Used Boiler Tube for sale (2,563)

Condition: used, color: red, overall weight: 7,000 kg, maximum load weight: 5,990 kg, empty load weight: 1,010 kg, loading space volume: 5 m³, loading space width: 2,150 mm, loading space length: 4,500 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 08/2018, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tilting platform. Gjdpey Spx Tefx Ap Djbu Body: City skip loader with a drive-over tilting platform, approx. 5 m³ lower container. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, Year of construction: 1999, color: red, loading space volume: 5 m³, loading space width: 2,150 mm, loading space length: 4,500 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tailgate Body: City roll-off container with a drive-over tailgate, approx. 5 m³, year of manufacture unknown as no nameplate is available. Accessories for the upper container: information provided without guarantee, subject to changes, prior sale and errors. Gbodpfoy Spydjx Ap Deu

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes - Bends up to 90° can be created Gedjxaac Nepfx Ap Dsbu Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning. Gsdpfxozp Rmqs Ap Dobu

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Gbodpfxsxcxups Ap Dou

Condition: used, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 0872101270802, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser hours: 6,000 h, laser power: 3 W, pipe diameter (max.): 152 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 23 kg, type of cooling: water, overall weight: 23,900 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Model: ADIGE / BLM GROUP LT7 Gjdpfx Apezzzb Ao Dsbu Machine Type: Automatic 3D fiber laser tube/profile cutting machine Laser Source: Fiber laser Laser Power: 3kW Cutting Diameter: Ø12 – Ø152.4 mm 3D Cutting Head: BLM GROUP 3D Tube Cutter Max. Profile/Bar Weight: 23 kg/m Minimum Loadable Length: 1900 mm Max. Loadable Length: 6500 mm Automatic Loading: Yes Bundle Loading: Yes Single Profile/Bar Loading: Yes Max. Bundle Loading Capacity: 5,000 kg Automatic Unloading: Yes Unloading Position: 3 programmable positions Unloading Length: 6500 mm Processable Materials: Carbon steel, stainless steel, aluminum, copper, brass Standard Configuration: 6500 mm loading + 6500 mm unloading Machine Weight: Approximately 23,900 kg (including fume extraction system) Average Power Consumption – O₂: 15 kW Average Power Consumption – N₂: 20 kW

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Gbedpfxehwrhmj Ap Dou Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2017, 533 USED Heuft VTR thermal oil rack ovens for buns and bread. WYPOSAŻENIE - 2 Heuft VTR 08.19.0.08 trolley ovens (capacity: 3 trolleys, 8 levels, trolleys dimensions 60x80 cm) - heating boiler - 12 trolleys TECHNICAL DATA: - year of production: 2017 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Gbodpfjz Dbnxsx Ap Dou Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, rack ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: Godpez Atdrefx Ap Dobu * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.

Condition: used, Year of construction: 1991, machine/vehicle number: 40256654, pressure: 17 bar, power: 7,000 kW (9,517.34 HP), operating pressure: 17 bar, total height: 3,500 mm, total length: 9,000 mm, total width: 3,500 mm, type of input current: three-phase, Steam boiler in operation until 2025, 2 burners available: 1 burner for gas only and 1 dual-fuel burner that can switch between gas and fuel oil. Gsdpfsyrcz Tsx Ap Djbu

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section Gbjdpsy Uhxksfx Ap Dsu - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: used, Technical details: revolution per minute: Motor: 1430 U/min voltage: 380 V / Hz weight: 125 / Gerät kg dimensions: L:680 x B:850 x H:750 mm 2 pieces RADAX high pressure tube fan for dusty air mixture 3-Ph; IE3 06717 external control motor ADDA drive technology, IP55 Ø of the ventlator 650mm 2x flange with 16 holes -hole circle Ø 700mm Godpfeu Nww Djx Ap Dsbu *

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Gbodou Nxatspfx Ap Dou Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 Gbjdpou Ibyysfx Ap Dou tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Year of construction: 2004, condition: excellent (used), Type: HRA4/80-4 Pipes: Ø 6 ÷ 24 mm, wall thickness = 1 ÷ 2,5 mm • Point: Ø3 ÷ 12 mm Gbodjhmfh Hjpfx Ap Dou

Condition: reconditioned (used), Title:RHOSS TCHVBZ 2630 – 621 kW Water-Cooled Chiller | Bitzer Screw | Refurbished Headline: Industrial-grade Rhoss water-cooled chiller, fully refurbished and field-tested. Equipped with 2× Bitzer screw compressors, Carel Smart Controller, and energy-efficient R-134a refrigerant — engineered for demanding industrial cooling applications. TECHNICAL SPECIFICATIONS Specification Value Brand / Model RHOSS TCHVBZ 2630 Type Water-Cooled Chiller Condition Refurbished / Tested Cooling Capacity 621.6 kW (534,500 Kcal/h) Refrigerant R-134a Compressors 2 × Bitzer Screw CSH8581-125Y-40P Evaporator Shell & Tube – DN150 Connection Condenser Shell & Tube – DN125 Connection Control System Carel Smart Controller Dimensions (mm) 4070 × 1300 × 1960 Weight 3,297 kg Location Seyhan / Adana, Türkiye TECHNICAL OVERVIEW Industrial-grade Rhoss water-cooled chiller — fully refurbished, field-tested, and verified to meet international performance standards. Equipped with high-efficiency Bitzer screw compressors and a Carel Smart Controller for stable, energy-efficient, and long-term operation. Optimized for demanding industrial applications where reliability and uptime are critical. WHY CHOOSE THIS UNIT Fully refurbished and performance-tested Equipped with high-efficiency Bitzer screw compressors Gbodpfxey Umf Nj Ap Dou Reliable and durable for continuous industrial operation Energy-efficient R-134a refrigerant Backed by professional after-sales service and spare parts inventory Fast commissioning and on-site technical consultation available ABOUT ÖZSAYIN COOLING SYSTEMS With more than 40 years of experience in industrial refrigeration, Özsayın Cooling Systems provides complete turnkey solutions: Supply of new or refurbished chillers (10 – 2,500 kW) Short- and long-term rental options On-site installation, commissioning, and maintenance Extensive spare parts inventory for global brands (Carrier, Trane, Daikin, York, Bitzer, Rhoss, Climaveneta, McQuay, etc.) 24/7 technical service and engineering consultancy RENTAL OPTION AVAILABLE This unit is available for short- or long-term rental under flexible terms. Contact us for a customized quotation and technical consultation tailored to your project requirements. CONTACT Mr. Samet Özsayın – Özsayın HVAC Technologies Seyhan / Adana, Türkiye Last Updated: 26.08.2025 HASHTAGS / KEYWORDS #ozsayin #bitzer #rhoss #watercooledchiller #industrialchiller #r134a #coolingsolutions #hvacturkey #chillerrental #refurbishedchiller #screwcompressor #carelcontroller

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: K990424, type of input current: three-phase, type of cooling: air, overall weight: 600 kg, total length: 15,000 mm, total width: 10,000 mm, total height: 2,000 mm, Equipment: CE marking, documentation/manual, emergency stop, Laser Bystronic BTL 4020 – Professional sheet metal cutting equipment Fortza.ro is offering for sale a Bystronic BTL 4020 laser, professional equipment designed for sheet metal cutting, with a cutting capacity of up to 15 mm thickness. The machine also offers the possibility of cutting tubes with a diameter of up to 140 mm, as well as an automatic sheet loading system, to streamline the work process. Condition: Functional Manufacturer: Bystronic Laser AG, CH-3362 Niederönz, Switzerland Model: BTL 4020 Year of manufacture: 2018 Order number (Job No.): K990424 Equipment number (Machine No.): 1214 Gedsz H Uihopfx Ap Dsbu Country of origin: Switzerland Technical specifications Maximum sheet metal cutting thickness: 15 mm Maximum diameter for tube cutting: 140 mm Automatic sheet loading: Yes Power supply: 3 × 400 V, three-phase Frequency: 50 Hz Electrical power: 80 kW Maximum current: 125 A Maximum current of the largest consumer: 63 A Marking: CE – complies with European standards Total weight: 600 kg

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Gbsdjw Sfptspfx Ap Dsu

Condition: good (used), Year of construction: 2006, Berg & Schmid Xtech 410 CNC sawing machine Year of manufacture: 2006 Control: - CNC control, freely programmable Cutting range: - Round: 410 mm - Flat: 410 mm - Dimensions: approx. 3,500 × 2,000 × 2,200 mm - Working height: 730 mm Cutting speed: - 12–110 m/min Equipment: Gbodpfez Ii T Dex Ap Deu - Material feed via precision ball screw and linear guide - Hydraulic saw blade tensioning - Automatic double-sided saw blade free-travel device - Hydraulically driven chip conveyor - Clamping pressure adjustment for thin-walled tubes and profiles - Frequency-controlled saw drive, stepless - Infeed automation for the first cut - Blade tracking system Saw drive: - 5.5 kW

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 35220, pressure: 10 bar, nominal heat output: 5,057 kW (6,875.60 HP), Used high-pressure steam boiler - Steam output: 7,000 kg/h Gsdpfx Ajy Ukcrop Djbu - Economizer - Mixing cooler - Dual-fuel burner: Weishaupt WM-GL-50 (including sound insulation hood) - Double pump station: Grundfos CR10-12 - Oil suction unit - Standby operation (72 hours) - All necessary fittings are included - If interested: steam accumulator 25 m³ Boiler and accumulator have been dry-stored since 2024. Control system can still be tested. Excluding dismantling (EXW). Documents, photos, and information (TÜV inspection, burner maintenance, etc.) available upon request.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Boiling kettle Brand Bastra Model B110-3 Year of production 2010 Capacity 300l Power 22kW Voltage 230V 50Hz Internal dimensions: 900x800x420mm External dimensions: 1100x1350x1100mm Gedev Urr Nopfx Ap Dsbu

Condition: used, Year of construction: 2021, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process Gsdpfx Apsz Nia Us Debu - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: used, all stainless steel water circulation net belt length 10.000 mm net belt width 1.400 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.000 x 2.100 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Gsdpfx Apsz Nxgde Dobu Conveyor belt with flights belt width: 1.200 mm distance between flights: 200 mm height of flights: 85 mm

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves Gjdpjzlbpbjfx Ap Djbu high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L Gbedpfxsz Nz T Hs Ap Dju • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Technical Specification Counter Spindle Yes Driven Tools No