Used Bottles for sale (1,221)

Condition: used, Year of construction: 2006, Overview  The Heuft InLine TI 60 BFS2-r is an inspection system for empty PET bottles that was manufactured in 2006. With a maximum output of 36,000 bottles per hour, the machine is ideal for the efficient inspection and quality control of empty bottles in filling lines. The empty bottle inspector is equipped with several rejections and a wide range of accessories. Technical details  Output: Up to 36,000 bottles/hour Location: Germany Installation location: In front of the filler Immediately available Inspection functions  Bottom inspection: 1st bottom-IN-r Mouth inspection: Mouth-IN-r Side wall inspection: 1. sidewall-IN-r 2nd side wall IN-r Side wall with double resolution-r Support ring inspection: PET-r Abrasion inspection: RefPet Abrasion-r Ventslot inspection: RefPet Ventslot-r Stress crack detection: Stress Crack Detection-r Residual liquid detection: IR Rejection and adjustment options  Rejection: mono-X, DELTA-K-X Inlet control: mono-X Height adjustment: For rejections Cross adjustment: For rejections Accessories  Height-adjustable transport belts Cooling units for base housing and side wall Mouth outlet Dedju Scr Espfx Af Ueki

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Dkjdpfou Scr Ssx Af Uei

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Dsdpfxju H R Nnj Af Uoki

Condition: used, Year of construction: 2011, Overview  This complete filling line was designed for NRW and Euro bottles as well as crates and pallets and offers an output of up to 7,500 bottles per hour. The machines are from different years of construction between 1992 and 2022 and have few operating hours. The line is still in operation until the end of May and can be viewed in person. Technical details Output: Up to 7,500 bottles/hour Bottle formats processed: 0.33L & 0.5L (NRW, Euro, Ale) Crate formats processed: NRW and Euro crates Scope of delivery Palletizer | Flema | Star C-LC | 1996 (500 crates/h) Unpacker | RICO | UNO 1-head 124 | 2010 (350 crates/h) Decapper/decapper | ADELSKI | PPE 2005 | 1995 (2,000-12,500 bph, 8,500 operating hours) Bottle washer | PAC | CB 14-0.5l-R-7 LII Compact | 1998 (7,500 bph, 14,175 operating hours) Bottle inspector | SYSCONA | LC 10 FD | 2007 (caustic control & metal detection) Filler | ICS | multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 | 2011 (6,000 bph, 7,200 operating hours) Labeling machine | ANKER | Roland 8/3 | 1998 (7,000 bottles/hour, 14,500 operating hours) Inkjet printer | Keyence | MK-G1000 | 2022 (currently set up for dating on the ANKER Roland 8/3 labeler) Packer | RICO | UNO 1-head L-machine | 2012 (300 crates/h) Premixer | Jakü | PM-E-30-2k | 1992 (35 hl/h, deaeration & carbonation) Crate washer | RICO | 2500 1-bath | 2012 (600 crates/h) Dkjdpfxev Icubo Af Uji

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Dry tunnel | Shandong Yuesheng | 2019  Labeler incl. laser printer   Collecting table   Dedpfxjxgfr Ns Af Ueki

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Dkodpfx Afowg E D Ie Uei

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc): 16 rinsing heads 16 filling heads 1 crowning head Scope of Delivery  Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts DE filter | Spadoni | - | 2011 | 80 hl/h Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules   Dkodpfjyb Tkdex Af Uoi

Condition: used, Year of construction: 2010, Overview The components of this PET filling line were manufactured between 1997 - 2014 by different European manufacturers. The line is designed for carbonated beverages such as lemonades and also suitable for water with CO₂. With an output capacity of 33.000 bph, it offers a complete solution from bottle blowing to palletizing. The equipment becomes available as the seller replaced it by more modern machines. Technical Data Capacity: 33.000 bph at 1,5l Format: 1,5l Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: regularly maintained, stopped   Preform kipper | Sidel | EBHS 2050 | 2010 Preform feeding system | Sidel | EBHS 2050 | 2010 Blow mold chiller | Trane | RTAC 185 | 2003 Blow molding machine | Sidel | SBO 20 Series 3 Universal | 2010 Air conveyor | Ling | – | 1996 / 2001 / 2003 Mixer | Krones | MS 45/2 | 1997 Filler | Krones | VKS 140 | 1996 Cap conveyor | Gassner | – | 1996 Capper | ALCOA | Kupi 30/1080 | 1996 Camera inspection system | Intravis | Crown Watcher SN 1729 / V10.115-5299 | – Bottle inspection | Krones | Checkmat FM-G | 1996 Bottle inspection | Krones | Checkmat E | 2003 Bottle conveyor | Krones | – | 1996 / 2003 Bottle drying system | ACI | – | 2009 Labelling machine | Krones | HS 720-18 | 2009 Date coding (bottles) | Videojet | Excel 170i Ultra High Speed | 1996 Empty bottle inspection | Heuft | Squeezer | 2009 Shrink packer | Hartness | Multi Packer / Film | 2009 Multipack conveyor | Krones | – | 1996 / 2001 / 2003 Handle applicator | Project | Progrip S70 | 2001 Palletizer | Ocme | Pegasus F450 | 2014 Stretch Wrapper | Robopac | Genesis | 2014 Stretch Wrapper | Robopac | Genesis | 2014 Dsdpjya Hn Hsfx Af Ueki

Condition: used, Year of construction: 2011, Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be added if required) Documentation (not available, can be replaced) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal if bottles are too high, too wide or lying down Inspection of the bottle base Inspection of the mouth sealing surface Inspection of the thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) Detection of residual liquids (e.g. oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Monitoring of the rejection process Dkjdpfxou N Snke Af Uji

Condition: used, Year of construction: 2011, Overview  The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled.  Technical details  Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge  Rotary spraying  Continuous machine  Stainless steel body  Documentation  Software backup  Stainless steel pumps  Conductivity measurement  Finger task  Spare parts Bottle cell tips Bottle cell supports Dkodsu Rindjpfx Af Uji

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Dkjdetxd A Sspfx Af Usi

Condition: used, Year of construction: 2021, Overview The Wild Goose 4-row, glass bottle filling line was used 6 months only in a company in Finland. The line is equipped with rotary table to infeed and outfeed, rinsing machine for bottles, conveyor roller table, automatic bottle feeder for the bottles filling machine and the labeling machine. Producs: Full range of still and sparkling beverages including beer, seltzer, wine, ready-to-drink cocktails, cider, coffee, tea, kombucha, soda, cannabis drinks and more Components Machine type: Meheen M4 filling and capping machine Manufacturer: Wild Goose Year of manufacture: 2021 Machine type: labeling machine for self-adhesive label with ink jet for bottles (244) Manufacturer: Koneikko Year of manufacture: 2021 Technical Specifications Output: max. 1440 bph Lenght line: approx. 10 m, if the line is as a so-called single line bottle diameter: 5.3cm - 11.4 cm Single-phase 230V-AC, 50/60 Hz Dedpfstrh N Tex Af Ujki

Condition: used, Year of construction: 2007, Overview  The offered filling line for returnable glass bottles is composed of a selection of high-quality machines, chosen by BEVMAQ. Most of the machines were previously used in breweries in Germany. The condition of the machines is good, as they have been regularly maintained and continuously serviced. Apart from some of the machines, the majority has been dismantled by a German partner company and are now stored in a warehouse. The line layout can be adapted to the customer's needs and his plant layout, as the conveyors will be new or refurbished. Tech Specs  Capacity: 40,000 bph at 0.5 l bottles Suitable: Carbonated water and soft drinks Beer / Beer Mix recently serviced, regularly maintained Formats processed: 330 ml  500 ml YOM: ranging from 2007 to 2016 The Line in Detail Crate Depalletizer | Krones | Pressant Duplex | 2011 Includes safety fences, conveyors, offloading table Decrater | Krones | Linapac II | 2012 Machine can work as crater and decrater Bottle Washer | Krones | Lavatec | 2013 Crate Washer | Klotzki | 2011 Empty Bottle Inspector | Miho | David 2 | 2016 Counter Pressure Filler + Capper | KHS | Innofill DRS | 2013 Fill Level Inspection | KHS | 2013 Includes bottle rejection system and conveyor belt Tunnel Pasteurizer | Krones | Linaflex | 2013 Cold Glue Labeller | Krones | Topmodul | 2015 Includes a module prepared to work with seal label With servo driven bottle orientation Crater | Krones | Smartpack | 2011 Crater Palletizer | Transpak | NEW Bornbinder | Born| - | NEW Mixer | Famix | 30,000 - 2K | 2008 Flash Pasteurizer | GEA | 25,000 | 2007 All pallet, crate or bottle conveyors will be individually adapted to the plant design, manufactured in KHS/Krones standard. Necessary format parts for bottle, label, crate and cap handling can be supplied. Dkjdpfoxf D Dbsx Af Usi

Condition: used, Year of construction: 2014, Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima) Dedpfxjw N Nkpe Af Uoki

Condition: used, Year of construction: 2020, Overview This case packer was manufactured in 2020 by German company Mühlbauer. The machine is in excellent condition, has been well maintained, and is immediately available for sale due to discontinuation of use. It is ready for immediate operation and suited for various bottle and crate formats. Technical data  Capacity: 8,000 bottles/hour Formats: 0.50 l Euro bottle / 20-bottle Euro crate 0.50 l Euro bottle / 20-bottle module crate 0.33 l Gourmet bottle / 20-bottle Euro crate 0.33 l Longneck bottle / 24-bottle module crate 0.33 l Vichy bottle / 24-bottle module crate Machine condition: Very well maintained, ready to use Scope of Delivery  Bottle packer Mühlbauer Satelite EP-0400-T Dkodswmmnhjpfx Af Uoi

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical condition, dismantled blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1 Dkodpfxeyb Sa Dj Af Uoi

Condition: used, Year of construction: 2022, Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 rinser valves / 24 filler valves / 3×3 capping heads) | 2022 | Isobaric Automatic CIP System | WIN&TECH | — | 2022 | — Microfiltration Pallets (x2) | WIN&TECH | — | 2022 | — Wirehooder | ROBINO & GALANDRINO | REKORD 6 | 2022 | — Level & Cap Inspector | CMP | — | 2022 | — Capsule Distributor & Monoblock | ROBINO & GALANDRINO | ZENITH F 3/18 | 2022 | — Adhesive Labeller | MAKRO | 4 Stations | 2022 | — Bottle Conveyors | — | — | 2022 | Included Dodpeyb Tf Ijfx Af Uoki

Condition: used, Year of construction: 1999, Overview  This bottle washer was manufactured in 1999 by Italian company BODINI (model 201-10/66-11V). The machine is used for lemonade and syrup applications and has been maintained every 6 months by the owner. It remains in production until February 2026, where it can also be visited. After production stop, it will become available for removal. Technical data  Capacity: 4,500 bph Formats: 1 L 75 cl 33 cl Dimensions: 6.7 m × 2.2 m 0.5 m conveyor ≈ 2 m height Heating system: Electric heating system, 165 kW Power consumption: 160 kW with electric resistance 10 kW otherwise Air supply: 5 bar Dsdpsyb Titofx Af Ueki

Condition: used, Year of construction: 2016, Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Nominal capacity: 3.000 bph 16 Rinsing positions 16 Filling positions Single head capping unit for crown caps with cap feeding unit Double air pre-evacuation with CO2 Water spray device before capping, for reducing the amount of residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017 Box erecting and inserting machine With taping machine Accessories such as conveyors, cooling, pumps Dodpfxett Um Ro Af Ueki

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Djdpfxot Ul Exe Af Ueki

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Dedpfxsl Hx Ado Af Ueki

Condition: used, Year of construction: 2001, Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle carton 1000 ml: 12-bottle carton / 12-bottle plastic Year of Manufacture: various (1991–2016) Scope of Delivery  Depalletizer (TMG VEGA 50, 2001) Uncaser (Zecchetti DE Z 2T, 1993) Bottle washer (Bardi NILO 1 16R, 2001) Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) Carbonator (Muvitec, 2001) Decapper (Grassle REM 20, 1991) Dry air line (Europool TF 03, 2013) Labeling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) Case former (Siat HM 145, 2001) Case packer (Zacchetti IN Z 2T, 1993) Case sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) Sealant / hot melt unit (Preo EC5TRA2, 2001) Palletizing robot (ACMI ZX165U, 2002) Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) Silo caps (3 Master ALN600LT, 2001)   Dkodpjwhvc Refx Af Uji

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Dsdjl Hx Enjpfx Af Ueki

Condition: used, Year of construction: 2002, Overview This PET bottling line was built between 2002 and 2013 by the German manufacturer Krones and is designed for bottling still and sparkling water in PET bottles with an Alaska neck finish. The line is in production until September 2025 and can be viewed in operation by prior appointment. Technical details Output: 22.000 bph (the nominal speed at 0.5 is 25.000 bph) 60 rinsing nozzle 80 filling valves 15 capping heads Product: Water Container material: PET Neck format: Alaska Label type: OPP Capper brand: Zalkin Years of manufacture: 2002, 2009, 2013 Scope of delivery  Compressor: Atlas Copco ZD2300VSD (2009) Blowing machine: Krones Contiform S14 (2009) Air conveyor: Eurosistemi (2002) Filler: Krones Volumetic, Variojet (2002) Labeler: Krones Contiroll (2013) Dsdpfx Afswqpgzo Uski

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Dkedpfx Afswzvl Ss Uoi