Used Biesse Akron 855 for sale (326)

Condition: used, Year of construction: 2022, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 - 60 Solid 22 mm PVC/ABS mm 3 Feed speed up to 25 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Panel support guide motorized and electronically adjustable by C.N. Air curtain table for panel introduction Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N. AdIRL-700 Panel Edge Heating Lamps Single position reel holder plate Gluing unit for EVA hot melt glue with glue pot and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N End trimming unit with 2 IT 70 P motors Overlapping trimming group with 2 motors Staggered edge trimming unit with 2 motors electronically adjustable by C.N. Anti-stick group Rounding unit with 2 multifunction motors (cornering tool + rounding tool) Non-stick liquid application system Electronic edge scraper group electronically adjustable by NC Glue scraper group 0-90° tilting tupie group Brush group 3800 kg Total installed power KW 27 TECHNICAL DETAILS TO BE CHECKED Iiedpfx Asw Eawtoabeh

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW Iijdpfx Ajh Txlcoabsh XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Iiodpelc Dwnefx Aabjh Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 From location

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, STREAM SB LINE (WINNER W1 + STREAM C SB1/SB2 + SP30 + TURNER) Year of production: 2021 Technical condition: very good Panels: chipboard, MDF, HDF, plywood, joinery, solid wood Coatings: ABS / PVC / laminate / veneer / lacquer / melamine Shape: rectangular, without grooves or holes Roughness: average < 5 µm, maximum < 35 µm Working temperature of components: < 50 °C Minimum density: chipboard > 650 kg/m³, MDF > 750 kg/m³ FEEDER / STACKER WINNER W1 Panel length: min. 300 mm Panel width: min. 240 mm (double row: min. 120+120 mm), max. 1200 mm (double row: max. 600+600 mm) Panel thickness: 10–60 mm Panel weight: up to 100 kg Panel flatness: ±1 mm/m (max. ±2 mm over the entire length) Height of uniform stack on the conveyor (H=250 mm): min. 300 mm, max. 1500 mm High-speed unit speeds: Y-axis (carriage) 210 m/min, Z-axis (suction frame) 130 m/min (+ productivity ~2 cycles/min) Base productivity: 15 cycles/min (depending on composition/weight/gaps) Compressed air consumption: 950 Nl/min Installed power: 16 kW Option: powered panel separator – air 1050 Nl/min, power 8 kW DOUBLE-SIDED EDGE BANDING MACHINES STREAM C SB1 (first pass) Panel overhang beyond the conveyor: 35 mm Panel thickness: 10–60 mm Edge thickness: 0.3–3 mm Isdew R Savopfx Aabeih Edge height: 15–65 mm Table height: 950 mm Panel width: 240–1200 mm (SB1 TWIN: min 100 mm; SB1 SOFT: min 270 mm) SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional equipment) STREAM C SB2 (second pass) Panel overhang beyond the conveyor (fixed): 35 mm (SB2 SOFT: 50 mm) Panel thickness: 10–60 mm Edge thickness: 0.3–3 mm Edge height: 15–65 mm Table height: 950 mm Clamp spacing: 500 mm Panel width: 240–1200 mm (SB2 SOFT: min 270 mm) Panel length: 240–2700 mm SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional tables) GLUING UNIT SP30 Edge thickness: 0.3–3 mm Maximum cutting section of scissors: 135 mm² (3 × 45) Panel thickness: 10–60 mm Edge height: 15–65 mm Minimum edge length: 250 mm Glue tank: 1.3 kg Glue reservoir: 11 kg Application capacity: 16 kg/h Edge roll diameter: 800 mm EDGE CUTTING LENGTH CONTROL (options) EC40: minimum length 200 mm, speed 40 m/min, tolerance ±3 mm EC60: minimum length 200 mm, speed 60 m/min, tolerance ±5 mm TURNER ROTARY UNITS PT1 / PT2 Panel length: 300–3200 mm Panel width: 200–1200 mm Panel thickness: 10–80 mm Maximum panel weight: 100 kg Panel flatness tolerance: 1 mm/m Floor flatness tolerance (area 8000 × 3000 mm): ±10 mm Compressed air requirement: 250 L/min Installed power: 7 kW Installation and commissioning are available for an additional fee.

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Iiedpow Rpd Sofx Aabjh Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: excellent (used), Year of construction: 2019, On behalf of our VIP client, we offer for sale an almost new Stream MDS machine from 2019. The machine is in excellent condition and has been serviced by us, so we know its full history. Technical information is available upon request. Iijdswyxkujpfx Aabjh

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Ijdpfsw D Dhasx Aaboih

Condition: like new (used), Year of construction: 2008, I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Working area 3730x2200mm Configuration: Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Condition like new ! Fully working. Iiodpofwvppjfx Aaboh Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: used, Year of construction: 2015, operating hours: 19,200 h, functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 40 mm, Equipment: ABS, Here we have a in line Biesse edgbander or as we call it a Lefty/Righty the machine can run panels Iedpfjxb Dk Hjx Aaboih Min 200 x 150 to max panel 2500 x 2500 Thickness min 8mm to max 40mm The first machine comes with Pre milling , Gluing unit fed from PUR Nordson pump, Snip saw, Rough Milling, Profile milling ,Profile scrapping ,Flat Scrapping ,Buffing wheels and Grooving saw all of which are NC controlled apart from the Buffing wheels. The second machine also has Pre milling , Gluing unit fed from PUR Nordson pump, Snip saw, Rough Milling, Profile milling ,Profile scrapping ,Flat Scrapping ,Buffing wheels all of which are NC controlled apart from the Buffing wheels. On the line you have in feed rollers that pass the panels onto the fosters these fosters help square the panels up we have one Infront of the first machine and one Infront of the second machine. The price we are looking at is 45-50k

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements depth 5213 mm Machine weight 3600 kg Main Drive Spindle motor power 8 kW Number of axis 4 Additional Equipment Pre-milling Unit: Yes Glue Application Unit: Yes Ijdpfx Aaew N Tl Rebsih End Trimmers: Yes Top/Bottom Trimmers: Yes Corner Rounding Unit: Yes Scraping Unit: Yes Glue Scraping Unit: Yes Glue Buffing Unit: Yes This 4-axis BIESSE Jade 240 was manufactured in 2021, featuring a single-sided automatic edgebander design. It offers a feed speed of 12 m/min and can handle panel thicknesses from 10 to 60 mm and edge thicknesses up to 8 mm. Equipped with comprehensive units including pre-milling, glue application, and end trimmers, plus a touch screen control for enhanced usability. Consider the opportunity to buy this BIESSE Jade 240 edgebander. Contact us for more information. Application Types Edge Banding

Condition: used, machine/vehicle number: 007358, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 9 nr Iedpewlpl Tsfx Aaboih

Condition: good (used), Year of construction: 2008, Biesse STREAN B1/8.0 Single-Sided Edgebander, Year 2008 Isdpsxala Tsfx Aabeih - Code 0000015: Y-axis CNC with infeed guide - Code 0000011: Right-angle panel inserter - Code 0000517: Automatic lubrication C1 - Code 0000017: Parallelogram workpiece support 5.5–8.5 - Code 0000439: B1 installation kit with panel return device - Code 0000136: Liquid jet application unit - Code 0000669: RT20 pre-milling unit, 2×3.5 kW, 9000 rpm - Code 0000336: Additional pair of diamond cutters, H=60 - Code 0000469: SP20 glue spreading unit - Edge thickness: 0.3–3 mm - Bswyjukh Tqjhhpkswt (term seems corrupted, clarification needed) - Wood thickness: 20 mm - Panel thickness: 10–60 mm - Code 0000244: Y-axis CNC for pressure zone - Code 0000682: Two-position edge magazine for SP10 and SP20 - Code 0000144: Additional glue pot - Code 0000367: IT90-S end trimming unit, 2×0.3 kW, 12000 rpm - Code 0000704: Solid wood edge kit up to 20 mm thickness for IT90 - Code 0000711: 3-position pneumatic kit for IT90 - Code 0000151: RS10 flush trimming/pre-milling unit – straight tool, L=20, 2×1.3 kW, 12000 rpm - Code 0000901: Increased straight tool (L+30, solid wood) for RS10 - Code 00000152: 2.4 kW motors for RS10 flush trimming unit – straight tool L=30 - Code 00000536: Automatic 2-position adjustment for RS10 - Code 00000158: RF=40 angle trimming unit, 25° bevel, R=1.5/2/3 mm, 2×0.65 kW, 12000 rpm - Code 0000651: Copying shoes for RF10-RF30-RF40 groups - Code 0000579: AR30 multifunction corner rounding unit, R=2 mm - FAST system with 2 pre-selection positions via control panel - 2×0.35 kW, 12000 rpm - Code 0001017: 4-position pneumatic system for AR30 - Code 0000165: RB10 edge scraper group, R=2 mm - Code 0000652: Copying shoes for RB10-RB30-RB40 groups - Code 0001004: RC20 glue scraper group - Code 0000171: SZ30 superimposed oscillating brush group, 2×0.18 kW, 1400 rpm - Code 0000989: Liquid jet application kit for SZ30, SZ60 - PH10 edge band pre-heater WITHOUT PANEL RETURN

Condition: used, Year of construction: 2009, Numerical Control Sintra Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Panel introduction table to facilitate the alignment of the input panel Side roller conveyor with idle wheels for panel support Grinding group Coil holder magazine with 2 positions with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Predisposition for gluing unit for PUR glue Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Refilling unit with 2 superimposed motors Gleaning unit with 2 tilting motors Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Non-stick group Adjustable edge scraper group Glue scraping unit Iijdjh Uhxnjpfx Aaboh Oscillating brush group

Year of construction: 2001, condition: excellent (used), I sell the Biesse line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Isdpfxjd Iv H Re Aabjih Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) - Goose-neck type - Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) - Numerical Control with Software Biesse Works - Safety cabin (enclosure) of the working head - Front emergency carpets - No. 1 In-feeding table (with motorized belts) SX Iededh Tf Uepfx Aabjih - No. 2 Workpieces fixing clamps (for the panels introduction in the working area) - No. 1 Out-feeding table (with motorized belts) DX - Max. useful working area (X - Y - Z) mm 3000 x 1000 x 60 - Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (for longer panels than mm 2000, minimum thickness is mm 13) - Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1000 x 60 - Total installed power Kw 20 BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school) Iedpfeukcy Esx Aabeih

Condition: used, XNC Numerical Control Working range on X axis mm 3400 Working range on Y axis mm 1300 Working stroke in Z axis mm 155 N ° 2 work fields Bar worktop No. 8 manually adjustable bars for suction cup support with display for viewing working heights No. 8 pneumatic bakelite bars for lifting the panel No. 3 manually adjustable suction cups for each bar with vacuum seal for fixing the panel during assembly processing No. 1 vertical electrospindle with C-axis Vector, with automatic tool change, Iso 30 type cones, flange for use aggregates Automatic tool change system with 3 positions for aggregates positioned on the side Automatic tool change system with 20 positions and chain Drilling head with mandrels arranged as follows: - No. 10 verticals on X axis - No. 12 verticals in Y axis - N° 6 horizontal on X axis - No. 2 horizontals on Y axis Front protection and safety system with carpets Perimeter protection grids Motorized carpet for chip evacuation Vacuum pump Iedpfx Aaov Edggsbjih

Condition: used, Numerical Control NC 1000 Software Biesse Works Working field in X axis 3685 mm Working field in Y axis 1290 mm Working stroke in Z axis 200 mm - piece passage 70 mm FT nesting full plane worktable Automatic loading system with side lifting table N ° 1 vertical electrospindle, with automatic tool change, Automatic tool change system with 18 positions - positioned on the rear of the machine Boring head with independent spindles arranged as follows: - N ° 7 vertical in X axis - N ° 7 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE Ijdpfswufv Tjx Aaboih

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Iedpfepp Thnox Aabsih Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle Iijdpfxsugpwno Aaboh No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 75 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 7.5 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher wagon with 10 clamps Blade carriage speed 1-120 m/min Pusher speed 60 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Isdpfev Amx Tox Aabeih

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software Working range in X axis 3600 mm Working range in Y axis 1800 mm N ° 2 work fields Nesting worktable Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel detachment system with suction cups N° 1 3-axis vertical electrospindle, 13.2 kW, with automatic tool change, ISO 30 cone type Automatic tool change system with 16 positions - positioned on the back of the machine Automatic tool change system with 8 positions - on the machine BH 10 drilling head with 10 spindles arranged as follows: - N° 15 verticals on the X axis - N° 17 verticals on the Y axis Automatic unloading system with motorized belt Worktop cleaning system Iijdpfx Aajqvt D Rsboh Protection and safety system with perimeter grilles Security system with Bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control 250 m3/h vacuum pumps

Condition: used, Numerical Control with BSolid Software - BSuite3 Working range in X axis mm 2500 Working range in Y axis mm 900 Working range in Z axis mm 60 With automatic unloading device N° 1 vertical electrospindle 3 axes, with automatic tool change, cones type Iso 30 Tool changer with 8 positions Drilling head with N° 17 spindles arranged as follows: - N° 6 vertical in X axis - N° 5 vertical in Y axis - N° 4 horizontal in X axis - N° 2 horizontal in Y axis Integrated blade for making grooves Front protection and safety system with mats Perimeter protection grids TECHNICAL DETAILS TO BE VERIFIED Iijdpfjw Db H Hox Aabsh

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Ijdpfow D E A Esx Aabsih

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Iodewgc D Eepfx Aabjih