Used Board Shear for sale (5,545)

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm Rodsv Tzphspfx Adbebt - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm plate thickness . mm Rbsdjq Dta Ijpfx Adbet 8mm distance between columns . mm

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg Rbedpfohxzmcjx Adbst +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2013, Economically stable motorized guillotine shear (used) Heavy-duty welded steel construction Technical Data: Condition: good used, ready for operation Year of manufacture: 07/2013 The machine is powered and can be viewed by appointment! Weight, approx.: 2,580 kg Sheet thickness for St. 42 (max): 3.5 mm Max. sheet length: 2,500 mm Backgauge: 20–1,000 mm Cutting angle: 2° Rjdpfoxxia Isx Adbjbt Working height: 800 mm Strokes per minute (automatic mode): 45 strokes/min Electrical connection: 400 V Motor power: 7.5 kW Dimensions: 2,900 x 1,350 x 1,200 mm Electric backgauge Digital measuring system for backgauge Light curtain

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Rjdpfx Aoyag Uajdbebt Max. number of strokes/min 30 Min. blade clearance 0.1 mm electric powerd back guage with elgo "go-to" controller plate following system at back guage

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Hydraulic guillotine shear HACO HS 4013 capacity : 4000mm x 13mm electric powered back guage Rbodpfx Adeyag Tiobst

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, working width: 1,500 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, power: 7.5 kW (10.20 HP), overall weight: 3,500 kg, total length: 2,200 mm, total width: 1,800 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Hydraulic Guillotine Shear / Sheet Metal Shear Haco SST 150 / 4, year of manufacture 2006, Technical data and features: Cutting capacity 1500 mm x 4 mm, machine length 2200 mm, width 1800 mm, weight 3500 kg. Torsionally rigid, fully welded steel frame, stainless steel blades, stroke counter, independent hold-downs, cutting line illumination, softly padded hydraulic hold-downs. Option to increase cutting speed by reducing capacity, pre-selection control for positioning the backgauge to the desired position, 1-meter angle stop with T-slot scale and a swivel stop, complete cutting table with T-slots at 1500 mm and 2000 mm, motorized swiveling backgauge with adjustment via front control panel, 650 mm stroke, etc. Rbedpfx Ajydfhmsdbet The machine comes from a government institution and is in top condition! Please see the photos! The machine is incoming, more photos will follow.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Sheet width: 3050 mm Sheet thickness: 10 mm Cutting angle: 0.5-3 ° Number of hold-downs: 18 units Strokes: 22/7 strokes/min Working height: 900 mm Total power requirement: 20 kW Machine weight approx.: 8,500 kg Space required approx.: 3800 x 2100 x 2100 mm Rbjdpfxex Sv Uus Adbjt

Condition: used, Used Press Brakes and Shears available – various capacities and working lengths Photo 1 – Press brake GEKO – 100 ton – 3050 mm Photo 2 – Synchronized press brake VICLA – 125 ton – 3100 mm Photo 3 – Synchronized press brake WARCOM FUTURA – 200 ton – 4550 mm Photo 4 – Press brake GADE – 50 ton – 4050 mm Photo 5 – Press brake CML – 100 ton – 4100 mm Photo 6 – Shear GEKO – 3050 x 6 mm Photo 7 – Shear VICLA – 3050 x 8 mm Rodpfx Asyabn Usdbobt Photo 8 – Shear BL – 3050 x 5/7 mm Photo 9 – Shear AMADA – 4000 x 8 mm Photo 10 – Shear OMAG – 2050 x 4 mm

Condition: good (used), Year of construction: 1995, Sheet width 6500 mm sheet thickness 3 mm backgauge - adjustable 1000 mm weight approx. 15000 kg Rbjdpfxeidx H As Adbst dimensions 7500 x 3000 x 2500 mm

Condition: new, functionality: fully functional, Sheet width: 2550 mm Redpfxsx Sq D Ds Adbsbt Sheet thickness (mild steel): 4 mm Sheet thickness (stainless steel): 2 mm Back gauge: 750 mm Total power: 7.5 kW Machine weight approx.: 3050 kg Dimensions: 3300 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with high static and dynamic frame rigidity - Direct drive with brake motor - Special alloy cutting blades - 750 mm motorized, digitally adjustable back gauge with ball screw spindles - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic backing - Worktable with infeed plates - Foot pedal for single and repeat cutting cycles - 1 x squaring arm, 1000 mm length with metric scale - 2 x front support arms, 800 mm - Front stop - Finger guard – front and rear covers - Rear light guard devices - CE declaration of conformity

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl. Device features: - Guillotine shear MSB 200 - Cutting capacity as per nameplate: up to 3 mm steel; significantly higher for aluminium - Working length: just over 2 m - Manual backgauge: 750 mm - Side/angle stop - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 m - Sheet thickness for steel: 3 mm - significantly higher for aluminium and zinc - The machine has been used extremely rarely, approximately 1–2 times a month for thin sheets by a lamp manufacturer - Hardly any signs of wear – this condition is rare - The total price is less than half of the current price – the price list shown is from last year! - If you have any questions, please feel free to call briefly - We have this set twice, as well as other models like the Schechtl MAX 200 – 2.5 mm or MA 200 – 2 mm - Current net list price for both machines – see pictures - You will receive an invoice with VAT shown separately - Shipping by forwarding agent can be arranged if desired, forklift available Free loading, as shown in the pictures Inspection and testing possible by telephone appointment Payment in cash on collection – if there is anything else I can do for you, please give me a quick call – thank you Collection should take place within 8 days after the end of the auction. Article number Rbsdpewfzztofx Adbst

Condition: used, Year of construction: 2001, operating hours: 10,900 h, functionality: fully functional, A fully functional scrap shear is being offered for sale. Rbedpfeyftwxjx Adbjt

Condition: good (used), Year of construction: 2020, CNC ESA blade clearance adjustment via CNC, manual cutting angle adjustment, thin sheet support. Year 2020. Rbodpjyanqijfx Adbot

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting force: 850 t, power: 3 kW (4.08 HP), empty load weight: 1,40,000 kg, year of last overhaul: 2022, We offer this ready-to-use Lefort CC-850TON scrap shear/baler, year of manufacture 2008 (completely overhauled in 2016 by Corema (Lefort)). Rbedpsyft D Sefx Adbot Machine type: CC-850TON Serial number: 359 The shear was fully overhauled in 2016, and the shear head was overhauled again by Corema (Lefort) in 2022. All invoices for the refurbishment are available. All documents (manual, plans, spare parts catalogue) are also available. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Rbodeyanx Hopfx Adbjt Click on the link below to see a video of the machine running.

Condition: good (used), Year of construction: 2015, machine/vehicle number: C100298, Offer 26007 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity: - For steel sheet: 6.35 mm - For stainless steel: 4 mm - For aluminium: 8 mm - Adjustable cutting angle - Cutting length adjustment - Cutting line illumination - Number of hydraulic hold-downs: 14 pcs - Backgauge with AMADA positioning control: 10 – 1000 mm - Front squaring arm: 3000 mm Rbjdpfoyc Uuyox Adbst - Support arms: 1500 mm - Rear area safety with light barrier - Electric foot switch - Strokes per minute: 12 – 26 - Drive: 400 V / 5.5 kW - Table height: approx. 860 mm - Floor space requirement incl. backgauge, without front support arms: approx. W 3800 x H 1950 x D 2300 mm - Weight: approx. 6500 kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,000 h, machine/vehicle number: 9375, control type: manual, degree of automation: semi-automatic, actuation type: electric, working width: 3,020 mm, sheet thickness (max.): 1 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, table height: 850 mm, back gauge adjustment: manual, back gauge: 520 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,400 kg, total length: 3,350 mm, total width: 700 mm, total height: 1,120 mm, Equipment: emergency stop, foot remote control, We offer a used OK GÉP XCM 3 sheet metal shear, year of manufacture: 2018. Type: XCM 3 Serial number: 93/75 Date of manufacture: 2018.11 Max. shearing force: 1 MN Redpjx Upfxsfx Adbebt Power requirement: 3 N PE AC 50 Hz 400 V Motor power: 4 kW If you have any questions or need further information, please send us a message or call us.

Condition: new, Year of construction: 2025, Available in following capacities: 1100 x 4/1100 x 5/1100 x 6 mm 1370 x 4/1370 x 5/1370 x 6 mm 1600 x 4/1600 x 5/1600 x 6 mm 2100 x 4 2600 x 4 mm 3100 x 4 mm Standard features: -NC controlled backgauge 750 mm with recirculating ball spindles -NC controller including cutting counter -Single cut, continuous cut and inching mode changeover -mobile foot switch with EMERGENCY STOP Angle stop on the left side with T-track -Table extension -Roller balls in the table -manual cutting gap adjustment from the front -Cutting line lighting - All-steel knife 2-edged - Sheet metal hold-down device with hard rubber strip to protect polished sheets -Light curtain on the back of the machine instead of a safety grille (CE) -Foldable front security grille (CE) Rjdpfx Asgu N E Dedbobt -Optical function display on the front of the machine -CE conformity -2 years full guarantee -3 years on engine and gearbox Optional accessories: -Adjustable angle stop with degree scale and mm graduation -pneumatic sheet metal holder -ELGO 9521 NC controller -Sheet ejection to the front - Sheet ejection to the front including a pneumatic sheet holding system (optional sheet ejection to the front or back over the entire cutting length with NC controller FUJI touchscreen (return to sender) -Table extension with tilt stop and T-slots -Special knife for VA steels -Special color on customer request

Condition: used, Year of construction: 2004, operating hours: 19,000 h, Serial number: 873xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20699 Specifications: 2004 model Approx. 19,000 hours Weight: 17,750 kg Machine width: 253 cm Outriggers Dozer blade Tires (see photos) Two-piece boom Auxiliary hydraulics Minor hose sweating Trailer hitch Cab door lock not working Broken front window Climate control Lights Ready for delivery Description: 2004 Volvo EW160B wheeled excavator with outriggers, blade and two-piece boom.Faults and wear are present; some refurbishment should be expected.Ready for delivery. Hours: 19000 Own weight: 17750 Total Weight: 17750 Width: 253 Redjwqwrrspfx Adbsbt Model: EW160B hjulmaskin m/ støtte bein og skjær

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Rbsdpjx Symnsfx Adbot Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: used, Technical details: Rodpfx Adeu Icghsbsbt round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: Rbjdpfx Asu Icppsdbjt -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank Rbjdpfx Asu Icp Aedbjt i.D. *

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m Rbodsu Icqaspfx Adbet MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *