Used Blister Packaging Machine for sale (89,205)

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. The tensioning mechanism is electrically triggered. Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Gjdpsukxwmjfx Ah Dokf Good condition

Condition: like new (used), Year of construction: 2021, operating hours: 22,000 h, functionality: fully functional, total length: 4,670 mm, total height: 1,690 mm, total width: 1,370 mm, input voltage: 400 V, overall weight: 1,400 kg, compressed air connection: 6 bar, air demand: 0.2 m³/h, - Installed on April, 2021 - End of use on November, 2023 (Approximately 2 years and 7 months use) - Store from December, 2023 with vinyl wrapping Ilapak's Delta 3000 horizontal flow wrap packaging machine is PC controlled and equipped with long dwell technology for modified atmosphere packaging (MAP) and Ilapak's unique high-speed hermetic sealing technologies to cover the widest range of applications. Its heavy duty and reliable design allows the Delta 3000 to be integrated in automatic packaging systems. All Delta 3000 horizontal flow wrap machines are also available in stainless steel and bottom film feeding versions. One of the most effective ways to extend the shelf life of fresh products is to pack them in a hermetically sealed pack with a modified atmosphere (MAP – Modified Atmosphere Packaging). Our robust Delta flow wrap machines are precisely engineered to ensure hermetic sealing at high speed. Thanks to the flexibility of its design, the Delta series of packaging machines are also ideally suited for non-food applications where a hermetically sealed pack is required, such as medical and personal care products like wet wipes. * Main Feature - Upgradable machine configuration - Long dwell sealing jaws technology - Separated electrical control - Electronic machine with commercial available components * Benefits - Possibility to expand & connect the machine with different feeding systems - To perform hermetic sealing and MAP applications while managing a wide range of wrapping material characteristics - Easy accessibility during maintenance operation - Higher reliability components - Easy maintenance * Technical Data - Capacity: 25 - 100spm based on 4 ~ 1 line stack - Modified Atmosphere: N₂/CO₂ Mixer including O2 analyzer - Dimension: 4,666mm(L) X 1,367mm(W) X 1,689mm(H) including infeed line - Power Supply Spec.: 3P, 400V, 50Hz, 7kVA - Air Supply Spec.: 6 bar, 0.2m³/h - Machine Speed: Up to 100 cycles per minute Production output depends on film sealability and product characteristics - Film Cut-off: Min 100mm - 4.0” / Max 1200mm - 47” Depending on film and product characteristics Gkedpfx Aet Dg Iteh Dof - Film Reel Max Weight: Depending on film reel width, up to 75 kg - 165 lbs - Electronic Platform: Industrial PC

Year of construction: 2004, condition: good (used), Rotary 2-head automatic packaging machine for filling and sealing Gkjdpfx Ashpt Nxoh Dof pátes and meat stuffing into aluminium cups intended to sterilisation.

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Gsdpfsxn Aamjx Ah Dokf

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 21A10, total length: 3,120 mm, total width: 700 mm, total height: 1,930 mm, overall weight: 600 kg, input voltage: 380 V, type of input current: three-phase, power: 5.5 kW (7.48 HP), Flowpack packaging machine for packaging with PPL reels, equipped with a die for euroslot hole on the sealing and cutting unit. Gksdpfxexmkpgj Ah Def

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Gjdpjt Evzrofx Ah Dekf Model - PK8. Serial number - 1095. Date of manufacture - 1996. Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, total length: 4,500 mm, total height: 1,950 mm, total width: 1,800 mm, input voltage: 380 V, compressed air connection: 6 bar, control cabinet length: 600 mm, control cabinet width: 300 mm, control cabinet height: 900 mm, product height (max.): 410 mm, product height (min.): 100 mm, product length (min.): 1,200 mm, Machine was traded to us as new machine. Unknown origin or brand. We shipped it to our company. We then cleaned it, checked the wiring and inside and tested the machine to make sure everything works. English manual included. Video available to see it working. Machine including 2 meter long motorized infeed and outfeed conveyors. Gsdpeuzv S Defx Ah Dokf

Condition: good (used), For sale: Gkjdpfx Ahoutbaie Dsf Ibonhart horizontal packaging machine with clip machine from kwicklock. With infeed and outfeed conveyor. Brand of packaging machine: Ibonhart model: APH 5 There is a new Siemens control built in 2016 the entire control box was also renewed. The line is complete. We can carefully dismantle it and prepare and load it for transport. Transport in consultation It is possible to view the line here on location. it is also possible to see multiple Ibon Harts working here. If you have any questions, we would be happy to hear from you! Kind regards, Leo Holland For sale: Ibonhart horizontal packer / packaging machine with clip machine from kwicklock. With infeed and outfeed conveyor. Packing machine brand: Ibonhart model: APH 5 There is a new Siemens control built in 2016 The entire control box was also renewed. The line is complete. We can disassemble it with care and prepare and load it for transport. Transport under consultation It is possible to view the line here on location. it is also possible to see several Ibon Harts working here. If you have any questions, we'd love to hear from you! Kind regards, Leo Holland

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: S/N84869, This Smipack XP 650 ARX was newly assembled in 2023 and is currently in use for wrapping 24-packs of soft drinks in Fatcans, Slimcans, and Sleekcans. The machine is well-maintained, and ready for immediate operation. Gkedpfx Aexqfxqeh Dof The XP-series from Smipack is known for its reliability, speed, and user-friendly operation. This model includes an automatic infeed, L-sealer, and integrated shrink tunnel, suitable for film-only or tray-supported packaging.

Year of construction: 2014, condition: new, functionality: fully functional, 2014 MODEL THEEGARTEN-PACTEC BRAND, U1-D-CW TYPE GUM CRUSHING, FOLDING PACKAGING MACHINE. Gkedpounkw Tjfx Ah Dsf With panel and other auxiliary units. There are 2 labels on the machine. It is configured for 30.6x12.1x3.9mm single size and the maximum output speed is 2000ad/min; The machine is brand new, not operated and disassembled.

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Gsdpsxm Sa Hefx Ah Dskf Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Year of construction: 2025, condition: new, functionality: fully functional, VFFS Incline Packaging Line for Vegetables, Frozen Products, and Non-Standard Size Items. Gsdpfx Ahorqfmlo Djkf Conveyor scales designed for weighing individual pieces of irregularly shaped products. Once the operator sets the desired product quantity via the control screen, the required number of products is manually loaded onto the scale. The machine then selects the optimal weight from the 12 integrated scales and automatically transfers the weighed product onto the conveyor, which delivers the finished batch to either the packaging machine or to a container of your choice. This dispenser functions either as a fully independent standalone unit or as part of an integrated packaging system. The equipment is designed for easy disassembly, ensuring convenient and efficient cleaning with minimal downtime. Typical applications include packaging: • Larger irregularly shaped products such as frozen fish, meat, vegetables, etc. • Suitable for dispensing non-food items that do not conform to standard shapes. The system may be offered as a complete line or as individual units, with all modules capable of autonomous standalone operation.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 3,100 mm, total width: 7,400 mm, total length: 11,000 mm, overall weight: 13,000 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,700 mm, Equipment: documentation/manual, BOXmaker ULTRA - PVF CAPACITY: up to 1600 boxes per hour PULLER SPEED: up to 3m/s MACHINE DIMENSIONS: 7400mm x 11000mm x 3100mm INSTALLED POWER: 16.5 kW CARDBOARD TYPE: single, double, and triple wall up to 14mm and 1400GSM MAXIMUM BOARD SIZE: 2400mm x 3000mm, stack height 1100mm MINIMUM BOARD SIZE: 800mm width x 1000mm length WIDTH OF SLOT: 8mm PVF (platform vacuum feeder) - 3m or 6m Modular – can be added to BOXmaker ULTRA at later date Vacuum fingers - ejectors, mini vacuum producers Platform capacity 1400kg of active load Slight correction of position of the cardboard sheet PVS (platform vacuum stacker) - 3m or 6m optional module, can be added in later date. Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels (longitudinal creasing) x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Slotting Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Circular blades (longitudinal cutting) x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Printing unit x 1 - The printing unit is capable of outputting single color prints of up to 1000mm of width and 870mm in length, making it the perfect choice for standard transportation box markings. The imprint can be placed anywhere on the box, including creased areas - positioned automatically. Gluing unit x 1 Gkedped Rzqaofx Ah Def - The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models. FREE MODE - make custom boxes. 3000 box memory. 12 month warranty, provided training and support for services and parts.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll Gjdjvubapjpfx Ah Djkf For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 5050-152-400, type of input current: three-phase, total width: 1,400 mm, total length: 1,900 mm, total height: 2,400 mm, overall weight: 3,300 kg, input voltage: 400 V, Equipment: CE marking, documentation/manual, scorer, type plate available, Machine for the production and packaging of textile wet wipes into plastic-aluminium foil. Pouch material – printed foil PET12/AL10/PE100 Wipe material – nonwoven textile: 70% viscose; 30% polyester Gkjdpfxjxc Nb Tj Ah Dsf Filling liquid – as required, in a volume of 10–20 ml

Year of construction: 2014, condition: like new (used), functionality: fully functional, 1 PCS 2014 MODEL TENCHI BRAND TP-200 Outer Packaging Folding Machine Covers boxed packs of chewing gum with packaging. 60-1200 pcs/min. capacity. Packaging dimensions up to 110x50x20mm. With conveyors, 10kVA transformer and other auxiliary units. Gsdpfxouz Ur As Ah Dokf As an extra; 1 PCS 2014 MODEL TENCHI BRAND TV-100 Gum Crushing Machine : It cuts the chewing gum layer and brings it to 50x15x2,5 mm. It has a capacity of 15-17 sheets/min. Sheet dimensions are 50x475x2,5mm. Conveyor and other auxiliary units, 1 PCS 2014 MODEL TENCHI BRAND TO-350 Folding Packaging Machine : Folds and wraps cut single gum and gum paper. 400-450 packs/min. capacity. Conveyor, 7,5kVA transformer and other auxiliary units, 1 PCS 2014 MODEL TENCHI BRAND TC-320 Cartoning Machine : It has a maximum capacity of 100 cartons/minute. THERE ARE 2 LINES FOR SALE AND SEPARATE PRICES WILL BE CHARGED SEPARATELY.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 8,060 mm, total height: 1,963 mm, total width: 3,191 mm, overall weight: 3,000 kg, power: 12 kW (16.32 HP), . MF-620S is a high-speed fully automatic gluing and positioning line. It is suitable for mass production of various box types, such as hand Machine boxes, jewelry boxes, cosmetic boxes, watch boxes, etc. The scope of making boxes is wider and can better meet the needs of the modern packaging market. The appearance of the whole machine has been completely redesigned, making it safer and more beautiful. Gkedswb Sgrspfx Ah Dsf

Condition: new, Case erectors  Igluetech/Brunel Engineering Services RSE Gkjdpfx Ahevu Srie Djf 5 pieces Price per piece

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 17,000 mm, total width: 34,000 mm, total length: 23,000 mm, overall weight: 2,600 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, High quality, state of the art electronics, including servo motors, 15'' control unit. BOXmaker PRO 2400S - automatic setup (set-up time up to 30 seconds) CAPACITY: up to 1200 boxes per hour (FEFCO 200) MACHINE DIMMENSIONS: 3400mm x 2300mm x 1700mm CARDBOARD TYPE: single, double, and triple wall up to 10mm and 1000GSM MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 200mm width x 800mm length Servo puller: 2m/s Slotting knives x2 Servo powered slotting subassembly (30% faster cycle) Creasing wheels with integrated Scalpels (longitudinal creasing and cutting off glue flaps) x2 Godpsd Sap Tefx Ah Dskf Circular knives (removing excess cardboard longitudinally - window cut out) x2 Hand Holder Tool (making holes, die cut) Crosscutting Tool Flexo printing module - one color, 300 x 470mm (optional) Gluing module - cold glue system (optional)

Year of construction: 2011, condition: ready for operation (used), Simionato packaging machine. Gjdpfx Aoxcf U Ash Dokf Located locally in Hungary (EU), Vacegres.

Condition: new, Year of construction: 2025, functionality: fully functional, This packaging system is used to pack food and non food products in different forms: powder, granular, solid irregular shapes and liquids. Machine is composed by a feeding elevator that gently lifts the products, elevator can be with plastic cups in Z shape or with PU or PVC belt having stainless steel structure or can be used an auger elevator for granular or dusty products. The product is fed to a multi head weighter having 10 , 14, 28 weighting modules. The weighter stands on a special design stainless steel platform to reduce the vibration. The packing machine is able to work with different thickness film, different film width and different materials (PE/PE/BOPP/Paper/Aluminum/Nylon) and produces the following bags: pillow, pillow with gusset, block back, quad seal bag and with eurohole option. The movement is performed by servo motors and all the controls parameters are adjusted by touch screen, all the electrical components are from brand name manufacturers like Omron and Siemens. Productivity from 25-80 bags/minute depending on the weight and volume. This packaging system can be upgraded with the product exit conveyer, labeling machine to place label on the bags, vibratory feeder for soft products, date and lot printer, gas injection, free flow metal detector for food products, rotary table to accumulate the bags. Gjdpfxsvld N Uo Ah Djkf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, overall weight: 500 kg, input voltage: 400 V, input current: 4 A, Machine type LW-CM1 Performance from the Italian manufacturer Ramac. It is used for packaging a wide range of products such as nails, screws, nuts, bolts, washers, as well as metal or plastic components, which are weighed or counted by the integrated weighing/counting system. The LW-CM1 Performance weighing/counting system delivers high versatility, precision, and speed thanks to the combination of independent linear vibratory feeders for the coarse dosing phase, along with a counting module for the fine dosing phase. It is integrated with a system for feeding cartons for filling with the weighed items, as well as receiving filled cartons afterwards. By entering 'Ramac LW-CM1' in the search bar on the manufacturer’s website, you can find a video showing the exact operation of this device. The operator panel supports English, Italian, and Polish languages. Complete technical documentation from the manufacturer is included. The machine is in excellent condition, with very low usage due to a change in packaging concept and method. It comes with three carton feeders for boxes sized 115 x 65 mm / 120 x 106 mm / 110 x 120 mm. The set includes everything shown in the diagram: hopper, feeding conveyor, machine with scale, and discharge conveyor. Gsdpfexcu Sdsx Ah Dskf

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 8,735 mm, total height: 3,300 mm, total width: 5,795 mm, power: 40 kW (54.38 HP), MF-3626B is a full-automatic intelligent box making machine with double stations, good for high-speed large-sized mass production of various box types, such as mobile phone boxes, jewelry boxes, cosmetic boxes, watch boxes, etc. The range of making boxes is larger, which can better meet the needs of the modern packaging market. The appearance of the whole machine has been newly designed, which is safer and more beautiful. This machine adopts servo control system and image positioning system to realize automatic completion of paper feeding, gluing, gray board feeding, four corner pasting, positioning, box holding, edge wrapping, ear folding and folding forming. Driven by well-known brand servos for feeder, gluing and conveyor belts, it can be continuously variable, high precise, easy to adjust, and saves time; For the corner sticking part, different length of tapes can Gkedewb Sfuopfx Ah Dof be pasted in stages as needed; The positioning part adopts the image positioning system and the robot grabbing parts, largely improve the positioning accuracy and efficiency, the error range can reach ±0.1mm, and the positioning and debugging speed is faster; The forming machine adopts THK linear guide rail and virtual electronic drive, which is more stable, wear-resistant and more precise. It is smooth, and the size range of folding depth and folding ear length is also larger.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 6,850 mm, total height: 3,500 mm, total width: 4,600 mm, overall weight: 7,100 kg, power: 35 kW (47.59 HP), MF-6040A is a full-automatic intelligent box making machine with double stations, good for high-speed large-sized mass production of various box types, such as mobile phone boxes, jewelry boxes, cosmetic boxes, watch boxes, etc. The range of making boxes is larger, which can better meet the needs of the modern packaging market. The appearance of the whole machine has been newly designed, which is safer and more beautiful. This Gedewb Sf Ispfx Ah Dokf machine adopts servo control system and image positioning system to realize automatic completion of paper feeding, gluing, gray board feeding, four corner pasting, positioning, box holding, edge wrapping, ear folding and folding forming. Driven by well-known brand servos for feeder, gluing and conveyor belts, it can be continuously variable, high precise, easy to adjust, and saves time; For the corner sticking part, different length of tapes can be pasted in stages as needed; The positioning part adopts the image positioning system and the robot grabbing parts, largely improve the positioning accuracy and efficiency, the error range can reach ±0.1mm, and the positioning and debugging speed is faster; The forming machine adopts THK linear guide rail and virtual electronic drive, which is more stable, wear-resistant and more precise. It is smooth, and the size range of folding depth and folding ear length is also larger.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 8,865 mm, total height: 3,500 mm, total width: 8,322 mm, overall weight: 11,700 kg, power: 52 kW (70.70 HP), MF-4530 is a full-automatic intelligent box making machine with double stations, good for high-speed large-sized mass production of various box types, such as mobile phone boxes, jewelry boxes, cosmetic boxes, watch boxes, etc. The range of making boxes is larger, which can better meet the needs of the modern packaging market. The appearance of the whole machine has been newly designed, which is safer and more beautiful. This machine adopts servo control system and image positioning system to realize automatic completion of paper feeding, gluing, gray board feeding, four corner pasting, positioning, box holding, edge wrapping, ear folding and folding forming. Driven by well-known brand servos for feeder, gluing and conveyor belts, it can be continuously variable, high precise, easy to adjust, and saves time; For the corner sticking part, different lengths of tapes can be pasted in stages as needed; The positioning part adopts the image positioning system and the robot grabbing parts, largely improve the positioning accuracy and efficiency, the error range Gsdpfswb Sd Rsx Ah Dskf can reach ±0.1mm, and the positioning and debugging speed is faster; The forming machine adopts THK linear guide rail and virtual electronic drive, which is more stable, wear-resistant and more precise. It is smooth, and the size range of folding depth and folding ear length is also larger.