Used Broom Vacuum Cleaner for sale (4,189)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, overall weight: 250 kg, Technical data: Product number WV 1500 B 001 Fjdpswtd Npofx Adaopd Year of production 2010 Efficiency 1500 m3/h MAX vacuum 0.4 mbar Booster pump must work together with an oil pump with 2-3 times lower efficiency Device after major service, ready to work New seals and bearings, New oil Reaches a vacuum of 0.4 mbar

Condition: ready for operation (used), Year of construction: 2009, Technical data: Product number: WV 1500 C 001 Year of manufacture: 2009 Capacity: 1500 m3/h Maximum vacuum: 0.4 mbar The booster pump must operate together with an oil-sealed pump with 2-3 times lower capacity. Fedexdvuispfx Adaopd Device after major overhaul, ready for operation. New seals and bearings, new oil. Achieves vacuum of 0.4 mbar.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 1,200 kg, volume flow: 1,000 m³/h, final pressure: 4 bar, Technical data: Product number RA 1000 B Year of manufacture 2004 Motor power 22 kW Capacity 1000 m3/h Max. vacuum 4 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 1200 kg Dimensions [H x L x W] 1611 x 981 x 1310 mm The pump achieves a vacuum of 4 mbar as confirmed by the sensor measurement in the video attached below. After service New oil Fsdpfx Adoyc Ht Ieaepd New oil filter New exhaust separators Oil rotary vane vacuum pump, suction device – a device used in technology for the removal of gases (creation of vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Ultimate pressure (the lowest pressure that can be achieved with this pump), Pumping speed and dependence of this speed on pressure, Capacity (usually measured in m3 of pumped gas per unit time).

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Technical Data Product number VS 20 RH Year of manufacture 2008 Fsdpfx Adswri Uzeaepd Chamber size 920x550x280 mm Sealing bar length 1 x 920 mm and 1 x 680 mm Efficiency for packages 1-3 / min Weight: 450 kg Power supply 400V 5N Cryovac belt vacuum machine, model VS20RH, serial number SN01016, year of manufacture 2008, 400 V, 50 Hz, 40 A, 13 kW, belt width 500 mm, seal length 960 mm and 680 mm, chamber dimensions 990 mm x 550 mm The Cryovac automatic belt vacuum packer is designed for packing fresh meat, meat products and cheese for further industrial processing. The machine has a simple and solid construction. Designed with ergonomic safety and hygiene requirements in mind, the machine is easy to use, clean and maintain. Machine after major service New vacuum sensor The machine achieves a vacuum of 1 mBar in the chamber, i.e. 99.9% vacuum

Condition: new, NEW ! PLC control with 50 programs loading : max. 160L with vacuum pump “Busch” 21m³ 2,3 kW weight 380 kg Fedpeytn Sgefx Adaopd dimensions (l x w x h) : ± 1.320 x 1.380 x 1.540 mm adjustable speed from 2 up to 9 rpm a wide variety of products like: all kinds of salads, meat and fish, can be mixed / tumbled with the Bartumb.

Condition: used, functionality: fully functional, machine/vehicle number: 3081454316, This is a vacuum packaging machine from the manufacturer Komet, model PlusVac 20, tabletop unit. The vacuum machine is in very well-maintained condition. The unit has undergone a thorough inspection in our in-house workshop (motor flushing and new pump oil applied). The following parts have been replaced: counter pressure bar of the sealing beam, air separator, lid gasket, lifting cylinder, overhauled sealing beam, replacement of sealing wires, and renewal of Teflon tape. The device is fully functional. You will receive an invoice with VAT shown separately. This unit is made of stainless steel—robust and reliable. The machine is equipped with a plexiglass lid, electronic control, and vacuum stop button. It features a double-wire sealing bar with a sealing length of 405 mm. The maximum bag size is approx. 400 x 500 mm, and the chamber size is approx. 430 x 505 x 175 mm. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective components, excluding installation and removal costs - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible options for shipping or self-collection - Competent advice before and after purchase - Provision of user manuals, wiring diagrams & spare parts - DGUV V3 testing Technical Data: W x D x H: approx. 485 x 615 x 400 mm Electrical connection: V: 400 / kW: 1.078 / A: 3.487 / Hz: 50 Weight: approx. 62 kg Machine No.: 3081454316 Chamber size (W x L x H / mm): 430 x 505 x 175 Control: Standard Comfort, optional Perfect Sealing length (mm): 1 x 405 (2 x 405) Sealing bar length (mm): 420 Double sealing Distance x (y) (mm): 455 (400) Sealing bar position: Standard front, optional rear Fpjdpfsxpxbpsx Adaed Pump capacity (cbm/h): 21 Power supply: 400V / 3Ph+N+PE / 50Hz Power rating (kW): 1.1 Max. bag size (mm): 400 x 500 Insert plates: 2 External dimensions (lid closed / W x D x H mm): 480 x 655 x 385 External dimensions (lid open / W x D x H mm): 480 x 655 x 920 Condition: Used, inspected, fully functional Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have questions, need advice, or wish to view the machine on site? We are available by phone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our General Terms and Conditions (GTC).

Condition: good (used), Vacuum Casting / RIM Inventory: Complete foundry section including vacuum casting systems (service partner available), drying ovens, and more (Foundry Inventory System V001AD17112025): - 1x Memmert Universal and Drying Oven UF750plus, large (S6) - 1x Memmert Universal and Drying Oven UF750plus, large (S7) - 1x Memmert Universal and Drying Oven ULP700, medium (S8) - 1x Memmert Universal and Drying Oven UE500, small (S5) - 1x MCP/HEK Vacuum Casting System, large, with 1x Schüchl differential pressure unit (S3+S4) - 1x UNIPRE M10 RIM Metering and Mixing Unit, year of manufacture 1997 (S9) - 1x Tartler RIM System, type MDM6, year of manufacture 2014 (S10) - 1x Tartler Silicone Metering and Mixing Unit, Tardosil 200, year of manufacture 1999 (S12) - 1x Schüchl Vacuum Casting System UHG-400, year of manufacture 1998, small (S1) - 1x MCP/HEK Vacuum Casting System Type C001, year of manufacture 1995, medium (S2) - 1x MCP/HEK Vacuum Casting System Type 004 PLC, year of manufacture 2000, large (S3) Accessories: - 1x Ziegler 631.5 81 transport trolley / pallet truck, year of manufacture 1997 (S11) - 1x Pfaff Type 4600011 pallet truck, year of manufacture 2000, small, 0/71/27663-0015 (S14) - 1x Pfaff Type 4600011 pallet truck, year of manufacture 2000, small, 0/71/3199-0029 (S15) - 1x Jungheinrich TF30 pallet truck, small, year of manufacture 2011F, SN: 56102106/033T (S16) - 1x Kern scale, large, FCB 6KO.5, SN: WD170053528 (S17) Fpedpfx Aoyrgy Hedasd - 1x Kern scale, small, SN: WC0782681 (S18) - 1x suction funnel incl. motor (S19) - 2 steel cabinets (S20) - 1x ESTA extraction arm (S13) - 3 workbenches with stainless steel surfaces - 2 workshop chairs, 1 step ladder, various small tools.

Condition: used, functionality: fully functional, Ferwood Code: RU0008163 - Manufacturer Code: MM1252AVV3 - Condition: Used - Functionality: Fully operational - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 270KG - 120X80X80 Fjdpfxeyrpq Ij Adaepd

Condition: used, functionality: unexamined, Ferwood Code: RU0002544 - Manufacturer Code: VTLF 2.250/0-79.1 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer refurbishment services. Please contact us. 235KG 120X80X70 Fpodpfxsyrphto Adajd

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 2,310 mm, total width: 1,850 mm, total height: 2,250 mm, overall weight: 1,540 kg, input voltage: 400 V, power: 20 kW (27.19 HP), input current: 29 A, input frequency: 50 Hz, For sale: Handtmann HVF 660 high-vacuum filler with vacuum hopper and automatic loading system. The machine is designed for the production of high-quality meat products—including cooked sausages, cured products, and ham. TECHNICAL DATA & SPECIFICATION - Filling pump capacity: up to 10,200 kg/h (170 l/min) - Main drive: 13 kW AC servo motor (24 kW with grinder attachment) Fpjdpfoyrqg Dsx Adajd - Filling pressure: 40 bar - Series 3 vane cell pump with a 14-vane, bolted rotor and “C” series vanes - 350 l hopper with sliding lid. The hopper is manufactured with vacuum technology and connects to a separate 100 m³/h vacuum pump; equipped with a dual-arm feed auger with independent AC servo drive - Integrated main vacuum pump: 40 m³/h - PLC controller (Monitor Control) with 12” color touchscreen (Polish language support); protective cover included - Integrated fill weight compensation system—Handtmann patented technology available exclusively in their fillers! - Includes an additional, free-standing loader hopper type 695 (450 l, with cleaning ball), connected to the filler hopper by 250/200 mm pipework; two inspection steps - Compatible with 200 l trolley loader (type AHV 83-6/200) for seamless operation with loader hopper 695 (independent lift control) - Tool trolley type 449-02 - Sausage meat level sensor in the filler hopper - Two external control sockets: X30 and X31 - Power supply: 380-440 V - Portioning range: 100 – 100,000 g - Easily accessible USB port for convenient software copy/download - HVF 660 unit dimensions (net weight): 1,540 kg, dimensions: 2310 x 1850 x 2250 mm - Loader hopper 695 dimensions with AHV loader (net weight): 590 kg, dimensions: 212 x 160 x 225 cm SET INCLUDES: 1x HVF 660 (filling and portioning) 2x Vacuum hopper with integrated 100 m³ vacuum pump 3x Loader hopper 695, 450 l (with cleaning ball and scraper) 4x 250 mm pipe connection 5x 200 l trolley loader, type AHV 83-6/200 6x Level sensor for automatic hopper loading 7x Bolted rotor 8x Grinder attachment drive 9x Grinder attachment GD 93-3 (filling and portioning) 10x Automatic separation unit for grinder attachment Net total price: For questions or further information, please send a message or contact us by phone. Krzysztof Żakowicz

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Fpjdpfoxgq I Nox Adasd Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Fsdpfx Adoxgr Rfoaopd

Condition: refurbished (used), Dry cleaner/ Friction cleaner Fpedpjxgtrqofx Adaed with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Fpedpfxjxgttze Adajd

Condition: used, Dry cleaner/ Friction cleaner Fjdpfexgq Sbox Adajpd with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1000W LCH-1000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Fpjdpjthithofx Adaod Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1500W LCH-1500-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Fpjdpfx Adethitpjasd Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Fedothittepfx Adaopd Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 2000W LCH-2000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Fpsdpfx Ader Eqbyoasd Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, NEW ! all stainless steel loading : max. ± 500 kg (depending on the product) PLC control with 50 programs adjustable speed from 0 up to 9 rpm with vacuum pump Büsch Fsdpfx Aeyr Ewkedajpd with water filter dimensions (l x w x h) : ± 2.550 x 1.300 x 1.650 mm

Condition: used, Used dissolver by Drais (DE) model RN 3-45 AS VAC. Contact parts designed in carbon steel. Machine is designed for work on vacuum. Mixer has single shaft with working length 105 cm and toothed disc with diameter 690 mm. Shaft is driven by el motor 45 kW, 1460 rpm, 400/690 V, 50 Hz. Working rotation of shaft up to 600 rpm. Mixer has also side wall scrapper, driven by el motor 1.5 kW, 1410 rpm, 440 V, 50 Hz and gearbox. Working rotation of scrapper up to 26 rpm. Machine has top cover and mixing pan with total volume 2000 l. Mixing pan has internal diameter 1465 mm x length of straight side of wall 1160 mm. Mixing pan has two side wall discharge outlets with valves, and bottom supports for work with forklift. Dissolver is rised/lowered hydraulically. Rise up to 145 cm. Hydraulic pack is driven by el. motor 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Mixer is equipped with vacuum pump by Tepro (PL) and local control panel. Last time used in chemical industry. Fsdpfjykn U Nsx Adajpd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3460x1000x2400 mm Number of filters 73 St. Number of dust containers 4 St. Fpsdpfxjw Nblro Adaod Weight 410 kg 355 mm 520 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x2100x2150 mm Fpodpfxsvz Erpe Adaod Weight 300 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1400x2000 mm Weight 137 kg Total power requirement 3 kw Fpodpfxjvz Eine Adajd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x3000x2200 mm Weight 450 kg Fedpfx Asvz Eh Dsdaepd Total power requirement 11 kw