Used Bottle Inspector for sale (1,408)

Condition: used, Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through: – traditional commands (push button panel) – PC hardware (video, keyboard and mouse) Traditional commands In order to allow quick and safe intervention by the operator, the controls have been provided of a traditional type; for example: – machine stop – machine running – etc. PC hardware The machine is equipped with the main hardware elements of the PC, such as: – video – keyboard – mouse Podpfx Aajvguytohorc Ambient temperature In order not to jeopardize the safety and optimal operation of the machine, follow the values ​​indicated: – storage temperature: from -10 to 60 ° C – ambient operating temperature from 10 to 45 ° C – temperature inside panels: Power electrical cabinet: – electrical power cabinet temperature: t.MAX. <45 ° C obtained with a ventilated cabinet. Vibrations The machine was designed and built in compliance with the directives in force and with the permitted level of vibrations. MANUAL AND ELECTRIC DIAGRAM AVAILABLE.

Condition: used, Year of construction: 2007, Overview The bottle washer was previously used in a brewery in Germany. Due to the good and continous maintenance the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is still installed and in production. As the line speed needs to be increased, this machine is replaced, even though it is in great shape. Tech Specs: Rated Capacity: 13,000 bph (based on 1.0L mineral water bottles, format: 89 x 310 mm, weight: 600g) Total number bottle cells: 3,240 pcs Cells per basket row: 18 pcs Cell pitch: 110 mm Chain pitch: 169 mm Treatment Times total processing time: 14.95 minutes total immersion time: 7.56 minutes caustic immersion time: 6.73 minutes caustic filling time: 7.73 minutes caustic contact time: 7.89 minutes total internal spraying time: 70 seconds total external spraying time: 25 seconds Dimensions Housing (L x W x H): 8,530 x 2,300 x 2,990 mm Total dimensions (L x W x H): 8,880 x 4,200 x 3,330 mm CE certified Chemical Dosing Pumps Machine data sheet included Rotating Spray nozzles Single End Machine Label discharge rear left Label press included Finger discharge + finger infeed Bottle cells made of plastic Full machine body in SST Vapor discharge Prodpfx Aasxbr Slshsc

Condition: used, Non-returnable PET filling line, consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in 4x5 arrangement) - PET shredder (Strautmann BrikPress 240, year of construction 2019) - Crate washer with cleaning nozzles - Preform feeding device - Stretch blow-moulding machine (SIPA, type SFR 8 EVO, with 8 cavities) - Stretch blow-moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Premix system (Procomac Starmix, built in 2001, 200 hl/h) consisting of water deaeration, mixer and carbonisation with a total of 4 tanks and two cartridge filters for water treatment. - Velcorin dosage (dmt, Burdomat II G) - Capping task and cap conveying system - PET bottle rinser, filler and capper (Procomac) - Fill level control (Heuft Spectrum TX) with rejection - Labelling machine (P.E. Futura) for hotmelt labelling of wrap-around labels, in a block with dating (Videojet) - Crate packer (BMS) - Free, driven conveyor lines for bottles and crates Additional title: non-returnable PET filling Capacity: 16000 bo/h Formats: 0.5 litre disposable PET bottles, 20-bottle crates Pjdjw Uvd Tspfx Aahjrc Features: Bottle ejector, crate washer, shredder, preform feeder, 2 x stretch blow moulder, premixer, velcorindosage, cap feeding and conveying, rinser/filler/capper, fill level control, labeller, dating, packer, Free crate and bottle transport

Condition: excellent (used), Collective lot comprising of: Prsdsxnc Epepfx Aahoc - Fillber Monoblock RVOL.TVP 32-8 OMS Filler/Capping System (With Cap Changeover) With Siemens PLC - Posimat Master-15 bottle Unscrambler, SMF Dumper DRH 310 With Posimat Loading Elevator - SMIPACK XP650 ARX-VS Overlap Shrink Wrapping Machine with FLXMOD Control System - Epackaging Saturno 1T High Speed Labelling System - ASMECH BESPOKE CONVEYOR SYSTEM With Travelator & Bottle Sorting Unit

Condition: used, New: Yes Empty weight: 7 kg Part suitable for: trucks 12 ton - capaciteit = 12 ton - min. hoogte = 230mm - max. hoogte = 465mm Prodpfx Aajxhvqxohoc - hefhoogte = 155mm - verstelbare hoogte = 60mm Article nr.: BJ12H-veiling Bottle jack 12 ton

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h Predpexlm Nysfx Aahoc calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: used, Year of construction: 2007, Used Inspector Filtec 2007 This is a used inspector manufactured by Filmtec in 2007 of the modell Omnivision 1. It is able to inspect up to 45,000 bottles an hour. The bottle formats that it is capable of inspecting are: – 0.33L and 0.5 L Bottles upside down – 0.33 L Steinie – 0.5 L NRW All the safeguards and manuals of this used inspector are available. The maintenance documentation is available as well. The machine is currently ready for operation. It processes beer in glass bottles. Type of inspection performed: CCD – Camera Prjdpfxsvgur Ao Aahoc PLC type: DSP (Digital Signal Processing) Some spare parts are also available.

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Predpfxsxfbczs Aahoc

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labeling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labeling stations - bottle transport Additional title: years of manufacture: 1975 - 1979 Capacity: 9000 bo/h Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle transport Prodpfx Aow Tmt Asahec

Condition: good (used), Crane block, crane hook, load hook, single hook, bottom block -Crane block: Crane hook load capacity t -Rope groove: see photos -Dimensions: 420/170/90 mm -Own weight: 6.3 kg Predpfx Aajw Tin Ashoc

Condition: used, Electronic scanning for checking the lid deflection. A special sensor is fitted above the flow of bottles or cans in free flow and measurement begins after the trigger light barrier has been passed. The sensor is continuously scanned according to the measuring cycle. Faulty caps are detected and ejected on the basis of the cap deflection. Additional title: with discharge Performance: 90000 objects/h Prsdpfjw Tmpkex Aahjc Max. speed conveyor: 1,72 m/s Ambient temperature: 60 °C Power: 25 W Current: 230V AC Operation / Control: Control unit with keypad and digital display Features: Light barrier, scanning sensor, discharge BBull Soft-Push

Condition: used, Year of construction: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydraulically controlled bottle carrier and pressed against the sealing cone on the filling valve. The valve sleeve moves as far as it will go in the valve body, opening the product outlet. The air inside the bottles is discharged through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the product level in the container. The product flows into the bottles by gravity until the fill level reaches the air tube. The bottle is then lowered and the product outlet is closed. Additional title: hot filling Capacity of filling line: 5000 bo/h Number of filling valves: 24 pcs Length: 1,64 m Width: 1,20 m Height: 2,10 m Podpfx Asw Tmmveaherc Formats: Round bottles, diameter 60 - 92 mm, height 100 - 265 mm Running direction: left -> right Features: 24 filling valves from stainless steel, height adjustment, vacuum blower

Condition: used, Hot spraying of the empty bottles from below using nozzles on a 3 metre long cleaning section for pre-rinsing and to reach the filling temperature. Overturning of the bottles at the inlet and outlet of the machine. Equipped with water tank, heater and circulation pump. With dosing connections for water treatment. Additional title: bottle spraying with heatable water tank Capacity of filling line: 5000 bo/h Length of cleaning line: 3 m Features: bottle turners; water tank with heater, circulation pump and dosing connections Prodpsw Tmmpjfx Aahsc

Condition: used, Year of construction: 2009, Bottle carrier opener for 4- and 6-bottle cartons Manufacturer: DOKU-Consult Model: FTA-6/4-Z1 Year of manufacture: 2009 Additional title: Machine for unfolding carton carriers Performance approx.: 70 Carrier/min. Formats: 2x2 and 2x3 for 0.5l NRW bottle, 0.33l ale bottle or 0.33l Vichy bottle Prodjw Tmi Dopfx Aahjc Running direction: left -> right Operation / Control: Siemens S7-300 Position: free standing Base construction: Aluminum profile frame construction, on spherical feet, with viewing windows all round Features: 2 carton magazines, 2 unfolding units, operating platform with stairway/railing, double conveyor belts

Condition: used, Bottling line with a capacity of 30,000 bph. 0.33 litre Vichy, 0.33 litre Euro and 0.5 litre NRW non-returnable bottles can be used. The line consists of the following machines/components: - New glass unscrambler Manufacturer: Steinle Fördertechnik - Beer preheater Manufacturer: Fischer - Bottle filler Manufacturer: Krones - Crown cork filling hopper with transport Manufacturer: Gassner - Bottle level control Manufacturer: Metec - Labeller Manufacturer: Krones/Renner - Labelling control Manufacturer: Miho - Bottle carrier labeller Manufacturer: DOKU-Consult Capacity: 30000 bottles/h Formats: 0,33l Vichy, 0,33l Euro and 0,5l NRW Psdpfjw Tmhajx Aahjrc Operation / Control: mainly Siemens S7 Position: free standing Features: New glass clearer; beer preheater; bottle filler; crown cap filling bunker with magnetic transport; bottle level control; labeler; label control; packer; full crate control; palletizing system Layer patterns: 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Pjdpfx Aajw Tbgdehjrc Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: used, Glass bottle filling line consisting of the following components: 1. Bottle washing machine (separate unit, Silmo, 1982) with a nominal capacity of 2,880 bottles/hour 2. Rinsing, filling, capping and labelling line (IC Filling Systems, 2020) with: - Bottle feed table - Rinser - Counterpressure filler - Capping machine - Bottle exterior washer - Cold glue labelling machine - Bottle discharge table - Free bottle transport Capacity appr.: 1100 bo/h referring to 0,33 l bottles Length: appr. 7 m Width: appr. 4 m Prjdpfx Aasw Ta Ndohec Formats: Euro 0.5 l and 0.33 l; crown caps; wrap-around labels and belly labels Running direction: clockwise Base construction: Rinser, filler and capper as a monobloc Features: Bottle cleaning machine, bottle feeding table, rinser, filler, capper, bottle exterior washer, labeller, bottle discharge table, beer pump

Condition: used, Year of construction: 2000, Conveyor belts for glass bottles, with 2 unpressurised converging conveyors Transport with 1, 3 or 4 conveyor belts Capacity: 30,000 bottles/h Manufacturer: Krones Year of construction: 2000 Additional title: free container conveyors Capacity approx.: 33000 Bottles/h Free bottle transport approx.: 115 m 90° Bottle transport curves: 10 pc. Prjdpfx Aew Ta Hcjahjc Conveyor belt widths: 4 conveyor belts Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-400 / S7-300 Material: Mainly stainless steel Position: free standing Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switching devices, 2 pressureless bottle mergers (17/9/7/5/3/1 and 12/7/3/1 conveyor belts), automatic belt lubrication

Condition: used, Year of construction: 2000, Bottle filler Manufacturer: Krones Short tube filler with double pre-evacuation Model: Mecafill VKVP 084-094 Year of manufacture: 2000 The capper runs with twist-off and standard crown corks Additional title: Filling and Capping machine Capacity: 30000 Bottles/h Length: 7000 mm Width: 4500 mm Height: 3800 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Machine partitioning: 84 filling valves, 12 cappers Running direction: right -> left Operation / Control: Simatic Material: mostly stainless steel Position: free standing Base construction: Square frame construction on domes Features: 1 capper for standard and twist off crown caps, 84 filling valves, 12 cappers, protective housing with glass doors, vacuum pump Periphery: Crown cap feed, fill level control, Pjdpsw Tay Ajfx Aahsrc

Year of construction: 2000, condition: used, Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h Additional title: Bottle washing machine Capacity: 39000 Bottles/h Length: 12700 mm Width: 4700 mm Height: 3500 mm Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-300 Position: free standing Base construction: Single-end machine, self-supporting housing on dome feet Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station Layer patterns: 22 bottles per basket row Psdpfx Ajw Taxfjahorc

Condition: used, Year of construction: 2013, Fill level and closure control after the filler Additional title: Full bottle control Capacity: 60000 bottles/h Bottle diameter: 80 mm Bottle height: 280 mm Prodpfx Aasw Tatvshec Closure diameter: 28 mm Voltage: 230 V Formats: 0.33 l glass bottles, 0.5 l glass bottles Machine partitioning: 120 mm Running direction: right -> left Operation / Control: TFT colour terminal with touchscreen control, HEUFT PILOT-Terminal software Material: Device housing made of plastic and powder-coated aluminum, housing mast made of stainless steel for floor installation Position: free-standing Base construction: Housing mast with electronic cabinet Features: Traffic light, positive air (for improved dust protection), 5 type licenses, level detection with temperature compensation, optical closure presence control, fault container discharge with monitoring, licenses for data acquisition and remote service

Condition: used, Year of construction: 1996, Glass bottle filler and capper Additional title: Filling and capping machine Psdpfx Aew Taq Uoahsrc Capacity with 0,33 l: 33000 bottles/h bottom-fermented beer at 6°C, soft drink at 12°C Capacity with 0,5 l: 26000 bottles/h wheat beer at 6°C Performance screw cap: 25000 bottles/h Water: 5 bar Compressed air: 5 bar Width: 3838 mm Height: 3900 mm Weight: 4000 kg Formats: 0.5 l Euro, 0.5 l NRW, 0.33 l Vichy, 0.33l Ale bottles, twist-off crown cap, one-piece screw cap Machine partitioning: part circle diameter 2520 mm, 77 filling valves, valve pitch 102 mm Running direction: right -> left Operation / Control: On-site control box, Simatic S 7 Material: mainly stainless steel Position: free-standing Base construction: Square frame construction on domes Features: Crown cork sealer with feed container, screw cap sealer with feed container, filling vessel height adjustment, front panel, hot water overflow, automatic shard spraying, bottle stop device, level control, centering tulips, KHS operating terminal with TFT color monitor, 2 sets of format parts for filler and sealer, bottle shower, inlet and outlet conveyor control, automatic central lubrication, vacuum pump Periphery: Crown cork feed, screw cap feed Layer patterns: Bottle diameter 45 - 90 mm, bottle height 130 - 350 mm

Year of construction: 2016, condition: used, Bottle washer for 7000 bottles/h Additional title: Single-ended machine Nominal output: 7000 Bo/h Cycle time: 22 min. Heat up heat consumption: 1785400 kJ/h Heat consumption operation: 455000 kJ/h Power: 29,5 kW Current: 63 A Voltage: 230 / 400 V Frequency: 50 Hz Water: 3 bar, 2,5 m³/h Compressed air: 6 bar, 40 l/min. Pjdpfew Tam Nex Aaherc Length: 8,81 m Width: 3,46 m Height: 2,8 m Weight: 13000 kg Formats: 0,5 l Euro Operation / Control: PLC control, operating console Material: stainless steel Position: free standing Base construction: Self-supporting housing on adjustable feet Features: PLC control, gearbox, pumps, heat exchanger, label discharge, Layer patterns: 20 bottles/row, 132 rows

Condition: used, Year of construction: 1990, Bottle filler for approx. 8000 bottles/h Pjdpow S T H Tjfx Aahorc Additional title: Filling and capping machine Capacity approx.: 8000 bottles/h Formats: 0.5 l Euro bottle, 0.33 l longneck bottle, 0.5 l goiter neck bottle Position: free standing Features: 1 pre-evacuation, short tube filling, crown cork capper

Condition: used, Bottling line for approx. 5000 bottles/h Additional title: years of manufacture: 1990 - 2016 Prsdpfx Asw S Tqfeahjc Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Features: Empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) Bottle filler and capper (Hormes), swing stopper capper (AMS, 1997, 15 capping units, 6,000 bph), Labeling machine (Gernep, 2014, 9000 bph), bottle transport