Used Cable Pulling Winch for sale (6,324)

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper Bjdpfx Aksx It N Ustolp • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Condition: good (used), V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable belt width -Adjustment range: 17 - 35 mm Bjdpfx Aksymb Emstelp -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm -Weight: 5.1 kg

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 64-8M-50 -Material: Steel -Number of teeth: 64 teeth / Belt width: 50 mm -Mount: Optibelt 2517-40 taper clamping bushing Ø 40 x 44.5 mm Bsdjx Slcbspfx Aktjlp -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 168 x 60 mm -Weight: 6.8 kg/pc.

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibelt, timing belt pulley Ø 192 mm -Type: D TB 32-8M-20 Bodpfxoy Aklvj Aktelp -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 3x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

Condition: used, Entecon conveyor flowveyor cable conveyor aerodynamic transport Tube diameter: 76.1 mm Completely stainless steel Total length: 4300 mm In very good condition Bodpox Nymcefx Aktelp See our other listings VMA Wekerom

Condition: good (used), Flat belt pulley, belt pulley, drive pulley, roller pulley Bsdpfowuzk Hox Aktslp -Pulley: Flat belt pulleys 7 pieces -Width 70 mm -Hole: Ø 18 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions box: 430/210/H115 mm -Weight: 11 kg

Year of construction: 2008, condition: good (used), Indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Manufacturer: Verlinde, control for electric wire rope hoist type VT202116 -Control voltage: 48 V -Frequency converter: Variator VT -Individual components: see photos Bsdpfowmk Eksx Aktjlp -Delivery/Price: complete -Dimensions: 630/310/440 mm -Weight: 30 kg

Condition: used, Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 255 mm -Type: 56-14M-85 -56 teeth: belt width approx. 85 mm Bjdpspul Uxofx Aktslp -Receptacle: Taper clamping bushing: optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 255 x 100 mm -Weight: 24.5 kg

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Manufacturer: Optibelt, V-belt pulley, pulley 4 grooves SPB 236x4 3020 Bodpfx Akepid D Dotslp -V-belt width: 17 mm -Receptacle: Ø 42 mm SKF taper bushing 3020-42 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 240 x 80 mm -Weight: 13.9kg

Condition: good (used), V-belt pulley, belt pulley -Diameter: 630 mm -Belt: 1 -V-belt width: 25 mm -Hole: Ø 32 mm Bledpfx Asv Twn Hektop -Weight: 29.5 kg

Condition: good (used), V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 7-groove pulley type SPA -V-belt width: 13 mm -Mounting: Taper bushing Ø42 x 125 mm (can be changed) -Dimensions: Ø143 x 125 mm Bledpewyvr Asfx Aktsp -Weight: 9.5 kg

Condition: used, mileage: 2,35,000 km, power: 126 kW (171.31 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2008, emission class: euro4, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, had accident, immobilizer system, * Nissan Navara Pick Up Double King Cab XE 4x4 – Passenger Car Registration – * 2.5 l Diesel – Displacement: 2,488 cc – 126 kW / 176 hp – Euro 4 – Green Emissions Sticker – * ATTENTION: VEHICLE HAS A TRANSMISSION ISSUE – WHEN WARM, 4TH AND 5TH GEAR MAY OCCASIONALLY JUMP OUT – CAUSE UNKNOWN – VEHICLE IS DRIVABLE – SOLD AS IS, IN CURRENT CONDITION – * VIN: VSKCVND40U0329130 – German vehicle – German registration document – * Tow bar with 2,600 kg braked towing capacity – 750 kg unbraked – * Vehicle available immediately – Preferred sale to trade / export / commercial operators * Viewing by appointment only – * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not constitute warranted characteristics. * The seller assumes no liability for typographical or data transmission errors. * Subject to prior sale, changes, and errors. Special Equipment: Metallic paint, Topline package Additional Equipment: Driver and passenger airbags, active front head restraints, steering wheel audio/radio controls, automatic headlight activation, electrically adjustable and heated exterior mirrors, exterior mirrors with ground lighting, exterior mirrors with chrome trim, outside temperature display, integrated indicators in exterior mirrors, Bluetooth interface, Nissan Brake Assist system, 6-disc CD changer, roof rack, limited-slip differential, aluminum entry sills, electronic brakeforce distribution (EBD), electric front and rear windows, side protection, Bluetooth hands-free kit, front footwell lighting, center console cup holders, seatbelt pretensioners, leather handbrake lever, heated rear window, auto-dimming interior mirror, ISOFIX child seat mounts, body/cabin: double cab, body: pick-up, 2-zone automatic climate control, Comfort package, chrome front grille, lumbar support driver’s seat, height-adjustable steering column, alloy wheels, engine 2.5 l – 126 kW dCi Diesel CAT, radio preparation, 6 speakers, wheelbase 3,200 mm, full-size spare wheel, split/folding rear seat, leather gearshift/selector lever, height-adjustable front seatbelts, height-adjustable driver’s seat, sun visors with mirrors, 12V socket in center console, chrome rear bumper, partially body-colored bumpers, side steps, interior chrome door handles, tinted windows, dark-tinted rear windows, UV-protection glazing. Bodjxgldrjpfx Aktslp

Condition: new, Involute gear cutters for SYNCHROFLEX timing belts: Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T16-25 Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T26-50 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T18-28 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T29-89 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T12-20 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T46-80 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T13-17 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T18-25 Bedpfx Akszvrupetolp Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T26-40 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T46-114 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T15-20 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T10-14 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T11-16 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T80-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T18-R Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T90-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T90-R Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T10-23 Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T24-R Involute gear cutters for SYNCHROFLEX timing belts: XL 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: L 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T14-19 Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T20-R Inv

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so Bsdoz Dmn Rjpfx Aktjlp

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set -Lid: Dimensions see photos -Bore: Ø 55 mm Blsdpfxezia Rrj Aktjp -Quantity: 1 set available -Transport dimensions: 350/345/H70 mm -Weight: 5.6 kg

Condition: used, Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover -Lid: 345 x 340 mm / Dimensions see photos Bsdpfx Aszia Taoktelp -Bore: Ø 55 mm -Quantity: 1 piece available -Transport dimensions: 345/340/H60 mm -Weight: 2.8 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set -Lid: Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 set available -Transport dimensions: 350/345/H70 mm Bljdpfx Akozia Tmetsp -Weight: 5.6 kg

Condition: new, Year of construction: 2026, 750 mm RUBBER-COATED DRIVE PULLEY for SM75 belt sanders Bjdjzph Tzjpfx Aktolp Technical specifications PULLEY CONTACT AREA (W x S) 195 x 76 mm INNER BORE 22 mm

Condition: used, Transnorm conveyor belt GF 5650-600-500 RA2450 Bljdsy N E Thopfx Aktep Technical data: Conveyor length (NL): 5650 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 41 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type: 2/1 2m -Item No.: 82930533 -Lid: Dimensions 450 x 450 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: 460/460/H120 mm -Weight: 11.5 kg/set Bljdpfszhtadsx Aktep

Condition: used, empty load weight: 8,900 kg, maximum load weight: 19,080 kg, overall weight: 27,980 kg, first registration: 11/2024, loading space length: 13,650 mm, loading space width: 2,550 mm, Year of construction: 2024, gearing type: other, driver cabin: other, * German vehicle * 1st owner * Condition: see photos * 3 loading platforms * 3 double-decker levels * Electric winch * Type: Hammer Winch * Pulling capacity: 4,500 kg * Capacity: 6 passenger cars * Vans, transporters * BPW axles * Air suspension * Disc brakes * Hydraulic outriggers * Platform dimensions: Front platform, top: 5.20 m, bottom: 5.40 m * Middle platform, top: 5.10 m, bottom: 5.60 m * Rear platform, top: 2.90 m + 1.20 m outrigger * Lower platform: 2.70 m + 1.70 m outrigger * Dual tires * Spare wheel holder + spare wheel * Cable winch with pulley * Trailer length (loading extension retracted): 13,650 mm * Trailer length (loading extension extended): 15,100 mm * 2 x steel loading ramps * Storage compartment * Wabco EBS * Water tank * Work lights * GVWR 27,980 kg * Unladen weight 8,900 kg * Payload 19,080 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: Blsdpfx Ajz A Tv Sektep We strongly recommend and offer the possibility of inspecting and examining the goods, so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after arranging an appointment. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, mileage: 4,50,000 km, power: 345 kW (469.07 HP), first registration: 11/2024, fuel type: diesel, empty load weight: 8,900 kg, maximum load weight: 19,080 kg, overall weight: 27,980 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, loading space length: 13,650 mm, loading space width: 2,550 mm, Year of construction: 2024, Equipment: cabin, * German vehicle * 1st owner * Condition, see photos * 3 loading platforms * 3 double-deck configurations * Electric winch * Type: Hammer Winch * Pulling capacity: 4,500 kg * Capacity: 6 passenger cars * Vans, transporters * BPW axles * Air suspension * Disc brakes * Hydraulic outriggers * Platform dimensions: Front platform, top: 5.20 m, bottom: 5.40 m * Middle platform, top: 5.10 m, bottom: 5.60 m * Rear platform, top: 2.90 m + 1.20 m extension * Bottom platform: 2.70 m + 1.70 m extension * Dual tires * Spare wheel holder + spare wheel * Cable winch with deflector pulley * Trailer length (loading extension retracted): 13,650 mm * Trailer length (loading extension extended): 15,100 mm * 2 x steel loading ramps * Storage box * Wabco EBS * Water tank * Work lights * Gross vehicle weight (GVW): 27,980 kg * Unladen weight: 8,900 kg * Payload: 19,080 kg If a new TÜV (German technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) certificate, a new SP (safety report), or a new UVV (German accident prevention regulation). You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about its condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. Bledpfxsz A Twij Aktop All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted.

Condition: used, Year of construction: 2022, load capacity: 230 kg, empty load weight: 2,980 kg, arm reach: 10,300 mm, working height: 21,700 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 21.70 m Platform height: 19.70 m Lateral reach: 10.30 m Load capacity: max. 230 kg MACHINE DETAILS Weight: 2,980 kg Operating hours: 34 h (as of 02/05/2026) EQUIPMENT White tracks Dual-speed drive Engine-crank battery charger Support pads with bracket Electric emergency descent Preparation for winch Blsdps Afm U Hofx Aktsp Note: Minor paint scratches have been documented.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Bljdpfx Ake Agvnkotop Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Retrofit capability for max. 2 additional LLK outputs

Condition: good (used), Timing belt pulley, slewing ring, -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Mounting: Bolt circle Ø 490 mm Ø 18 / M16 Blsdpfxegyg Ano Aktep -Dimensions: see photos -Overall dimensions: Ø 520 x 200 mm -Weight: 79 kg