Used 5 colors for sale (17,169)

Listing

Request more images Request more images Already requested

13

Deutschland

6,760 km

5 colors

Heidelberg Speedmaster 74 5P3HLX -AxisControl

Price info Price info Already requested Call

Condition: used, Year of construction: 2010, approx. 176 million prints 530 x 740 mm (20×29″), PressCenter, AxisControl, Alcolor, Autoplate, extended delivery, Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device, high pile delivery, separate coating unit with chamber doctor blade system, IR dryer, AirStar, inking unit temperature control, perfecting 2/3, antistatic device, scale feeder, powder device, available at short-notice Dmk70p

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

D- Nordrhein-Westfalen

6,955 km

5 Colors

Mitsubishi Diamond 3000 S -5

Price info Price info Already requested Call

Condition: used, Year of construction: 2005, Size: 720 x 1020 mm Impression: 300 Mio. Equipments: IPC II Intelligent Press Control high speed separator Refrigeration & Recirculation System Grafix Digitronic powder device SAPC semi automatic plate changer Gshge7bcw Non-Stop Feeder wash device for impression cylinders Plate Cylinder Cocking blanket wash up device: autom. Mitsubishi Delta Dampenin

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Österreich

6,437 km

offset printing press 5 colors

Komori 528+L + UV

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2003, Komori L 528 + C+ UV Year: 2003 187 mio imp Max. Size 520 x720 mm PQC print quality system CMS MONOTORING system Plate cylinder tilt adjustment COCKING Chrome plate cylinders Chrome-plated PQC cylinders S-APC semi-automatic plate changing Automatic ink roller cleaning system Bhmpg9d8si Automatic blanket washing device Cardboard printing device up to 0.8 mm UV equipment: Chrome blanket cylinder Eltosch UV drying system 2 UV dryers - on dryer units 1 x installed between 1st and 2nd printing unit 1 x installed between the 5th printing unit and coating unit, each combined with a cooling section 1 UV end dryer in plug-in module technology installed in the extension combined with a cooling section Shadow-reduced gripper system Special UV-resistant inking and dampening rollers made by BÖTTCHER Air conditioning units for cooling sections for sheet cooling for intermediate and final dryers Inter Deck - Special coating of the entire inside of the machine as protection against oxidation UV varnish pump Technotrans combination inking unit cooling system for dampening solution processing and inking unit cooling IRS sword thermometer for stack temp. monitoring KomoriMatic alcohol dampening units with cooling and alcohol dosing system with delta rollers Divided quick-release plate rails Register system KPS 3 in the BACHER system Automatic cylinder positioning system Circumferential and lateral plate cylinder adjustment Roller washing device Gripper height adjustment for transfer cylinder to switch from paper Supersensonic sheet sensor • Gripper modified for PVC printing • Druma modification for PVC printing • Raising the machine by 300 mm • Swing gripper PVC - modified • ISOLOK - anti-vibration pads • ELTEX additional ionization device on the feeder Computer for KMS system • Pressure sprayer Weko T 77 C • Color Matching Light for PQC Control Panel • Hatchet pressure plate punch standing model • Mechanical plate beveling device • Print speed preset • Automatic central lubrication • Reserve rollers per different diameter: 1 reserve ink roller • Reserve dampening rollers per different diameter: 1 reserve dampening roller per printing unit Machine in production in Austria Available in Spetember/October

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

13

Sierakowska Huta

6,304 km

Chipper / Shredder

WEIMA WL 5

€12,932

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), CATALOG NO. 7199 TECHNICAL DATA - loading hopper inlet 990x800mm - outlet for chipped wood, diameter 150 mm - rotor working width 800mm - main engine 15kW - pump motor 0.75kW - number of knives 18 pcs - knife dimensions 30x30mm - 15x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2230x1430x1640mm - weight 1250 kg ADVANTAGES – German production – O&M documentation – pressure drawer – autoreverse – used chipper, very good condition Bicypk8ntcw Net price: PLN 56900 Net price: EUR 12932 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Bad Feilnbach

6,631 km

Cantilever rack

3 St. Ständer für Spanplatten / 5 Ebenen Höhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

€2,490

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 210 cm, axle spacing: 1,000 mm, total height: 320 cm, load capacity per stand: 2,500 kg, Condition: new, Year of construction: 2023, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 shelf uprights height 3.2 m with base section 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard with a depth of approx. 2.1 m) Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) Net price: € 2,490.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Bigu3x3fmku - Shelf height 3,200 mm - Load capacity per upright 2,500 kg - Foot section and cantilever arms with 1,800 mm usable depth - (For 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 screw-on cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal bracing for 1,000 mm spacing - Shelf length = 2,100 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can be made in approx. 1 week after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

4

Skopje

5,845 km

Stainless steel storage tanks with mixer

5 tanks Stainless steel tanks with mixer 21 m3

Price info Price info Already requested Call

Condition: new, Vertical stainless steel storage tank, diameter 2,5 m height 6m with 4 legs Cfmak9mhl0

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Hergensweiler

6,797 km

welding turn table high adjustable

Hywema, Sideros, Euen 5 Tonnen EU-DTV 5000

Price info Price info Already requested Call

Condition: like new (used), Year of construction: 2014, 5 tons load capacity, turning, lifting / lowering, longitudinal axis automatic for components of any length, extremely robust 3 axis turning device incl. clamping device, height adjustable, longitudinal axis adjustable, speed infinitely variable - turning device 1: 1600 x 1700 x 2380mm - turning device 2: 2100 x 1700 x 2380mm - Control cabinet - control panel Ckjcp27eyz turning speed: 100-2000 mm/min table load: 5000 t Connection voltage: 230 V / Hz load capacity: 5000 kg stroke in height: 800 mm face plate diameter: 1600 mm Clamping diameter: 1400 mm center height: 1400 mm New price of this machine is close to 100.000.-€

Price info Price info Already requested more

Listing

Langenfeld (Rheinland)

7,003 km

Colour production machine

Ricoh Pro C7100SX inkl. 5. Farbe weiss, Fiery, Finisher, Paperdeck

€7,490

EXW Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, In this offer you purchase a used 5-colour production system "Ricoh Pro C7100SX" Object of sale: 1 x Ricoh Pro C7100SX with the following equipment: incl. 5th colour in white incl. Fiery E-43A (PRO80-32) incl. Finisher SR5050 incl. Vacuum Feed LCIT RT5100 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 2,568,633 pages Colour: Approx. 1,165,619 pages Black: Approx. 1,403,014 pages Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Bh9e2als9jc A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

10

Eggolsheim

6,710 km

Machining center

FANUC Häberle 5-Achsfräszentrum Robodrill plus Big K mit Roboterhandling

€2,99,000

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: as good as new (ex-display), Year of construction: 2019, Operating hours: 5,000 h, It is a Fanuc Häberle RobodrillPlus-Big-K - Häberle Feinmechanik CNC-Technik GmbH ADV machine with 200 mm column elevation more travel of the Z-axis 5-axis rotary table Häberle DTTiB 240 tools BT30 135 Workpieces Ø 250 mm up to 25 kg FANUC M20 robot for tool and workpiece handling Spindle: 24,000 rpm Zero point clamping system Renishaw measuring probe Knoll coolant system for IKZ 60bar Travel X700 x Y400 x Z400 mm rapid traverse 54m/min New price 450.000€ Bhott77ar8t Häberle RobodrillPlus-Big-K - Häberle Feinmechanik CNC-Technik GmbH

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

13

Sierakowska Huta

6,304 km

Planer

Hombak AFK 5

€1,533

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Catalog number 6275 TECHNICAL DATA - shaft width 510mm - length of the tops 2540mm - cast iron tops - both adjustable tops - original cast iron adjustable guide - shaft cover - 2.85kW engine - diameter of the 130mm extraction stub - dimensions length / width / height 2540x900x1000mm - weight 807 kg ADVANTAGES - German production - shaft cover - planer used, very good condition Pm9b7 Net price: PLN 6900 Net price: EUR 1533 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

7

Kreis Bergstraße, Deutschland

6,882 km

5 x Milling machine

5 x MAHO MH 400-700-800-1600

€34,567

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, MAHO - Package from stock clearance - Special price for the purpose of sale 5 x milling machine -MAHO MH 400 C - CNC 432 -MAHO MH 700 C - CNC 432 -MAHO MH 700 S - CNC 532 - NC-RT - 2 PW - 60 WW -MAHO MH 800 T - CNC 332 -MAHO MH 1600 S - CNC 432 EXW - Ex location Bensheim / Lorsch Free truck Dmer2t

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

7 Fraser Rd, Erith DA8 1PP, UK

7,474 km

machining center

Used XYZ UMC 5X 5 Axis VMC XYZ UMC 5X5 Axis

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2018, machine/vehicle number: 172822052, Specification Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation Maximum table load 360 degree 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor Maximum spindle torque Spindle motor 22.4kW 239Nm at 1100rpm 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis Rapid feed rate A axis 540 degrees a second (90 rpm) 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg Machine equipped with:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf conveyor Laser tool setting 7cbarcec Traori-this function keeps the tool in an optimized cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed guarding

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Sankt Margarethen im Lungau

6,499 km

Turntable

cnc rundtisch Nikken 4/5 achs AX5-230

€2,800

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Isszwki

Send inquiry Send inquiry Already requested more

Listing

Langenfeld (Rheinland)

7,003 km

Colour production machine

Xerox 1000 Colour Press 5-Farben inkl. Fiery + Paperdeck + Stacker

€8,890

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), In this offer you acquire a used colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. Fiery EX1000 (QX100-07) incl. Paperdeck JCF-1 Zswivbtc incl. Stacker LCS-1 incl. A-GW01 incl. 5th colour Meter readings: Total: Approx. 11,193,774 pages Colour: Approx. 8,933,137 pages Black: Approx. 2,260,637 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Send inquiry Send inquiry Already requested more

Listing

Dreieich

6,879 km

Machining Center - Universal

HERMLE (5-Achsen) C 800 U / TNC 430

Price info Price info Already requested Call

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 600 mm z-travel 500 mm CNC-control TNC 430 HEIDENHAIN Table dimensions 540 x 540 x Ø 630 mm max. table load 300 kg spindle taper SK 40 spindle turning speed range 15.000 U/min drive capacity - spindle motor 10,5 kW feed range 30.000 mm/min rapid traverse 30 m/min tool change unit 30 Pos. coolant voltage 400 V Xvuslxlh total power requirement 31,0 kVA weight of the machine ca. 8,0 t dimensions of the machine ca. 2,85 x 3,45 x 2,70 m - Serial-No.: 11875 - Machine ON: - Programm ON: - control: TNC 430 HEIDENHAIN - electrical hand wheel - coolant equipment

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Sierakowska Huta

6,304 km

Multi-saw shaft

FOD BYDGOSZCZ* DPPA II 5

€9,978

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Catalog number 6728 TECHNICAL DATA - max cutting height 120mm - max width of the element 700mm - working width of the shaft with saws 640mm - max saw diameter 400mm - disc bore diameter 90mm in advance: - pawls - 2 pulling shafts, toothed from down: - 2 smooth pulling shafts - shaft with saws - pulling shaft, smooth - rollers leading out, sliding, metal 12 pcs - 3 types of feed speed Cesx82q8hl - 4,4kW feed motor - 30kW engine - machine dimensions, length / width / height 3200x1420x1350mm - weight about 3000 kg * The MAR-MASZ company vouches for the quality of your purchase, but is not an authorized representative of the manufacturer. We use all trademarks and names for informational purposes only, enabling the identification of the goods. We only resell the goods that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer. ADVANTAGES - Polish production - solid construction - used machine, very good condition Net price: PLN 44900 Net price: EUR 9978 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

7

Pullach im Isartal

6,667 km

Biomass power plant 5 MW

Biomass power plant 5 MW

Price info Price info Already requested Call

Condition: good (used), CHP Plant Combined heat and power plant consisting of 3 steam boilers Commissioning in 2008/2009 Expansion with 3rd Boiler in 2010 All three boilers are identical Bfsbv2vj28e Each Boiler 13 to Steam/h~ 12.5 MWh BWL fuel heat output 26 bar operating pressure / 32 bar safety valve 480°C Turbine MAN Exhaust pressure 0,8-1,4 bara Heat extraction flow at heating condenser 90-105°C 4,93 MW (electric) at 90°C flow rate Generator: 6,3kV

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Tönisvorst

7,036 km

Trapezoidal taps (24401)

Steigung 1/5 Zoll 40 mm Durchmesser

€100

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Trapezoidal taps Bcsfb7pb30 Diameter 40 mm Pitch 1/5 inch

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

4

Schöftland

6,926 km

IVECO 60kVA STAGE-V generator set

Iveco EURO 5 Auf Fahrgestell ,On chassis, Sur châssis

€42,900

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Year of construction: 2023, Power generator 60KVA Iveco Stage-V Model: FPT F34TEVP01 Stage-V Engine manufacturer: Iveco Stand-by power: 62.5KVA Prime Power: 60kVA Voltage: 230/400 Frequency 50 Hz synchronous generator voltage regulation via AVR Cylinder: 4 Amps: 215.3 Induction systems: Turbocharged Water cooled Speed: 1500 rpm Fuel type: diesel Starting system 12 V Diesel tank: 140l Soundproof housing Sound pressure: 70db 3m. Alternator: Stamford S1L2-Y Protection class: IP23 Cooling water preheating Fuel consumption: 75% power 9.75 L/h Dimensions: LxWxH: 2850x1000x1420mm Weight: 1520kg. Aggregate control: ComAp AMF 25 with the operating modes MAN/Auto, Zf9kjl9o Display to show: Voltage, current, frequency, speed, battery voltage and operating hours including battery charger 12 V 2.5 A Sockets + terminal strip 6x sockets 230V incl. FI/LS B16A/30mA 2 x CEE 400 V 63A, 5-pin 2 x CEE 400 V 32A, 5-pin 1 x CEE 400 V 16A 5-pin ATS Transfer Panel Output Protection Circuit Breaker Incl. 4p MCCB Connection for grounding Incl. grounding with grounding rod with 10m connecting cable Chassis EURO: Chassis with overrun brake: Incl. assembly of generator Model: EGR 2000FT Vehicle technology: AL-KO Germany Technical data: Max. loading: 2000 kg Payload: 1615 kg *Overall measurements Length: 4676mm Width: 1820mm Height: 1140mm Curb weight: 385 kg Axles: 2 Wheel type: 185/R14 C 5x104N Max.load ball: 100kg Useful length: 2900mm *AL-KO fixed coupling: Press on coupling device: max.100kg *Braking system Eye coupling AL-KO Tire pressure: 4.5 bar Max. speed: 80 km/h *Suspension type Independent with elastic rubber elements. Mechanical inertia with autoreverse AL-KO Lighting and signaling system in accordance with EC/UN regulations Production time currently: 60 days after ordering

Send inquiry Send inquiry Already requested more

Listing

Langenfeld (Rheinland)

7,003 km

Colour production machine

Xerox 1000 Colour Press inkl. 5. Farbe, Fiery, Finisher, Paperdeck

€6,890

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), In this offer you acquire a used colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: Cp0vnvfpvr incl. Fiery EX1000 (QX100-07) incl. Finisher A-GW01 + LCS-1 incl. Paperdeck JCF-1 incl. 5 colour transparent Meter readings: Total: Approx. 3,661,919 pages Colour: Approx. 2,892,248 pages Black: Approx. 769,671 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Send inquiry Send inquiry Already requested more

Buy-it-Now

15

Two Coordinate Measuring Machine Measuring Microscope

Carl Zeiss 5/119 ZKM01-250D

€1,350

Fixed price plus VAT

Condition: good (used), - Offer number: 5/119 - Two-coordinate measuring instrument measuring microscope measuring technique - Manufacturer: Carl Zeiss Jena - Type: ZKM01-250D - with separate power supply ( see photos on the pallet ) - with altogether 5 digital displays measuring value displays 4 pcs Heidenhain VRZ 181 - with 1 pcs Renishaw P14 Probe Interface measuring device - with 1 monitor 1 computer 1 keyboard and 1 printer ( old ) - with all connection cables - Dimensions : with feet H x W x D 1830x940x860 mm - weight : total with accessories 520 Kg - optical condition according to photos - Attention during the disassembly of the measuring device a transport damage occurred, 2 cables were damaged (see photo with finger) - The device comes from a company insolvency and was in use until the end .Due to the transport damage we could not test the device . - Used Notes: The goods offered here usually comes from company liquidations and insolvencies. Due to missing nameplates it is not always possible to give exact item data. The item pictures are original photos that show the actual item condition. If several identical items are offered, only one of the items is photographed. There may be slight variations in the item condition of the individual item. Should an item be opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Ux9yr889

more

Listing

Request more images Request more images Already requested

4

Lenzing

6,511 km

Vibrating Screen

IFE 2x 5-1

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2006, Vibrating screening machine IFE 2000 x 5000 - 1 Dln007 Sieve width 2 m Sieve length 5 0 Single deck Steel sieves Machine has very few operating hours. Cross beams and side walls without any wear.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Szymiszów

6,210 km

Heizanlage URBAS 5 MW

URBAS 5 MW UR-FRR-5000

€67,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 1999, We offer you a heating system company URBAS heating system with a heating capacity 5 MW TYPE UR-FRR-5000 Heating for biomass, bark, wood chips, sawdust, humidity up to 60%. Gw7zgo3 year 1999 Complete furnace with electrostatic precipitator Fuel supply system Furnace with movable floor, dimensions 7 x 4 m Chimney Complete control system Pumps, valves Disassembled, ready for loading

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

2

Tönisvorst

(dealership location)

7,037 km

Three-jaw Chuck

223/5 Durchmesser 190 mm

Price info Price info Already requested Call

Condition: used, Three jaw Chuck (223/5) 7wgmgmz03 Diameter 190 mm Height 130 mm

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Neukamperfehn

6,968 km

U collision protection corner ram protection corner

Höhe: 400 mm / Materialstärke: ca. 5 mm/ Profilabm. außen: U: ca. 50 x 50 mm

Price info Price info Already requested Call

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm Hbh2cs97nv base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Price info Price info Already requested more

Listing

Langenfeld (Rheinland)

7,003 km

Colour production machine

Xerox 1000 Colour Press inkl. 5 Farben Gold, Broschürenfinisher,

€4,490

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. 5th colour (gold/silver) incl. Paperdeck JCF-1 incl. booklet finisher LFN-7 incl. stacker incl. FreeFlow print server, license expired Meter readings: Total: Approx. 18,613,184 pages Colour: Approx. 16,590,986 pages Black: Approx. 2,022,198 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Please note the FreeFlow licence agreements Packing and shipping: Q38ox You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded for you on video. For more information, you can of course also contact us personally.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

Hergensweiler

6,797 km

welding Table high adjustable 3 Achs

Euen 5 Tonnen EU-DTV 5000 Kg

Price info Price info Already requested Call

Condition: like new (used), Year of construction: 2014, 5 tons load capacity, turning, lifting / lowering, longitudinal axis automatic for components of any length, extremely robust Synchronized height adjustment with hydraulic clamping system one turntable with forward and backward feed 3 axis turning device incl. clamping device, height adjustable, longitudinal axis adjustable, speed infinitely variable - turning device 1: 1600 x 1700 x 2380mm - turning device 2: 2100 x 1700 x 2380mm - Control cabinet - control panel turning speed: 100-2000 mm/min table load: 5000 t Connection voltage: 230 V / Hz load capacity: 5000 kg stroke in height: 800 mm Iwzymh0yo face plate diameter: 1600 mm Clamping diameter: 1400 mm center height: 1400 mm with technical documentation, electrical diagram etc.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Hessisch Oldendorf

6,847 km

Site compressor

Atlas Copco 5 Sück vorhanden XAS 188 - 14 JD

Price info Price info Already requested Call

Condition: new, Year of construction: 2022, Equipment: PACE control, ECO mode, HardHat hood made of PE, Xc2003 control system Minimum temperature: -10 °C Dimensions base frame: 4844 x 1807 x 1892 mm (L x W x H) Unload speed: 1500 rpm Rated speed at full load: 1960 rpm Ambient temperature: 45 °C Motor power: 104 kW Flow rate (FAD): 10.9-9.7 m³/min Operating pressure range: 5-14 bar Compressor control flexible pressure and flow control: PACE Engine make / model: John Deere / 4045HI551 Compressed air treatment consisting of: Compressed air aftercooler, water separator and PD filter. Qzfqx Emission level: Stage V Number of cylinders: 4

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Weiterstadt

6,885 km

Die-cutting machine

Edel HM 35/350 BKE 200/5 HM 35/350 BKE 200/5

Price info Price info Already requested Call

Condition: used, Year of construction: 2000, Punching machine Noble HM 35/350 BKE 200/5 Maximum pressure 35 T Daoc8qt 5 mm sheet thickness at 40 kp/mm²

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Tönisvorst

(dealership location)

7,037 km

circle cutter

MK 5 50 - 200 mm

Price info Price info Already requested Call

Condition: used, Circle cutter MK 5 from 50 - 200 mm in diameter 2zqyff

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Kłodawa

6,452 km

Steton 5-head four-sided planer.

Steton 5-head four-sided planer. FAM /5

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: Bczb3yig - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Frankenblick

6,707 km

Horizontal & Vertical Balancing Machine

KKT 5 SM - KKTechnik Universalmaschine Auswuchtmaschine und Lohnwuchten

Price info Price info Already requested Call

Condition: as good as new (ex-display), Year of construction: 2022, Universal balancing machine with several application principles: _____ (1) Horizontal with roller bearings and V-drive e.g. for motor anchors, (2) Vertical operation with precision spindle system e.g. for fan wheels, (3) Complete balancing system e.g. for motors or motor spindles. _____ More refurbished balancing machines will be shown one after the other. _____ Remarks: Bo3b77lmly (a) Used balancing machine - sample machine - like new (b) Modernization of older balancing machines & measuring electronics (c) Contract balancing - advice and service for balancing machines (d) Design and manufacture of a calibration and test rotor (e) Integration in automated balancing systems possible (f) Technical balancing advice and concept development (g) Balancing center and contract balancing

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Untersiemau

6,718 km

HUBER CHEMO filter EM1204K/5 6xpcs.

HUBER CHEMO-Filter EM1204K/5 HUBERCHEMO-Filter EM1204K/5

€399

ONO VAT not applicable

Sales inquiries Send inquiry Already requested Call

Condition: new, For sale 6x spare filters for tool and mold making HUBER CHEMO-FILTER EM1204K/5 Djqxw2 incl. shipping costs (original packed)

Send inquiry Send inquiry Already requested more

Buy-it-Now

11

Dosimat dosing unit + magnetic stirrer

Metrohm 5/122 685 Dosimat + Stirrer 728 + Exchange Uni

€750

Fixed price plus VAT

Condition: good (used), For sale is the following item: - Our offer number: 5/122 - 685 Dosimat + Stirrer 728 + Exchange Unit 20 ml - Manufacturer: Metrohm - Serial number: 63026220 + 16850010 - Dimensions : WxHxD 260 x 43 x 270 - weight : 6 Kg - optical condition according to photos - used - functional In another listing of ours you can also find from Methrom 736 GP Titrino + Stirrer 728 +Exchange Unit 20 ml as a set Notes: Chnmivj3tf The goods offered here usually come from company liquidations and insolvencies. Due to missing nameplates it is not always possible to give exact item data. The item pictures are original photos that show the actual item condition. If several identical items are offered, only one of the items is photographed. There may be slight variations in the item condition of the individual item. Should an item be opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively for the identification and description of the existing goods.

more

Listing

Request more images Request more images Already requested

10

Neukamperfehn

6,968 km

collision protection corner

Höhe: 400 mm/ Materialstärke: ca. 5 mm/ Innenbreite: 138 mm

€15

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), The scope of delivery includes: Cgvk7r8n7v 01x U-approach corner, used material color: red total height: approx. 400 mm total width: approx. 148 mm inside width: approx. 138 mm total depth: approx. 350 mm Inside depth: approx. 225 mm Material thickness: approx. 5.00 mm Drill hole diameter: approx. 13/ 15 mm Number/ drill holes: 05 pcs.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

9

Neukamperfehn

6,968 km

U collision protection corner collision protection shelf

Höhe: 355 mm/ Materialstärke: ca. 5 mm / Innenbreite: 150 mm

€20

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery 01x U-approach corner, used material color: yellow total height: approx. 355 mm total width: approx. 305 mm inside width: approx. 150 mm total depth: approx. 230 mm material thickness: approx. 5 mm Number/ drill holes: 04 pcs. Hole Ø: approx. 17 mm General information about the article: This item is offered for pickup only. A beyond that desired transport or shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection Ca9qp0tgwi our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

11

Neukamperfehn

6,968 km

Stacking crates storage crates metal crate

SSI Schäfer Traka 14-6 / 5 Stück / Abm.: 600 x 400 x 120 mm (LxBxH)

€36

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Jxqrjm Mr.: Simon Blank Included in delivery are: 05x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

2

Neukamperfehn

6,968 km

workbench

Metal Sistem Super 4/5/6 Abm.: 1.200 x 900 x 900 mm (B x T x H)

€471

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new 01x angle set, new for mounting the worktop Gz7t0gp2s 04x safety hook, new Material color: compl. galvanized

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

2

Neukamperfehn

6,968 km

workbench

Metal Sistem Super 4/5/6 Abm.: 1.200 x 900 x 900 mm (B x T x H)

€529

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new Crxb0ilg for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

2

Neukamperfehn

6,968 km

workbench

Metal Sistem Super 4/5/6 Abm.: 1.200 x 900 x 900 mm (B x T x H)

€408

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 01x Angle set, new Gz7k3dhcu for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

2

Neukamperfehn

6,968 km

workbench

Metal Sistem Super 4/5/6 Abm.: 1.200 x 900 x 900 mm (B x T x H)

€349

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF B7mdbpctjd thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Material color: compl. galvanized

Send inquiry Send inquiry Already requested more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

Crane

MPG 315 TM 5+5

€2,90,000

Condition: good (used), Year of construction: 2019, Functionality: fully functional, TECHNICAL DETAILS Lifting torque: 315 t*m Working pressure: 295 bar Rotation angle: Endless / Continuous Boom reach: 9605 mm Further details: see PDF Smbtc8fk MACHINE DETAILS Mobile dimensions: 2,415.15 x 11,481 x 3,180 mm footprint: 9,032.98 x 8,925 mm

more

Listing

Request more images Request more images Already requested

4

Poland

6,172 km

Other

HASKOVO 4PM-230/5

Price info Price info Already requested Call

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 3810 mm Measurements depth 1590 mm Measurements height 1525 mm Machine weight 1910 kg Main Drive Number of spindles 5 Spindle speed range 6000 Media Main electronic connection 400 V / 50 Hz Power consumption 24 kW General Data Measurements width 3810 mm Measurements depth 1590 mm Measurements height 1525 mm Machine weight 1910 kg Main Drive Number of spindles 5 Spindle speed range 6000 Media Main electronic connection 400 V / 50 Hz Power consumption 24 kW This HASKOVO 4PM-230/5 was manufactured in the year 2011 in Bulgaria. The machine has a spindle speed of 6000 rpm. Vwwxd9z Application Types Other

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Niederhelfenschwil

(dealership location)

6,841 km

Machining Center - Univ. (APC)

EXERON HSC MP7/5

Price info Price info Already requested Call

Condition: used, Year of construction: 2016, CONTROLS .. CNC controls HEIDENHAIN TNC 640 Bgduzi832mo WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 640 mm .. Y-axis travel: 250 mm .. Z-axis travel: 400 mm .. rotating range B-axis from: 105 ° .. rotating range B-axis up to: -105 ° .. rotating range C-axis from: 0 ° .. rotating range C-axis up to: 360 ° .. distance spindle nose - table surface (max.): 450 mm TABLE .. workpiece load (max): 60 kg SPINDLE / HEAD .. spindle revolutions (max): 42000 /min TOOL MAGAZINE .. number of positions: 90 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2400 mm .. space requirements -front/back-: 2370 mm .. total height: 3000 mm ATTACHMENTS .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Machine equipment: - Accuracy package - Workpiece magazine for 36 ITS pallets 50/148 - Renishaw OMP 400 (measuring probe) table chuck PowerChuck P Ø150 Tool measurement BLUM Infrared probe Renishaw OMP400 Medium distributor MHT with 3 dosing settings Thermal package / Accuracy package Kinematic-Opt incl. calibration pallet ball 30mm Dynamic Collision Controller (DCM) Z-axis compensation Fault indicator exo-call Remote diagnostics exo-net 1 network connection Hand control bar HSCI FS Additional light for working area Pressure amplification for chuck

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Staufenberg

6,878 km

Gear Noise under Load Testing Machine

CM-DIGIT A-175/5

Price info Price info Already requested Call

Condition: used, Year of construction: 2001, total power requirement:7 kW weight of the machine ca.:1,2 t Cguokngq long shafts gear test center WZ 200/1900 O3D Class Zeiss Hofler (Klingelnberg)

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Hessisch Lichtenau

6,811 km

High-speed milling spindle

HENNINGER 814 / 5131 / 1:5 / 15000

€850

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Year of construction: 1988, High speed milling spindle HENNINGER Type 814 / 5131 / 1:5 / 15000 speed max. 15000 rpm at 70% ED transmission ratio 1:5 power transmission up to approx. 2,5 kW Bm3jeme7x9 Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with tightening thread M16 collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12,5 / 13 / 14 mm own weight 6,5 kg good condition

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Lambsborn

6,970 km

Veneer press

Simi SPM-FLL80/5

€4,800

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Veneer press type SPM-FLL80/5 Panel size 2500 x 1300 mm F8irdiho9 Table stroke via keyboard Press pressure 80 tons Safety rip cord

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Nevers

(dealership location)

7,297 km

Panel press

ORMA NPC DIGIT 3000/5

€16,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: ready for operation (used), Technical characteristics C7xsm9nc3 pressure 2.2 kg / cm² 18 kW diathermic oil boiler timed pressing digital display Largeur plateau1300 mm Longueur plateau3000 mm Diamètres vérins70 mm Nombre de vérins6 Caractéristiques presseHeating plates Température maxi120 °C Power and Motors Voltage: 400 V Power: 20 Kw Overall dimensions Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

Send inquiry Send inquiry Already requested more

Listing

Volkach

6,769 km

ring eyelet stitching heads

Hohner 48/5

Price info Price info Already requested Call

Condition: used, offer consists of: Ipxcld9v0 2x Hohner 48/5 ring eyelet stitching heads suitable for any kind of booklet maker / saddle stitcher - weight: 5,4kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Dobroshane

5,818 km

multi-spindle drilling machine

COMEC FMO/5/1000

€2,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Comec FMO 5 1000 Horizontal multiple drilling machine in good condition Lcabptuwn9

Send inquiry Send inquiry Already requested more

Save search query