Used Foil for sale (851)

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Pgsdpszv Niwefx Aphor Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: good (used), Italdibipack Mecpack FS + FornoTouch 5525EV Sealer with Shrink Tunnel Pgedpfx Aezur Dhephjr Made in Italy. This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply insert the product into the shrink tunnel, and the machine does the rest. Machine parameters are set from the control panel. Sealer dimensions: 600 x 500 mm Tunnel entry dimensions: 550 x 250 mm Weight: 770 kg Power supply: 380V Installed power: – sealer 2.5 kW, – tunnel 7 kW. Capacity: approx. 2,400 pcs/h Includes a short roller conveyor for product removal.

Condition: good (used), E Shrink Packaging LB-728 + LB-201 Angle Sealer with Shrink Tunnel This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply place the goods to be packaged on the conveyor belt, and the machine does the rest. Machine parameters are set from the control panel. Sealer dimensions: 565x460mm Tunnel entry dimensions: 370x230mm Weight: 550kg Power supply: 380V Pgsdpfozur Awox Aphjr Installed power: 14 kW (total peak power, continuous operation max. 5 kW) Capacity: approx. 1560 pcs/h

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Psdpfx Apszur Adshegr Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: good (used), DEM GP4520 APM Angle Sealer with Shrink Tunnel Made in France. The machine is in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply insert the product into the packaging and the machine does the rest. Machine parameters are set from the control panel, including sealing time, material feed time, sealer open time, conveyor belt speed, etc. Sealer dimensions: 470 x 555 mm Weight: 400 kg Power supply: 380V Installed power: 8 kW Capacity: 900 pcs/h Psdpfxjzurzmo Aphogr

Condition: used, Year of construction: 1978, Gierlich P 6000 Hot Foil Stamping Machine Stamping force: 6,000 kp Stamping area: approx. 250 × 150 mm Electrically heated embossing plate Pgedpszvxyfsfx Aphor Power supply: 220 V Power: 1.75 kW Suitable for hot foil stamping and blind embossing on paper, cardboard, leather, synthetic leather, and plastic. Training machine—in excellent condition—has produced only 2,510 books Available on short notice

Condition: used, Year of construction: 2007, Foil wrapping machine BVM BM 6030 W Year: 2007 Description: - Right hand infeed - Foil unit Pgodpezvd I Iefx Apher Shrink tunnel BVM SC 6530

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy Pgodpfxszph N Ae Aphsr – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, Year of construction: 1989, For sale is a robust GIERLICH hot stamping machine (hot foil stamping machine) in good condition. Technical data: Manufacturer: GIERLICH Type: PE 1200-2400-2P electronic Year of manufacture: 1989 The machine can be inspected near Solingen by prior arrangement. Sale ex works. Pedpezi U Thofx Aphogr Subject to prior sale. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial businesses and without warranty.

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. Psdjff Huwepfx Aphogr With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: good (used), Year of construction: 1975, functionality: fully functional, MACHINE FOR PRODUCTION OF THREE SIDE SEAL BAGS Pgjdezkugwjpfx Aphsr Model: W&H Type: CS II 3202/60 Year :1975 Capacity: 80 pcs/min. Max. dimension of the bag 400×600 mm. Renovated! Machine in very good condition and can be seen in working production.

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Pgedpfx Apeyilyqjher Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 1,370 mm, total length: 2,950 mm, total height: 1,800 mm, We offer this used Profi Packer SCV 400 film wrapping machine, manufactured in 2012. Manufacturer: Profi Packer Podpfozvdadex Aphsgr Model: SCV 400 Year of manufacture: 2012 Condition: used Category ID: 1262 Type ID: 907 Machine type: Film wrapping machine Machine dimensions (L x W x H): 2,950 x 1,370 x 1,800 mm Cycle rate per minute: approx. 65 cycles Film thickness: 7 to 80 μm Includes infeed conveyor and hot air tunnel for heat sealing. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Audion Sealmaster Magneta 421 MG-2 Heat Sealer – 420 mm – 600 W Audion Elektro Sealmaster MAGNETA 421 MG-2 Impulse Heat Sealer. This device is suitable for sealing plastic bags and films and is designed for professional or commercial use. Data according to the nameplate: Model: Audion Sealmaster Magneta 421 MG-2 Year of manufacture: 2012 Sealing length: approx. 420 mm Seal width: approx. 3 mm Voltage: 230 V Frequency: 50/60 Hz Power: 600 W Serial number: 45/21968 with film cutter adjustable sealing time electromagnetic closing/holding function The device is in used condition with corresponding signs of wear, see photos. The device has been tested and is functioning perfectly. Sealing, magnetic function, and cutter are working. Psdpfxezuvl Ae Aphegr Wear parts or replacement parts are still available from the manufacturer if necessary – making it also interesting for continued professional use.

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Podpey Nnakofx Aphogr

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Psdpswtg Hwofx Aphjgr

Condition: ready for operation (used), Path width: 1600mm, processing position: 50mm-1500mm, processing heads: 10x longitudinal scribes, longitudinal scribe line width: 50µm-100µm, laser power per head: under 40W. Laser head L400: wavelength: 10.6µm, output power: 400W, power stability: +/-2%. Machine dimensions X/Y/Z: approx. 3000mm/4500mm/4000mm, weight: approx. 5000kg. Including cooling unit PC 080 and supply cabinet. Retrofitting with 4x cross scoring is possible. Documentation available. On-site inspection is possible. Psdjulzk Eepfx Aphogr

Year of construction: 1999, condition: used, Equipment • main product feeder • 10 supplement feeder Psdpfx Apjbngf Sohogr • 2x compensating stacker CN 20

Condition: used, Maximum dimensions: 450 x 500 x 35 mm Pgsdpfxjbqc Dwe Apher Standard equipment

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Size: max 500 x 500 mm min 200 x 120 mm Packet height: max 500 mm min 50 mm Width of film: max 600 mm Diameter of film reel: max 300 mm Film thickness: 12 - 100 mµ Speed: max 1560 c/h Power requirements: 4,5 kW (220/380V, 50Hz) Width: 1000 mm Depth: 1230 mm Height: 2065 mm Weight: 500 kg (approx.) Equipment: Pgodod N D Ncopfx Aphjr • shrink tunnel 6217 • transport belt 6214 and shuttle worth 6264

Condition: good (used), Built in 1996 Pgodpfxsd Tnh Ie Aphjr

Year of construction: 1998, condition: used, 420 x 300 mm 18,000 units/hour Main product infeed Vacuum opening station 1 tandem product attachment station 2 product attachment infeeds Pgedpjbngfgsfx Apher 1 tandem product attachment station

Condition: ready for operation (used), Rebuilt 2016 Size (mm):: 200 x 420 Podpfx Aedykhpephsgr

Year of construction: 2004, condition: ready for operation (used), Built in: 2004 Format range width: 200-420 mm Length: 200-420 mm Pedpfx Aed N S Adsphegr Height: 30-400 mm Speed: bundles/min 25 Pakete/min Width of film: max 550 mm Film thickness: 12-80 mµ Diameter of film reel: max 350 mm

Year of construction: 2000, condition: good (used), Built in 2000 Psdpfxeg Du A Hs Aphsgr Film wrapping machine max speed: 20 bundles/min max products width: 200-420 mm max products length: 200-420 mm max products height: 50-400 mm Operation: from left or right Electrical: 400 VAC, 3 Ph, N+PE, 50 Hz, 2,5 kW Dimensions (L x W x H): appr. 1100 x 950 x 2100 mm Weight: ~550 kg Packaging material: PE flat film, reel width 500 mm, thickness 12-80 µm, film reel diameter max 350 mm"