Used Bottle Cleaning Machine for sale (84,800)

Year of construction: 1993, condition: used, Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph Additional title: Single-ended machine Gedpjvcqgzofx Ah Hstt Capacity: 21000 bo/h Bottles each row: 16 bo/row Length: 8,64 m Width: 4,47 m Height: 1,92 m Weight: 17900 kg Formats: 0,5 l NRW-Bottle Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank Periphery: S5 controll (HMI Lauer)

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Gtjdpowb E S Isfx Ah Hot

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Gedpfev S Dihex Ah Hjtt Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Gtodpfxewk D Dzs Ah Hjt The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) - External Module PAM-01 (7m hose extension) Gtodpfx Ahswum Svo Hst - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzvbf01, Equipment: CE marking, Automatic vial bottle filling machine.this machine type normally customized by the customer vial bottle type and requirement of the production .It widely used for the pharmaceuticals and industry. Filling and Capping: The process involves automatic bottle loading, automatic capping, automatic filling, automatic capping, and bottle discharging, all completed without human contact. It employs a peristaltic pump for filling and a servo control system; the equipment's transmission is fully servo-controlled. The capping torque is adjustable. The equipment is equipped with a buffer tank and a weighing function (Mettler-Toledo electronic scale) to control the liquid level by weight. It also features a magnetic stirring function. All parts in contact with materials are made of 316L stainless steel, conforming to GMP standards. Gjdpfox Tg Tqjx Ah Hjtt

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards Gtodpferbf R Tsx Ah Hst - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Voltage: 230/400 Volt Gedjx T Ai Ispfx Ah Hjtt Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Material: Painted mild steel Position: free standing Base construction: Square tube frame Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m

Condition: like new (used), The device is like new and has barely been used! It operates flawlessly. Gtjdpfx Asx Tu Ehsh Hjt

Condition: new, New electric scrubber dryer, floor cleaning machine KREMER type KR-FL50A Year of manufacture 2024 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - No drive, the device is pushed by hand Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Gsdpfovvww Tsx Ah Hott Empty weight 160 kg Good condition

Condition: new, The machine is fully automatic, twelve socket, production of bottles up to 2 / 3 / of PET preforms with a capacity of 1,500 pcs / h. Gsdpfx Ahoiu Hlqs Hott The machine is made in its universal version. It takes up to 4 months to adapt to the respective customer, during which time the blast molds will be made, the compressors and the water cooler will be ordered and delivered, which are not included in the indicated price.

Condition: like new (used), Year of construction: 2018, Danube Industrial Laundry Dryer Gsdpfx Aec Utidjh Hjtt Powerful dryer with condesator for hotels, pensions and large families We also have a suitable washing machine 32 Ah connection TOP CONDITION CAN BE TAKEN IMMEDIATELY IN OPERATION WITH QUESTIONS PLEASE ANNOUNCE VIELLENDAN IN ADVANCE

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. Gtsdpferbid Iex Ah Het - Cleaning the corners of PVC profiles after welding - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles - Fully automatic operation with PLC - 3 different blade attachment possibilities - Automatic case wing profile separation feature - Ability to automatically center and square the profile

Condition: new, functionality: fully functional, power: 3.5 kW (4.76 HP), gearing type: automatic, fuel type: electric, color: original, overall weight: 3,500 kg, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MZatbm01, Equipment: CE marking, This automatic bottle blowing machine that we are introducing to you today, it is a kind of instrumental equipment for plastic bottle production, it can transform plastic granules or pre-made bottle blanks into plastic bottles of various sizes and shapes through an automated process, we can realize any product you make for you. This machine integrates mechanical, electronic and pneumatic technologies and is very intelligent. Whether it is preform loading, heating, stretching, blow molding or finished bottle discharging now only need one of these machines can help you solve, without a lot of human intervention, which not only help you save labor costs, but also help you greatly improve production efficiency and ensure product quality stability. Gedpfoxx Ndgex Ah Hett

Year of construction: 2000, condition: used, functionality: fully functional, machine/vehicle number: 200158, We offer this used MTM RWST 650 cleaning system, year of manufacture 2000. Manufacturer: Meißner Technik Müllenbach GmbH Machine type: RWST 650 Machine no.: 200158 Circuit diagram no.: 200158 Piping diagram: HR.9000:00 Year of manufacture: 2000 Operating voltage: 3/PEN 400 V Gjdpox Sx S Asfx Ah Hstt Frequency: 50 Hz Control voltage: 24 VDC Total connected load: 100 kVA Rated machine current: 153 A Main fuse in supply line: Slow-blow rated current: 200 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Gsdpfx Ajxyk Trjh Hott

Condition: used, DM-01225-PET-Blowing Semi-automatic PET bottle blowing machine Capacity: 1,000 BPH 2 units of blowing machines 1 preform heating tunnel Equipped with 2 x 0.5 L bottle mold Capacity: 1,000 pcs/hour, Cavities: 2 x 2 for 500 ml bottles Air pressure compressor Air dryer Gedpfxox I Rclj Ah Hott Donalcon air filters

Year of construction: 2025, condition: new, A post-lease refurbished unit for regeneration of DPF, FAP, GPF, SCR, EURO5, EURO6, DOC and catalytic converters. The device after a comprehensive overhaul: -new hoses and seals -regenerated turbine and water pump - latest software version -manufacturer's warranty ASK ABOUT AVAILABLE MODELS AND PRICE!!! Gtjdjig H H Ejpfx Ah Hot

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed • CNC control system (2 axes) • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools • Cleaning of upper and lower surfaces for both white and colored profiles • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles • Easy profile programming (handwheel) Godpfx Asrbg Eush Hjtt • Adjustable working speeds to desired levels

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZRLM01, overall weight: 500 kg, total length: 1,750 mm, total width: 800 mm, total height: 1,450 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, space requirement height: 2,000 mm, power: 1.2 kW (1.63 HP), fuel type: electric, Equipment: CE marking, The Automatic Labeling Machine is a sophisticated piece of equipment used in various industries for applying labels to products, containers, packages, or other items. These machines are designed to enhance productivity, accuracy, and efficiency in the labeling process. Gtedpfoxum H Djx Ah Het

Condition: used, engine: 1,3 kW mass: 37 kg Gtjdpot N Akbofx Ah Hot working width: approx. 40 cm The Nilco BA33-33E cleaning machine is a compact, powerful scrubber dryer for the thorough cleaning of hard floors.

Condition: ready for operation (used), Year of construction: 2011, power: 29 kW (39.43 HP), 2 heated tanks of 300 liters, one tank for cleaning and the other for rinsing. oil skimmer is in the cleaning tank the machine is also equipped with suction comes with 2 stainless steel carts. Gjdpstr Dn Tsfx Ah Hjtt Machine is working properly. the diameter of the table is 1000mm, usable height 600 mm

Condition: good (used), Year of construction: 2001, Krones bottle washer, year of manufacture 2001 676-039 6000 bottles/hour, 0.2l-1.0l bottles Machine will be available in December 2026 Gtjdjx N I R Nspfx Ah Hot 6000 bottles/hour

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZOF01, type of input current: three-phase, total width: 900 mm, total length: 1,200 mm, total height: 2,200 mm, input voltage: 220 V, workpiece weight (max.): 450 kg, pass-through height: 1,200 mm, Equipment: CE marking, This filling machine could be linear tor rotary type which is designed according to customers capacity and filling volume. It suits different size of plastic and glass bottles, and the height of the filling nozzles is adjustable. The filling nozzles are made of SS304 or 316, resist high temperature filling. drip-proof , via photoelectric detection to ensure no bottle no filling. Gsdpfx Asxul Igsh Hett Widely used for liquid and paste filling. Also can be customized for other types of filling based on customer requirement.

Condition: used, Year of construction: 1990, Bottle washing machine MAG Sirio 8 3,000–11,000 bottles/h Bottle size: 0.2 l – 1.0 l Year of manufacture: 1990 Fully operational, runs until March 2026. Gtodpfxsx N I Ego Ah Hot