Used Bottom Plate for sale (12,827)

Year of construction: 2011, condition: used, functionality: fully functional, The plate heat exchanger is build up in modules and therefore flexible with respect to enlargements or reductions. It is easy to change the capacity by respectively enlarging or reducing the number of plates. Nedewcqvzopfx Aanjdf

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: 4-AXIS, number of rollers: 4, roller (bottom) diameter: 245 mm, roller (top) diameter: 265 mm, side roll diameter: 185 mm, roller diameter: 280 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 14 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 7,500 kg, total length: 4,200 mm, total width: 1,500 mm, total height: 1,600 mm, power: 18 kW (24.47 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll plate bending machine 2500 X 12 mm with central support hydraulic for large diameters and side arm plate support Capacity plate width 2500 mm Plate thickness 12 mm Prebend 10 mm Upper roll 265 mm Lower rolls 245 mm Surface useful on rolls 2550 mm Power supply 380/50 Electric motor 15 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the rollers Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Nodpfx Aaexw S Eqensdf Central support vertical hydraulic operated for large diameters Side arm operated hydraulic support Total weight of the machine 7500 Kg machine layout 4200X1500 X H1600 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Electric back gauge: 1,000 mm MACHINE DETAILS Machine weight: approx. 10,100 kg Ndedpfoxxr H Rex Aanjf EQUIPMENT Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Nodpfxenl D Tfo Aanedf Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 3-roll plate bending machine by Akbend Akyapak Ndodpfxoxy Ag Ro Aanof Model: ASM-S 200-25/6.0 MJ Capacity: 2500 x 6 mm Top roll: ø 200 mm Year of manufacture: 2011

Condition: new, Year of construction: 2025, – Capacity 2070 × 9 mm (minimum diameter 900 mm) 2070 × 7 mm (minimum diameter 270 mm) Bending capacity 2070 × 7 mm (minimum diameter 900 mm) Bending capacity 2070 × 5 mm (minimum diameter 270 mm) – 4 rolls – Hydraulic operation – Hardened rolls – Top roll diameter: 180 mm – Bottom roll diameter: 180 mm Nodpfxox Hq Dye Aanjdf – Side roll diameter: 150 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swing-out – Steel construction made of ST-52 – Hydraulic drop-end system for easy positioning of the rolls – Hydraulic lifting and lowering system for center and side rolls – Hydraulic balancing system – Overload protection – Documentation – 400V

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) Rated current: approx. 0.4 A Rated power: approx. 40 W The magnet is tiltable up to 90° and has a sinus support surface. Net weight: 29 kg Ndsdpfsxcimijx Aanof

Condition: used, total length: 545 mm, total width: 545 mm, drop-through hole in table: 90 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 Njdpfx Aovcywvsanodf No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 Nodpsxdigfsfx Aanedf - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2024, TRtech ORGM-3004 Reducer Guillotine Shear 1 EUR 30.500,00 Cutting Length: 3100 mm Nedpsvdz Rtofx Aanedf Cutting Capacity for 450 N/mm² (MS): 4 mm NC Back Gauge Range : 750 mm Cutting line lightning & shadow illumination Raer safety covers with photocell Squaring arm with T slot, stoper and ruler Cutting unit counter Front sheet holding arms: 3 pcs Finger protection cages Table with ball transfer Cutting gap adjustment Motor Power : 7,5 kW Height : 1380 mm Width : 2300 mm Length : 3700 mm Cutting Angle : 1° 30' Weight Approx. : 4000 kg Options Return to sender & Rear pneumatic sheet support system 1 EUR 3.300,00 EUR 3.300,00 Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 33.800,00 Delivery time: EX-Works OSM Makina, 8 weeks after the reception of order SEAL AND SIGNATURE Delivery time: EX-Works OSM Makina, 8 weeks after the reception of order

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder Ndedpowka Upofx Aanjf - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: good (used), Year of construction: 2000, Measuring and granite plate, manuf. Oelze, 1000x1500 x 220 mm, with base frame Nodpfx Aasxxzp Uonedf

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 945 mm -Length: 2990 mm Nsdpfxeb S Taqj Aansdf -Height: 58 mm -Working height: 870 mm -Plate: with support ribs -Groove width: 24 mm -Center distance between the T-slots: 180 mm -Dimensions: 3605/950/H870 mm -Weight: 2290 kg

Condition: used, total length: 900 mm, total width: 620 mm, drop-through hole in table: 250 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Ndjdpfx Aaovcywionof Further information and prices are available on request.

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm Ndodpfoxyln Rox Aanjf thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Zero Clamp Zero Point Clamping System Base Plate with 3 Clamping Plates For sale is a Zero Clamp zero point clamping system. The system was used only a few times after purchase and is therefore in very good condition. Ndodexqqh Dopfx Aanof Scope of delivery: - 1x Base Unit TK200/4 (Original price: €4,423.00) - 1x Connection Block Komfort 5-A (Original price: €364.50) - 1x Zero Clamp Quick Coupler, Brand Garant 360019 10241 (Original price: €41.30) - 1x Cover Plate TK200/4 (Original price: €116.50) - 3x Plate TK200/4, each with 4 clamping studs M16 (Original price: €2,022.00) - Plus screws as shown in the pictures. Total original price: €6,967.30 net. Ideal for precise and rapid clamping in mechanical engineering / toolmaking. Price: €3,999.00 negotiable, net. No warranty or returns.

Condition: used, Year of construction: 2009, machine/vehicle number: 09102020, Lg. No. 25420 Manually operated 3-roll plate bending machine with asymmetric roll arrangement Technical data: Ndedjx Exr Aspfx Aanjf - Max. working width: 1020 mm - Max. material thickness: 1.5 mm - Roll diameter: 64 mm - Top roll crowned, swing-out forward - Rear roll adjustable at an angle via handwheel for conical bending - Lower roll adjustment with lever and eccentric - Front roll parallel - Required space: approx. W 1250 x H 950 x D 750 mm - Weight: approx. 200 kg

Condition: new, Year of construction: 2025, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Ndedpfxocnxc Rj Aanjf Scope of delivery: 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm Ndjdpfx Aaew Dzk Eensf -Weight: 4500 kg/unit

Condition: used, total length: 800 mm, total width: 507 mm, drop-through hole in table: 155 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request. Ndedpfx Aajvcyxyensf

Year of construction: 2025, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying Nodjd Tyaaepfx Aanodf panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: used, total length: 600 mm, total width: 520 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 Njdpfx Aaevcyyksnjdf No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 1,200 mm, total width: 600 mm, drop-through hole in table: 220 mm, Used clamping plates in the following sizes are available for sale: Ndodpfxsvcyrts Aanof No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 780 mm, total width: 600 mm, drop-through hole in table: 120 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request. Nsdpfx Aajvcyx Tonedf

Condition: used, total length: 1,100 mm, total width: 700 mm, Used clamping plates in the following sizes are available for sale: Njdovcyp Sspfx Aansdf No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.