Used Servo Brakes for sale (23,800)

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Isdpfx Aomk S Sljb Ioa Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: ready for operation (used), Servo-driven tapping and threading machine, Used machine Manufacturer: Electric Servo Model: M12H Dimensions: Width: 700 mm Depth: 150 mm Height: 520 mm Radius: 1100 mm Comes with Tap Torsion GT 12-0316 chuck set: 3.5 × 2.7 M3 4.5 × 3.4 M4 8 × 6.2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 M12 Torsion u-9 Iedpsxdfauefx Ab Isa

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SCV-40-G8-6-KW3, total width: 406 mm, overall weight: 4,000 kg, control voltage: 400 V, sheet thickness steel (max.): 6 mm, Completely new machine, never put into operation due to failed work. Motorized unwinding unit with loading carriage. Electric feeder (AE400). Drive (motor) + control from SIEMENS. The measuring roller is located in the front of the machine, which monitors the correct feed with an accuracy of +/- 0.1 mm. The unit complies with CE standards. Coil weight: 4,000 kg Coil width: 406 mm Coil outer-inner diameter: Ø1400 mm - Ø508 mm. Material thickness: 0.6mm - 6mm Voltage: 400 V - aux 24V Ijdpfx Abjv Dumbo Ija

Condition: used, TECHNICAL DETAILS * Spindle speeds : 200-20000 [rpm] * Travel : 38 [mm] Isdpjuhab Hofx Ab Isa - Distance table/spindle axis : 89 [mm] - Table dimensions : 182 x 300 [mm] - Machine height : 342 [mm] EQUIPMENT - Collets set

Condition: new, functionality: fully functional, Year of construction: 2025, throat depth: 400 mm, warranty duration: 24 months, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 Iodpfx Aewzqx Hjb Iea X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. Isdpfx Aev Hchlob Ija 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: excellent (used), Year of construction: 2017, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control system: NC5 Operating hours: 10,800 h Clamping unit type: 420/... Clamping force: 420 t Platen size (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mold height (min.–max.): 380 – 1050 mm (increased by 225 mm) Maximum distance between platens: 1050 mm Opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever mechanism with central oil lubrication Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Iedpfx Abexywd De Ija Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, L:D standard) Additional equipment Rotary Servo Technology variable displacement pump (activeDrive) 5/2 pneumatic valve no. 1 for mold moving components (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle band heater (socket) 2 core pull circuits controlled by proportional valves, pressure-independent (programmable with unlockable check valves against core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position control, programmable independently of P/F+v, parallel to mold movement Ejector movement controlled by proportional valve, stepless adjustment Reinforced oil cooler (cooling water inlet up to 35 °C)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,910 mm, total width: 900 mm, total length: 650 mm, pressing force: 150 t, table width: 900 mm, table length: 650 mm, operating speed: 220 mm/s, overall weight: 6,000 kg, reverse speed: 220 mm/s, ram plate width: 750 mm, ram plate length: 500 mm, working height: 950 mm, stroke length: 400 mm, pressure: 290 bar, pressing speed: 8 mm/s, Equipment: documentation/manual, safety light barrier, TECHNICAL DATA: Force: 150 t Motor power: 11 kW Cylinder stroke: 400 mm Variable working speed: 8 - 0 mm/sec Approach speed: 220 mm/sec Return speed: 220 mm/sec Working pressure: 290 bar Table size: 900 x 650 mm Ram size: 750 x 500 mm Open height: 650 mm Working height: 950 mm Width: 1,360 mm Depth: 2,135 mm Height: 2,910 mm Weight: 6,000 kg We have developed motorized screw pumps of the CR/SERVO series with low energy consumption and energy savings of up to 60%. These were specifically designed for tasks that require high production output in the fields of stamping, drawing, and punching. The latest generation CR-SERVO presses have been advanced for versatile applications, including the option to integrate these units into automatic production lines. FRAME STRUCTURE: The steel frames of this series are made from a fully welded structure manufactured exclusively from S355JR grade steel. They are stabilized and machined after welding to ensure perfect parallelism and precision. The design and calculations are performed using finite element software to guarantee our high standards of precision and quality. They feature upper and lower table/ram platens made of C45E steel, fitted with T-slots according to DIN 650. The upper plate ensures perfect parallel alignment via two side guides with a 50 mm diameter and maintenance-free bearings. Isdpfewkvktox Ab Ioa HYDRAULICS: Single-acting main cylinder with a guide bush, chrome-plated piston and maintenance-free wear-resistant guides. For fast approach and rapid return, two side-mounted double-acting cylinders have been installed, enabling quick movement with chrome plating and guidance. REXROTH hydraulic unit with servo motor and prefill valves, including prefill valve for approach and return, and pump with constant output and constant speed operated via the servo motor system, check valve, pressure relief valve, spindle shutoff valve and air cooling. ELECTRICS: Standard equipment includes a SIEMENS PLC model SIMATIC S7 1200 and a 7” touchscreen panel model MPT-700. This allows for programming of force, stroke, and speed, with capacity for storing up to 300 programs. The electrical and hydraulic valves are redundant and automatically controlled. An additional safety block and autodiagnostic devices for valve and safety monitoring are included. Inspection and certification of correct function and safety distances for light curtains is performed. Operation is via a low-voltage electric foot pedal. To ensure operator safety, there are type 4 PLe electrical safety interlocks in the front working area, two hinged side safety guards with safety valves, and internal LED lighting. Complies with all essential safety and health requirements according to CE standard.

Condition: ready for operation (used), Year of construction: 2019, A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible. Ijdpfxowa Tixe Ab Isa

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, empty load weight: 600 kg, bar diameter (max.): 120 mm, bar length: 1,600 mm, TECHNICAL DETAILS Bar length: 130 – 1,600 mm Bar diameter: 6 – 120 mm Isdpjxxlzzofx Ab Ioa MACHINE DETAILS Machine weight: 600 kg Required space: 2.5 × 2.0 × 1.9 m

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m Iodoxzzu Nepfx Ab Isa All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2000, total length: 3,700 mm, total width: 2,000 mm, total height: 2,750 mm, Weight: 8.500 kg Price: On request Iodpfjw Igwqex Ab Ija - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 752200069 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-80 - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 120 - Max. working width [mm]: 3000 - Column gap [mm]: 2600 - Backgauge depth [mm]: 500 - Max. stroke [mm]: 80 - Control type: Cybelec DNC-80 - Control: CNC - Transport dimensions: 3700mm x 2000mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Servo motor, geared motor, electric motor, micro geared motor, mini geared motor, DC motor with planetary gearbox -Manufacturer: Nucleus, servo motor with gearbox, micro geared motor -Type: unfortunately no exact type designation -Item No.: FUK1101 -Tension: -Shaft: Ø 20 mm / M8 Isdpfx Asxzzbpeb Ija -Number: 9x geared motors available -Price: per piece -Dimensions: Ø 40 x 170 mm -Weight: 0.5 kg/pc.

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm Ijdpfxjxn U Rqo Ab Iea TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Condition: used, functionality: unexamined, Ferwood Code: RU0009418 - Manufacturer Code: 10.S4.D31-347M - Condition: Used - Functionality: Not tested - Compatible Machine: CNC - EDGE BANDING MACHINE IMA COMBIMA - IMA BIMA - HOMAG - WEEKE - If interested we offer an overhaul service, contact us. Ijdpfx Ajv Hzvhsb Isa

Condition: used, Year of construction: 2019, total length: 1,070 mm, total width: 1,940 mm, total height: 2,020 mm, Weight: 2.000 kg Price: On request - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Power [kW]: 4.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 40 - Max. working width [mm]: 1500 - Column gap [mm]: 1550 - Backgauge depth [mm]: 500 - Max. stroke [mm]: 150 - Transport dimensions: 1070mm x 1940mm x 2020mm (l x w x h) - Transport weight [kg]: 2000kg Isdexcxqqepfx Ab Ija - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS CNC PRESS BRAKE AXIS: R - X - Y2 - Y1 BENDING LENGTH: 4050 mm TONNAGE: 165 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 3100 mm OPEN HEIGHT: 450 mm Iodpfx Abjkh Uqls Ioa UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 100 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 14000 Kg OVERALL DIMENSIONS: 4500 x 1750 x 3000 mm NOTE: WITH No1 4000 MM NEW UPPER PUNCH, No 1 835 MM NEW UPPER PUNCH, No 1 4000 MM NEW BOTTOM DIE WITH 75 MM V-TYPE ; No 1 835 MM NEW BOTTOM DIE WITH 80 MM V-TYPE

Condition: used, functionality: unexamined, Ferwood Code: RU0004072 - Manufacturer Code: USAGED-09A21 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Isdpfxov D Ihlo Ab Ija

Condition: used, total length: 3,000 mm, total width: 600 mm, total height: 2,130 mm, Weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 2439 - Drive system: Conventional - Press force [ton]: 83 - Max. working width [mm]: 2500 - Column gap [mm]: 2700 - Crowning system: None - Punch holder: Standard - Transport dimensions: 3000mm x 600mm x 2130mm (l x w x h) - Transport weight [kg]: 2500kg Isdpoxr Dnmofx Ab Ioa - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 Iodpfx Asrk Sg Rsb Ioa WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Condition: used, functionality: unexamined, Ferwood Code: RU0004084 - Manufacturer Code: USAGED-13VML11 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iodpfx Aov Ed Nusb Ioa

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 BENDING LENGTH: 3150 mm TONNAGE: 70 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2640 mm OPEN HEIGHT: 450 mm APPROACH SPEED: 160 mm/sec RETURN SPEED: 160 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 7800 Kg Iedork Shcopfx Ab Ioa OVERALL DIMENSIONS: 3400 x 2100 x 2650 mm

Condition: used, functionality: unexamined, Ferwood Code: RU0009577 - Manufacturer Code: R911320673 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iedpfx Abjv In D Uj Ija

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm Iodpfx Abetq Ngbs Iea TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 3130 mm TONNAGE: 80 ton THROAT DEPTH: 405 mm DISTANCE BETWEEN UPRIGHTS: 2700 mm OPEN HEIGHT: 350 mm UPPER BEAM TRAVEL: 150 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 96 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 5,5 kW CONTROL UNIT: TASK 84 SIRIO 2 WEIGHT: 6500 Kg Iodpomyc I Njfx Ab Ija OVERALL DIMENSIONS: 4400 x 1700 x 2400 mm