Used Bobst Folder Gluer for sale (51)

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 030400811, type of input current: DC, Original Bobst HANDYPACK collecting table, in good used and refurbished condition. Output on the right side, can also be modified for the left side. Immediate availability. Bljdpfx Ajzk Up Eektep

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Bobst Mistral 110 HHS 4 glue nossels Prefold 1/3 Straight line Bsdsym A Hxjpfx Aktelp Crash lock 4 points glue 6 points glue Max speed 400 meter per minute Till 800 gsm carton , N, F and E Max format 1100 x 800 mm Min format 126 x 60 mm

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 578 034 05, Bobst Autoplatine SP 104 ER Year: 2001 Serial Number: 0578 034 05 / 0531 021 05 Automatic die cutter for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop and pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centerings at stripping and delivery stations Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard and corrugated board up to 4 mm 4 laterally guided transport belts Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm Upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centerings, ±0.9 mm Lowering of the chain guides Waste Stripping Station System with 3 pull-out frames Beds Afwrvopfx Aktolp 2x upper pull-out frame 2x lower pull-out frame Central quick locking pull-out frame Blank Stack Delivery Station Automatic binder sheet inserter Gripper opening device for full sheet stacks Automatic non-stop device Special non-stop rack for small boxes below 140 mm Pile raising security Waste / skeleton removal apron Braking brush of the waste skeleton Front trim ejection control by photocells 2x upper pull-out frame Lower pull-out frame Pallet changing device with conveyor Technical Details Parameter Value Production Rate 8,000 sheets/hour Max Sheet Size 1,040 x 740 mm Min Sheet Size 400 x 350 mm Max Die-Cutting Size (with gripper margin) 1,040 x 725 mm Max Cutting Die Size 1,050 x 746 mm Convertible Stock Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Parameter Value Max Platen Pressure 2.5 MN (250 t) Max Pile Height Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size 1,200 x 800 mm Compressed Air min. 6 bar; without central supply, a compressor of 80 m³/h with 500 l tank is required Net Weight 20,000 kg Electricity Main motor 11 kW, total connected load max. 25 kVA still connected to power

Condition: excellent (used), Year of construction: 2017, Ref: 11168 . 2017 Bobst HANDYPACK GT Semi-Automatic Carton Collecting & Packing Table For use at the delivery of a folder-gluer, collects folded and glued cartons and presents them for easy manual packing. Features: • Assists efficient carton collection and manual packing • Adjustable carton flow for handling delicate products • Flexible positioning at the folder-gluer delivery • Quick setup and changeovers • Compact, mobile design Specification: Minimum folded carton size: 80 × 50 mm Maximum folded carton size: 500 × 400 mm Solid carton board: Up to 700 g/m² Corrugated board: N, F and E flute, subject to material properties Collection: Continuous carton rows or counted batches Conveyor speed: Adjustable Collection conveyor height: Adjustable Carton layer thickness: Adjustable Bjdj Af Tqnopfx Aktolp

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Bsdsx S Uuyjpfx Aktslp Width 2200 mm Weight 7000 - 10000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, BOBST Domino 72 Folder Gluer for sale! Year 1992 Cold glue system ERO with 2 glue guns Max width 720mm Min width 126mm Max speed 400m/min Compact cardboard up to 600g/m². Automatic bottom system Bodpfxexlki Re Aktolp Counter ejector

Condition: excellent (used), Ref: 11167 . 2020 Bobst HANDYPACK GT Semi-Automatic Carton Collecting & Packing Table For use at the delivery of a folder-gluer, collects folded and glued cartons and presents them for easy manual packing. Features: • Assists efficient carton collection and manual packing • Adjustable carton flow for handling delicate products • Flexible positioning at the folder-gluer delivery • Quick setup and changeovers • Compact, mobile design Specification: Minimum folded carton size: 80 × 50 mm Maximum folded carton size: 500 × 400 mm Blodpfx Ake Af Tl Hstjp Solid carton board: Up to 700 g/m² Corrugated board: N, F and E flute, subject to material properties Collection: Continuous carton rows or counted batches Conveyor speed: Adjustable Collection conveyor height: Adjustable Carton layer thickness: Adjustable

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, We sell directly. Make-Ready Table for Bobst 106 E/ER We offer a professional table for the pre-preparation and alignment of die-cutting tools, as well as a cleaning section located outside the die-cutting machine. This device reduces the machine setup time (make-ready) of the Bobst machine by up to 30-40%. Technical data and specifications: Compatibility: BOBST 106 E /ER (SP / Novacut / Visioncut / SPeria series) Working format: Max. sheet format 1060 x 760 mm. Basing system: Fully compatible with the Centerline II system (fast and precise tool centering) Construction: Stable, steel frame with an ergonomic work surface and shelves for accessories/frames Bodpfx Aozuwazsktelp Included equipment: Basing strips and millimeter scales Clamping system Additional elements - additional frames (without the tools visible in the pictures, i.e., pins and telescopes) Technical condition: Condition: Excellent, 100% technically sound, locking mechanisms operate smoothly. Location of the device: Dąbrówka / Poznań, Poland Logistics and delivery Delivery terms: EXW (self-collection by the Buyer) / Possibility of arranging transport at the Buyer's expense. Availability: Immediate (the table is secured and ready for loading).

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Bledpjzmyfdefx Aktep Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double sheet detection Attention: In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Year of construction: 1990, operating hours: 21,834 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 059700605, Bobst SP 142-CER from 1990 for sale – Reason for sale: replacement investment made. The machine can be inspected in production. Dismantling and transport at buyer's expense. Bledpfjy Htxgex Aktep

Condition: good (used), Year of construction: 1980, functionality: fully functional, lateral stop: 1,420 mm, cutting width (max.): 1,420 mm, Bobst SP 142 ER from 1980 for sale – reason for sale: a replacement investment has been made. The machine can be inspected during operation. Dismantling and transport are the responsibility of the buyer. Bjdpfo Afbxmox Aktolp

Year of construction: 2019, operating hours: 7,400 h, condition: excellent (used), Pwer Register 2 New SMart Feedeer 2 Bodo Ad I Ulopfx Aktelp Elevated 400 mm. Format max. 76x106 cm Format min. 35x40 Max speed 8,000 f/h Minimum 70 g/m2 paper Cardstock max 2,000 g/m2 Corrugated cardboard up to 4 mm. Hours worked 7,300 Bernoulli device Available Febr. - March 2027

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. The machine is in very good condition and can be inspected (disassembled). Bsdpfx Akjztq Ezotslp Max. 1100 mm, min. 126 mm.

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight Bjdpfx Ao Afv Szektelp 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! Bledpozt Iduofx Aktsp A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Year of construction: 1998, condition: used, functionality: fully functional, Automatic die cutter for paper and carton converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is equipped with an automatic waste stripping station and a pile delivery with manual non-stop rack and front waste removal device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping station. Equipment ###Machine Platform with safety barrier Machine elevated by 415 mm, including platform elevation Centerline system for off-press tool preparation, quick registration, and fast setting of adjustable elements Electrical cabinet with air conditioner Light beam indicator for machine state Sheet passage control unit with infrared cells 4 auxiliary control panels C.U.B.E. centralized microprocessor control unit with LCD display and keyboard for sheet counting, cutting force with adjustable overload limiter, speed setting, and synoptic status display Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at stripping station Three-phase asynchronous main motor with frequency converter control ###Feeder Floating pallet tray with manual handle for lateral adjustment during production Suction unit with multiple adjustments Pile height control with front photocell Side blowers laterally adjustable with Centerline marks Automatic vertical compensation of the suction head Manual non-stop device Sheet synchronization device adjustable during operation ###Feed Table Anti-static stainless steel plate Upper transport for paper, carton, and corrugated board up to 4 mm Upper frame with manual lifting device 4 fixed position lower feed belts 4 paired adjustable front lays Pull guide (OS) adjustable with Centerline marks Sheet presence control and double sheet detector Sheet synchronization device with manual adjustment, machine stopped ###Platen Press 3x upper chase with quick locking, fixed bottom plate Lower ground steel cutting plate, 5 mm Lower supporting plate of synthetic material, 22.5 mm Device for die-cutting without gripper margin Gripper bar reopening device Compensation plate, 4 mm ground steel Adjustable centerings for the lower supporting plate, ±0.9 mm ###Waste Stripping Station 2x upper pull-out frame 2x lower pull-out frame Central quick lock pull-out frame ###Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size: (with gripper margin) 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,400 mm (non-stop 1,100 mm), delivery 1,120 mm Max Pallet Size: 1,200 x 800 mm ###Compressed Air Blodpfs Afvrujx Aktjp min. 6 bar; without a central supply, a compressor of 7.5 m³/h with a 110 l tank is required ###Net Weight 15,000 kg ###Electricity Main motor 11 kW, total connected load max. 25 kVA Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: used, Year of construction: 1997, Format: 1300 x 920 mm Equipment: Maximum die-cutting size with front waste: 1,300 x 905 mm Maximum die-cutting size without front waste: 1,300 x 915 mm Maximum embossing size: 1,300 x 900 mm Paper: approximately 80???90 g/qm2 and above Solid board: up to approximately 2,000 g/qm2 Corrugated board: up to approximately 4 mm Equipment: Operating platform Machine raised by approximately 650 mm Removable platform section at the feeder Recently installed asynchronous main motor Bjdpfx Asz Hnayjktolp Manual non-stop feeder pallet Pile table with manual lateral correction during production Adjustable suction unit Automatic feeder-head adjustment Double-sheet detection Sheet down-holder for guiding sheets to the front lays Upper frame with manual lifting device Upper transport equipment for paper and cardboard Die-cutting, pressing/creasing and embossing, separately or simultaneously Oil conditioner for maintaining the correct operating temperature Automatic removal of internal and marginal waste Condition and availability

Year of construction: 1981, condition: good (used), Typical specifications for the SP 142 ER model: • Maximum sheet size: 1,420 × 1,020 mm • Minimum sheet size: approx. 700 × 500 mm Bedpfj Agwu Esx Aktjlp • Maximum production speed: approx. 6,000 sheets/hour • Maximum cutting pressure: approx. 600 tons • Automatic die-cutting • Stripping capability • Blank separation, depending on the installed configuration • Suitable for solid board and corrugated materials

Year of construction: 1971, condition: excellent (used), Bobst Autoplatine 126 E Year: 1977 Bjdpfx Ae Aa Ivboktslp Maximum speed: 5500 sheets/hour Maximum size: 1260 x 920 mm Minimum size: 350 x 500 mm Maximum force: 500 tons Die-cutting In production Available immediately

Year of construction: 1989, operating hours: 55,929 h, condition: used, functionality: fully functional, Manufacturer: BOBST SA, Switzerland Model: AUTOPLATINE SP 142-E Year of Manufacture: 1989 Machine Type: Automatic Die-Cutting Machine Technical Specifications Operating Hours: 55929 h Non Stop sheet inserter Centerline System: Yes Delivery (automatic) Maximum Sheet Size: 1,020 × 1,420 mm Minimum Sheet Size: 500 × 700 mm Maximum Production Speed: 6500 sheets/hour Bodpfxjz Tzvij Aktelp Maximum Die-Cutting Force: 600 tons (6 MN) Suitable Materials Cardboard: 80–2,000 g/m² Corrugated Board: F, E, R, B, FF, FE, FB and EE flute types

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Bsdpfxouk I Nxo Aktolp

Year of construction: 1989, condition: excellent (used), Bobst Autoplatine 142 E Year: 1989 Max. speed: 6500 sheets/hour Max. size: 1420 x 1020 mm Min. size: 700 x 500 mm Max. force: 600 tons Stripping function Bodpo Aa Ivzefx Aktslp Currently in production Available immediately

Year of construction: 1981, condition: excellent (used), Bobst Autoplatine 142 E Year: 1981 Maximum speed: 6,500 sheets/hour Maximum size: 1420 x 1020 mm Minimum size: 700 x 500 mm Maximum force: 600 tons Die-cutting Blodpfxe Aa Ivns Aktjp

Year of construction: 2003, operating hours: 50,000 h, condition: excellent (used), functionality: fully functional, Item for sale: Bobst Sprintera 106-PER. Fully documented! Copies of invoices for service and overhauls are all available! Completely overhauled power register! Linear drives new Inverters new Complete pallet transport/machine logistics system new Bobst Sprintera 106-PER Year of manufacture: 2003 Max. format: 760 x 1060 mm Min. format: 400 x 350 mm Max. speed: 12,000 sheets/hour Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop delivery Quick-locking system Pricing according to customer requirements. Please do not hesitate to contact us if you have any further questions. Blsdpfx Akszp Hcuotsp

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Bljdpotyqizjfx Aktop Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE