Used Paint Mobile Extraction for sale (13,267)

Condition: excellent (used), Year of construction: 2018, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, Kemper self-cleaning, pneumatic, vacuum filter. Suitable for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile Kemper MaxiFil Clean cartridge filter is designed for continuous operation to filter welding fumes and high-concentration dusts. Suitable for use with all welding methods for carbon steel, low-alloy and high-alloy steels, as well as aluminum. Gisdpfotq E Siex Ah Hel Cost-effective in operation due to the long service life of the filter cartridge. With IFA-W3 certification, the standard version of the filter may be used for welding high-alloy steels. Specifications: Airflow capacity – 1,100 m³/h Maximum negative pressure – 3,200 Pa Three-phase fan motor – 1.5 kW Filtration area – 15 m² Year of manufacture – 2018 PTFE-membrane cartridge filter Filtration efficiency – >99.97% Integrated start/stop delay timer. When connected to an optional start/stop sensor, the extraction delay time after completing the welding process can be set between 5-60 seconds. Stock no. – 1091

Condition: excellent (used), Unit with supply air heating in excellent condition Giodpfx Ahoxpg Dxe Hol

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Gjdpfx Asvvizkeh Heil

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Godpfx Asxvpumjh Hjil Please check out our other listings as well.

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction -Drive: 0.75 kW -Volume flow rate: ³/h -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Number: 3x welding fume extraction systems available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc. Gisdpfxsx I Akno Ah Hjl

Condition: new, Design with bag filter Technical data: extruction nozzle 200 mm engine power S1 3 kW, 400V nominal flow rate 2262 m³/h max. volume flow 3010 m³/h cut surface vacuum measured with 2 m hose 2174 Pa Gedpfxsvrv E Ij Ah Hsil filter area 13,7 m² filter dedusting compressed air residual dust content H3 (

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, input voltage: 380 V, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Gijdpfx Aex Hi Rxsh Hol Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Mobile paint mist extraction unit Gedstk H Nyjpfx Ah Hjil With side air baffles Built-in fan

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 12641245, type of input current: three-phase, overall weight: 82 kg, input voltage: 230 V, volume flow: 600 m³/h, noise level: 73 dB, space requirement width: 770 mm, space requirement length: 1,145 mm, input frequency: 50 Hz, Equipment: type plate available, The FilterCart Carbon mobile filter unit is specially designed for odor removal. The FilterCart Carbon includes the standard extraction arm and can optionally be equipped with a HEPA filter. Applications: Solvents, smoke, and other gas contaminants. Condition: Slight signs of wear (minor damage to the PVC hose – see image), as the mobile filter unit was only used a few times as a demonstration unit. Product Description • Durable disposable filter with a large filter surface • Ready for immediate use • Filter housing with clamping lever lock Gjdpfx Aowfrggeh Hsil • Robust chassis with 2 swivel casters and 2 fixed wheels • Easy to maneuver Protection class: IP42 Material: Rotationally molded plastic housing. Extraction arm made of PVC hose and aluminum rods. Fan made of steel and aluminum. Extraction arm diameter: 160 mm Arm length: 2 m Filter material: Activated carbon

Condition: new, Year of construction: 2025, Chip extractor ASA 2803 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 120 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Idle speed 2950 min¯¹ Input power 2,2 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1,92 m² Noise emission Sound pressure level max. 87.5 dB(A) Gijdpfxehk S Sdj Ah Hel Volume flow Nominal volume flow 2800 m³/h Negative pressure max. 1900 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Giedpsvvcqxofx Ah Hjl Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: as good as new (ex-display), Demonstration machine Giodpfevrvr Isx Ah Hsl Technical data: Engine output 3 HP at 100% duty cycle, voltage 400V, suction capacity 3900 m³/h, suction connection 150 mm, distributor 3 x 100 mm, dimensions L x W x H = 150 x 75x 220 cm, weight approx. 60 kg Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3257 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Gijdpfsx Hi H Hjx Ah Hsl Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1990, Motor power: 1 kW Gjdowv Nbcepfx Ah Heil Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Extraction capacity: 4200 m³/h Gedexbf Rbjpfx Ah Heil Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: new, Year of construction: 2025, Chip extractor ASA 1903 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 110 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data Idle speed 2950 min¯¹ Input power 1,5 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 1,92 m² Noise emission Giedpshk S Shefx Ah Hel Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Negative pressure max. 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg Godpfx Ahexn Tile Heil To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, Chip extractor ASA 4303 mobile, with 180° rotatable suction unit Giedpfshk S Slox Ah Hol For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 215 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Input power 3,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2,4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Negative pressure max. 2000 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, No. 04491 Gisdpfx Aexnqauoh Hsl Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Giodpehk S Szefx Ah Hel Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Gisdpfx Asxnprcjh Hel Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h Gedpfxohk S S Ej Ah Heil For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Godpfx Ahebumr Sj Hoil Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit Giedpfx Ajhk S Stjh Hel For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Gijdpfehk S Swex Ah Hjl Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose