Used Paint Mist Extraction for sale (7,529)

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Lrsdpfxsvvizks Aqvol Storage location: Garbsen

Condition: good (used), Year of construction: 1994, functionality: fully functional, volume flow: 8,900 m³/h, filter area: 5 m², type of input current: DC, suction capacity: 8,900 m³/h, rotational speed (max.): 1,500 rpm, space requirement height: 1,100 mm, space requirement length: 2,200 mm, space requirement width: 1,100 mm, Schuko supply air unit with 110 kw heating coil and various angular and round pipe components Cross-flow heat exchanger Deflector hood Supply air ceilings Shut-off dampers - all Schuko brand Without switch box Lredpet Rv Txefx Aqvol

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Lodpewv Nbcsfx Aqvsrl Weight: approx. 120 kg

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: Lsdpfxjwv T R Uo Aqvsrl - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Lodpfxsbumr Ss Aqvorl Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Lrjdpfx Aqjwydgzjvjl

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, volume flow: 6,000 m³/h, filter area: 4 m², total length: 2,000 mm, total height: 2,000 mm, overall weight: 300 kg, power: 2 kW (2.72 HP), pipe diameter (max.): 400 mm, Paint mist extraction wall, spray wall, exhibition device, paint area approx. 2,000 x 2,000 mm, incl. side baffles, motor in ATEX version Ledpowrnypofx Aqvorl - immediately available -

Condition: excellent (used), functionality: fully functional, Olimpia SE3BSTD spray booth wall Length: 3000 mm 2x cardboard filter Lrodpfxsy Rmyxj Aqvjl Pint stop filters Filtration capacity: approx. 11,000 m3/h Motor power: 2.2 kW CE mark Dimensions: 335x150x238 cm (H)

Condition: excellent (used), Year of construction: 1997, Hurrican Dambauer complete paint spray booth system Ljdpsy Sv Alofx Aqvorl

Condition: used, Year of construction: 2011, functionality: fully functional, Dry extraction wall Spänex TAW kompakt 215 Ledpfsxltrujx Aqvsrl Paint mist extraction wall with dry separator Complete supply air system Hot water heating coil Spray booth control with touchscreen 2 x 2.0 kW drive power 6000 m³/h air volume flow Year of manufacture: 2011 From joinery closure / retirement, in VERY GOOD CONDITION From joinery workshop Includes all piping, explosion-protected lighting and documentation

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel Lrodpoy Nikkofx Aqvol emergency stop button (STOP) filtration capacity 15,000 m3/h year of production 2022 CE marking

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime Ljdpeu T Hrpofx Aqvjrl - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: excellent (used), Servatechnik extraction Ljdpfxex Nbnno Aqverl

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Ledpfx Aqey Dpfwjvsrl Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: used, Year of construction: 2025, New demonstration machine! List price €4,367 net. Sturdy, galvanized steel sheet construction. Work surface equipped with a special folded cardboard filter, an additional post-filter, and a filter cassette for floor-level extraction. All filters are easily and quickly replaceable. The built-in radial fan, explosion-proof design, features an impeller made from steel sheet. The explosion-proof drive motor (EEx nA II) is mounted outside the airflow and drives the fan directly. The supply cable is 10 meters long and a plug-socket switch combination with integrated on/off switch is included. Attention! The switch is not explosion-proof and is only suitable for use outside of explosion-hazardous areas. The fan outlet is located at the top. The air outlet is directed vertically upward. This spray mist extraction wall complies with the latest regulations. Designed for installation in paint shops in zone 2, where the average calculated concentration of flammable solvents is limited to less than 25% of the lower explosion limit. Technical specifications: - Max. air volume: 3,500 m³/h - Exhaust connection: 300 mm - Work surface: 2,000 x 1,000 mm - Required space: 2,600 x 920 x 1,420 mm (H) - Motor: 1.50 kW, EEx nA II T3, IP 55, 1,500 rpm, B5, 400 V, 50 Hz - ATEX marking: Ex II 3 G - Sound pressure level: 75 dB(A) - Weight: 220 kg - Fan: left - Folded cardboard filter: 1,000 x 2,000 mm – 1 pc - Folded cardboard filter 1,000 mm wide (no. 2072091295) – each as a 10m pack, flame-retardant according to DIN 53438 F1/K1, cut length = 25 folds per 1,000mm - 2072090518 filter cut for Paint-Star – 1 pc - 2072091473 cassette filter for Paintstar – 1 pc Ljdpfx Aqey Ehlrsvorl Storage location: Rieth

Condition: used, With bottom extraction attachment Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) With drip tray Comes with control system Lrsdpfoyxm Eksx Aqvjl

Condition: excellent (used), AZZURRA CS4B Spray Booth Wall Length: 4000 mm 2x cardboard filters Pint Stop filters Filtration capacity ~ 15,000 m3/h Motor power: 4.0 kW CE marking Ledoyh E Hnepfx Aqvjrl

Condition: used, Year of construction: 1999, Paint booth extraction system Attention: The supply air unit does not have a heating coil, only a fresh and recirculated air damper. Ledpfjyvkwfsx Aqverl Self-dismantling Price: 3500.- Location: 1230 VIENNA

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Lsdpfsxz Achsx Aqvsrl Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Lrodpfxsyuf S He Aqvel Edge extraction with fan Air supply unit 3102 WW, output 75 kW Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Lodpfx Aqjuyh R Aoverl Depth (mm): 600/800

Condition: used, Year of construction: 2022, Volume flow rate: 18,000 m³/h, active filter area 237.6 m², condensate drain, designed for 10 machining centers, mounted on a custom-built steel frame above the hall entrance gate, complete with piping, manufactured to the dimensions of the hall, and intended as a supply line to the individual CNC machining centers. Subject to prior sale. Lrjdpfx Aqjy T Nxvevel

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Lredey Rflyopfx Aqvel Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: good (used), Motor : 1.5 kW Quantity : 2 pieces Lrodpshc Sypjfx Aqvel Price/ piece

Year of construction: 2014, condition: ready for operation (used), A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible. Ledpfx Aqewnr Ipjvsrl