Used Boehringer Dus 560 Ti for sale (97)

Condition: ready for operation (used), Swing over bed 570mm Psdpsfmd Dhjfx Airjrc Distance between centers 1800mm Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm MARCELS MASCHINEN CH

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 Podpfxez Hmwks Airsrc power capacity - main spindel 53 kW spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 11 t dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Must move in short time

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Pedpfjz Rnrrsx Airsrc Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: used, Year of construction: 2002, turning diameter 290 mm turning length 850 mm swing diameter over bed slide 600 mm Control Siemens SINUMERIK 840D total power requirement 58 kW Automation: Portal with 2 belts Number of turrets: 3 Spindle: Yes # Stepping wheel: No X-axis (transverse) travel: approx. 220 mm Z-axis (longitudinal) travel: approx. 950 mm Feed rate: approx. 25 m/min (x/y) Rapid traverse: approx. 25 m/min Pedjzrzxcopfx Airjrc

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm Prsdpezw D I Refx Airjc X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: used, BOEHRINGER / VDF NV 250 T is a CNC vertical turning machine designed for precision machining, high accuracy and reliability. Total axes 4; spindle hole 65 mm; travels Z 260 mm, X 760 mm, Y ±50 mm; rapid traverse X 120 m/min, Z 40 m/min; turret 12 positions VDI 40/DIN 69880. Spindle head A6; stepless up to 4500 t/min; spindle power 31 kW; voltage 50 Hz 3x 400 V; machine weight approx. 8500 kg. Equipment: 3-jaw chuck Ø250 mm with automatic centering, lamp, coolant system, oil mist extractor, automatic loading/unloading unit. Achieves tight tolerances; typical for automotive, aerospace, medical and machine tool sectors Pjdpe Adzhljfx Airjrc

Condition: good (used), Control system: Siemens 840 D Turning diameter: 290 mm Turning length: 850 mm Distance between centers: 600 mm Spindle bore: 103 mm Spindle speed: 3,000 rpm Driven tool speed: 3,000 rpm Chip conveyor Weight: 11,000 kg Predpe Afacdofx Airsc

Condition: excellent (used), Year of construction: 1985, Control: Philips B2T Swinging diameter: 640 mm Machining diameter, longitudinal: 550 mm Machining diameter on the turret: 450 mm Turning length: 1000 mm Spindle speed: 2,240 rpm Psdpfx As Adl N Tsirjrc Spindle bore: 103 mm 12-position turret, VDI 60 Chip conveyor

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Gap, bed and gap piece: Pedpfjup A Rzex Airjrc - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Condition: good (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 3,000 mm, total length: 4,000 mm, overall weight: 8,000 kg, The machine is coming from maintenance and is accompanied by a large amount of accessories. Prodpfx Aijz Iif Horec

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t Prjdpfszrzxiox Airoc dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Powered tools: possible depending on equipment Tailstock: optional, often NC-controlled (SK30)

Condition: excellent (used), Year of construction: 2002, VDF BOEHRINGER NG 180-2 CNC Lathe / Turning Center Year of manufacture: 2002 Machine No.: 1130.2601-30 Country of manufacture: Germany Control: Siemens SINUMERIK 840D Drive system: Siemens SIMODRIVE 611 Technical Data Turning diameter: 290 mm Turning length / distance between centers: approx. 850–900 mm Swing diameter over bed: 600 mm Spindle bore: 80 mm Main spindle speed: 10–4,000 rpm Main spindle drive: Direct drive, suitable for CBN hard turning Spindle drive power at 40% ED: 56 kW Maximum spindle torque at 40% ED: 605 Nm Tool turret: 12 positions Number of turrets: 1 Driven/live tool capability: 12 stations Tool holders: Included / fitted as shown Main spindle chuck: 3-jaw Autoblok chuck The machine is equipped with a second spindle / counter-spindle arrangement, visible on the right-hand side of the working area, together with workpiece support/handling equipment. The photographs also show additional machining/tooling positions around the turret. Electrical Data Supply voltage: 400 V Podpfszvfhisx Airjrc Phases: 3 AC Frequency: 50 Hz Main fuse rating: 125 A Rated current indicated on machine: 100 A Machine Dimensions and Weight Length: approx. 5,949 mm Width: approx. 2,300 mm Height: approx. 2,230 mm Machine weight: approx. 10,000 kg Machine: VDF BOEHRINGER NG 180-2 Year: 2002 Serial No.: 1130.2601-30 Control: Siemens SINUMERIK Max. turning diameter: 290 mm Turning length: approx. 850–900 mm Spindle bore: 80 mm Spindle speed: 10–4,000 rpm Spindle power: 56 kW Turret: 12 positions Dimensions: approx. 5,949 × 2,300 × 2,230 mm Weight: approx. 10,000 kg

Condition: used, Year of construction: 2000, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 290 mm Control Siemens 840D Turning length: 850 mm Rotation diameter over table: 600 mm x-axis: 220 mm Prodpfx Aieydfpdjroc z-axis: 950 mm Control: Siemens 840D Speeds: 0-4500 rpm Tool revolver: 2 pieces Spindle bore: 65 mm Rotation diameter: 290 mm Feed rate x/y: 25 m/min Rapid traverse x/z: 25 m/min Working height: 1200 mm

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck diameter: 500 mm Pedpfezzp Auox Airjrc Technical Specification Driven Tools Yes Counter Spindle No

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm Prjdoy Tyyqopfx Airec spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: used, Max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, manufacturer: SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest, and Multifix steel tool holder. Pjdpfx Aoz Nhrcsirerc

Year of construction: 1991, condition: used, Offered for sale is a robust universal CNC lathe. Turning length: 3000mm, max. torque: 2240Nm, spindle speed range: 16-2500rpm, feed rate: 0.001-9999.999mm/min, rapid traverse rate: 10000mm/min, feed force: 15kN, tailstock quill force: max. 15kN, control: FANUC 15 TF. Equipped with hydraulic tailstock, drum turret, steady rest (range 72-220mm and 28-120mm), various spare parts, defects: machine bed worn, X-axis bearing arrangement makes noise. Weight: approx. 8500kg, overall dimensions X/Y/Z: approx. 6500mm/2200mm/2000mm. Inspection possible by appointment. Prsdpfxezzdx Rj Airoc

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 70.1025.002302, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 485 mm, center height: 232 mm, center width: 360 mm, turning length: 1,600 mm, total length: 3,350 mm, total width: 1,100 mm, total height: 1,400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 11 rpm, overall weight: 2,500 kg, workpiece weight (max.): 500 kg, Offered for sale is a VDF 48S Boehringer lead and feed screw lathe with accessories in good condition. Manufacturer: VDF Boehringer Göppingen Model: 48S Machine no.: 70.1025.002302 Year of manufacture: approx. 1972 Pedpfx Asx Nqkljirerc Centre height: 232 mm Centre distance: 1600 mm Swing over bed: 485 mm Swing over cross slide: 280 mm Spindle bore: 52 mm Spindle speeds: 11.2 - 2240 rpm Total power requirement: 7.5 kW Machine dimensions (L x W x H): approx. 3.35 x 1.10 x 1.40 m Weight: approx. 2,500 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck Prjdpfx Aiowwkx Esroc  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: good (used), Year of construction: 1978, turning diameter over cross slide: 430 mm, spindle bore: 82 mm, turning diameter: 640 mm, center height: 320 mm, center width: 3,000 mm, quill stroke: 250 mm, total length: 5,600 mm, total width: 1,300 mm, total height: 1,900 mm, swing diameter over cross slide: 430 mm, bed width: 430 mm, Turning diameter in gap: 850 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 9 rpm, Conventional lathe, center high 320 mm, between centers 3000 mm, bore Ø 82 mm, 27 speeds 9 - 1800 rpm, motor 18,5 kw, nose DIN', dimensions 560x130x190 cm, weight ca. 5000 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck FORKART Ø 400 mm, tool post RAPID with toolholders, steady and following rest with roller pin Prsdozin Niopfx Airec

Condition: used, Year of construction: 1983, Boehringer DUE 500 Guide and Lead Screw Lathe Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: 1983 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled and underwent a comprehensive functional test. The machine geometry was inspected and adjusted. A test protocol according to DIN 8605 is available. As part of the work, the wedge strips were also adjusted, and the coolant pump was overhauled. Technical data: Center height: 250 mm Psdpfx Aoz A Tt Dsirorc Distance between centers: 1300 mm Spindle bore: 62 mm Chuck diameter: 300 mm Spindle speed: 2240 min-1 Motor power: 11 kW Approximate footprint: 4000 x 1525 mm Approximate weight: 4300 kg Equipment: 3-axis digital display, NEW Coolant system Chuck guard with microswitch Emergency stop Roller cover Machine light Geometric protocol Inquiry item: Transportation costs will be provided in a separate quote.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Used CNC lathe Manufacturer: Böhringer Model: NG 180 Year of manufacture: 2004 Equipment: includes steady rest Prjdpfx Ajz Ant Uoirec

Condition: used, Year of construction: 2004, machine/vehicle number: 1130.2623-31, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a CNC lathe manufactured by VDF Boehringer, model: NG 180-2. Pedpfxjzy Ukus Airorc TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Type of current: AC Frequency: 50 Hz

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used CNC turning machine Manufacturer: Böhringer Type: VDF 250 Cm Year of manufacture: 1997 Prjdpfxoz Anv No Airsc with accessories.

Year of construction: 1985, condition: used, Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026. Prsdpfxjz Agfpj Airjc