Used Board Laminator for sale (4,869)

Condition: used, Year of construction: 2007, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: 65020107, Equipment: documentation/manual, Hello. My profession is picture framing. A few years ago, I retired and have decided to sell the machines I no longer need. One of them is a BVP 65 E /380 Biedermann vacuum laminating press - 1.80x1.30 m. I mostly used it to laminate posters, which I would then frame. However, you can also laminate graphics, drawings, photographs, silk, and batik. Ncjdpfx Adjx Dq A Ijwel The image is bonded to MDF in the machine using heat and pressure with a special film. At the same time, a laminating foil is applied to the image. The finished product is protected not only against dirt but also against UV radiation, and it is overall very lightweight. The lamination surface can be smooth or textured like canvas. Pictures with a textured surface look like they were painted on canvas. Various laminating films are included in the price—see the photo. The vacuum press is in good technical condition. Thank you for your response and have a nice day.

Condition: used, mileage: 7,866 km, power: 270 kW (367.10 HP), first registration: 05/2025, axle configuration: 2 axles, next inspection (TÜV): 05/2026, gearing type: automatic, Year of construction: 2022, Equipment: air conditioning, electronic stability program (ESP), FA XD 370 ZIKUN Swing-Board Body CRYSTAL WHITE Mechanical cab suspension Day Cab DAF Corner View Handles and trim: Black, side panels: cab color LED daytime running lights Chassis configuration front: floor plate Aero Central locking Windshield with sun protection film Beacon preparation on front of cab LED headlights, cornering and fog lights Adjustable roof spoiler for Day Cab Passenger seat: cinema-type with fabric upholstery Cab interior trim: Hexagon Cab wall trim: fabric Dashboard version: Vision Driver's seat, fixed base Interior trim color scheme: Luxury Passenger seat, fixed base Central storage compartment Steering wheel with silver accents Roof hatch with electric operation Driver's seat: Luxury Air Door panel: loosely woven fabric Automatic climate control for cab Coolbox or refrigerator Driver's seat armrest Dashboard table ECAS remote control with extended functions Auxiliary heater with waste heat pump and timer Adaptive cruise control with FCW and AEBS-3 DAF Connect FMS interface prepared Antennas: DAB-ready radio, 2x mobile, GNSS Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, Version G2V2 DAF Infotainment Luxury Plus, luxury speakers Electronic stability control (VSC) Lane departure warning system Reverse warning system Stabilink rear axle suspension Rear: Air suspension SR1344 Front axle 1: 6,300 kg, load index 148 Rear axle 1: 11,600 kg, load index 145 Rear axle capacity 13.00 t One ride height position, standard height Ncsdpfx Adoxtr N Iswol Front air suspension: medium Front: 8.00 t, air suspension, 161 N Silver grey wheel trims Front axle(s): 315/70 R22.5 Driven rear axle(s): 315/70 R22.5 Steel disc wheels, silver gray Standard transport, full version Manoeuvring mode Idle cut-off automatic, 5 minutes Automated gearbox, TraXon, 12 gears Automated transmission with manual mode – full version Traction control (ASR) Emission standard Euro 6 Rear axle ratio 2.47 Mechanical differential lock 12-speed TraXon transmission 12TX2010 DD, 16.69-1.00 MX-11 engine, 270 kW/367 hp, cab emblem: 370 Compressor 2 cylinder without clutch Drive rear axle with disc brakes Pneumatic control for parking brake Parking brake assistant MX engine brake Front underrun protection Exhaust pipe horizontal, low EAS unit right, horizontal with 45-l AdBlue tank left 340l fuel tank Splash guard Steel air tanks Wheelbase 5.10 m / rear overhang 2.75 m Side members 260/7.0 mm, continuous inner reinforcement Prepared for drawbar use, type plate, max. GCW Pneumatic connection for trailer, turntable coupling Cross member D137 + Rockinger coupling D130 Electrical connection for trailer, 24 V/15-pin Side marker lights Tail lift application Generator 110 A, batteries 2 x 175 Ah Front air intake ZIKUN Swing-Board I-Body Technical data: Through-loading length: 6,650 mm Cargo length: 6,800 mm Loading width at rear portal: 2,480 mm Internal loading width: 2,480 mm External width: 2,550 mm Internal through-loading height: 2,100 mm Approx. loading height: 1,177 mm Approx. overall height unladen: 3,479 mm Floor: Made of 24 mm thick vehicle construction panels UN folding swing mechanism. Upper folding side panels made of 25 mm aluminium composite panels with center locking Roof: Fixed roof Powder-coated in RAL 9010 pure white Bumper protection: Welded steel bumper strips on both sides as impact protection. Painting: The entire body sandblasted, primed, and painted in a single color or powder

Condition: used, Year of construction: 2003, equipment belts automatic bundling of parts up to 6 meters Ncsdpfx Aoycxtmedwel retaining forks rollers for feeding towards automatic strapping

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1800 Measurements depth 3450 mm Measurements height 950 mm Table Table load 200 kg This BARTH VMPH 3013 laminating press was manufactured in 2015. It features dimensions of 3450 x 1800 x 950 mm and a clamping area of 3000 x 1320 mm. The vacuum table supports up to 200 kg with a maximum vacuum pressure of -0.95 bar. It operates on 400 VAC/50 Hz with a connected load of 12 kVA. Consider the opportunity to buy this BARTH VMPH 3013 laminating press. Contact us for more information about this machine. Ncsdpfx Adjx Nr Ufowjl Application Types Pressing / Laminating

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 9,100 mm, total height: 2,900 mm, total width: 4,600 mm, product height (min.): 20 mm, product length (max.): 6,200 mm, product width (max.): 2,600 mm, overall weight: 40,500 kg, Double production solar panel laminating machine The laminator is used for manufacturing solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under the influence of pressure and temperature. The lamination process is conducted under vacuum to prevent unwanted entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. Ncodpfxexzrvks Adwol The machine comes with many spare parts and can be seen in operation.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1790051, working width: 1,000 mm, Laminating system Nodpfx Aexy Rb Nsdwecl

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product Ncjdpfsw Ic H Iex Adwol

Condition: good (used), Laminating machine Matrix MX 530 Machine in very good condition, comes from a small digital printing house. The set with the machine includes foil and user manual. Description: MATRIX is a semi-automatic laminating machine for hot laminating with a built-in sheet separator. The device is designed for laminating digital or offset prints in low and medium circulation. It can be operated by one operator at a speed of up to 10 m / min. Additional advantages are quiet operation and a small area it occupies in the printing house. Key features of the device: Semi-automatic mode (the operator feeds the sheets onto the table, the next cycle is automatic) Multi-level, adjustable „anti-curling” roller system straightening the sheets Built-in, automatic sheet separator Njdpovkt N Isfx Adwocl The device is suitable for both digital and offset printing Quick format changes and easy replacement of film rolls (3000m rolls) Device operation cycle: The programmer allows you to adjust the speed, overlap length and temperature The operator feeds the sheets manually The sheets are automatically taken by the rollers according to the set overlap Ready, separated sheets are delivered to the receiving tray Maximum film width 500 mm Maximum paper width 530 mm Maximum paper length 1200 mm Minimum paper format 200 x 300 mm Laminating speed up to 10 meters per minute Front table dimensions 668 x 542mm Paper weight 115-350 g/m2 Temperature 80 – 130 °C Warm-up time 10-15 minutes Dimensions 84x210x131.5cm Power consumption 1.5-2kW Power supply 230V,50Hz Weight with base 194/260kg

Condition: used, The GMP PROTOPIC II - 540 Laminator, serial number XK54S30033, is a professional laminating system designed for high-quality finishing applications. With a working width of 540 mm, it accommodates paper sizes up to 540 x 800 mm and as small as 210 x 200 mm, making it versatile for a wide range of production needs. Suitable for paper thicknesses from 120 to 350 g/qm2, the machine ensures consistent lamination results across different substrates. Nedpjxb Dn Ssfx Adwecl Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting careful use and maintenance. Compact, reliable, and efficient, the GMP PROTOPIC II - 540 Laminator is a practical solution for professional print finishing environments requiring durable and precise lamination. Format: 540 mm Equipment: Good condition without any damage Maximum paper size 540 x 800 mm Minimum paper format 210 x 200 mm Paper thicknesses from 120 to 350 g/qm2

Condition: used, Board sorting line Manufacturer: Lekopa Year of production: 1989 16 pockets Pack press Stacker with spacers Dynagrade Ncedpfjx N S Hbjx Adwol

Condition: excellent (used), Year of construction: 2001, Jumbo roll Ø paper max. 1600 mm Jumbo roll width min. 560 mm Jumbo roll width max. 1400 mm Jumbo roll Ø PE, PET max. 1000 mm Expanding chucks Ø 76 mm, 100 mm, 150 mm, and 300 mm Speed depending on material: 200 to 300 m/min. The Bielloni Castello Julia 2 SL laminating machine can process single-component PU adhesives with 100% solid content (solvent-free). The adhesive is applied via a sleeve system. Dispersion adhesives cannot be processed. The system does not feature a drying unit. The PU adhesive is applied to the paper web using heated rollers (approx. 70–90 °C). The bond between paperboard and film is achieved by pressure and subsequent self-curing. Paper grammage: 120 to 600 g/m², coated with PET min. 8 µm to max. 75 µm Nodpfoxlkckox Adwjcl PE min. 20 µm to max. 75 µm The machine can be demonstrated in production.

Year of construction: 2003, condition: used, functionality: fully functional, D&K Acculam 2760 Laminator with Feeder, Exit tray and Transformer. Recently removed from a printshop. Machine has been in full working order and producing live jobs. Machine is sold Ex works. No cutting unit is included. Machine is located in my warehouse in Tadley/Reading UK. Video in production on request. The D&K System 2760 (often referred to as the Acculam series) is a fully automated one-sided lamination system designed for high-volume, short-run digital and offset printing. It typically includes an automatic feeder, a laminator with curl management, and a flying knife separator. Ncodpfx Adjx Nawnjwsl Technical Specifications Max Lamination Speed Up to 60 fpm (18 meters per minute) Max Sheet Size 26" x 30" (standard) or up to 28" x 40" (B1 version) Min Sheet Size 8.5" x 11" (21.6 cm x 27.9 cm) Paper Weight Range 80 lb. Text to 18 pt. Board (approx. 115–350+ gsm) Temperature Range 180°F – 300°F (70°C – 140°C) Warm-up Time Approximately 20 minutes Electrical Requirements 230 Volt, 30 Amp, Single Phase Air Requirements 6 cfm (some models may require up to 8 cfm) System Dimensions 5' W x 14' L x 5' H Key Features Feeding System: Utilizes a state-of-the-art automatic suction feeder and belt table to ensure accurate sheet registration. Adhesion Technology: The System 2760 DN variant features two sets of heated nip rollers specifically for better adhesion to difficult digital prints like Xerox iGen or HP Indigo. Curl Management: A patented decurling system ensures sheets lay flat even when using thin paper or thick films like polyester and nylon. Versatility: Supports both thermal (heat) and pressure-sensitive (cold) lamination with optional release liner take-up for PSA products.

Condition: used, Year of construction: 2003, The Billhoefer MTS 104 is a high-performance laminating machine designed for professional print finishing. With a working size of 1045 x 1135 mm, it handles both large and small formats, supporting substrates from 150 to 450 g/sqm and foil thicknesses of 24 to 40 microns. Equipped with a flat pile feeder IA 20, suction feeder head, automatic rotary separator ITM 104, and jogger, the MTS 104 ensures smooth operation and consistent results. Its impressive speed range of 2500 to 4500 sheets per hour makes it ideal for demanding production environments. Currently located in Germany and actively used in a printshop, this machine combines reliability with versatility for a wide range of laminating applications. Format: 1045 x 1135 mm Equipment: Thermal laminating Flat pile feeder IA 20 Suction feeder head Automatic rotary separator ITM 104 Jogger Maximum laminating format: 1045 x 1135 mm Minimum laminating format: 215 x 215 mm Substrate thickness: 150 - 450 g/sqm Foil thickness: 24 - 40 microns Speed: 2500 - 4500 sheets/hour Njdpfxjxgm T Ij Adwscl

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports. Nsdpevkg H Tefx Adwjcl   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Condition: used, functionality: fully functional, Julabo RD Keypad and Presto Chiller Digital Controller and board. Nsdpfjt Dag Nsx Adwocl Good working condition. Please check out our other listings as well.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x chipboard, used dimensions: approx. 2.630 x 590 mm (WxD) Chipboard thickness: 22 mm Remark: if necessary in two parts Remark: The chipboards are used and may show slight damages! General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet Ncodpfsh A Hzpsx Adwol (without unloading)

Condition: good (used), Primultini cutting band saw Roll diameter 1300mm Ncjdpod Sclhsfx Adwjl Roll width 140mm with Planomatic system

Condition: excellent (used), Raimann B4 cutting band saw Ncsdpfx Adedyccdowjl

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Lamina GL 1400 Year: 2017 Max size: 1400 x 2150 mm Min width: 70 mm Glue type: 2 guns with hot melt by Nordson Extras: 2 cold tape guns adhesive Very good condition Available immediately Located: Europe Eastern Nodpfx Ajwna R Eedwscl

Condition: good (used), Year of construction: 2015, Coating Machine Tech. Data: Ncedox R Uvzepfx Adwol - Sheet size min.: 200 x 250 mm / max.: 520 x 740 mm - Max. speed: approx. 32 m/min - Pile height: 500 mm - Paper weight: 115 - 350 g/m² - Power supply: 400 V, 50 Hz, 24 A - Dimensions (LxWxH): 352 x 135 x 125 cm (incl. table) - Weight: approx. 750 kg - Coating machine for UV and dispersion varnishes as well as primers - Suitable for all types of paper and cardboard - Central touchscreen control panel - Fully automatic pile feeder with KOMFI feeder head - Air knife in the coating unit - 3-roller coating system - Heated coating transfer roller - IR unit with hot air blower - Adjustable UV lamp with premium-quality reflector - Simple varnish refill system - Compressed air connection required - Vacuum pump included

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Nodpfsya H S Ssx Adwecl Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices Ncsdedkp D Hjpfx Adwol TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: excellent (used), Vivid Easymount EM-1650DH Manufacturer: Vivid Laminating Technologies Easymount EM-1650DH Laminator Description: For sale is a professional laminator Easymount EM-1650DH from Vivid Laminating Technologies. This machine is ideally suited for print shops, sign makers, or graphic studios, and enables high-quality double-sided hot lamination up to 1650 mm width. Overview & Applications: The Easymount EM-1650DH is a powerful, double-sided heated wide-format laminator designed for professional use in print finishing and sign production. It is excellent for: - Posters, graphic prints, signs - Mounting onto boards - Pop-up displays - Vinyl, adhesive films, and application tapes - Outdoor advertising and banners The machine enables both hot and cold lamination, as well as mounting work with double-sided lamination for precise results. Features & Benefits: - Professional-grade double-sided hot lamination - Robust industrial quality for daily use - Ideal for banners, posters, signs, roll-ups, displays, etc. - Also suitable for board mounting - Easy operation via clear digital panel - Compatible with all common 3" film rolls - Optional accessories available (e.g., take-up system, additional mandrels) Model: Easymount EM-1650DH Series: Code EM-1650 Max. Film Width: 1650 mm Model Type: DH = Double Hot (heated upper & lower roller) Suitable for: professional double-sided hot lamination Technical Specifications: Feature / Value Laminating speed: 6 m/min Ncsdpfjw Ebckox Adwsl Laminating width: max. 1650 mm Max. material thickness: 25 mm Roll diameter: 130 mm Warm-up time: approx. 20–25 minutes Roller heating: Infrared (internal) Temperature range: 0–130 °C Control panel: Digital Pressure adjustment: Manual with display Film core: 75 mm (3") Dimensions (W×D×H): 1990 × 650 × 1255 mm Power supply: 220/240 V, 32 A, 3200 W Weight: 365 kg Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications reserved!) Shipping: Pick-up preferred, shipping by freight forwarder possible upon request! For further questions, please feel free to contact us by phone.

Condition: good (used), CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, power board Nedpspz Sflofx Adwscl -Manufacturer: Heidenhain, power board CNC control -Type: PL 405 B -ID No.: 263 371 22 -Voltage: 24V -Quantity: 2x circuit board available -Price per piece -Dimensions: 280/230/H50 mm -Weight: 1.2 kg/pc.

Condition: ready for operation (used), Fanuc A16B-2203-0033 / 02B100012 Board, used, normal signs of use, 100% functional, scope of delivery as per photos Ncsdpot N Dt Dsfx Adwel