Used Berger for sale (286)

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor Lrjdpfsxamghox An Iep -Manufacturer: ABM Greiffenberger, gear motor 4 rpm -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 -Dimensions: 705/305/H400 mm -Weight: 106 kg

Condition: good (used), Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm Lodpsb A H Dhofx An Ierp -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Lsdpeya Dagefx An Iorp Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Year of construction: 2020, condition: ready for operation (used), A Guggenberger chamber washing machine is available. Number of wash carts: 8, wash cart capacity: 8 pallets, pallet dimensions X/Y/Z: 1200mm/800mm/160mm, spray pump power: 11kW, fan capacity: 4000m³/h, operating hours: approx. 4350h. Including rotary nozzles, spin drying unit, tilting device, exhaust fan with steam damper, condensate separator, gloss drying, tank heating with booster, compact belt filter system, oil skimmer and steam condensator. Documentation available. An on-site inspection is possible. Lrsdszlt N Hspfx An Ijp

Condition: used, Year of construction: 1980, Round grinding machine (internal and external) KELLENBERGER 1000 U-175, serial no. 32460-2247, year of manufacture 1980, max. grinding length 1,000 mm, max. diameter 350 mm. Ledpfezlpr Djx An Iorp

Condition: excellent (used), Kellenberger 1000U cylindrical grinding machine with many accessories available at a low price. This machine is in very good condition and is fully functional. It was purchased as a completely overhauled unit in 2019. Price greatly reduced!!!!! Lsdpfx Answkt Euo Isrp

Condition: used, functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Lrjdpfxjw Dy Rqs An Isp

Condition: good (used), functionality: fully functional, Used Kellenberger cylindrical grinding machine for sale in very good condition. Price significantly reduced !!!!! Lsdpfx Asw Dzbden Iorp

Condition: used, functionality: fully functional, For sale is a high-precision universal and tool grinding machine, Strausak AG, Type 57U. Thanks to its versatile design with a cross table, it is ideal for tool, mold, and gauge manufacturing. It handles demanding grinding tasks on highly hardened workpieces (even in the range of 60–65 HRC) with absolute reliability. The spindle speed can be flexibly adjusted, and the maximum longitudinal travel of the X-axis is 600 mm with a center distance of 780 mm. The machine is in good condition. Machine Type 57U Lredjv E Ivfspfx An Iop Manufacturing No. (Serial Number) 10686 Order No. 44137 Voltage (Volts) 380 V Frequency (Hz) 50 Hz Technical Feature Specification Max. Table Stroke / Longitudinal Travel (X-axis) 600 mm Center Distance (Workpiece Length max.) 780 mm Center Height 125 mm – 175 mm (depending on height blocks) Max. Grinding Diameter approx. 348 mm Table Dimensions 1,030 mm x 214 mm Table Swivel Range ± 9° Machine Weight (Net) approx. 2,500 kg (Shipping Weight approx. 2,700–2,800 kg) Net Machine Dimensions (L x W x H) approx. 2.30 m x 1.50 m x 1.50 m Recommended Space Requirement (Installation) at least 3.50 m x 2.50 m Spindle Speeds Continuously variable / Belt stages from 2,250 to 6,000 rpm Table Feed Continuously adjustable from 0 to 16 mm/min Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock Lrsdpfx Aozkvucjn Isp -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Ljdpjzc D Dqjfx An Ierp Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: Ledpfx Anozc D Dke Ijrp The machine can be viewed while powered up.

Year of construction: 2006, operating hours: 45,852 h, condition: ready for operation (used), travel distance X-axis: 380 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 280 mm, controller manufacturer: FANUC, controller model: Series 160i-MB, overall weight: 8,000 kg, total width: 1,765 mm, total height: 2,200 mm, spindle motor power: 9,000 W, product length (max.): 2,500 mm, spindle speed (max.): 6,000 rpm, number of axes: 5, This 5-axis Schneeberger Sirius HPM was manufactured in 2006. It features a powerful control unit, GE Fanuc Series 160i-MB, and operates with grinding oil. The machine is equipped with an Absolent A5 oil mist extraction system for enhanced performance. If you are looking to get high-quality grinding capabilities, consider the Schneeberger Sirius HPM surface grinding machine we have for sale. Contact us for further details. Ljdpfxozdt H Ne An Ijrp - Control Unit: GE Fanuc Series 160i-MB / Quinto 4- Operating Medium: Grinding oil- Automation: None / Without loader- Working Voltage: 3 x 400 VAC- Kind of Current: 3L + PE- Frequency: 50 Hz- Control Voltage: 230 VAC / 24 VDC- Rating: 48 kW / 41 kW- Rated Current: 83 A- Optional Equipment: Absolent A5 oil mist extraction system (visible mounted on top of the machine)- The spindle is present but needs to be repaired and is not currently running.- The frequency converter for the spindle is also not working.

Condition: refurbished (used), Kellenberger 1500 U-175 – High-Precision Universal Cylindrical Grinding Machine Universal cylindrical grinding machine for external and internal grinding (internal grinding attachment included). - Centre distance: 1,500 mm - Centre height: 175 mm - Complete retrofit, fully dismantled and rebuilt component by component: guideways reconditioned, bearings replaced, new electrical installation and control cabinet, complete repaint, and machine geometry restored to original factory precision. - Equipped with Siemens servo motor, frequency inverter and Fagor digital readout (Fagor). - Condition comparable to a new machine, ready for immediate production. - Available with a wide range of accessories. - Inspection and live demonstration under power available. Ljdpfxewqlyke An Ierp Availability: Immediate. 1000U version: Currently undergoing refurbishment.

Condition: new, Year of construction: 2026, OSTERBERGER KSBP 2500 Universal Brand new, combined universal wide belt sanding machine – brushing machine – polishing machine in a portal design. Sanding length and width can be customized according to customer requirements, including 2 parallel sanding belts for 2 workstations for pre-sanding and finishing without belt changes, as well as a brushing and polishing head with automatic longitudinal adjustment to the left and right. The machine is suitable for pre- and fine sanding, structuring (brushing) and polishing, as well as high-gloss polishing of surfaces made of various materials – coated workpieces, natural workpieces, various metal sheets made of stainless steel / aluminum / brass / copper / bronze, and various plastics. Combined wide belt sanding machine with brushing and polishing unit for workpieces up to 650 mm in height. Motorized movement of the brushing and polishing unit from left to right and back. Manual movement of the support table forwards and backwards. Motorized adjustment of the support table up and down. Lodpjzhkp Njfx An Iorp Work table size 2,500 x 1,000 mm (other sizes available upon request) Sanding belt dimensions 8,200 mm x 150 mm Drive power of the brushing and polishing unit 3 kW Drive power of the belt sanding unit 3 kW Dimensions approximately 4,200 x 1,600 mm x H 2,100 mm Weight approximately 1,000 kg Other sizes available.

Condition: new, Year of construction: 2026, control type: CNC control, KBA - Combined CNC-controlled press brake / guillotine shear Super-compact machine with a very small footprint. Maximum cutting length: 3,020 mm or 2,020 mm Rated cutting capacity: 6 mm steel sheet / ST 40 Cutting angle: 1°30″ Backgauge for the shear station – adjustment range: 750 mm Table height: 750 mm Maximum bending length between side frames: 3,550 mm or 2,505 mm Maximum pressing force: 1,000 kN Working height for bending: only 1,230 mm Stroke range (bending station): 175 mm Maximum installation height (bending station): 350 mm Backgauge adjustment range (bending station): 750 mm Dimensions including operator’s pendant: 4.25 or 3.25 m x 1.82 m x H 2.8 m Required floor space: 3.85 or 2.85 x 1.82 m Drive power: 10 kW Weight: 9,000 kg or 7,500 kg Equipment: - CNC control with touchscreen and 10” colour display, graphical user interface, and automatic bending angle calculation - 1 set of press brake tools (bending punch + four-way reversible die) Ledjzhklkspfx An Iorp - Sheet metal supports for the press brake station - 90° angle stop for the guillotine shear with 1 m length - Bending station working area safeguarding via light barriers, rear area safeguarded by lateral safety guards and light barriers Optional: - Front bending area guarding by PILZ® camera monitoring - Rotatable angle stop

Condition: new, Year of construction: 2026, Brand new precision vertical slotting machine – a machine of exceptionally high quality. CNC-controlled vertical slotting machine with two, three (or four) CNC axes and electronic rotary table control with a positioning accuracy of 0.001°. Ideal for the efficient production of keyways (including tapered and tangential slots), spline hubs, internal and external gears, racks, etc. Lredpfjzhkkyox An Iep CNC control with 10" color display and touchscreen – software for roughing, finishing, and fine finishing (enabling surfaces of the highest possible quality). Stroke range of slotting ram: 10 to 250 mm Slotting ram speeds: 22 to 90 strokes/min, infinitely adjustable Slotting ram swivel range: +/- 20° Rotary table diameter: 450 mm Rotary table bore Ø: 135 mm Maximum table load: 1,250 kg Table travel (X/Y): 250 x 225 mm Ram drive servomotor power: 3 kW Machine dimensions without control console: 1.3 x 1.45 m x approx. height 2.6 m Machine weight approx. 1,700 kg - Automatic electronically monitored central lubrication system for the guideways - Cutting oil system for coolant supply to the slotting tools Other models available.

Condition: new, Year of construction: 2026, OSTERBERGER HTAP.Servo Brand new 3-axis CNC press brake equipped with CYBELEC CNC control system CybTouch8, featuring automatic bend angle calculation, bend sequence computation, and full-color graphical display. Maximum pressing force: 630 kN Maximum bending length: 2,000 mm / 2,500 mm / 3,200 mm Distance between side frames: 1,580 mm / 2,080 mm / 2,700 mm Throat depth in side frames: 250 mm Ram stroke: 100 mm Maximum installation height: 320 mm Ram travel speeds: - Down: 50/6 mm/sec - Up: 60 mm/sec Table width: 160 mm Oil tank capacity: 120 liters Approximate dimensions: 2.6 / 3.1 / 3.6 m x 1.5 m x height 2.4 m Motor power: 5.5 kW Weight approx.: 4.8 / 5.5 / 6 t Two-axis precision back gauge - Adjustment range: 500 mm - R-axis: 90 mm Back gauge fingers glide on double linear guides Equipment: - Die block - Gooseneck bending punch - Quick-change upper tool system - 2 support arms on linear guides Lsdpfx Anjzhkiie Ierp - Bending area lighting

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm Lrsdpfx Aezhkgzjn Iep - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Various back gauge options available: - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining Lsdjzhkbfopfx An Isrp

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Lrjdpfx Aozhkazsn Iep Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: new, Year of construction: 2026, Three-axis CNC-controlled hydraulic press brake with servo drives + manual crowning system Axis - Y - (press beam up and down) Axis - X - (back gauge - forward and backward) Axis - R - (back gauge rail - up and down) Maximum pressing force 3000 kN (= bending 16 mm steel sheet S235jr over the entire bending length in a V-die with a width of 140 mm = inside radius 16 mm) Maximum bending length 2,500 mm Distance between side columns 1,700 mm Overhang in the side columns 400 mm Press beam stroke 300 mm Maximum possible installation height 520 mm Press beam travel speeds downwards 80 / 10 mm/sec - upwards 70 mm/sec Ledpfxozhi Ude An Ijrp Table width 400 mm Adjustment range of the back gauge forward and backward 550 mm – up and down 200 mm, oil tank capacity 250 liters Dimensions approximately 3.3 x 2.3 m x height 3.1 m Drive power hydraulic motor 22 kW Weight approximately 16,000 kg We also supply other model sizes.

Condition: new, Year of construction: 2026, CNC-controlled frame gluing press for gluing all types of frame constructions with dowel joints, mortise and tenon joints, and 45° miter joints. Manual centering of the left press plates, hydraulic centering of the right press plates, and hydraulic movement of the upper press beam. Maximum pressing area: 3,000 x 2,000 mm Two vertical press cylinders – pressing force per cylinder: 7.4 tons Two horizontal press cylinders, stroke: 150 mm – pressing force per cylinder: 2 tons. Maximum profile depth: 130 mm. Lodozhi Nbspfx An Ierp Positioning of the two right horizontal press plates by hydraulic cylinders. Positioning of the upper press beam by hydraulic cylinders. Technical data: Weight: 1,300 kg Drive power: 1.5 kW Dimensions: 3.8 x 1.2 x H 2.4 m - Control of the hydraulic movements digitally via the touch screen using softkey buttons - Programmable pressing programs – for pressing pressure and pressing time, automatic program-controlled opening of the press cylinders. Operator safety: Automatic locking of the upper press beam in the event of sudden pressure loss or when the machine is switched off.

Year of construction: 2017, condition: ready for operation (used), A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Ledpfxszhw Ryj An Ierp

Condition: excellent (used), PLASTIC PIPE CUTTER ROCUT 110 BY ROTHENBERGER 55035 ROTHENBERGER pipe cutter 50-110mm Manufacturer code 55035 Lrsdpsvb Ik Isfx An Isp TECHNICAL DATA pipe diameters - 50, 75, 110mm pipe chamfer angle - 15° . PRODUCT DESCRIPTION Tool designed for cutting and chamfering thin- and thick-walled PVC, PE, PE-X and PVDF pipes, as well as attenuated sewer pipes. Simultaneous chamfering around the entire circumference of the pipe through a steel cutting mandrel with an automatic kicker. Centric and secure clamping on the pipe taking into account the dimensional tolerance thanks to infinitely adjustable jaw pressure with spring compensation.