Used Lacquer Sanding Machine for sale (65,438)

Condition: excellent (used), Catalog number: 8075 TECHNICAL DATA - Table length: 2200mm - Table width: 700mm - Main motor: 2.2kW - Manual beam lifting - Abrasive belt width: 160mm - Grinding head - Dust extraction nozzle diameter: 120mm - Overall dimensions (L/W/H): 3060x1240x1430mm Hedpfszuk Hujx Achonr - Weight: 250kg ADVANTAGES – Made in Austria – Unpainted – Used sander, very good condition Net price: 6500 PLN Net price: 1548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: used, Edge sanding machine Holzmann KOS2510, good condition, standard equipment, 2510 mm belt length, 150 kg Hedpfx Acjwzzf Rjhonr Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: used, Year of construction: 1987, Edge grinding machine Manufacturer: Rehnen Type: R1 Hnedpfx Acjzuzddshor Year of manufacture: approx. 1987 Technical data Work table: 1100 x 500 mm Grinding belt: 2280 x 150 mm 3 kW main motor 6.4 Amps Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW Hnjdjzuzctepfx Acher - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment Hnjdpfx Acjzuzb Ashor 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator Hnjdpfszuzbcex Achsr - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 1996, machine/vehicle number: A9611003/0100, Technical data: - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers Hedpfxoyyyhus Achsnr - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg

Condition: used, Year of construction: 1991, machine/vehicle number: 575, - Manufacturer: Fladder - Model: Gyro 300 Vacuum - Working width: 1300 mm - Year of manufacture: 1991, good condition - Flex Trim sanding heads - Quick-change sanding media - Sanding media grit: K240 - Sanding media length: 45 mm with support brushes - Abrasive slits: 20 and 5 mm - Number of brush heads: 6 - Rotating and oscillating sanding unit - Motor power: 5 kW - New frequency inverter for the conveyor belt - With vacuum conveyor belt - Feed rate: continuously adjustable from 2 to 8 m/min - Length: 2070 mm Hsdszia Nnjpfx Achjnr - Width: 2370 mm - Height: 2240 mm - Weight: 2300 kg - Location: In stock, D 32825 Blomberg - Volts, Hz: 400 / 50 - Can be tested in Blomberg

Condition: used, Year of construction: 2014, machine/vehicle number: 753.04.14, Equipment: Hsdpexrb Rfjfx Achenr - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 610082, Technical Data: - Manufacturer: Ernst - Type: BM 2 - 1300 - Year of Manufacture: 1998 - Max. brush width: 1,300 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motors: 2 × 5.5 kW - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30-350 rpm - Feed rate 3-15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse to be provided by the customer: 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm2). 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s Hnodpfjzubpaex Achjr - Vacuum at the exhaust connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg Hodpfextakmsx Achsnr - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Hnsdpoy Naq Uefx Achor Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Hnedewzzivopfx Acher Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: new, Package size: 5 pieces Holzprofi sanding belts, suitable for many different machines from all manufacturers! These top-quality sanding belts deliver excellent results when working with wood and various metals. Thanks to the fully synthetic resin-bonded, semi-open coating and the antistatic properties, they are particularly efficient and durable. Advantages: - High-quality sanding belts for professional use - Fully synthetic resin-bonded for long service life - Semi-open coating and antistatic for best sanding results - Extra-strong backing material for high resistance - Suitable for all types of wood and various metals High quality – Made in Austria! Areas of application: These belt sanding belts are ideal for carpenters, turners and DIY enthusiasts who need a reliable and powerful solution for their sanding work. The following lengths are available: 5900x150mm, suitable for Holzprofi Austria BS220, among others 6150x150mm, suitable for Holzprofi Austria BS220A, among others 6440x150mm, suitable for Holzprofi Austria BS250 and BS220B, among others 6800x150mm, suitable for Holzprofi Austria BS250A, among others 7000x150mm, suitable for Holzprofi Austria BS250B, among others Grit sizes: K40 K60 K80 K100 K120 K150 Prices from 12.00 euros Prices depend on length and design Hsdpfx Aezq Dfpochenr All other sizes are also possible! If you have any questions about the correct length for your machine, please contact us, we will be happy to help. Tel.: 00 43 7613 5600

Condition: used, functionality: fully functional, De Stefani MVT edge grinder 1 grinding unit Maximum workpiece height: 100mm Grinding unit motor: 2.5 kW Self-sharpening grinding unit Manual adjustment of the grinding unit Manual adjustment of the grinding unit angle Grinding unit with oscillation Feed speed adjustable via a variator Feed motor power: 0.74 kW Hnodpfxeznu D Rj Achor

Condition: used, Jet EHVS-80 cs lightweight edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: Hnodjzryxhjpfx Achjr - Sanding belt length: 2260 mm - Sanding belt width: 150 mm - Table: Swivelling - Motor power: 1.5 kW - Extraction connection: 100 mm

Condition: used, Technical data: Hnjdozryw Rjpfx Achor - Conveyor belt width: 150 mm - Motor: 3 kW - Weight: 490 kg

Year of construction: 1991, condition: used, weight 240 kg Hodpfsztfvbox Achsnr max 50 mm ja serial number 2035

Condition: new, Holzprofi Maker oscillating edge sander, a robust sanding machine for trades and industry: - Processed steel back plate - Graphite support - Table made of solid machine cast iron - Table height adjustable and grooved - 90° pivoting sanding head - Miter fence and rounding sanding table included as standard Technical data: Belt dimensions: 2260 x 150 mm Hjdjzqrwgepfx Achjnr Motor output S1: 2.2 kW, 400 V Table length: 750 mm Table width: 250 mm Belt speed: 16 m/sec Space requirement: 1325 x 570 mm Dust extraction connection: 100 mm Weight: 156 kg

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Equipment and technical data: - Can be operated from both sides with a flat and a contact sanding surface Hjdpszi Hagofx Achsnr - Sanding belt size 200 x 2000 mm - Belt drive motor 3 kW - Oscillating stroke programmable from 10-90 mm - Sanding head can be tilted motorically up to 45 degrees - CE compliant / dust tested Accessories: - Additional table with sanding rollers - Half-round table on the belt drive roller - Chassis LxWxH 1800x1000x1500 mm Weight 610 kg Location: in stock at warehouse 54634 Bitburg Availability: immediate

Condition: used, Year of construction: 2022, Belt width: 150 mm Hnsdezq Dczspfx Achsr Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: new, Number of sanding units 8 St. sanding width 25-240 mm Sanding height max. 15-140 mm B ROBA Fentech; Fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine sanding of wood - Sanding after impregnation - Intermediate lacquer sanding Advantages of the ROBA Fentech system: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm diameter sanding tools optimize sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a straight-through machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design - Freely selectable abrasive configuration from the MB Flex system. Brief overview of technical details (detailed description available upon request!): Workpiece length: max. unlimited, min. approx. 250 mm Workpiece width: 25–240 mm Workpiece height: 15–140 mm - Automatic, scanner-based workpiece detection at the machine infeed - 2.0 m infeed table - Driven vacuum transport system - 1x twin-spindle unit for right-side processing - 1x twin-spindle unit for left-side processing - 1x twin-spindle unit for processing from below - 1x swiveling twin-spindle unit for processing from above - 2.0 m outfeed table - Initial set of abrasives - Roba Fentech HMI (9" display, 400x400 housing, Siemens HMI) - Siemens control system - Electrical components: Klöckner Möller - Geared motor: Getriebebau Nord - Frequency converter: Schneider Electric - CE mark ----- Ex-works price upon request! Hsdpszqvn Ajfx Achenr Plus freight and commissioning NEW FEATURE: Fentech Standard optionally upgradeable to orbital sanding: The orbital sanders are installed in an extended housing section positioned ahead of the standard machine configuration. This allows us to combine the effective, scratch-free sanding action of the orbital sanders with the finish provided by the brushes. This ensures that the visible surfaces of the window profiles have a perfectly flat finish, completely free of raised wood fibers thanks to the subsequent brush sanding process. (Technical specifications provided by the manufacturer – subject to change!)

Condition: new, Number of sanding units 2 St. sanding width 100,150 mm Sanding height max. , B Roba Twin Flat ----- Bench-mounted brush belt sanding unit for fine wood sanding and intermediate lacquer sanding. The machine utilizes two brush belt sanding units, with the sanding mechanism of the right and left units each facing outwards. This prevents—particularly during intermediate lacquer sanding— the risk of sanding through the edges. Two support rollers are located between the two units, facilitating the handling of long workpieces. Machine configuration: 1 Welded steel base frame 1 Work table – dimensions: 3100 mm x 600 mm x 850 mm 2 Brush belt sanding units Two sanding zones, each featuring 122 sanding segments that are easily replaceable via a plug-in system. Available abrasive trim heights: 30 / 45 / 60 / 75 mm (Machine supplied with initial abrasive setup according to customer specifications) Drive via geared motor: 2 x 1.1 kW Working width of sanding zone 1: 100 mm Working width of sanding zone 2: 150 mm Working length of sanding belt: approx. 2 x 1150 mm Sanding zone integrated into the table. Sanding belt speed: 60 m/min – 230 m/min, electronically continuously variable. Extraction ports: 3 x 100 mm Equipment features: Central control and switch cabinet IP 54 rated. Electrical components: Klöckner Möller Geared motors: Getriebebau Nord Frequency converters: Schneider Electric Connected load: 3.0 kW Operating voltage: 230/400 V, 50 Hz, 3-phase/N Machine finish: RAL 7035 / RAL 5018 Standards: CE mark Working range: max. 100 mm / 150 mm Working height: 850 mm +/- 50 mm Machine length: approx. 3100 mm Machine width: approx. 600 mm Machine weight: approx. 400 kg Plus pallet for truck transport (Twin Flat): 175.00 EUR plus VAT OPTION Roba Twin Flat FR (for sashes that are already pressed): ----- See the last 3 images; price on request! (Technical data per manufacturer – subject to change/no liability assumed) Hsdezqvnvjpfx Achsnr

Condition: new, Number of sanding units 10 St. sanding width 25-240 mm Sanding height max. 15-140 mm MB ROBA Fentech ORBITAL, fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine wood sanding - Impregnation sanding - Intermediate lacquer sanding Advantages of the ROBA Fentech principle: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm sanding tool diameter optimizes sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a through-feed machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design - Freely selectable abrasive configuration from the MB Flex System. Brief overview of technical details (detailed description available upon request!): Workpiece length: max. unlimited, min. approx. 250 mm Workpiece width: 25–240 mm Workpiece height: 15–140 mm - Automatic, scanner-based workpiece detection at machine infeed - 2.0 m infeed table - Driven vacuum transport system - 1x Twin orbital sanding unit for right-side processing - 1x Twin orbital sanding unit for left-side processing - 1x Twin-spindle unit for right-side processing - 1x Twin-spindle unit for left-side processing - 1x Twin-spindle unit for processing from below - 1x Twin-spindle tilting unit for processing from above - 2.0 m outfeed table - Initial set of abrasives Hjdpfx Aszqvnpjchjnr - Roba Fentech HMI (9" display, 400x400 housing, Siemens HMI) - Siemens control system - Electrical components: Klöckner Möller - Geared motor: Getriebebau Nord - Frequency converter: Schneider Electric - CE mark ----- Ex-works price upon request! Plus freight and commissioning (Technical specifications provided by the manufacturer – subject to change/without guarantee!)

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hodpfjywlfyjx Achsnr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels