New hydraulic PU sandwich panel production press with 2 mold carriages and PLC control. Special production very accurate
Technical specifications:
Hajauwhgc
-Product dimensions: max. 1200x6000 mm
-Product thickness: max. 200 mm
- Stroke 380mm
-Closing force 280 tons, 3 kg / cm²
-8 pieces of hydraulic cylinders, stroke 380 mm
-300 lt hydraulic tank
-11 kW hydraulic drive
-Form car drives with soft start
-Close-open timing control
-Hydraulic pressure 150 bar
-Form heater with 300 liter water tank
...
Multi-functional CAM cutting system using pure-waterjet cutting technology - without abrasive (Water jet cutting system) for the 2D cutting of foam, plastic and other flat, flexible, non-metallic materials.
Cutting area in X and Y: 1600 mm x 1200 mm
inclusive HP-Pump (used)
• 1 cutting table
• 1 cutting bridge and 1 cutting head
• Cuts single or multiple layers
Strengths, added value:
• Suitable for flat sheets of material and rolled goods
• Short cutting times thanks to a high cutting speed o...
The machine would have to be overhauled in any case for commissioning. (Hose packages, mixing chamber, electronics).
Caasvt3yi9
We had mounted an adapter piece on the mixing chamber for filling 300ml cartridges (we still have about 50 of them).
The machine consists of 3 parts, comp.A+comp.B+control cabinet, which were mounted together on a steel frame 1,3x2,8m for better transport.
So it can be easily moved by forklift or crane ,without separating the components.
sold ex works; without warranty,...
Machine has a working width of 600 mm
output about 2 m per minute
Temperature up to 400 degrees
Jxypze
Works with thermal oil
Optional is available a flame laminating line, leather splitting line and slitter (The product "Syspur-derm" was produced on this line.
KraussMaffei ink metering system type: CD 0.6
==== 2PIECE AVAILABLE ====
Technical data
Metering cylinder:
Useful volume
- color: 0,6 l
permissible operating pressure 250 bar
component/hydraulic ratio 1:1
Grease pump:
Air operated piston pump type PPG 4
tank size 0,4 l
Proportional hydraulics for paint metering:
Drive power 1.5 kW
Tank volume 63 l
B8r9ifwimt
Delivery rate 3.6 l/min
Operating pressure 230 bar
Safety valve 230 bar
Electrical equipment:
Operating voltage 380 V, 50 Hz
Valve voltage ...
2K mixing and dosing plant / Klenbeanlage used
Manufacturer: IMT Spray-Systems GmbH
type: Optimix 2k-ND
year of construction 2008
control: Simatic OP Panel / Simatic S7
Discharge head with hose
Discharge hose heated
Material hopper heated / component A with stirrer
Connection for external refill stations available
Suitable refilling stations available for sale at extra charge
B79uqdxytz
Condition: used from production shutdown, cover plates missing, traces of use
New hydraulic PU sandwich panel production press with 2 mold carriages and PLC control. Special production very accurate
Technical specifications:
B7sqkgovn3
-Product dimensions: max. 1200x6000 mm
-Product thickness: max. 200 mm
- Stroke 380mm
-Closing force 280 tons, 3 kg / cm²
-8 pieces of hydraulic cylinders, stroke 380 mm
-300 lt hydraulic tank
-11 kW hydraulic drive
-Form car drives with soft start
-Close-open timing control
-Hydraulic pressure 150 bar
-Form heater with 300 liter water tank...
HENNECKE METERING MACHINE PUR TOPLINE HK 65 \ 65\MN, FOR TOP CLASS HIGH PRESSURE POLYURETHAN PROCESSING, FOR FOAMING OF POLYURETHANE RIGID FOAM SYSTEMS A: B RATIO from 1: 1
PRODUCED BY THE GERMAN COMPANY HENNECKE GMBH
250 L TANKS FOR RAW MATERIALS
We purchased the machine for PU production by Hennecke Polyurethane Technology in a dosage ratio of 1: 1
It is a high-class metering machine from the TOPLINE series. Metering machines of the TOPLINE series have always been
a synonym for top class...
With this complete line you can produce polyether blocks of:
Standard foam
Hyper soft foam
High Resilence HR foam
Viscoelastic foam
A broad range of foams can be produced in mould carriages with a density from 20-50 kg/m3.
The production line consists of:
a) Hennecke, BFM Compact
b) Mould carriages (4 pcs)
c) Suction hood with flat top device
d) Polyol BULK tank, about 30 ton
e) High Resilence HR foam press
f) Formulations for standard, HR, Viscoelastic and Hypersoft foam
g) List of supplier...
Dekumed Unidos 300 TXMP 2K-Dosiermischanlage, control Siemens Simatic PLC S7, year 2016, high pressure gear pumps for epoxy resin and hardener, 2 stainless steel tank 400 L for epoxy resin adhesive and hardener, heaters for both component container, Dosiermischkopf,. Compressor, cable reel 70 m, control cabinet, jib 4 m swivel, with plant built steel frame, heavy duty casters, drawbar
Nj3cz
Dekumed Unidos 300 TXMP tr. supply for mixing plant, built in 2016
Pumps for epoxy resin and hardener, pr...
Rotary table system RT14 meter
consisting of:
- Steel construction / rotary table platform
Vi0fbvm
- Drive unit
- Energy supply system
- Supply units with ring line
Round table diameter: 14 meters
Upper edge of the rotary table platform: approx. 450 mm
Set-down weight: max. 50,000 kg
Cover of the rotary table platform: chequer plate
Track rollers: Steel rollers
Painting/coating: according to customer requirements
New hydraulic PU sandwich panel production press with 2 mold carriages and PLC control. Special production very accurate
Technical specifications:
-Product dimensions: max. 1200x6000 mm
-Product thickness: max. 200 mm
- Stroke 380mm
-Closing force 280 tons, 3 kg / cm²
-8 pieces of hydraulic cylinders, stroke 380 mm
-300 lt hydraulic tank
-11 kW hydraulic drive
-Form car drives with soft start
-Close-open timing control
-Hydraulic pressure 150 bar
-Form heater with 300 liter water tank
- Mold car...
New hydraulic PU sandwich panel production press with 2 mold carriages and PLC control. Special production very accurate
Technical specifications:
-Product dimensions: max. 1200x4000 mm
-Product thickness: max. 200 mm
Fz22ej9
- Stroke 380mm
-Closing force 280 tons, 3 kg / cm²
-6 pieces of hydraulic cylinders, stroke 380 mm
-300 lt hydraulic tank
-11 kW hydraulic drive
-Form car drives with soft start
-Close-open timing control
-Hydraulic pressure 150 bar
-Form heater with 300 liter water tank
- ...
Contour cutting machine Fecken-Kirfel C52, horizontal CNC system for foams of all kinds, for various production areas, e.B mattresses, furniture, automotive, packaging, etc.
Machine after a full retrofit in November 2021, so, new control, new cabling, new servo motors. Mechanical parts replaced as far as necessary. Attention! Special version of machine working width 240cm.
Specifications:
- Working height 1300mm
- Working width 2400cmm
- Working length 2200mm
- turnable Table ( pneumatic )
- Ver...
Vertical CNC foam cutting machine for different types of foams, isolation materials, etc. Very good condition. Machine will be renewed and will have a new steering system based on Mach 3 free software, new servo motors, etc. The machine is then actually like new. We will answer your questions with pleasure if you are interested.
Eqbrtf2
Horizontal carousel foam cutting machine. Technical description:
Table diameter: 7,2m
Cutting height - 1,25m
C3n9w2df
Cutting width - 2,30m
Machine equipped with vacuum table, for easy cutting of light material. Thanks to the table and special blade guide, it is possible even to cut basotect foam from BASF. Machine produced on customers order Deivery time about 10 weeks. Installation costs to be discussed.
Horizontal foam splitting machine, foam cutting machine.
Machine based on SKF and Siemens parts. Control from Siemens,
Touch screen, PLC.
Machine equipped with a suction table, which allows cutting of a lot
lightweight materials. The specially developed knife guide and suction table
enable the cutting of BASF Basotect foam with a density of 8kg / m3.
Machine is produced to order. We have also machines in stock !!
Bssuk2fzlv
Installation costs are to be discussed. Machine with a 2 year guara...
Automatic vertical foam cutting machine with 2 side slides. State-of-the-art technology, including Siemens Simatic control, Siemens servo motors, Siemens touchscreen control panel mounted in a standing desk. Years warranty. Suitable for trimming foam blocks, cutting of sheet material and rectangular cuts from a wide variety of materials such as.B PU soft and rigid foam, PE, EPDM, nonwoven material, basotect®, rock and glass wool. DELIVERY TIME : ONLY 2 MONTHS FROM ORDER. Please contact us for p...
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.