Used C200 for sale (213)

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 307 mm, turning diameter: 250 mm, spindle bore: 51 mm, travel distance X-axis: 185 mm, travel distance Z-axis: 370 mm, Key figures at a glance: 250 mm maximum turning diameter, 420 mm swing over bed, 307 mm maximum turning length, 51 mm spindle bore, Bjdjzr Ir Aspfx Apajlp 4000 rpm maximum spindle speed, 5.5/7.5 kW main motor, an 8-station turret, 185 mm X-axis travel and 370 mm Z-axis travel. The year of manufacture is 2004 and the control system is a Fanuc Series 21i-TB. The machine plate states a supply of 220 V, three phase, 50/60 Hz, 42 A and a maximum power supply of 16.1 kVA, with control voltages of 100 V AC and 24 V DC. Buyers on a 400 V network should plan for a matching transformer. The approximate footprint is 1600 x 1280 x 1890 mm at a weight of around 2800 kg

Condition: used, Year of construction: 1990, Bosch CNC control CC200 spare parts Monitors, cards, controllers etc. Blsdpfevk D R Nex Apaop

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D spindle passage 65 mm turning speeds 5.000 U/min max. torque at 40% / 100% load 145 / 105 kW Blsdpfowzynqox Apajp turret-slide 1,2 und 3 x-travel 110 mm z-travel 360 mm y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, spindle motor power: 45 W, spindle speed (max.): 10,000 rpm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, type of input current: three-phase, feed length X-axis: 60,000 mm, feed length Y-axis: 60,000 mm, feed length Z-axis: 60,000 mm, workpiece weight (max.): 5,000 kg, total height: 4,400 mm, total length: 11,200 mm, total width: 12,300 mm, overall weight: 58,000 kg, spindle diameter: 100 mm, Equipment: documentation/manual, 5-axis vertical machining center with pallet changer, featuring an updated Heidenhain 530 CNC control, 180-position tool magazine, chip conveyor, high-pressure coolant tank with dual 30-bar and 80-bar pumps, through-spindle coolant, paper filter, Heidenhain electronic probe, quick-set capability, BLUMM laser presetter, and electronic handwheel. Blodpfxsz Izd Uj Apaep

Condition: repair required (used), MZ Project LC 5000 – longitudinal cutting saw Cutting length: 2000 mm Bodpfxo Af Uu Ro Apaolp Machine intended for spare parts.

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 28 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - KNOLL VRF 500 chips conveyor Bljdpfxjuhauyo Apaep - Parts catcher with conveyor in position 6

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 including a second pair of clamping jaws, width 200 mm Bodpfezfimujx Apaslp Jaw width 200 mm Base body, type LC 160/200 (for jaw widths of 160 and 200) Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition optional: Clamping jaws, width 160 mm, height 50 mm, new € 200.00 Aluminum jaws, width 200, height 60 mm, height 80 mm, new € 200.00 Worm gear € 100.00

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 300 mm, travel distance Z-axis: 900 mm, total height: 5,800 mm, total width: 5,500 mm, overall weight: 26,000 kg, controller manufacturer: FANUC, controller model: 0i-TC, product length (max.): 7,200 mm, number of axes: 2, Vertical turning machine manufactured in 2009. This SMTCL QTC 20090 features a maximum turning diameter of 2,000 mm and a turning height of 1,600 mm. It includes a manual 4-jaw chuck with a diameter of 1,600 mm and a 12-position tool changer magazine. If you are looking to get high-quality turning capabilities, consider the SMTCL QTC 20090 machine we have for sale. Contact us for further details regarding this machine. • CNC control: FANUC 0i-TC with 10.4" screen • Mobile vertical crossbar with 5 indexing positions • CE safety equipment • Manual 4-jaw chuck diameter: 1,600 mm • Maximum turning diameter: 2,000 mm • Maximum turning height: 1,600 mm • Chuck speed: 1–254 rpm (2 ranges) • Motor power: 55 kW (30-minute rating) • RAM cross-section: 220 × 220 mm • 12-position tool changer magazine • Electrical supply: 380 V ±10% Additional equipment • Direct measurement system: HEIDENHAIN • RENISHAW tool presetting system • Turning tool holder • Chip extractor • Work light • Access cover and stairs Bljdez Sy Tkspfx Apaop Technical Specification Driven Tools No

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 8 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 53 / 68 [kW] - Spindle speeds : 3000 [rpm] - Max. bar diameter : 102 [mm] - 1 - Saisie libre : 2000 [mm] - Max. chuck diameter : 420 [mm] - Rapid traverse rate : 30 [m/min] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle power : 50 / 70.5 [kW] - Spindle speeds : 3000 [rpm] - Max. bar diameter : 102 [mm] - Rapid traverse rate : 30 [m/min] - C axis indexing precision : 0,001 [°] UPPER LEFT TURRET - Number of positions : 12 - Number of motorized positions : 12 - Tool holder type : VDI 40 - X/Z stroke : 320 x 2.000 [mm] - Y stroke : 210 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 17 [kW] LOWER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - Tool holder type : VDI 40 - X/Z stroke : 210 x 2.000 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 11.3 [kW] POWER SUPPLY Bljdpfjuhbpfsx Apaep - Supply voltage : 400 [V] - Total installed power : 137 [kW] WEIGHT & DIMENSIONS - Machine floor space : 9.000 x 3.500 [mm] - Machine height : 3.000 [mm] - Machine weight : 21.000 [kg] MACHINE HOURS - Number of working hours : 34274 [h] EQUIPMENT - CNC : INDEX C200-4D (Siemens 840D) - Coolant tank : KNOLL * with high-pressure pump : 80 [bars] * with paper filtering unit - Automatic doors - Chips conveyor : Droite

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Bjdpozfaaxefx Apaolp

Condition: excellent (used), Year of construction: 2011, Horizon brochure production line Horizon VAC 100 a, VAC 100m collating machine Number of stations: 2 x 10 Maximum format: 500 x 350 mm Bedpoyhzubsfx Apaslp Minimum format: 148 x 120 mm Loading capacity: 55 mm per station Speed: max. 9,500 cycles/h Weight: 320 kg per tower Machine dimensions: 810 x 652 x 1,961 mm Power supply: 230 V, 10.6 A, 2.3 kW ST-40 stack discharge table with misfeed tray - Maximum format: 350 x 500 mm - Minimum format: 182 x 128 mm - Paper weight: 52 – 208 g/m² - Speed: max. 8,000 sets/h - Stack height: 360 mm - Machine dimensions: 1,353 x 652 x 1,027 mm (L x W x H) - Power connection: Schuko plug, 230 V SPF 200A saddle-stitching station Input format for 4-page sheets: min. 180 x 105 mm, max. 508 x 356 mm Finished brochure format: min. 85 x 105 mm, max. 250 x 356 mm Brochure thickness: max. 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with front cutter FC-200A) Machine dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power supply: 230 V, 5.3 A; 1.0 kW Trimmer FC 200A Available from 11/2026

Year of construction: 2017, condition: used, offer consists of: short delivery unit SC-200 Bodszwlzlopfx Apaolp - weight: 18kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Bsdoz Ip Tkjpfx Apaslp Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit - screw diameter: ⌀25 mm - 49 g/shot A rotary table can be purchased for an additional charge. Dimensions: Weight: 7300 kg All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request.

Condition: used, Year of construction: 2015, operating hours: 50,000 h, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 60,000 rpm, fuel: domestic gas H, type of cooling: air, nominal power (apparent): 999 kVA, input frequency: 50 Hz, input current: 1,444 A, Equipment: documentation/manual, Used natural gas-fired combined heat and power plant for electricity and industrial steam production. Main equipment: Bjdpfsz I T Ekex Apaslp • Capstone C1000: five C200 microturbine modules, each rated at 200 kW; electrical output of the complete package: 999 kWe; 400 V / 50 Hz; grid-parallel operation; common acoustic enclosure and control system. • APROVIS waste heat steam boiler: rated production of 2,000 kg/h of saturated steam at 6 bar(g); maximum allowable pressure 9 bar(g); equipped with two economizer stages for heat recovery. • Reinhard Simon CKO501G supplementary duct burner: 500 kW, for additional exhaust gas heating upstream of the boiler. • BIO-KOMP fuel gas booster compressor: 30 kW, maximum flow 340 Nm³/h, discharge pressure 6 bar(g). The plant has been regularly maintained under a maintenance contract, with components replaced in accordance with the maintenance schedule. One of the five turbine modules is currently non-operational. Operating hours: T1: 53,191 h; T2: 50,891 h; T3: 51,628 h; T4: 52,691 h; T5: 49,487 h. The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. Technical documentation is available. Inspection, price and collection terms are subject to agreement.

Condition: used, Year of construction: 2021, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 285 A, ambient temperature (min.): -10 °C, ambient temperature (max.): 120 °C, pressure: 25.5 bar, We offer these used Daikin EWAH330TZSRB1005 x 3, EWAD370T-SSC2001 air conditioning units, manufactured in 2021. Model: EWAH330TZSRB1005 Serial number: CH-21D00600-KKKKXX Refrigerant: R1234ze Refrigerant charge: 56 kg GWP: 7 tCO₂ equivalent: 0.4 Low-pressure: 15.5 bar High-pressure: 25.5 bar Temperature range: -10/120 °C High-pressure cut-out: 21 bar Water ingress protection: IPX4 Bledpfxsz Ef H Us Apaep Frequency: 3-50 Hz Voltage: 400 V Current: 285 A Contains fluorinated greenhouse gases: 3.546 kg Year of manufacture: 2021 Country of manufacture: Italy Three identical chillers. EWAD370T-SSC2001 R134a One chiller. The price is for all four units together and they are sold as a set. If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 6 - Number of turrets : 3 MAIN SPINDLE Bljdouhac Dspfx Apaep - Spindle power : 29 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 4.2 [kW] - Spindle speeds : 4500 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 280 [mm] UPPER LEFT TURRET - Number of positions : 5 - Tool type : VDI25 UPPER RIGHT TURRET - Number of positions : 8 - Number of motorized positions : 8 - X/Z stroke : 90/280 [mm] - Tool type : VDI25 - Live tools speed : 4500 [rpm] - Live tools power : 4.2 [kW] LOWER LEFT TURRET - Number of positions : 6 - X/Z stroke : 81/80 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] EQUIPMENT - CNC : INDEX C200-4 - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Collet chuck

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 32 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : fixed X axis, Z axis controlled by CNC - slide unity 2.1 : fixed X axis, Z axis controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : fixed X axis, Z axis controlled by CNC Bledpfx Aouhangspaop - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : fixed X axis, Z axis controlled by CNC - slide unity 5.1 : fixed X axis,Z axis controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - counter-spindle in position 6.1 EQUIPMENT - INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR 32/33/P bar loader - Coolant tank with HP pump - KNOLL chips conveyor - RIEDEL cooling unit - Parts catcher with conveyor in position 6.1 - Cross rilling device in position 3.1 et 4.1

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, SüMann smoking chamber, type Electronic 2000 (zu SRK 1000) with friction smoke generator, inside dimensions: 1320 mm x 1.000 mm x 1.500 mm, total dimensions of the smoking chamber: 1850 mm x 1150 mm x 2360 mm, including a smoke trolley for Y-shaped smoke sticks, with a smoke stick length of 850 mm. The trolley dimensions are 1050 mm x 850 mm x 1400 mm. It features 5 levels, each capable of holding 14 Y sticks, totaling 70 sticks. year of manufacture January 1986, serial number: 850313; renewed/refurbished in 2014 with additional advanced process controller Aditec MIC 2510-D844209 Bjdpfx Aex I Sniepaslp In-house control panel for universal heat exchangers of any manufacturer. Stable operation at power supply voltage 260 VAC. Front panel made of milled aluminium. Body made of stainless steel, 1 mm thick. Activated to work in the program Aditec VisuNET. This Aditec in-house control panel is for universal heat exchangers of any manufacturer. This unit is dismantled and placed on a pallet, ready for transport. The smoking chamber will be delivered sanitized. Price 4.000 Euro + VAT negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2000, x-travel 1120 mm Bljdpeztfu Dofx Apajp y-travel 510 mm z-travel 510 mm control Mazatrol 640 M

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Bodpfxszimqxj Apaelp

Condition: excellent (used), Year of construction: 1994, CNC Lathe Automatic Index GS42 Control: Index C200-8 (Sinumerik 880) Spindle bore: 42 mm, two machining turrets Turret 1 – X=120 mm, Z=220 mm, 12 tool stations (6 driven), part handover Turret 2 – X=120 mm, Z=80 mm, 8 tool stations (4 driven) Dynamic C axis Bar feeder with magazine INDEX MBL 3500 mm, including complete set of reduction sleeves Set of clamping collets – 10 pcs Driven tool holders – 5 pcs Standard VDI20 tool holders – 5 pcs Bodpfxox E Sqle Apajlp The machine is 100% operational and in excellent condition (maintains tolerances up to 0.001 mm)

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000. It features an X-axis stroke of 1120 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 510 mm. The machine has a spindle speed of 10,000 rpm and uses a SK40 tool shank. If you are looking to get high-quality machining capabilities, consider the Mazak VTC-200B vertical machining centre we have for sale. Contact us for further details. • Notes/condition: • Screen defective; NC module requires repair • New X-axis installed 3 years ago • All relays replaced 3 years ago Bljdpfx Apsz R A Tkjaop • 2025: New spindle motor installed (worth €6,900 excl. VAT) • 2022: New power supply (worth €3,900) Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Blodpfx Ajx Rywkopaep

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 1 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 20/27 [kW] - Spindle speeds : 6300 [rpm] - Max. bar diameter : 42 [mm] - Max. diameter on bench : 200 [mm] - Max. chuck diameter : 160 [mm] - C axis indexing precision : 0.001 [°] UPPER TURRET * Number of positions : 12 * Number of motorized positions : 12 - Tool type : VDI 25 Blodpfx Aouhacdopasp * Live tools speed : 6000 [rpm] * Live tools power : 8 [kW] LOWER TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 110/800 [mm] - Tool type : VDI 25 - Live tools speed : 6000 [rpm] - Live tools power : 5,5 [kW] TAILSTOCK - Tailstock type : Numérique POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 43 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4435x1950 [mm] - Machine height : 1930 [mm] - Machine weight : 7500 [kg] EQUIPMENT - CNC : INDEX C200-4D - Linear scales - Coolant tank * with high-pressure pump : 80 [bars] * with paper filtering unit - Chips conveyor - Oil mist extractor - Chuck 3 jaws

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 32 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : fixed X axis, Z axis controlled by CNC - slide unity 2.1 : fixed X axis, Z axis controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : fixed X axis, Z axis controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : fixed X axis, Z axis controlled by CNC - slide unity 5.1 : fixed X axis, Z axis controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - counter-spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar loader - Coolant tank with HP pump - KNOLL chips conveyor - Parts catcher with conveyor in position 6 Bledouhaxlspfx Apaep - Cross drilling device in position 3.1 et 4.1