Used Beer Tank 500 Litre for sale (26,247)

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Butterfly valve Design: oval Remarks: 1 manhole in the front end; Tank 1 equipped with stacking device (can be used to stack Tank 2, which does not have a stacking device); Both vessels were professionally cleaned and overhauled in 2024; Brand new residual drain valves (DN 50 DIN 11851 with butterfly valve; actual tank outlet with smaller diameter, presumably DN 40) and manhole gaskets installed; Tanks have minor dents on the shell Overall width: 730 mm Overall height: 1,850 mm Overall length: 2,800 mm Location: External storage 89340 Leipheim Volume: 2,500 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Last application: wine storage Hodpfeyckh Asx Aa Soff VESSEL Base design: on feet Number of feet: 4 MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 7,500 l, GENERAL Design: horizontal Outer diameter: 1,400 mm Overall height: 2,120 mm Overall length: 5,500 mm Location: outdoor storage Nameplate: Volume: 7,500 liters Cylinder wall thickness: 4 mm Product-contact material: V2A 1.4301 (AISI304) Hsdoyckkqepfx Aa Sjff Condition: used TANK Max. permitted operating temperature: 50 °C Ends: Klöpper head Support type: welded saddles Number of supports: 2 pieces EQUIPMENT Manhole / dome: in the cylinder Outlet: 50 mm TECHNICAL DATA / DIMENSIONS Ground clearance: 300 mm Bottom head thickness: 4 mm Top head thickness: 4 mm

Condition: used, tank capacity: 3,500 l, GENERAL Equipment: Ball valve Design: Vertical Remarks: 1 larger dent at the transition from cylinder to top head; small dents in cylinder; base reinforcements made of Fe; discharge extension bent Speed: 910 rpm Hfodpfx Aoyclp Usa Ssf Internal diameter: 1,500 mm Total height: 3,050 mm Power: 1.5 kW Top head: welded lid with folding segment Agitator: Propeller type Location: Bremen Volume: 3,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,000 mm Last application: Chemicals TANK Mounting: Feet Number of feet: 4 EQUIPMENT Discharge outlet: 48 mm Remarks: slight residues MATERIAL SPECIFICATION Outer surface: marbled Foot material: Stainless steel AGITATOR Voltage: 220/380 Volts Interference suppressor: Agitator arrangement: central on top head

Condition: used, tank capacity: 50,000 l, GENERAL Hfsdpfx Aaeyckpts Sjf Design: upright Remarks: exact dimensions may vary slightly; the riveted insulation is damaged in some areas (see images); the base of the tank is filled with concrete External diameter: 3,100 mm Total height: 9,000 mm Insulation: present Location: outdoor storage Volume: 50,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: vapor condensate tank (dairy) INSULATION Insulation jacket: riveted EQUIPMENT Manhole / dome: in the cylinder Note: slight residues

Condition: used, tank capacity: 5,000 l, GENERAL Design: upright Notes: Manhole approx. 320 x 420 mm; tanks are partially marbled on the outside; the foot lengths on the individual tanks differ slightly (usually one foot is shorter than the other two; the feet should be modified or shimmed accordingly before reinstallation); one tank has a small dent in the upper cylindrical area (see photos) Internal diameter: 1,370 mm Hfodpfx Ajyckqdoa Sjf Total height: 3,950 mm Location: Bremen Volume: 5,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Previous application: winery TANK Support type: feet Number of feet: 3 pcs EQUIPMENT Manhole / access hatch: in the cylinder Outlet: 90 mm Note: slight residues MATERIAL SPECIFICATIONS Foot material: stainless steel

Condition: used, tank capacity: 1,500 l, GENERAL Design: upright Speed: 1,420 rpm External diameter: 1,250 mm Overall height: 2,200 mm Power: 1.50 kW Agitator type: propeller Number of agitators: 2 agitators Location: outdoor storage Hfsdpfx Aasyckwdo Sjf Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm TANK Bottom: Klöpper bottom Support type: lugs EQUIPMENT Outlet: 80 mm Note: slight residues AGITATOR Voltage: 220/380 Volt Agitator configuration: Agitator mounted eccentrically on welded traverse

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Disc valve Design: upright Remarks: 1 manhole approx. 310 x 410 mm located in the cylinder; 1 bolted outlet fitting with disc valve increases the outlet to DN 50 DIN 11851; tank was professionally cleaned and overhauled in 2024; brand new drain valves and manhole gaskets installed Internal diameter: 1,230 mm Overall height: 2,950 mm Location: Bremen Nameplate: Volume: 2,500 liters Cylinder wall thickness: 4.0 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,910 mm Last application: wine storage TANK Supporting type: legs Number of legs: 3 pieces EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN40 DIN 11851 Hfsdpfx Aeyckhvea Ssf MATERIAL SPECIFICATION Leg material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.3 mm Top wall thickness: 4.5 mm

Condition: used, tank capacity: 11,500 l, GENERAL Equipment: Crane lugs Design: Vertical Internal diameter: 2,490 mm Total height: 3,000 mm Location: Bremen Nameplate: Volume: 11,500 litres Cylinder wall thickness: 2.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,770 mm Previous application: Ethanol TANK Support type: Feet Number of feet: 4 pcs EQUIPMENT Manhole / Dome: in the cylinder (approx. 340 x 440 mm) Outlet: DN65 DIN 11851 Note: slight residue MATERIAL SPECIFICATION Feet material: Stainless steel Hfsdpfjyck Ntsx Aa Sof TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.8 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Level indicator (no guarantee), lifting lugs Design: suspended Remarks: 3 support brackets, V2A; manway flange made of Fe Internal diameter: 1,300 mm Total height: 2,850 mm Location: Bremen Technical documentation: Drawing Nameplate: Volume: 2,500 liters Cylinder wall thickness: 4 mm Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 1,760 mm Previous use: Pharmaceutical chemicals CONTAINER Hfodpfxsyck T Ss Aa Sof Support type: Brackets EQUIPMENT Manhole / Dome: In top head (DN 600) Outlet: Flange DN100 Note: Slight residues TECHNICAL DATA / DIMENSIONS Head wall thickness: 3.9 mm

Year of construction: 2000, condition: used, tank capacity: 3,500 l, GENERAL INFORMATION Equipment: Ventilation/inlet and outlet, Spray head, Lifting lugs Design: Vertical Year of manufacture: 2000 Remarks: Feet were originally mounted on load cells, which are no longer present (see photos); According to the nameplate, heating coil is rated for an operating pressure of 3 bar at a temperature of -5°C (see nameplate photos); Manhole diameter 430 mm; Manhole cover suspension incomplete Speed: 910 rpm External diameter: 1,560 mm Internal diameter: 1,350 mm Total height: 3,450 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Max. allowable operating overpressure: 3.0 bar Agitator: Propeller Mounting type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 3,500 liters Double jacket volume: 62.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,500 mm Last application: Laboratory production TANK Bottom: Flat bottom with slope Number of feet: 3 pcs INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: On top cover Outlet: DN40 DIN 11851 MATERIAL CHARACTERISTICS Feet material: Stainless steel Hfjdpfx Aajxqc Sue Sef AGITATOR 1 Voltage: 230/400 volts Agitator arrangement: Side-mounted on the cylinder

Condition: used, tank capacity: 5,000 l, GENERAL Design: vertical Remarks: Frame construction of the legs made of Fe (see photos); calotte bolts of the legs missing; manhole diameter 450 mm Inner diameter: 1,990 mm Total height: 2,650 mm Agitator: agitator flange Support type: legs Location: Bremen Volume: 5,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,650 mm Previous application: fruit juice industry TANK Bottom: dished bottom Number of legs: 3 pieces EQUIPMENT Manhole / dome: in top head Hfedpfxjxqc Tls Aa Sef Outlet: 50 mm MATERIAL QUALITY Legs material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 2,500 l, GENERAL Construction type: upright Remarks: manhole diameter approx. 390 mm Speed: 950 rpm Internal diameter: 1,590 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,850 mm Hedexqdkrjpfx Aa Sjff Power: 9.7 kW Agitator: propeller Base type: feet Location: Bremen Volume: 2,500 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,200 mm Last application: cosmetics TANK Number of feet: 4 pcs EQUIPMENT Manhole / access dome: on top head Outlet: DN50 DIN 11851 Note: slight residue inside MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Voltage: 380 volts Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Bracing between the feet made of standard steel (see photos) Inner diameter: 2,200 mm Hfodpexqcpgefx Aa Sef Total height: 5,900 mm Heating/cooling: available Max. permissible operating temperature: 3 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 1.0 bar Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 15,000 liters Double jacket volume: 30.0 liters Cylinder wall thickness: 3.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,360 mm Last application: brewery TANK Max. permissible operating temperature: 25 °C Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 Note: slight residues MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.4 mm

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Hjdpfx Aajg A Hc Ho Ssff

Condition: good (used), Item: AH-10282-Horizontal-Tank3500L Exterior dimensions: W 1850 mm L 2300 mm H 2100 mm. Insolated stainless steel tanks - 2 pcs. Identical Hjdpfxsikfm No Aa Soff 3” outlet. Various inlet. Manhole at front Ø400. AISI 304

Condition: like new (used), Chemineer Ltd PD5M mixing tanks Hfodpjkl Hq Nefx Aa Sef Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Capacity: 1,320.9 gal Hedpfjykn Rdex Aa Sjff Internal pressure: 96 PSI Jacket Pressure: 95.9753 Material of Construction: Glass lined steel

Year of construction: 2025, condition: good (used), Item: AV-11667-Vertical 35m3 Exterior dimensions: Dia Ø 2700 mm Total H 8000 mm. Cylinder height 6000 mm. Hfjdpsigq D Hjfx Aa Sjf NEW - Vertical stainless steel tank - 1 pc. Manhole bottom and conical top and bottom. Can be delivered on legs/bottom skirt and opportunity for new isolation completed with optional trapez plates. AISI 316.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product Type: Storage / Process Tank Nominal Volume: 3,500 litres Total Volume: 4,082 litres Jacket Volume: 226 litres Empty Weight: approx. 1,760 kg Product-contacting Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: 1.4404 CE Marking: CE 0036 Hfsdoylnwyjpfx Aa Ssf Permissible Pressure PS (Tank): -1 / +3 bar Permissible Pressure PS (Jacket): -1 / +6 bar Test Pressure PT (Tank): 5.6 bar Test Pressure PT (Jacket): 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Designed in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully inspected and released by the manufacturer. Tests carried out include: • Pressure test as per PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing check (as-built) • Review of material certificates • Calibration check of manometers • Verification of markings • Documentation review as per inspection checklist Full FAT and TÜV inspection reports available. EXECUTION • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-quality pharmaceutical design • Manhole with round pressure closure • CIP pipework • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – complete and well-structured • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Manometer calibration reports • Surface and production reports • Parts list • Detailed drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never put into operation • Was in storage • Interior surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and waste management plants SPECIAL FEATURE Premium BRINOX pharmaceutical-grade manufacture with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4404 – PED Module G – TÜV – FAT – 2020 – As New Hfsdpeylnppsfx Aa Ssf Manufacturer: BRINOX d.o.o., Slovenia Type: SVBBH-3500 Tag no.: Serial number: 1003461 Year of manufacture: 2020 Condition: As new / unused BH6771-BH1001 Package 29 TECHNICAL DATA Product type: Storage tank / process vessel Nominal capacity: 3,500 liters Total volume: approx. 4,082 liters Empty weight: approx. 1,750 kg Material in contact with product: 1.4404 (AISI 316L) Internal surface: electropolished Surface roughness: tested according to roughness protocol (Ra ≤ 0.8 µm) Permissible pressure PS, vessel: -1 / +3 bar Test pressure PT, vessel: 5.6 bar Permissible pressure PS, jacket: -1 / +6 bar Test pressure PT, jacket: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – single item inspection CE marking FAT – Factory Acceptance Test Full FAT inspection carried out on 26.08.2020. Documentation check: complete and released Welding documentation inspected and compliant Delta ferrite inspection conducted, no deviations Surface roughness checked and compliant All inspections rated “OK”. EXECUTION • Horizontal cylindrical pressure vessel • Dished heads • Multiple CIP connections on end face • CIP spray ball system • Manhole with round pressure cover • Pressure and temperature connections • Bottom discharge outlet • Stainless steel support legs • Pharmaceutical-grade weld seams DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificate • Module G individual inspection • FAT protocols • Welding documentation • WPQR / WPS • 3.1 Material certificates • Non-destructive test reports • Delta ferrite test report • Roughness protocol • Dimensional accuracy report • Calibration certificates • Technical drawings • Parts list • Operating and maintenance manual Complete digital documentation folder available. CONDITION • Never in productive use • Stored item • Interior surface in absolutely as-new condition • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURE Custom-manufactured BRINOX pharmaceutical tank with full FAT acceptance, verified welding documentation, delta ferrite certification, documented surface roughness, and comprehensive PED Module G single-inspection. Not a standard tank – but pharmaceutical grade suitable for validation, with complete technical documentation throughout.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Process Vessel – 1.4435 – Jacketed – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6722-BH1001 Year of manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Product type: Main/process vessel Design: Cylindrical with dished ends Working volume: 94 – 1,500 liters Empty weight: 866 kg Product contact material: 1.4435 Jacket material: 1.4307 Insulation: yes Operating pressure (vessel): -1 / +3 barg Permissible pressure (PS): -1 / +3 barg Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 °C / +150 °C Date of pressure test: 2020/04 Pressure vessel according to PED 2014/68/EU Category IV Assessment procedure: Module G Notified body: TÜV SÜD Industrie Service GmbH Design code: AD 2000 SURFACES & WELDS Internal surface: Electropolished and passivated Pharmaceutical grade External surface: Industrial ground finish NDT / Inspections: RT (radiographic testing) PT (penetrant testing) Pressure testing documented 2020 EQUIPMENT • Double jacket for heating/cooling • Large frontal manway • Multiple process nozzles • CIP connections • Temperature and pressure ports • Safety fittings • Agitator mount • FDA-compliant seals • Complete piping module Hfedpfxeykuc Ts Aa Ssf CONDITION • Never used in production • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • Available immediately DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificates and inspection reports • PED Module G documentation • Material certificates 3.1 (EN 10204) • Welding logs • NDT reports (RT / PT) • 2020 pressure test report • Surface reports • Detail and assembly drawings • FAT documents • Operating and maintenance manuals SPECIAL FEATURE BRINOX pharma process vessel in 1.4435 with electropolished internal surface, AD2000 design, PED Category IV Module G, full TÜV inspection 2020, and complete technical documentation. Project quality for sterile applications – immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Main Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – As New Hfsdpoykn Iijfx Aa Ssf Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Package 22 Serial Number: 1003457 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Product Type: Main precipitation vessel / process vessel Nominal Volume: 1,500 liters Total Volume: 1,785 liters Empty Weight: approx. 866 kg Product-contact Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: Stainless steel Operating Pressure (Vessel): –1 / +3 bar Test Pressure (Vessel): 5.4 bar Operating Pressure (Jacket): as per design Temperature Range: –10 °C to +150 °C Pressure Vessel in accordance with PED 2014/68/EU Module G – Individual inspection Approval by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel underwent a complete documented FAT at the BRINOX plant. Tests performed included: • Delta ferrite test of weld seams (conforming, no deviations) • Surface roughness check (Ra internal ≤ 0.8 µm, conforming) • Visual inspection of all product-contact surfaces • Pressure test as per specification • Documentation review • GMP deviation management (only non-critical points, fully resolved) • Measuring instruments with valid calibration certificates DESIGN • Double jacket for heating/cooling • Horizontal design • High-grade pharmaceutical finish • Fully constructed from 316L stainless steel in product-contact areas • Mirror-polished internal surface • GMP-compliant, documented weld seams • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Prepared for instrumentation (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flange base • Lifting lugs and transportation version • Project-specific build for CSL Behring (Project SPHINX) CONDITION • Never in productive use • Direct from project surplus • Absolutely as-new interior • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION Complete project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection documents • PED Module G documentation • 3.1 material certificates • Welding documentation (WPS/WPQR) • Delta ferrite test protocols • Roughness measurement protocols • Calibration certificates for measuring instruments • GMP deviation protocols • Fully signed FAT protocols • Operating and maintenance manuals All documentation is complete and well-structured. • Pharmaceutical active substance processes • Precipitation and reaction processes • Buffer and solution preparation • Sterile liquid processes • Biotechnology • GMP production facilities • Ultra-pure media SPECIAL REMARKS This is a high-quality BRINOX process vessel in true pharmaceutical project quality, built for CSL Behring, with full PED Module G individual inspection, FAT 2020 documentation, and comprehensive GMP documentation. Not a standard tank, but certified project quality for sterile applications. Immediately available.

Year of construction: 2022, condition: new, Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act Dear Sir or Madam, we offer a 50,000 liter double-walled storage tank for the storage of heating oil and diesel. Nominal capacity 50 cbm new color equipment paint RAL ; 7035 Material steel in steel, material S235JRG2 Documentation Manufacturer's certificate/ dipstick plate piece 1 dipstick Piece 1 air vent Hsdpfx Aajh Um Ehj Soff Piece 1 filling nozzle Piece 1 new limit switch Ccrhmfhmam piece 1 new leak detection sight piece 1 ladder piece 1 suction line tank dimensions approx . 10900 mm diameter approx. 2.500 mm Weight approx. 9.000 kg Storage above ground Delivery time = September With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2002, condition: refurbished (used), Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act Dear Sir or Madam, we offer a 5000 liter double-walled storage tank for the storage of heating oil. Nominal capacity 5 cbm new color equipment paint RAL ; 7035 Material steel in steel, material S235JRG2 Documentation Manufacturer's certificate/ nameplate Piece 1 dipstick Piece 1 air vent Piece 1 filling nozzle Piece 1 new limit switch piece 1 new leak detection sight piece 1 ladder Hsdpsh U Azvofx Aa Seff Piece 1 suction line tank dimensions approx. 2750 mm diameter approx. 1.600 mm Weight approx. 1200 kg Storage above ground Delivery time = 14 days With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: used, Year of construction: 1987, Manufacture : Goavec SA Year : 1987 Previous application: Cream tank (fluid/thick) Volume : 5000 Litres Material : 304 stainless steel (Thickness : 25/10) Jacket + insulation Pressure inside tank: + 0.1 bar Jacket pressure: 3.5 bar (water) / 2 bar (steam) Agitation : 1.8 KW - 41 rpm 1 fixed paddle: counter-stirring Hfodpfx Aaex R Dkbe Sof Wash balls: 2 units Inspection hatch: manhole Removable guardrail Drawing available (digital version)