Used Brake Bleeding Device for sale (28,954)

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18031539, workpiece weight (max.): 750 kg, workpiece diameter (max.): 600 mm, total width: 650 mm, total length: 704 mm, total height: 585 mm, empty load weight: 334 kg, input voltage: 400 V, type of input current: three-phase, JAVAC POS-750AC welding positioner for sale. Technical specifications: - Manufacturer: JAVAC - Model: POS-750AC - Year: 2018 - Serial Number: 18031539 - Input voltage: AC 400 V / 50 Hz - Permissible welding current: 400 A / 100% - Table diameter: 600 mm - Hollow shaft: 60 mm - Table speed: 0.12–1.2 rpm - Tilting range: 0–135° - Max. vertical load: 750 kg - Weight: approx. 334 kg - Approximate dimensions: 704 x 650 x 585 mm Used equipment, sold as is. Currently available for inspection but not connected to power. Condition and completeness are shown in the photos. Tjdpfx Abszuyaqetob Location: Estonia. Loading: Forklift and pallet handling facilities are available on-site. We can load the equipment onto the buyer’s truck. Transportation: Transportation costs are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Year of manufacture: 2006 Tsdszrnrcopfx Abtjb Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 35,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TruBend 5170 / 4m bending length Year of manufacture: 2/2014 Press force: 1700 kN (170 tons), bending length: 4,080 mm Machine operating time: 35,000 hours, hydraulic operating time: 25,000 hours Control system: TASC 6000 Tsdpfezrnpuox Abteb Configuration: 1 active bending assistant, 2 support consoles 4-axis backgauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Tedpfx Ajydpxvebtob Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, Technical details: length: 1200 mm width: 500 mm Todpfx Aovfduwjbtsb height: 1260 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength Todpfx Aey Saurobtob - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned Todpfx Abszugqiotjb 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Todpfxsy U I Tue Abteb Year of Manufacture: 10/2022 Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, Press force: 50 t Bending length: 1275 mm Frame width: 1040 mm Stroke: 215 mm Usable installation height: 385 mm Overhang: 420 mm Standard equipment: - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves Tjdpfx Aezt R Hrebtjb - Modern block hydraulics - CNC back gauge with rack and pinion drive for the X and R axes - Safe shifting of the gauge fingers from the front - Upper tool clamping system "New Standard Clamping II" manual - Lower tool holder for EV dies, clamping hydraulic, shifting programmable (2 positions) - Control system TRUMPF TASC 6000 - Safety device consisting of side and rear protective doors - Control cabinet air conditioning - Network compatible Optional equipment: - 2 additional gauge fingers, attachable - Upper tool clamping hydraulic - Bendguard - Roll protection cover at the rear - Support console - Preparation for ACB

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 170 t Tedpfx Abjzt R Eujtob Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 445 mm Accessories: - 2 front support arms - Light curtain in front of the machine - Foot switch - Wila quick-release system at the top and bottom - TASC 6000 control system - Die shifting mechanism - Including tools - Crowning - 6-axis back gauge

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Tjdpfx Aozt R D Debteb Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: -CNC control Cybelec DNC 880 S -2 support arms -Foot switch -Side protective doors -Laser safety system -Tool holder EHT -Pneumatic die shifting system -Crowning -Controlled axes: y1, y2, x, R

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Tjdpfjzt R A Hex Abtob Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Condition: used, Year of construction: 1999, machine/vehicle number: 80858, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 200 mm, total length: 4,400 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 10,400 kg, Equipment: CE marking, HACO ERM 40150 (80858) Technical condition: Used Bending length: 4100 mm Tonnage: 150 T Type of press brake: Synchronized Back gauge: Y1 + Y2 + X-R CNC controlled Back gauge length: 800 mm Crowning: Yes (CNC controlled) Daylight opening: 400 mm Tjdpfx Ajzxg Hxjbtsb Stroke: 200 mm Control: BC 45 Robosoft graphical control Motor power: 15.0 kW 400V Tooling: Yes, 1 set of bending tools Tooling standard: European standard Overall length: 4400 mm Overall depth: 1700 mm Overall height: 2500 mm Weight: 10,400 kg Serial number: 80858 Year of manufacture: 1999 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 82885, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 135 t, stroke length: 200 mm, total length: 3,500 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 7,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HACO ERM 30135 (82885) Completely rebuilt, including a new control system. Technical condition: As new. Bending length: 3100 mm Tonnage: 135 tons Todpfxjzxgrhj Abtsb Type of press brake: Synchronized Back gauge: Y1 + Y2 + X CNC controlled, R-axis manual Back gauge length: 800 mm Crowning: Yes (manual) Throat depth: 400 mm Overhang: 250 mm Stroke: 200 mm Control system: ATS 595 Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Year of manufacture: 2007 Overall length: 3500 mm Overall depth: 1700 mm Overall height: 2500 mm Delivery and installation at your location are possible; delivery costs and any additional charges will be discussed separately.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 83888, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 150 t, distance table to ram: 3,150 mm, total length: 4,100 mm, total height: 2,500 mm, overall weight: 8,500 kg, Equipment: CE marking, documentation/manual, HACO ERM 36150 (83888) Technical condition: New Bending length: 3600 mm Tonnage: 150T Type of press brake: Synchronized Back gauge: Y1 + Y2 + X CNC controlled, R-axis manual Back gauge length: 800 mm Crowning: Yes (manual) Daylight opening: 400 mm Control system: EASYBEND 2D Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Total length: 4100 mm Total depth: 1700 mm Total height: 2500 mm Weight: 8500 kg Tsdpfxjzxgrbe Abteb Serial number: 83888 Delivery and installation at your location are possible; delivery costs and any additional charges will be discussed.

Condition: repair required (used), Year of construction: 2019, pressing force: 220 t, overall weight: 12,620 kg, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Tsdpfx Aozuw Ewobtjb Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Ram holder: hydraulic Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Weight: 12,620 kg Transport packages: 1 EQUIPMENT Tools

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! Tsdpfxozxiv Ne Abtsb You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: used, length 1000 mm width 800 mm Tedpfx Abogrngdjtjb height 630 mm weight 460 kg T-slot - width 50 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Table width: 800 mm Table height: 630 mm T-slot length: 50 mm Weight: 460 kg

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm Todoxf Na Uopfx Abtjb 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: used, length 575 mm width 510 mm height 1015 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 575 mm Table width: 510 mm Todpsylz Edjfx Abtsb Table height: 1015 mm

Condition: used, / Tjdpfx Ajzcq Hxebtjb weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg NEIGHBOR

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures. Tedpfoy Tbvmex Abtjb

Condition: used, centre height 160 mm Todpfx Abozcgb Sjteb chucking diameter 200 mm hollow 54 mm

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Tjdpfx Abjzcgh Eetob Weight: approx. 115 kg For further dimensions see pictures

Condition: excellent (used), length 690 mm thread M16 height 1020 mm weight of the machine ca. 360 kg Tedszcgk Topfx Abtob Angle table with breadboard table LxWxD: 1020x690x40 mm Fixing LxW: 330x690 mm Thread: M16 Weight: 360 kg