Used Biesse Akron 855 for sale (263)

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 33720, Machine dimensions: L 7000 x W 1780 x H 1770 mm Bmbucrsmsik Panel height: 10/60 mm Panel height after rounding: 35-60 mm (depending on profiles) Thickness of veneer material in rolls: 0.4/3 mm Thickness of veneer material in strips: 0.4/15-22 mm Minimum panel length: 140 mm Minimum panel width (at 250 mm length): 50 mm Chain feeding speed: 10-14-20 m/min Connections to central extraction system: 10 x 200 mm Connections to central extraction system (for adhesive unit): 1 x 80 mm Connections to central extraction system (for pre-milling unit): 1 x 120 mm Pneumatic connection: 7 bar Operating voltage: 400/50 V/Hz (three-phase + neutral + ground) Installed power (rated): 22kW Control voltage: 24 V DC Static frequency inverter: 200 Hz Glue tank capacity (approximate): 3 Kg Warm-up time at 1/2 load (approximate): 10 min

Condition: used, Year of construction: 2012, Panel thickness max: 60 mm Vh7Gpjsiq Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Workpiece width min: 50 mm Electromotoric height adjustment: Yes Glue system granulate: glue pot below feeding chain Quick-change glue pot: Yes Magazine for single strips: Yes Premilling unit: No Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 4.710 mm Control: BIESSE HDI Software: CNI SINTRA Conformity marking: CE mark Total connection: 11 kW Weight: 1.850 kg

Condition: used, machine/vehicle number: 007365, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Bvuznytir8

Condition: reconditioned (used), Year of construction: 2010, Technical data: Year of manufacture: 2010 Software: Sintra LT, touch screen Dqv7Dt Maximum edge thickness: 3 mm Part length: 140-3200 mm Part thickness: 10–60 mm Feed speed: 12 m/min Machine length: Approximately 5574 mm Machine width: 866-1386 mm Height (to suction nozzle): 1572 mm Voltage and power: 400 V, total installed power 13 kW Air pressure: 7-10 bar Machine weight: Approximately 2230 kg Complete equipment of the units: spraying, pre-milling unit, application and pressure unit for EVA glue, roughing unit, trimming unit, double-motor rounding unit, radius and glue scrapers, grooving unit 0-90°, polishing discs

Condition: good (used), Year of construction: 2012, Biesse 435 edge banding machine Pre-milling Glue hopper, pellets Pre-cutting with guillotine Pre-cutting with saws Top-to-bottom milling and cornering unit Profile cycline Flat cycline polisher Feed rate 12m/min Dqopqf Max height 60mm Veneer in a roll max 3mm Machine used, efficient, still performs well

Condition: excellent (used), Technical parameters: max. thickness of edgebanding 8 mm max. thickness of edge banding in roll 3 mm Ehqmtkmuq feed rate 12-18 m/min max. height of edge banding 60 mm min. board length 140 mm min. board width 50 mm edge banding storage spraying devices initial milling application of glue edging on saws on both sides with adjustable angles milling of the edge banding up and down earning the corner( on both sides, front or rear finishing arches, semicircles) straight cyclone radial cyclone polishers quick-change aggregate electric height adjustment total power of connection 13 kW machine length 4200 mm transport dimentions ( l./w./high) 510x110x165 weight 1980 kg

Year of construction: 2009, Condition: excellent (used), I sell the edge banding machine BIESSE Akron 425 A-R Year 2009 Configuration: Edge height 8 - 65 mm Edge thickness 0,4 - 8 (12) mm Edge banding, End cutting saws pneumatic adjustable Ch0Kutvjfs Tilting milling Radius scrapers R2 Polishing brushes Hot-air blower TOP condition, possible to test !

Condition: used, SMART TOUCH 23" Numerical Control with Sintra Software + SOPHIA IoT Software (also available in App version) Windows Operating System Panel height mm from 10 mm to 60 mm Solid 12mm PVC/Abs mm 0.4 - 3 Multi-Speed Kit 12-18 m/min Working height adjustable electronically by C.N. Side roller conveyor with idle wheels for panel support Bench with air curtain system positioned at the machine entrance for inserting 500x2000 mm panels High quality and productivity kit with superior pressure rubber belt and automatic lubrication system Reel holder plate Anti-adhesive group "ADZ02" RT02 rectifier group with 2 adjustable motors (1.8 kW each) at 12000 RPM AdiRL - 700 Panel Edge Heating Lamps VC-511 gluing unit suitable for the use of both granulated EVA glue and granulated PUR glue with loading from above B9Uas9Rt (additional hybrid glue pot) Automatic border introduction Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N "IN-801" end-cutting unit with 2 motors (0.65 kW each) "RF02" trimming group with 2 tilting motors (0.65 kW each) Rounding unit "AR02 E" with 2 multifunction motors (cornering tool + rounding tool) with adjustment from the control numeric in automatic AR02 "RB02" edge scraper group electronically adjustable by C.N. Glue scraper group "RC02" Brush group "SZ02" Phon Group "PH-501" for reviving the edge color Cleaning group "LPT02" Non-stick Group TECHNICAL DETAILS TO BE CHECKED

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Czxfneauo8 Corner Rounding Unit: yes Max feed speed: 18 m/min Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2013, We offer for sale a refurbished AKRON 440 banding machine from the Italian manufacturer Biesse S.p.A. It is a machine in complete equipment, pre-milling unit, roughing, rounding, etc. The machine is in perfect condition and immediately available for collection Fzjbmgk

Year of construction: 2012, Condition: like new (used), I sell the edge banding machine Biesse Akron 1320 Year 2012. Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding manual adjustable Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Radius scrapers servomotoric adjustable Glue scrapers pneumatic adjustable Polishing brushes Rquav Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-3,0 mm Feeding speed 12 m/min. Total weight 1200kg Total length 4,10m only ! CE Mark. Including full documentation. Very good condition ! Available immediately !

Condition: used, Numerical Control with Sintra Software Panel height 60 mm Solid mm 12 Pvc / Abs mm 0,4 - 3 Multi-Speed Kit 12, 18 mt / min Working height electronically adjustable by C.N. Adjustable inlet guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with 2 adjustable motors Reel holder plate Lamp unit to pre-heat the panel Gluing unit for EVA hot melt glue with pre-melter Edge pressure group on straight profiles with NC adjustable pressure rollers End trimming unit with 2 motors with automatic inclination adjustment Vvnuny Trimming unit with 2 superimposed motors Gluing unit with 2 tilting motors electronically adjustable by C.N. Rounding unit with 2 multifunction motors (gleaner + rounder) with numerical control adjustment in automatic Edge scraper group Glue scraper group Oscillating brush group Phon unit for brightening the edge color

Condition: used, machine/vehicle number: 006721, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Corner Rounding Unit: yes R9Eyjswj9T Max feed speed: 12 m/min

Year of construction: 2017, Condition: like new (used), I sell the edge banding machine Biesse Akron 1330A Year 2017. Configuration: Entry fence manual adjustable Premilling manual adjustable Cki8A0Iyjz Edge banding manual adjustable / 2 glue tanks for EVA and PUR glue / vacuum storing tank for PUR glue tank Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling servomotoric adjustable Corner rounding unit 2-motor servomotoric adjustable Radius scrapers servomotoric adjustable Glue scrapers pneumatic adjustable Polishing brushes with spraying Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment servomotoric PUR glue possible 2nd set of premilling heads included in price Material height 10-60 mm Edge thickness 0,4-5,0 mm Feeding speed 12 m/min. Only 162.000 meters edgebanded. CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: used, machine/vehicle number: 006529, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes C92Knhy Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 10 mm

Condition: used, machine/vehicle number: 007699, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Cmjmshh8Yi Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007730, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Dqpbup Corner Rounding Unit: yes Max feed speed: 18 m/min

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Dqo7G7 Operating Units: 9 nr

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B Dqo7Gt Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B

Condition: used, Year of construction: 2006, No. 3195 CNC machining center BIESSE Rover C 6.50 CONF.2 Used, year of construction 2006 Machine already disassembled According to our customer, the machine is fully functional Various workpieces can be processed simultaneously on the machine Working area X 4850/4600 mm Working area Y 1535 mm Power output 228 kW, 39 A Required floor space approx. 8100 x 6500 mm LB Total weight approx. 6800 kg Sale on behalf of customer, ex location Poland, without dismantling, without transportation and assembly Errors in description and price excepted Dismantling, loading and transportation by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Dqxu8Z Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2011, Working dimension X: 4.200 mm Working dimension Y: 1.535 mm Working dimension Z: 230 mm Independent Z-axes: 2 Number of milling spindles: 2 BIESSE Peak Power Spindel: Yes Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 66 RFID-based tool management: Yes BIESSE Flexstore: Yes Vertical drilling spindles: 5 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 BIESSE Multifunction units: Yes BIESSE Drilling aggregate BH 9: Yes Groove saw: with own C-axis BIESSE Multifunction units: Yes Cantilever machine: Yes Machine table: Pod and rail table Workpiece support aids: Yes Three stop ranges: Yes Electronic end position detection: Yes Dqygqb Number of consoles: 10 Positioning aid: Yes Line laser: Yes Self-adjusting machine table: Yes BIESSE Automatic machine table EPS: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Special workpiece clamping system: For windows BIESSE Uniclamp: Yes Feeding: belt conveyor, automatic Outfeed: belt conveyor Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: BIESSE XP 600 Software: DIREKT CNC NC-HOPS 5.0, DIREKT CNC WORK CENTER MULTI Conformity marking: CE mark

Condition: used, machine/vehicle number: 005063, Max. panel width: 1300 mm Max. panel length: 3200 mm Bokpvzam2Tw Length of conveyor: 12300 mm Panel return for edgebander: Left

Condition: used, machine/vehicle number: 005973, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Ce7Galo8Yh Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: used, machine/vehicle number: 006163, Max. panel width: 3200 mm Mninlk29 No of Bottom Units: 3 No of injectors: 6

Condition: used, machine/vehicle number: 005064, Position 1: Single Edgebanders BIESSE-STREAM B1 7.0 Position 2: Panel Return Systems BIESSE-STREAM B1 7.0 Cy8Jphbskw