Used Berlin for sale (2,436)

Condition: ready for operation (used), Year of construction: 2003, Outreach: 45m, max. lifting capacity: 6000kg, tip load capacity: 1200kg, hook height: 23m, hoisting speed: 5m/min, trolley speed: 25m/min, support dimensions X/Y: 4500mm/4700mm, counterweight: 16500kg, transport dimensions X/Y/Z: approx. 16500mm/2600mm/4000mm, weight: approx. 20000kg. Documentation available. An on-site inspection is possible. Nwjdjyxgrwjpfx Ah Rsd

Year of construction: 1996, condition: ready for operation (used), A knife surface grinding machine Reform without coolant, separation and filtration system is available. Grinding length: 1300mm, magnetic table dimensions X/Y/Z: 1350mm/150mm/1300mm, grinding spindle power: 5.5kW, table swivel: +/-90°, machine dimensions X/Y/Z: approx. 3000mm/1000mm/1500mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Njdpfx Aeyxgq Heh Rowd

Year of construction: 2011, condition: ready for operation (used), Clamping force: 700kN, Opening stroke: 305mm, Ejector stroke: 105mm, Ejector force: 20kN, Screw diameter: 30mm, Shot volume: 99cm³, Speed: 480rpm, Injection pressure: 1451bar, Weight: approx. 6200kg, Control system: CC200, Operating hours: 57077h. Documentation available. An on-site inspection is possible. Nsdpfx Aoyxgqgsh Rewd

Year of construction: 2002, condition: ready for operation (used), A double column cold mixing system Mixaco is available. Material: steel, usable volume: 800l, motor power: 30kW, mixing vessel: conical, mixing blades: dispersion blades, machine dimensions X/Y/Z: 2900mm/2850mm/3500mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. Nwedpfx Aeyxgqysh Rod

Condition: ready for operation (used), Power: 11 kW, tank capacity: 20 L, weight: approx. 95 kg. On-site inspection is available. Nedpoyxgr Djfx Ah Rswd

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Nsdoyxgr Rjpfx Ah Rjwd

Condition: ready for operation (used), Year of construction: 2015, A continuous glass capping machine VTB with gas flushing for twist-off lids is available. Glass volume: 225ml/380ml, capping capacity: 10-60lids/min, product material: stainless steel 1.4301, machine dimensions X/Y/Z: approx. 3000mm/1000mm/2300mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Expected to be available August 2026. Nwsdsyxgqmspfx Ah Rjd

Condition: ready for operation (used), Year of construction: 2022, Load capacity: 5000kg, mast type: triplex, lift height: 5000mm, free lift: 1355mm, fork dimensions X/Y/Z: 1220mm/150mm/55mm, machine dimensions X/Y/Z: approx. 4300mm/1550mm/2500mm, weight: approx. 8100kg, operating hours: 176h. Documentation available. An on-site inspection is possible. Nsdeyxgqtepfx Ah Rowd

Year of construction: 2020, condition: ready for operation (used), Load capacity: 16000kg, swivel angle: 90°, swivel time: approx. 50s, table dimensions X/Y: 1600mm/1600mm, table support height: 1100mm, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2800mm, weight: approx. 4400kg. An on-site inspection is possible. Nwjdeyxgrkspfx Ah Rod

Year of construction: 1990, condition: ready for operation (used), Table dimensions X/Y: 900mm/350mm, magnet dimensions X/Y: 600mm/350mm, max. workpiece height: 375mm, max. table load: 300kg. Machine dimensions X/Y/Z: 3200mm/2600mm/2400mm, weight: approx. 400kg. Documentation available. An on-site inspection is possible. Nsdpeyxgrqsfx Ah Rjwd

Condition: used, Year of construction: 2012, Working condition Accela series printer. Ask for additional information! Nwodpfsywi Rtsx Ah Rsd

Condition: used, Year of construction: 2012, Operational condition machines. Ask for specification and details. Nwedeywi Apjpfx Ah Red 2 units available!

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Nwsdpfxoyw Sv Se Ah Rod

Condition: ready for operation (used), Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement. Nsdpfxjyw Sv Es Ah Rewd

Condition: ready for operation (used), Year of construction: 2009, Three identical Certuss steam generators are available. Year of manufacture: 2008/2009/2010, steam output: 600kg/h, pressure vessel volume: 42.9l, set pressure: 10bar, test pressure: 57bar. Machine dimensions X/Y/Z: 1650mm/900mm/2000mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible. Nwjdpfxsyw Svrj Ah Rod

Year of construction: 2013, condition: ready for operation (used), A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible. Nsdpeyw Svlofx Ah Rewd

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Nedpfx Ahoyw Svfj Rewd

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible. Nwjdpjyw Swcsfx Ah Rjd

Year of construction: 2011, condition: ready for operation (used), One DEK stencil printer including two identical ASYS unloaders is available. 1) DAK Horizon 03ix stencil printer, year of manufacture: 2011, print dimensions X/Y: 510mm/508.5mm, min. PCB dimensions X/Y: 50mm/40.5mm, PCB thickness: 0.2mm-6mm, max. PCB weight: 1kg, print speed: 300mm/s, stencil frame size: 305mm-736mm, machine dimensions approx. 2100mm/1500mm/1600mm, weight: approx. 700kg. 2) 2x SMT magazine unloaders ASYS AMS 03D type 3.1, year of manufacture: 2019/2022. Including three timing belts 16T5-3835. Documentation available. An on-site inspection is possible. Nwedpoyw Su Uefx Ah Rod

Condition: ready for operation (used), Year of construction: 1997, A horizontal fire-tube/smoke-tube boiler Loos with a 2-pass system is available. Steam output: 2000kg/h, max. operating overpressure: 11.5bar, fuel: oil/gas. An on-site inspection is possible. Nedpfjyw Svxex Ah Rswd

Year of construction: 2003, condition: ready for operation (used), A CNC large-format machining center Axa including peripheral equipment is available. Travel X/Y/Z: 4000mm/900mm/950mm, working area X/Y: 4000mm/700mm, tool stations: 72, spindle speed: 10000rpm, control: Heidenhain iTNC 530, operating hours: 77956h, spindle hours: 29342h, power-on hours: 80109h. Including chip conveyor, internal cooling, chip spray gun, oil mist extraction, handwheel, probe and tool measurement Blum Laser. Documentation available. An on-site inspection is possible. Nwsdpfxsyb Scfe Ah Rsd

Year of construction: 1994, condition: ready for operation (used), Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible. Nodpfxsywy Rwe Ah Rewd

Year of construction: 2008, condition: ready for operation (used), A CNC 7-axis counter-spindle lathe DMG Mori is available. Turning diameter: 640mm, max. turning length: 1185mm, travel X1/X2: 550mm/180mm, travel Y: +/-90mm, travel Z1/Z2: 1185mm/1050mm, rapid traverse X/Y/Z: 40m/min/24m/min/70m/min, speed: 5000rpm, B-axis: +/-120°, machine dimensions X/Y/Z: approx. 7800mm/4000mm/3000mm, weight: approx. 15000kg, control: Heidenhain plusIT Pilot, machine hours: 51320h, spindle hours: 34158h. Documentation available. An on-site inspection is possible. Nsdpfx Aoywy R Dsh Rowd

Year of construction: 2006, condition: ready for operation (used), A CNC dual-head waterjet cutting system Bystronic is available. Working dimensions X/Y/Z: 4000mm/2250mm/230mm, cutting heads: 2, max. cutting carriage distance: 1150mm, simultaneous movement: 84m/min, machine tolerance: +/-0.1mm, repeatability: +/-0.05mm, max. frame load capacity: 7000kg, max. workpiece weight: 6300kg, max. round part diameter and length: 440mm/3700mm, max. operating pressure: 3800bar. Machine dimensions X/Y/Z: approx. 9000mm/7550mm/2050mm, weight: approx. 10000kg, operating hours: approx. 41130h, cutting hours head 1/head 2: 13720h/956h. The second head was removed and the cutting unit was mounted on head 1 as a spare part. However, after procurement of a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. Including a desalination system and all spare parts. Documentation available. An on-site inspection is possible. Nwedpfxsywy Rde Ah Rod

Year of construction: 2008, condition: ready for operation (used), Medium: HCFC/HFC 2, max. operating temperature: 32bar, min. temperature: -40°C, max. temperature: 120°C, coil volume: 11.6l, weight: approx. 65kg. Documentation available. An on-site inspection is possible. Nodpfx Ahjywy R Rj Rewd