Used Business Color Mist Extraction for sale (15,413)

Condition: excellent (used), Mobile paint mist extraction unit With side air baffles Built-in fan Nodstk H Nyjpfx Abysdd

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Nedpfx Aevvizkjbyedd

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Ndodpfobumr Sjx Abysd Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Year of construction: 2008, condition: good (used), Paint mist extraction wall with sprayer Nedpfx Abshu E A Teyodd Item number: MA 1127 width: 2050 mm length: 900 mm Height: 2100 mm ( total height 2600 mm) Connected load: 380 V Spray booth width: 1250 mm depth: 1000 mm height: 2550 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: FA078750, volume flow: 7,000 m³/h, total length: 2,500 mm, total height: 1,500 mm, total width: 900 mm, nominal power: 2.2 kW (2.99 HP), extraction nozzle diameter: 350 mm, intake manifold diameter: 350 mm, Paint mist extraction wall with dry separation Series: NESTRO NFW 2515 - Used (very little – in a diaconal institution) - Year of manufacture: 2009 - For efficient spray booth ventilation and paint mist extraction - Two-stage baffle plates - Dry after-filter - Two side deflector plates (2x 500 mm) - Including exhaust ductwork (see photo) Ndjdpsxvimpofx Abyjd - Including spray gun holder and automatic activation The extraction system can be inspected and tested at any time at our site in Chemnitz.

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Nedpfowv Nbcox Abyodd Power consumption: 2.3 A Weight: approx. 120 kg

Condition: excellent (used), Unit with supply air heating in excellent condition Ndsdpfx Absxpg Dxoysd

Condition: good (used), Gescha extraction system, very well maintained, suitable for spray mist and dust, equipped with a single-stage switch. Mounted on lockable castors for easy mobility. Can be shipped via freight carrier (price upon request). The Gescha extraction system is a premium solution for your woodworking shop, carpentry, and spray painting applications. It provides efficient and safe extraction of wood dust and paint particles, improving air quality and protecting health. This system is ideal for small to medium-sized workshops, offering reliable performance and user-friendly operation. Its robust construction and straightforward installation allow for quick and hassle-free commissioning. Ndedpext U Rnofx Abyod

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Airflow capacity approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Prefilter F5 2. Centrifugal separator 3. Post filter F5 (optional: HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9); optional HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (similar to WS2 model) Accessories & Features • Compact design for mounting directly on or beside CNC machines • Stand for extraction • Three-stage filtration for efficient oil and emulsion mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low-noise operation, and long-life filter elements Ndodpfxjxl U Dle Abyed Subject to alteration and error in the technical data and information, as well as prior sale!

Condition: ready for operation (used), Year of construction: 1998, Spray booth / Rippert paint system, fully functional, removed from school operation (WIFI) Manufacturer: Rippert Type: Spray booth / paint system with extraction, control unit, supply air, and heating register Airflow capacity: approx. 10,800 m³/h Design: Extraction/filter system with ductwork and control cabinet control Condition: well-maintained, functional, available dismantled Ndjdpfx Abjxp I Ufoyod Plans and documentation available Equipment: - High-quality paint application and extraction system from the German premium manufacturer Rippert - Extraction and filter unit with pressure gauge and maintenance hatches - Piping and valve system (galvanized steel, DN connections) - Control cabinet with controls, emergency stop, operation indicators, and operating elements - Heating register - Compact, robust construction for continuous industrial use - Explosion-proof lights (EX) - Explosion-proof fire markers (EX) Application areas: - Wood and furniture industry - Metalworking (e.g. machine or vehicle parts) - Coating of plastic parts - General industrial and craft applications Technical data (according to nameplate/manufacturer specifications): Airflow capacity: 10,800 m³/h Manufacturer: Rippert

Condition: used, Year of construction: 2023, functionality: fully functional, For sale due to purchase of a larger system! Was only in operation for 1 year and was covered with cardboard. See photos. Ndodpfxextucde Abyjd

Condition: good (used), Motor : 1.5 kW Njdpfxshc Sype Abysdd Quantity : 2 pieces Price/ piece

Condition: used, Year of construction: 2015, operating hours: 5,231 h, functionality: fully functional, machine/vehicle number: 2015019, type of input current: three-phase, overall weight: 1,590 kg, input voltage: 400 V, total width: 1,756 mm, total length: 2,066 mm, total height: 3,643 mm, power: 15 kW (20.39 HP), input frequency: 50 Hz, Equipment: oil mist separator, type plate available, Oil mist extraction from the workshop, plug & play filter tower for extraction during emissions of coolant lubricants in production halls. Nodpsxqf Hzjfx Abyjdd Filter ventilation tower IVAT Air FTower 20,000M. Ideal for aerosols, oil mist, emulsion mist and vapors. Industrial hall filtration ventilation – suitable for various technical manufacturing processes in production facilities, primarily in metalworking. In many cases, the extraction systems installed directly on machines for coolant recovery are either insufficiently efficient or not installed at all. Setup operations on machine tools, frequent opening of machine enclosures, or missing covers on machining heads can result in oil mist escaping from the machine area and reaching work zones, where employees are exposed to harmful mists and vapors. Installing a ventilation tower significantly improves air quality at workstations and should be considered the ideal complement to industrial hall filtration ventilation – especially where complete separation of oil mist via coolant recovery systems is either not possible or difficult to implement. Includes automatic room air and temperature monitoring. An innovative PLC control system compares sensor data and detects any exceedance of thresholds at workstations or increased temperature directly at the hall ceiling, then fully automatically regulates temperature and air quality. Filters are barely used, see images. Price ex works, pick-up only.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,550 h, functionality: fully functional, Paint mist extraction wall with dry separator Complete supply air system with exhaust, control cabinet, lighting, and piping inside and outside Hot water heating coil Spray booth control with touchscreen 2 x 2.0 kW drive power 6000 m³/h air volume flow Ndsdpfxsxltm Ss Abysd Year of manufacture 2011 From carpenter workshop closure / retirement, IN GOOD CONDITION ex workshop

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm Ndodpfx Abjumvtqsysd - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Condition: ready for operation (used), functionality: fully functional, Paint mist extraction with supply air system Manufacturer: Späne Paint mist extraction wall Spänex TAW 220 Ndsdoxl Um Tspfx Abysd Air volume 6,000 m³/h, motor power 1.35 kW Exhaust pipe diameter 400 mm Baffle wall area 2000 mm x 1900 mm Extraction wall depth 800 mm Supply air unit with heating coil Spänex WK 61 for paint booth ventilation cassette-type design Air volume 6,000 m³/h, motor power 2.5 kW Heating medium: hot water 90/70°C Thermal output 77 kW Supply air duct components Filter outlet ceiling 1900 mm x 1900 mm x 300 mm Connection bends, duct elbows Control and regulation cabinet For supply air unit and paint mist extraction Already dismantled and ready for loading

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-1427, Offer 24500 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 28,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 6 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg Nodpfx Abewdvtheyjdd - Operating hours readout 11,216 h

Condition: ready for operation (used), OIL MIST EXTRACTION, CENTRIFUGAL OIL MIST EXTRACTION, EONAG 3000 Used machine Manufacturer: Innovations-Center Type: Eonag 3000 Year of manufacture: 2012 Enclosure dimensions: 1000 x 570 x 1750 mm Ndodou Nu Rhepfx Abysd Electrical data: 400 V; 50 Hz - 4000 m³/h - 84 dBA - 2800 l/min

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) Njdpfxjwv T R Uo Abyjdd - Individually adaptable with a wide range of accessories

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm Ndsdev I Tfdopfx Abyjd - Weight approx. 500 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications - Upright design for extracting welding mist and grinding dust Ndsdpswd Nlkjfx Abyjd - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW Ndjdpfx Absu Aafdsyod - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA approved welding extractor - Articulated extraction arm 3000 mm - air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - filter area approx. m² - filter control light for filter change - separation efficiency 99,9 - compressed air connection 6 bar Ndodehw Ev Sspfx Abyod - drive - fan 400 V / 1,5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Technical data: - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa Ndsdswqdycepfx Abyod - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 9501441040100301, Offer 24469 Welding mist filter system with spark pre-separator + extraction arms Njdpfx Aouwl Dusbyedd Technical data - Vertical version for filtering welding fumes + grinding dusts, - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with - chromium + nickel content of over 30% - Exhaust air can be discharged into the work area, e.g. for heating or outside - can be - TEKA control unit - Air volume flow up to approx. 4000 m³/h - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning system with separation efficiency > 99 % - Separate control cabinet - Connection 400 V / 4 kW - Space requirement Filtercube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg - Separate spark pre-separator make TEKA type FVS 4000 - 6000 - Space requirement spark separator W 850 x H 1650 x D 950 mm - 3 articulated extraction arms - Pipework