mm x 390 mm x 240 mm * ∅: 133 mm * Price: €38 a Piece * On stock: 290 pieces. Gjdoywl T Ropfx Anxsub

Condition: ready for operation (used), * Idlers: with rolls * Type: heavy duty * For Belt: 800 mm * Rolls with size: 275 mm x 430 mm x 275 mm * Ø: 150 mm * Price: €45 a Piece * On stock: 200 pieces. Gjdpfjywl T Dox Anxsub

Condition: ready for operation (used), * Idlers: with rolls * For Belt: 1000 mm * Rolls with size: 220 mm x 650 mm x 220 mm * ∅: 89 mm * Price: €30 a Piece * On stock: 560 pieces. Guodpeywl Twofx Anxjb

Condition: ready for operation (used), * Idlers: with rolls * For Belt: 1000 mm Gjdpfx Anjywl Tqoxoub * Rolls with size: 380 mm x 133 mm * Price: €36 a Piece * On stock: 500 pieces.

Condition: ready for operation (used), * Idlers: with NEW rolls * For Belt: 1200 mm * NEW Rolls with size: 465 mm L x 89 mm ∅ * Price: €56 a Piece * On stock: 250 pieces Guodpfxjywl Tke Anxjb

Condition: ready for operation (used), * Model: suspended idlers * For Belt: 1200 mm * Rolls with size: 465 mm L x 133 mm ∅ * Price: €36 a Piece Guodpfx Aneywl Tdoxeb * Stock: 300 pieces.

Condition: ready for operation (used), * Model: suspended idlers Guodpfx Ansywl S Texob * For Belt: 800 mm * Rolls with size: 315 mm L x 108 mm ∅ * Price: €28 a Piece * Stock: 1050 pieces.

Condition: good (used), clearance 88mm diameter of rotation without chuck 1000mm with chuck 700mm machine dimensions: l2500mm x w1400mm x h1540 rpm 11.2 / 1000rpm Guodpfxsw Rch Ro Anxob automatic feed on X and Z axis

Condition: like new (used), functionality: fully functional, Year of construction: 2023, The RM Super Rain 890 GX 110/550 is a hose reel irrigator (reel system) from the Super Rain / GX series by the Italian manufacturer RM Irrigation. The designation 110/550 refers to a hose with a diameter of 110 mm and a length of 550 m. It is designed for irrigating large agricultural areas. Gjdpfxsxgha No Anxsub

Year of construction: 2026, condition: used, New: Yes Empty weight: 110 kg Dimensions of cargo space: 60 x 40 x 100 cm CE mark: yes Serial number: DPX-27509 Gusdpfsy Dnv Ujx Anxeb Please contact Team DPX for more information Automatic Transfer Switch - ATS Panel - ATI Panel 800 Ampere - Applicable for generators up to 550 kVA

Condition: used, mileage: 1,49,865 km, power: 118 kW (160.44 HP), first registration: 09/2012, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,330 mm, loading space height: 500 mm, Equipment: ABS, crane, electronic stability program (ESP), Iveco ML 75E16 Meiller three-way tipper with a Palfinger crane. 5 + 6 control circuit for grab control. German vehicle from 1st hand, 3 seater and a payload of 2,470 kg - Meiller 3 side tipper - Palfinger PK 4200 - 2x hydraulic extensions - Working height 11 m - 3.40 m ? 990 kg - 4,90 m ? 760 kg - 6,40 m ? 550 kg - 1x mechanical extension - 8,00 m ? 420 kg - 5 + 6 control circuit for grapple control - Radio CD - EURO 6 - Body dimensions - 3,600 length x 2330 width x 500 height - Wheelbase 3,000 mm - Payload 2,470 kg Gsdpfx Ansyz H E Asxsub - Financing available through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: excellent (used), mileage: 1,55,000 km, power: 471 kW (640.38 HP), fuel type: diesel, tire size: 385 / 65R 22,5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: beige, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2019, Equipment: AdBlue, retarder, Gearbox model: MAN TipMatic 12 30 OD Heavy-Duty with Retarder 35 Color: Yellow Details Manufacturer: MAN Model: TGX 33.640 6x4 BBS Chassis number: WMA26XZZ0KM837606 Year of manufacture: 2019 Mileage: approx. 155,000 km Engine: D3876LF09 | EURO 6 | Diesel | 640 HP Transmission: MAN TipMatic 12 30 OD Heavy-Duty with Retarder 35 Front axle: 9,000 kg | Leaf suspension | 385 / 65R 22.5 Second axle: 13,000 kg | Leaf suspension | 315 / 80R 22.5 | Hub reduction Rear axle: 13,000 kg | Leaf suspension | 315 / 80R 22.5 | Hub reduction Wheelbase: 3,900 mm GVW: 33,000 kg GCW: 120,000 kg Equipment Large fuel tank AdBlue tank 24-volt electrical system JOST JSK 38 C 3.5" NATO socket Rear Rockinger coupling MAN TipMatic with Retarder MAN EasyStart Master switch Work lamps Tool boxes Cabin Sleeper cab Multifunction steering wheel Cruise control Sun visor 2 x Bed Comfort seats Refrigerator Storage compartments Climate control Radio CD player / Bluetooth = Further Information = General Information Year: 2019 Transmission Transmission: MAN TipMatic 12 30 OD Heavy-Duty with Retarder 35, 12 speeds, automatic Axle Configuration Suspension: Leaf suspension Front axle: Tire size: 385 / 65R 22.5; Max. axle load: 9,000 kg; Steering axle Rear axle 1: Tire size: 315 / 80R 22.5; Dual wheels; Max. axle load: 13,000 kg; Reduction: outer planetary axles Rear axle 2: Tire size: 315 / 80R 22.5; Dual wheels; Max. axle load: 13,000 kg; Reduction: outer planetary axles Guedpfx Ajv Iz S Esnxsb Weights Payload: 120,000 kg gross vehicle weight: 33,000 kg Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information For more information, please contact Stefan Schaapveld.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, controller manufacturer: HAAS, controller model: n/a, total height: 1,473 mm, table load: 1,350 kg, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Gusdpox D Eg Ujfx Anxob Dimensions Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes