Used Brandt Kdf 530 C for sale (91)

Year of construction: 1988, condition: used, - working length max. (mm): 3100 Ljdpekx Hpajfx Adwjhb - profile height max. (mm): 200

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm Lsdpewkbd Esfx Adwohb - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Lhjdpfx Aew S E Rqsdwsb

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom pre-milling unit Lsdjt Hxxpepfx Adwjhb 2 x earning-multifilling unit profile cyclin flat cyclin polisher machine has nc cutter control and pneumatic package max workpiece height 60mm max thickness of veneer in a roll 3mm feed rate max 14m/min Machine well maintained in very good condition

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Lhsdpfewq Sc Sex Adwjb Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Condition: good (used), Year of construction: 2006, - Glue pot Ledpfxjibdyqs Adwjhb - Conversion: carried out by the company Hüttenhölscher in Verl - Application: glue application line for handle strips - Vacuum table: included - Automatic pressure zone: included

Condition: used, Year of construction: 1988, - with lateral crosscut saw Ledjbaz E Aepfx Adwohb

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0 - 251 - 20 - 4507, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Lhjdpsxzp Uwsfx Adweb

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Lhodpfx Ajh Ak D Usdwob Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg Gluing, End cutting, Top & Bottom trimming, Scraping Price Euro 4900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on a Homag Edgeteq S-200, KDF 1130 FC (1100 kg). However, it will certainly also fit other machines, e.g. Brandt (may require slight modification). Length of U-profiles approx. 1130 mm Build height incl. rollers approx. 150 mm 4 robust steel swivel castors with grease nipples 2 brakes 2 leveling plates for height adjustment The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "more offers from this seller". Ljdjw S Dmdepfx Adwohb

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Lhedpsxdy Slsfx Adwob

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Lodpfoq Ehpaex Adwohb Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, Year of construction: 1988, used, good conditionmanufactured by Brandttype F10 + EK 11 - trimmingbuilt in 1988Masch.-No. 0-260-01-2188/0-260-01-2746required space ca. 1100 mm x 1100 mm x 1700 mmlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revision,without guarantee and warranty Lhodpfx Asvwf Txedweb

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm Lhedpfx Adeigadlswjb suction nozzle 80 mm pneumatic connection cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Condition: used, Type: OPTIMAT F 13 Year of construction: 2001 Condition: function-tested, very good, second-hand - Workpiece thickness 16 to 55 mm - Workpiece width min. 30 mm - Inner radius min. 35 mm - Edge thickness max. 3 mm - 2 milling motors 0.4 kW - Suction connection 80 mm Lsdoud U Iyspfx Adwshb

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Lhodpoxhgk Ajfx Adwob Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Lodpfexw Ttvsx Adwjhb Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0-261-07-2126, edge thickness (max.): 8 mm, working height: 950 mm, workpiece width (max.): 60 mm, workpiece length (max.): 4,760 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: KDN 530 C Lhjdpfx Adou Tur Rsweb Machine length: 4,760 mm Connected load: 6 kW Weight: 1,900 kg Suction diameter: 2 x 100 mm Working range Feed speed: 11 m/min (optional: 14 m/min) Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roll cutting: max. 3.0 x 45 / 0.8 x 65 mm Working height: 950 mm MACHINE DETAILS Machine dimensions (W x H): 1,560 x 2,300 mm Voltage: 400 V, 3 Ph, 50 Hz Pneumatic operating pressure: 6 bar Noise emission value: 80-87 dB(A)

Condition: used, machine/vehicle number: 008367, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Lhodpjx Swfhefx Adweb Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Lhjdpfxjv Sf I Ee Adwjb Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Sanding unit (pre-milling) for panels. End trimming unit with two motors. Edge trimmer Edge scraper (radius/flat) Brushes Lhedpfx Adex I Izlowjb Control: Touch screen display

Condition: used, Year of construction: 2011, Type KDF 220 C Year of manufacture: 2011 Units operated from the display Gluing unit Lodsxc N Hvopfx Adwshb Cross-cut saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-50 mm Feed speed: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg €19,990 including VAT, shown separately on the invoice

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Veneering machine Brandt O KDF 430 C Year of manufacture: 2008 Technical condition: very good Lodsrxcbkjpfx Adwshb Technical data: - Power supply parameters: 400V 50Hz, max. 19A. - Plywood thickness max: 8 mm - Board thickness max: 60 mm - Thickness of endpaper in roll max: 3 mm - Feed rate max: 11 m/min - Electric height adjustment: yes - Glue system granulate: bottom glue tank - Pre-milling cutter: yes - Drip saw: 2 motes - Straight and radius milling units: 1 - End rounding aggregate: 1 motor - Sanding unit: Profile scraping, Flat scraping - Polishing unit: yes - Edging storage: yes - Clocking units: NC axes - Design: Right-hand machine - Machine length: 4,860 mm

Condition: used, Ambition 1430 Glue Pot: UK Stock - £500 Collect or Delivered at cost Lodpewyxq Iefx Adwehb Spare Glue pot for Brandt Ambition 1400 series / KDF 430 machine. Glue pot is compatible with machines that have a pre-melting unit fitted. Good condition pot, ready to use.

Condition: excellent (used), Year of construction: 2005, Brandt KDF 530 C Edgebanding Machine with Jointing, Corner Copying, Two Scrapers, and Riepe Spray Units. A video of the machine in operation can be provided upon request. The machine is highly automated. Edge thickness: approx. 0.4 – 8 mm Workpiece height: approx. 10 – 50 mm Feed speed: approx. 11 m/min Soundproof enclosure Extendable workpiece support Extraction connections: 1x200 mm, 1x100 mm, including the ducting shown PC16 control system with color display for easy machine operation Units: - Pressure beam manual adjustment with SIKO counter Lhjdpfxexd Dude Adwsb - Infeed fence manual adjustment with SIKO counter - Riepe release agent spray system - Jointing milling with Leitz WhisperCut carbide-tipped jointing cutters, resharpened - Gluing station switchable between clockwise and counterclockwise operation - Pressure zone with 3 rollers - Cross-cut saw with 2 motors, for straight or beveled cuts (program adjustment) - Combination milling unit with motorized side adjustment - Radius scraper R2, pneumatic adjustment - Corner rounding unit R2 with 1 motorized diamond cutter, pneumatically adjustable between thin and thick edges - Glue joint scraper, pneumatically retractable with large roller - Riepe cleaning agent spray system - Buffing unit Hood lock CE marking Operating manual as binder and CD All reversible blades of the milling and scraper units have been replaced or rotated, saws resharpened, jointing cutters resharpened, buffing discs replaced. The machine is immediately ready for use. Only the diamond cutter on the profile milling unit has not been replaced but remains sharp. Minor paint touch-ups. Approx. 3500 operating hours. The machine's condition speaks for itself. Occasionally, the PC reboots while the machine is running (mostly at high room temperatures), but this has never posed a problem for us and work can continue in the meantime. Machine dimensions approx. 4800 x 1200 x 1800 mm (L x W x H) Weight approx. 1900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see “other offers from this seller.”