Used Blister for sale (43)

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Gsdpfx Aov S Eursabsuh Sold as seen

Condition: defective spare-parts repository (used), Manufacturer: Illig Gsdpfx Aasuk Dwfsbouh Type: HSA 50C The machine is incomplete and not operational! For spare parts only!!

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. Gusdpfxovubapo Aabsh The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Gsdev Nkvcopfx Aabjuh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Dimensions:3,550 mm x 1,050 mm x 2,300 mm Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Roll core diameter: 3" Roll diameter: 300 mm Cutting size: 130 x 100 mm Gusdpfx Aopfcd Aoabeh Forming depth:15 mm Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Condition: Like new (demo model)

Year of construction: 1996, condition: ready for operation (used), Heating output: 22.15kW, motor power: 2.5kW, max. compressed air supply: 10bar, including spare parts. Guedpsglvdysfx Aabsh

Condition: good (used), Year of construction: 2007, operating hours: 27,500 h, functionality: fully functional, machine/vehicle number: 069/530, Uhlmann blister packaging system UPS 4 ETX for processing PVC forming films and aluminum cover films Basic machine in modular technology and balcony design, with 12 modules: - Forming film holder with 2 pneumatic tension shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for forming film - Forming film unwinding, timed - 3-zone contact heating: - 6 heating circuits, individually adjustable - simultaneous heating of min. 3 feeds - Heating plates open automatically when machine stops - Forming station with 4-column lifting table guide - Clamping pliers for securing the film strip when machine stops - Filling section with safety flap, length 1,360 mm - Covering film unwinding on operator side with pneumatic tension shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns Lifting table guide: - integrated overload protection - automatic lifting of the upper sealing tool when the machine stops - Cooling station - Free module for installing an additional station - Clamping pliers feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punch grid Guodpovn R Ehsfx Aabeh - Monitoring of the compressed air supply with machine stop if the minimum value is not reached - Machine cover - Electromechanically locked protective doors on the operating side made of acrylic glass with individual identification for open doors/ hoods and display in the operating panel - Protective covers made of corrosion-resistant material - Fast format change thanks to: - Plug-in format parts - Plug-in connections for cooling water supply

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Guedpfsuhn Diex Aabsh Turntable

Year of construction: 2002, condition: used, functionality: fully functional, machine/vehicle number: EAPPS, User-friendly cold sealing machine for card to card Economical for small to medium batches Single station shuttle type medical and retail packaging sealer CE certified Shorter cycle times than heat sealing Gusdpfx Aswntl Nsabeh Energy efficient as no heat is required Maintenance free Quick set-up and changeover Low tooling costs Immediately available, almost new machine!

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: MP5035, The Heat shrink MP5035 Skin Packer by Sontex is a sealer machine designed for efficiently sealing heat shrink wrap materials. This product is specifically engineered to pack and ship products securely, ensuring a strong seal to prevent damage during transportation. With its reliable brand reputation and durable design, the Sontex Heat shrink MP5035 Skin Packer is a valuable tool for businesses in the packaging and shipping industry. Gjdpjwtzv Tofx Aabjuh Sontex MP5035 Skin Packer. We purchased this machine in 2018 as one of our client required products to be skin sealed, the client then had a change of plan. We therefore have never used the machine. However it was fully refurbished by Sontex the manufacturer when i purchased and more than happy to ensure its all in good order before collection. We have 4 rolls of 390 x 175 film and skin boards to suit. I've been holding to the machine "just in case" but I need the space back, viewing recommended. Size Wise when purchased we collected in a VW crafter. Collection only HP19 8UP Aylesbury

Condition: excellent (used), Year of construction: 2016, Automatic blister machine for forming or molding blisters in PVC, PVDC, Polyethylene, Aluminum, etc. Sealing, for joining the formed and loaded line with the product to the upper line of Aluminum, Cardboard, Polyethylene, etc. Thermoforming and heat-sealing area: 400 x 200 mm Includes a trimming unit for individual platelets, film unwinder/feeder, and winder for waste collection. Supplied with a reel handling cart, reel loading cart, and format changeover cart. Guedpfx Aaov I Ay Reboh 21 kW; 380 V III+N Overall dimensions: 7400 x 963 x h1900 mm

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Gedpfxsif Elgj Aabouh

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Available from Q1 2026 Technical data Blister module (B 1770) Max. output 700 blisters/min Gjdpjv D Ipijfx Aabeuh Application area: solid products Max. format range [feed x width] 200 x 284 mm Cartoning module (C 2305/C 2504) Max. output 300 or 500 folding boxes/min. Application area: blisters Max. folding box size [A x W x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm For details, see PDF

Condition: good (used), Production: alloyed Tip: 4 sec Turntable Gedpfx Ajuhn Dcoabjuh

Condition: ready for operation (used), Year of construction: 2009, Moulding depth: 12mmm, working area: 100x70mm, max. coil diameter: 250mm, speed: 1-30 cycles/min, with documentation, the machine was never used. Guodon R Nhfepfx Aaboh

Condition: ready for operation (used), Year of construction: 2003, A Klöckner blister packaging machine and cartoner are available. 1) Blister machine Klöckner CP200, year of manufacture: 2003, output: 50/min, formats X/Y min./max.: 50mm x 22mm/156mm x 115mm, max. draw depth: 12mm, film width range: 100mm-168mm, forming film diameter: 450mm, lidding film diameter: 240mm. Documentation available. 2) Cardboard packaging machine Klöckner P1500, year of construction: 2003, packaging capacity: 200/min, formats X/Y/Z min./max.: 20mm x 15mm x 50mm/250mm x 115mm x 190mm, machine dimensions X/Y/Z: approx. 5200mm/1500mm/1900mm, weight: approx. 4000kg, control: Siemens S7 PLC. Documentation available. Some parts of the machines have been dismantled. Gedpjucfw Ajfx Aabsuh

Condition: ready for operation (used), A complete blister packaging line including digital piezo inkjet printing HAPA Digimatic for individual inline aluminum lidding foil printing is available. Packaging capacity: 300 blisters/min, folding carton output capacity: 300/min, max. forming dimensions X/Y: 150mm/190mm, max. forming depth: 12mm, max. forming strokes/punching strokes per minute: 100/300, max. film width: 165mm, max. roll diameter forming film/lidding foil: 700mm/300mm. Min. folding carton dimensions X/Y/Z: 35mm/15mm/65mm, max. folding carton dimensions X/Y/Z: 105mm/100mm/160mm, min. blister dimensions X/Y/Z: 30mm/3mm/60mm, max. blister dimensions X/Y/Z: 100mm/12mm/150mm. System dimensions X/Y/Z: approx. 8300mm/1900mm/2500mm, weight: approx. 5500kg. Documentation available. An on-site inspection is possible. Gujdpfx Aaow N Sg Hjboh

Condition: reconditioned (used), > Top heating with pilot radiator control > Single radiators of the top heating > 2 cooling fans D05 > Automatic preblow and demoulding > Documentation and plans in German > Max. forming area 1210 x 500 > Longitudinal and cross cutter with 6 quick-change squeezing knives > Euro hole punching device (can be retrofitted at extra charge) > completely overhauled Gsdpfjfua Hujx Aabouh

Condition: used, Year of construction: 2006, Modular stand-alone blister machine, for maximum flexibility to connect with cartoners, wallet machines and flow pack machines, and any kind of line layout needs. Guodpoxd Ah Ajfx Aabsh OUTPUT: up to 400 – 600 blister/min REEL DIAMETER: up to 800 mm USABLE MATERIALS: ALU, PP, PVC, PVC/PVDC, Triplex, PVC/Aclar®, PET, COC and others BLISTER DIMENSIONS - Width: 30 - 90 mm - Length: 60 – 150 mm - Depth: 3 - 12 mm

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 801657, type of input current: three-phase, total height: 1,900 mm, input voltage: 380 V, total width: 1,150 mm, total length: 4,250 mm, overall weight: 1,500 kg, working height: 900 mm, compressed air connection: 6 bar, warranty duration: 6 months, air demand: 0.6 m³/h, power: 1.5 kW (2.04 HP), Equipment: documentation/manual, Indexed case packer ZHJ-150 Display machine/ trade fair machine Gjdpotib Uyjfx Aabjuh Multifunctional cartoning machine ZHJ-150 The ZHJ-150 automatic cartoning machine is suitable for packaging aluminum-PVC blisters, round bottles and special bottles, molded bottles and similar products. Instruction leaflets can be folded automatically, cartons erected, products fed in and the cartons closed again (offset plug-in closure). The cartons can be embossed. This machine has a PLC control system and each station is monitored by photoelectric sensors. If a problem is detected during operation, the machine stops automatically and indicates the fault. This machine can run as a single machine and can also be connected to a blister packaging machine and other pre-machines. The machine can be inspected at any time at our premises in 73084 Salach/Germany and tested with your products. Depending on the product, it is also possible to order a new machine from us. We also have various blister and cartoning machines to offer. Technical data: max. speed = up to 130 cartons/min Carton size = width (20-90mm) x length (50-190mm) x height (15-60mm) Leaflet size unfolded = Max.240x180mm (LxW) / Min.115x100mm (LxW) Leaflet folder = up to 3 paper folds possible Blister feeder magazine = 100cm long / number of blisters/cartons to be packed selectable Bottle feeder = screw conveyor Leaflet control in folding box available Automatic ejection of bad packs

Year of construction: 1999, condition: reconditioned (used), functionality: fully functional, A used and overhauled blister machine, model UPS1030 ET (94/125) Technical data - Format range Feed width maximum 142 x 255 mm Form depth maximum 10 mm - Output at least 15 cycles/minute - Output maximum 70 cycles/minute PVC - Output maximum 50 cycles/minute ALU Includes: - Form film roll carrier with two tension shafts, for maximum roll diameter 800mm, electromechanically foldable, including cutting and gluing table, painted neutral grey - Continuous conveyance of the form material with a contactless loop - Contact heating with 6 individually controlled heating zones (3 zones per plate) - Forming station prepared for PVC or aluminum form film with 4-column guide system - electr. Preparation for pore and crack detection (Visio-Scan) - Clamping pliers for securing the forming film in the forming station when the machine stops - Servo-controlled feed after the forming station, film shrinkage compensation guaranteed - Contact cooling with servo-controlled feed - Cooling water connection for upper and lower forming tool and lower sealing tool - Deflection with compensation pendulum - Filling section, approx. 1900mm with slanted brush and safety flap - Electrical preparation SimTap 2.i and brush feed - Sealing station for plate sealing and toggle lever drive, with 4 column guide (reinforced version with tuning domes) - Overload protection in the sealing station - Upper sealing plate automatically retracts when the machine stops - Cover film holder mounted on the back of the machine with 2 pneumatic tension shafts core diameter 76mm - Deflection shoulder for cover film with pressure presence control - Stretching station for cover film with touch probe controlled Stretching (print mark on the fly) - Contact cooling station after the sealing station - Feed before the punching station - Embossing station - Perforating station - Punching station, adjustable, including blister lowering - Waste cutter with integrated feed for immediate cutting from the waste grid - Compressed air monitoring - Sliding door panel, protective doors electrically switched for emergency stop when actuated 2-channel, made of plexiglass, hinged hood in the transfer area - Switch cabinet hinged on the back of the machine Mains 400/230 volts, 3/N/PE 50 Hz with neutral conductor and separate earthing. The stations were completely overhauled and the discontinued parts were replaced at the time of the overhaul. - Schneider PacDrive3 system with Pac2Touch Godpfor Ii R Usx Aabouh - Machine paintwork RAL 9007 - Linear translator with: o Lowering unit in the punching station o Good blister outlet below the punch with slide rails o Individual vacuum translator o Individual ejection with ejection counter control o Collection belt with separate drive o Transfer belt o Good blister clearer when the following machine is at a standstill - CE conformity with declaration of conformity - Two sets of operating manuals

Year of construction: 1987, condition: good (used), With a blister! Product: RUEZ Type: SFWW2 / 306DAU Year of production: 1987 Metal chain width: 200 mm Distance guide lanes: approx. 300 mm Chip outlet length 700/1300 mm Insertion length: approx. 1000 mm Insertion height 260 mm Total length: 3000 mm Godpfx Asgxqfcsabjuh Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min Engine power: 0.25 kW Mains connection was 400, 50 Hz Enclosure size: H x W x D; 1900 x 900 x 1300 mm Weight 300 kg Set of 2 pcs.

Condition: used, Year of construction: 2023, functionality: fully functional, Technical Details: Produces all shapes of Reinforcement steel Profiles Thickness 0.50-3 mm Bandwith max- 200 mm Production Speed: max. 15-20 mt/minute Width min- 22 mm max- 60 mm Depth min- 5 mm max- 60 mm Square Shape Max: 50 mm x 50 mm Square Shape Min: 20 mm x 20 mm Loading capacity of decoiler is max. 1000 kg. Decoiler: Guedpfxjxm Rq Rs Aaboh • Decoiler is manual system with brake lining. • Bandwidth capacity 300 mm. • Max. Coil inside diameter 550 mm. • Max coil outside diameter 1500 mm. • Tightening roll hub by mechanical ROLLFORM MACHINE: The machine has 14 stations to bend sheet step by step. • Shafts and pulleys manufactured from high-quality materials (4140) according to the techniques and reach hardness of 50-55 HRC. • Shaft diameter: 52 mm. / Bearing brand: SKF • The drive gears in each pulley of the stations are made of blister steel (8620) and reach hardness of 50-55. • The reductor is used in a drive system. The main body consists of gearbox and two blocks. Spacers on the rollers can be changed manually according to the dimensions of the profiles. • There is calibrating machine that comes after the roll forming machine to get the required flatness, linearity and twist. • Reducer and helical gears will be used in drive system. • There will be 18,5 kW engine with reducer in the form unit. • Motor brand: GAMAK / Reducer brand: YILMAZ / ÖZTEKFEN / POLAT You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Cutting is done with Flying Circular Saw. • The disc will be moved from down to up. • Length tolerance will be maximum +- 5 mm. • Saw motor will be 5,5 kW. SECOND CUTTING EQUIPMENT: You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Only U profiles can be cut with the hydraulic guillotine. • Cutting is done with Hydraulic Guillotine. • Length tolerance will be maximum +-5 mm • The cutting mold material will be 2379 steel. • Hydraulic unit tank: 40 Liter. • Hydraulic unit motor: 3 kW • Hydraulic motor brand: GAMAK / ELK Hydraulic parts brand: TEK HİDROLİK STACKING TABLE: Stacking table will be with pneumatic discharge system and conveyor. • There will be 1 kW engine on the run-out table. CONTROL SYSTEM: All parts of the electrical panel are made of first quality materials. (SIEMENS, SCHNEIDER, ABB etc.) • Production line will use 380v +/-%10, and 3 phase 25 kW of electrıcity and compressor with capacity of 6 bar and 500 liters. • You can cut the profiles of any length you need by only entering the parameters to the control panel. The PLC parameters include “jog speed, production pieces, actual pieces, manual and automatic productions settings, calibrating setting vs.”. PACKING EQUIPMENT: • The production line includes 2 pieces packing machine for metal strips. • Manual packing machine can make locked to metal strips for profile package.

Condition: used, Year of construction: 1971, Documented modifications / upgrades: Year Modification / Upgrade 1971 Installation of four-roll calender 18" × 54" (Comerio) 1971 Safety enhancements for CTI – SQ Gujdpfx Ajxf Ap Nsabsh 1986 Manual gauge monitoring system 1990 Width measuring unit 1993 Upgrade to eliminate internal blistering 1994 Modification of calender for single turn 2001 Upgrade MMI-Gum-Calender Y2000 2009 Cassette winders (2) incl. control cabinets 2009 Material width measuring system (SQ1) 2010 Overhaul gum calender (SQ-Cal.) 2012 Control system adaptation feed extruder SQ-calender 2012 Mechanical upgrade SQ-calender 2012 Gauge measurement system SQ-calender 2013 Overhaul of cooling line for gum calender (SQ-Cal.) 2014 Optimization of spool winder at SQ-calender 2018 New calender rolls Control system: Various modernizations (MMI 2001, control upgrade 2012) Technical data: Roll diameter 18", roll length 54" Maintenance / condition: Regular overhauls and modernizations documented 1971–2018 Accessories / options: Cassette winders, width measuring unit, cooling line, spool winder, gauge & width measuring systems

Year of construction: 1990, condition: good (used), With a blister! Gujdogxqgzspfx Aabsh Product: RUEZ Type: SFWW2 / DAS406 Year of production: 1990 Metal chain width: 330 mm Distance guide lanes: approx. 300 mm Chip outlet length 2000/1000 mm Insertion height 260 mm Total length: 3000 mm Transport height - ejection height: 1100 mm