Used Briqueting Press for sale (12,484)

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm Hjdsgv I N Uepfx Adwofk 9. Machine Weight: 60.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm Hsdpfedfc Ikex Adwofk 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: used, Technical specifications: Briquette diameter: 55 mm Briquette length: 50 mm Tank diameter: 1000 mm Tank height: 910 mm Hfsdpfx Adozd Erwswjk Tank capacity: 2.86 Output: 910 L Feed capacity: 400 L Motor power: 4 kW Safety switch Overall dimensions: Length: 1700 mm Width: 1100 mm Height: 1490 mm

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Hfodjzd Akkepfx Adwjk Overall dimensions: Length: 1670 mm Width: 1100 mm Height: 1500 mm

Year of construction: 2023, condition: new, Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube holder for the briquetting press - Viewing window in the container Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must ensure protection against hydraulic oil leakage Hsdpekuz Tuefx Adwjfk - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.

Year of construction: 2017, condition: ready for operation (used), Technical specifications will follow! Hfsdjgny Ryjpfx Adwjk

Condition: excellent (used), Year of construction: 2022, operating hours: 6,500 h, functionality: fully functional, For sale: 3 UMP BP 500 A sawdust briquetting machines. Model years: 2022, 2022, 2023. The machines are fully operational and have all undergone a complete service. Hjdpfx Ajyr S T Sodwjfk

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, RUF Briquetting System RB 4/2500/60 with Mucki Lifting and Tilting Device – Year of Manufacture 2001 Manufacturer: RUF GmbH & Co. KG Type: RB 4/2500/60 Year of Manufacture: 03/2001 Hfodpfx Aszhgwvsdwsk For sale is a high-quality hydraulic briquetting system from RUF for processing aluminum chips. The system is equipped with an automatic Mucki lifting and tilting device (Type MD-3, load capacity 500 kg) and enables largely automated operation. The press compacts loose aluminum chips into compact briquettes, thereby significantly reducing the material volume. At the same time, cooling lubricants can be recovered, and the revenues from recycling can be increased. Technical Data Manufacturer: RUF GmbH & Co. KG Type: RB 4/2500/60 Year of Manufacture: 03/2001 Operating Voltage: 400 V / 50 Hz Connected Load: 20 A Protection Class: IP54 Briquette Diameter: 60 mm Material: Aluminum Chips Hydraulic Briquetting Press with Automatic Pre-compaction Large Material Hopper Automatic Feeding PLC Control Mucki Lifting and Tilting Device Manufacturer: Dieterle Maschinenbau GmbH & Co. Type: MD-3 Year of Manufacture: 2001 Load Capacity: 500 kg Power: 2.2 kW Equipment Automatic Lifting and Tilting Device Material Hopper Safety Enclosure Hydraulic System Complete Control Panel Operating Manual and Documentation Available CE Version The system is in good overall condition and comes from ongoing production. Inspection is possible by appointment. Loading can be assisted upon agreement.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,400 h, functionality: fully functional, overall weight: 6,000 kg, input voltage: 400 V, oil tank capacity: 200 l, pressing force: 200 t, pressure: 300 bar, compressed air connection: 10 bar, power: 18.5 kW (25.15 HP), year of last overhaul: 2026, filling opening width: 3,000 mm, Equipment: emergency stop, Selling a fully automatic briquetting system with a packaging line. In automatic mode, the system produces wood briquettes in 10 kg packages without supervision. Before palletizing, the weight is checked. Packages that are underweight are sorted out and placed on a separate pallet. The palletizing robot serves 4 pallet stacking stations, each with a capacity of 96 packages. In the event of a malfunction, an alarm is sent via SMS. Both the briquette press and the palletizing robot have been used very little and are in very good condition. The machine can be inspected while in operation. Consisting of: - Hopper, 10 m³ - Briquetting press RUF 300 - Curved conveyor belt - Straight conveyor belt, 7 m - Stacking machine, fully automatic, special design, pneumatically operated, Siemens PLC with adjustment options and package counter - Insert for leaflets, Köra Packmat - Film packaging machine Affeldt, pneumatically operated Hodpfx Adjzdk Ukjwjfk - Shrink tunnel Affeldt - Accumulation conveyor belt, 4 m - Singulation conveyor belt, 1 m - Roller conveyor, 1 m with load cells for weight control, Siemens PLC - Palletizing robot KUKA KR 210 R3100 ultra, approx. 4000 operating hours - Gripper, pneumatically operated with clamping and ejector - Safety fence with roller gate

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Hfedpfxsv Rpxle Adwok Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm Hsdsd Nm Sispfx Adwsfk - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how Hjdpfochqxxex Adwjfk + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW Hsdpfegfm Ryjx Adwsfk 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear Hsdpfx Adofci D Aewsfk --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: good (used), Good, used condition Main motor: 11 kW Maximum throughput: 200 kg/h Year of manufacture: 12/2008 / Technically tested: 01/2025 Briquettes: 150x60 mm . *Used machine, purchased as is Functional guarantee upon delivery Hfsdpfxet Hxudo Adwek

Condition: good (used), Technical data: Briquetting press RUF RB 440 Hsdpst H D Ezsfx Adwsfk Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Length: 40 - 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: reconditioned (used), Year of construction: 2023, All wear parts are new. Only 704 operating hours. Special price for a lightly used demonstration unit. Base machine: €29,990 net. Hjdpfod N Dnhox Adwsfk Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality during continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compaction via sliding plate. Main press cylinder. Vertical cylinder. . Level sensor: yes. . Requirements for the raw material: - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg. - The feed material must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Hodpfoffh Atjx Adwjfk Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *available upon request New: With the frequency converter option, up to a maximum of 45% can be eligible for government subsidies. Combination of: mütek briquetting press MPP 60 + dust extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical data of the briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Hodpfx Adod Su Hxowsfk Briquet diameter: 50 mm Front socket: 50 mm Briquet stroke max.: 40 mm Briquet stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery is also possible in 2 parts Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Option: cooling of the press jaws: no Option: cooling of the hydraulic oil: yes Option: level monitoring: yes CE compliant 2. Technical data of the clean air dust extraction unit MMJET 350: Dust extraction connection diameter: 350 mm Motor: 11 kW Dust extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h Hedpfxowtdk Te Adwsfk *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: Hedpfxsd Nnwlj Adwofk + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hedpfx Aofhql Tsdwefk Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: good (used), Year of construction: 2001, Good, used condition Low operating hours (1,675 h) Motor: 11 kW Hjdpfx Aswcc D Rsdwjfk Pressure: adjustable up to a maximum of 250 bar Throughput: up to max. 220 kg/h Briquette size: 150x60 mm Press dimensions: approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: 500x1250x2120 mm (LxWxH) Weight approx. 3,000 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 76 / 2011, briquette diameter: 75 mm, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, We offer a COMAFER DIN 250 briquetting press in good condition, manufactured in 2011. Hedpfjy Uihaox Adwofk Cylinder with closed-loop oil cooling and cooler capacity: 100–250 kg/hour, depending on the material. Briquette diameter: 75 mm. cylindrical housing (ø1200) with inspection door, additional ring (sleeve) ø1200 / h930, pressing force approx. 1100 kg/cm2. 2 cylinders. Briquette cylinder ø 200 mm. pump motor (11 kW / 15 HP, 380 V, 50 Hz). Monobloc, self-centering, without tie rods for the round die. Electrical control panel with PLC, automatic and manual cycle. Shut-down mechanism with open die and die pressure gauge. Digital thermostat for oil temperature control, level switch to prevent oil leakage. Closed-loop oil cooling system (air/oil). Closed-loop cooler for die cooling (580 mm x 550 mm x 908, weight 56 kg). threading die for the production of long briquettes, uniform length briquettes, compliant with CE standards. dimensions: 2100 mm x 1350 mm x 1540 mm (height), weight: 1600 kg If you have any questions or require further information, please send us a message. Phone inquiries are available in Hungarian only.

Condition: like new (used), Year of construction: 2021, operating hours: 10,367 h, functionality: fully functional, RUF LIGNUM R2 briquetting system for sale in excellent technical condition. The machine has a low number of operating hours and is ready for immediate operation. No additional investment required. An ideal solution for companies looking to quickly start or expand briquette production. BASIC INFORMATION: Model: RUF LIGNUM R2 Year of manufacture: 2021 Operating hours: 10,367 h Left-hand version — material feed from the left side Condition: excellent, fully operational Availability: available immediately from Estonia, Saaremaa. MAIN TECHNICAL PARAMETERS: Capacity: up to 570 kg/h Main motor: 22 kW Pressing pressure: up to 300 bar Siemens PLC control system Machine dimensions (L × W × H): 2900 × 2000 × 2100 mm Machine weight: 3,800 kg Briquette size: 150 × 60 mm Required material moisture content: up to 15% EQUIPMENT INCLUDED: Material feeding hopper Pre-compression system 45° briquette discharge chute Connection for extraction system Full documentation ADVANTAGES: Energy-efficient RUF press model Hsdpfx Aszapddedwefk Hydraulic oil tank heating and control cabinet heating for operation in unheated production facilities Suitable for continuous 24/7 operation Low operating and maintenance costs Suitable for various types of wood waste PRICE: €50,000 excl. VAT