Used Vacuum Dry Chamber for sale (8,679)

Year of construction: 1994, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 285, Year of construction: 1994 Tjdpfowptntsx Ac Nof Total stacking volume: 28 m³ Stack length: 9,200 mm Stack width: 1,800 mm Stack height: 1,700 mm Max input width: 1,800 mm Ventilation: longitudinal Number of fans: 4 Weight approx.: 9-10 tons Extensive welding work has already been carried out on the chamber. The floor has been renewed over its entire length. The substance of the chamber is therefore very good. The technology needs to be checked. We bought the chamber for our own use, but never put it into operation as our drying needs have increased in the meantime and we now have a significantly larger chamber. The control system was temporarily powered on at the time of purchase. The displays and the four fans function. The vacuum pump is defective. However, another pump from Busch is included. Transport is possible with a normal semi-trailer (open at the top). Loading by truck crane is included in the price. Price is net. Location is 16356 Werneuchen.

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Todpfx Asxgdrbjc Njf

Condition: used, No. 3221 Vacuum dryer / drying chamber DWT / IWT MD 2600 x 13000 Used The machine is still connected to power and heating, but has not been used for 3 years Dryer diameter 2600 mm Dryer length 13000 mm Package length 13000 mm Package width 1200 mm Package height 2100 mm Gross capacity 33 m3 Net capacity 20 m3 sawn timber or 15 m3 logs Todpfx Acowiw Eve Nof Electrical connection 44 kW Electrical consumption 15 kW/h Water drain 50 mm Water connection 25 mm Heat connection 87 kW, 85 °C hot water at the dryer Heat consumption 500 kcal per liter of moisture or 0.6 kW per liter of moisture Including BUDERUS B305/160 boiler, heat output 141 - 160 kW The boiler is operated with natural gas The system is supplied as a fully assembled unit Boiler cylindrical on 3 supports Hydraulic, fully automatic boiler lock Boiler material solid stainless steel to DIN, x5 Cr Ni 189 150 mm insulation, clad with 1 mm galvanized sheet steel Rails in stainless steel, spacing 600 mm 1 rail bridge in front of the boiler 4 trolleys for loading and unloading, length 3200 mm each 12 fans with Siemens motors, 2 spare motors Heating coil as stainless steel finned tubes with aluminum fins, length 150 m, surface 250 m2, diameter 25 mm Flow and return pipe diameter 80 mm Heating medium 85 °C Hot water at the consumer Circulation pump capacity 75 m3/h Vacuum pump BUSCH LX 0260 B, year of construction 2013 Nominal suction capacity min. 200 m³/h / max. 455 m³/h / final pressure 33 hPa (mbar) 1 electric condenser for condensing the vapor 3 fans for cooling or condensing the vapors PLC control Tracks in front of the dryer 14000 x 600 mm The entire system stands on a concrete floor and can be lifted with a crane and loaded onto trucks Transport dimensions approx. 18000 mm long, 3050 mm high (without cooling system) Sale on behalf of the customer, ex location near 09131 Chemnitz, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) Tedpfx Acjvc Axpj Njf - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Tedpfou Tipksx Ac Nof Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 80 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us. Todpfjftzkqsx Ac Nof

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Todpeftzhnofx Ac Nef Nominal flow: 140 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Rotary dry vane vacuum pump model MVS-V250. Available in stock. Completely new with 12 months warranty. Nominal flow: 250 m3 / h at 50Hz. Final vacuum: 200 mbar Tsdpfx Aceftzvij Nsf Any clarification, do not hesitate to contact us.

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Tsdpfxjxz Dv No Ac Nsf Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development • High gas load applications • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2012, Technical Data Product number: C300 Year of manufacture: 2012 Chamber dimensions: 450x470x160 mm Sealing bar length: 1 x 450 mm Packaging output: 1-3 / min Weight: 150 kg Power supply: 400V 5N Multivac C 300 Vacuum Machine MAP and GAS packaging capability Machine equipped with a wire for trimming excess film Tedpfx Acjxdvr Us Njf The automatic Multivac vacuum packer is designed for packaging of fresh meat, meat products, and cheese intended for further industrial processing. The machine features a simple and robust construction. Designed with ergonomic, safety, and hygiene requirements in mind, it is easy to operate, clean and maintain. Machine after full overhaul New vacuum valve Pump refurbished The machine achieves a vacuum of 1 mBar in the chamber, i.e., 99.9% vacuum.

Condition: used, mileage: 16,000 km, Year of construction: 2023, Serial number: YS2P6X2000569xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21031 Chassis: Scania P320 6x2*4 (steerable tag axle) Engine: 320 hp, 9,000 ccm, 6-cylinder, Euro 6 Cab type: CP14L Wheelbase: 3,550 mm Allison GA866 automatic transmission Air suspension front and rear Black leather seats Scania Infotainment Premium Gearbox and engine PTO Body: Terberg Viking Dual-Chamber Total volume: 17.2 m³ Left chamber: 11.2 m³ Right chamber: 6 m³ Fully automatic bin lifter Prepared for dynamic weighing and RFID on chamber Control panels on both sides (rear) Pick-up function for bins Compatible with: 140–1000 L bins on wide side 140–360 L bins on narrow side (can be equipped for 660 L or split bins) Can empty split bins 2 LED rotating warning lights (rear, with guards) LED tail lights Cycle time: 2-wheel bins: max 8 sec 4-wheel bins: 12–15 sec Hydraulically operated tailgate Auto lift of seal strip during reversing or speeds > 7 km/h Auto-retractable step with handhold (right side) Integrated underrun protection Separate hydraulic systems for each chamber Color: White Includes broom and shovel Km: 16000 HK: 319 Technical approved: Yes EU-approved until: 20.12.2025 Own weight: 18100 Tsdpfx Acew Ia D Re Nsf Total Weight: 27000 Payload: 8825 Width: 253 Length: 948 Model: P320 Gearbox: Automatic

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Tsdpfjikq Tyjx Ac Nef Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: excellent (used), Year of construction: 2019, Wheelabrator MRV D1 TAD Rumbler With Delta Touchscreen & lavor ashley kombo Wet & Dry Vacuum Cleaner Tsdex Agukepfx Ac Njf S/No. 20525 (2019).

Condition: used, VACUUM DRY KILN for massive wood second han machine volume: 10 m3 diameter: 150 cm n.12 aluminum plates with loading trolley machine overall dimensions: Tsdpfx Acexxladj Njf total length: cm.630 width: cm.185 weight: kg.3000

Condition: excellent (used), Here we offer a Busch dry scroll vacuum pump. Tsdpfx Acsq Ebk Hj Nsf Busch dry scroll vacuum pump Type: FO 0030 B 0110..ZZ Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Technical Data Product number VS 20 RH Year of manufacture 2008 Chamber size 920x550x280 mm Sealing bar length 1 x 920 mm and 1 x 680 mm Efficiency for packages 1-3 / min Weight: 450 kg Power supply 400V 5N Cryovac belt vacuum machine, model VS20RH, serial number SN01016, year of manufacture 2008, 400 V, 50 Hz, 40 A, 13 kW, belt width 500 mm, seal length 960 mm and 680 mm, chamber dimensions 990 mm x 550 mm The Cryovac automatic belt vacuum packer is designed for packing fresh meat, meat products and cheese for further industrial processing. The machine has a simple and solid construction. Designed with ergonomic safety and hygiene requirements in mind, the machine is easy to use, clean and maintain. Todjwri Uzepfx Ac Njf Machine after major service New vacuum sensor The machine achieves a vacuum of 1 mBar in the chamber, i.e. 99.9% vacuum

Condition: used, REF: MM6311 Turbovac / HFE Vacuum Systems bv mobile single-chamber vacuum packing machine. Supplied with 4 x spacer boards for different product heights. Model - SB-820. Serial number - 20081509. Date of manufacture - 2008. Sealing bars - 1 x 810mm long and 1 x 500mm long. Tjdpfxoxzdtzj Ac Nof Vacuum pump - Busch RA 0063 F 5K3. Electrical requirements - 380-400 V / 50 hz / 3 Phase. Power - 13 Amps. Overall dimensions - 910mm wide x 700mm deep/long x 1050mm high. Weight - 182kg.

Condition: not inspected (used), Lubot & Wakker Type: 1 pallet vacuum chamber Capacity: up to 2.000 Kg (6-8 charges) hr Completely stainless steel Todjfxyqrjpfx Ac Njf Dimensions chamber: L x W x H = 2.200 x 1.700 x 3.400 Weight: 1200Kg Electric: 380V 3P+N+E, 7,25Kw Compressed air: 6 bar Drinking water: 3 bar aprox. 1250 ltr/hr Features: Controll cabinet vacuümpump mix-tank water preparation Storage tank with pump valves etc as-is or tested and adjusted to customer choice

Condition: new, functionality: fully functional, machine/vehicle number: XDS35I, overall weight: 50 kg, volume flow: 44 m³/h, input voltage: 230 V, input frequency: 60 Hz, input current: 6 A, rotational speed (max.): 1,750 rpm, Unused Edwards XDS35i Dry Scroll Vacuum Pump in shipping packaging. Manufacturer: Edwards Model: XDS35i Tjdpfx Aoxrtr Uec Nef Voltage: 200-230V (6.6A | 50/60Hz) Weight: ~50kg Max displacement: 44 (m3/hr) Max pumping speed: 35 (m3/hr)

Condition: used, mileage: 9,61,000 km, power: 294 kW (399.73 HP), first registration: 12/1999, overall weight: 32,000 kg, fuel type: diesel, axle configuration: > 3 axles, gearing type: semi-automatic, emission class: euro2, Year of construction: 1999, Equipment: ABS, soot filter, Manufacturer Mercedes Model Actros 4140 8x4 KOKS MEGAVAC 8000 ADR 13.500 l. Rustfri stål Tørsuger Year 1999 Condition Good Serial Number WDB9523171K400980 Todsxpl S Uepfx Ac Njf Ref. nr. 547977 Reg. date: 12/31/1999 Hk: 400 Km: 961000 Gearbox: EPS 3 pedal automatic Eurotype: 2 + Particulate filter Diesel tank: 1 Tank liter: 500 Radio: ? Drum brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 385/65 - 315/80 - 315/80 Cover% left 50 - 50 - 40 - 40% Front suspension: Springs Suspension rear: Springs Rear axle, hub reduction: ? Toolbox: ? Hydraulic system: ? Total weight: 32000 kg. Net weight: 23200 kg. Load capacity 8800 kg. Manufacturer: KOKS Tank capacity: 13590 l. Vacuum pump: DEMAG - WITTIG SLS34 Vacuum pump timer: 15043

Condition: new, Here we offer a ULVAC dry vacuum pump. ULVAC Dry Vacuum Pump Solution for rough process pumps Dry vacuum pump ULVAC's unique approach to using latent heat in the pump body allows the LR / HR / UR series, performance even in the most stringent processes. ULVAC has continued its design efforts to maintain extremely uniform high temperature over all pump stages. and this pump family is optimized for CVD and etching applications. Compatible with ULVAC's ECO-SHOCK system for additional energy savings Properties The LR-Series pump is designed for charging valve chambers and PVD processes. ULVAC's unique aluminium design allows for very uniform temperature distribution throughout the pump body: The ULVAC LR-Series pump is designed for applications that require a heated pump, heated gas lines and/or heated exhaust pipes Excellent helium pumping capacity Canning motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high level of surface hardness and excellent corrosion resistance. This prevents the wear of internal pump parts when these corrosive gases are exposed. (Series LR) Todpfx Aod R U Etjc Nef Designed for process gases that produce powdered by-products, such as Si crystal growth furnaces Pre-pump for

Condition: used, Year of construction: 2022, machine/vehicle number: SN00015, 12 months warranty, except for the engine. Light signs of use. Todpfjw H R Tqox Ac Nsf

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 Tsdpfx Acoxn Rz Ej Nof 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Technical specification ⚙️ ✅ Model - ED 120. ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Year of construction: 2006, condition: good (used), Make: Pano Type: automatic 1 head dry vacuum closing machine Tjdpfeibba Rox Ac Njf Model: VKV-15 Serial number: 05-122 Construction year: 2006 Capacity: up to 1.200 jars per hour Frame: stainless steel 1.4301 (AISI 304) Power supply: 380 Volt – 50 Hz – 1,5 kW Features: stainless steel control cabinet excluding conveyor including rotating magnetic cap sorter including vacuum pump including safety housing as-is or adjusted to customer needs

Condition: used, functionality: unexamined, machine/vehicle number: AA40 WN, overall weight: 240 kg, volume flow: 42 m³/h, input voltage: 220 V, Used Ebara AA40 WN Dry Vacuum Pump Tedpfexlikmex Ac Nof Manufacturer: Ebara Model: AA40 WN Ultimate Pressure: 0.2 Pa Capacity: 4200 L/min Power: 200/220 Volt, 50/60 Hz (3Ph.) The Ebara AA40WN dry pumping system is a microprocessor-controlled, modular dry pump package that offers exceptional control and monitoring capabilities. The AA40WN pump system can be locally operated via a handheld or mounted LCD control panel.