Used Calibration for sale (964)

Condition: ready for operation (used), Year of construction: 2023, Travel X/Y/Z: 1000mm/1500mm/800mm, max. length measurement error: 1.5 + L/375, max. single-point error: 1.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Dujdew H Avbopfx Afpjn

Condition: ready for operation (used), Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible. Djdpfx Ajun Stiefpeun

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Dedpfju Afz Rjx Afpoun

Condition: ready for operation (used), An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible. Duedpfx Afjxu I A Hepen

Condition: ready for operation (used), Year of construction: 2001, A fully equipped Zeiss coordinate measuring machine with various accessories and software licenses is available. Measuring dimensions X/Y/Z: 3000mm/1600mm/1000mm, probe head: Zeiss VAST, probe system type: VAST, software: Calypso 2023 ServicePack1_Version 7.6.04, operating hours: approx. 70914h. Machine dimensions X/Y/Z: approx. 4150mm/2450mm/3850mm, weight: approx. 12500kg. Including Zeiss air filter unit, probe rack, reference probe, 8x probe systems, calibration sphere, stand, consoles and stair platform. License transfer possible. Documentation available. On-site inspection is possible. Dujdpfx Asyhgm Eefpen

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Dedpfjw H Au Dex Afpjun

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Dedpfx Asxq Exqsfpeun

Condition: ready for operation (used), A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible. Dusdpjw R Dh Ejfx Afpen

Condition: ready for operation (used), Year of construction: 2000, A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025. Duodpfx Aswd S Unofpsn

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Dusdpfx Afev T An Sjpon

Year of construction: 2020, condition: ready for operation (used), Operating temperature: 10-300°C, setting temperature: 20-300°C, setting accuracy: up to 99.9°C: 0.1°C, from 100°C: 0.5°C, temperature sensor: 1x Pt100 DIN class A, 4-wire measurement, control: Control COCKPIT Single DISPLAY, digital PID microprocessor controller with TFT color display, timer: 1 minute to 99 days, functions: SetpointWAIT, calibration of 3 temperature values, parameter selection (temperature, circulating air motor, exhaust air, program runtime, time zones), electronically controllable air turbine adjustable in 10% steps, fresh air via adjustable exhaust flap with preheating, exhaust port with throttle valve electronically controllable, logging: storage in case of power failure, programming: data logger evaluation via Ethernet, AtmoCONTROL software optional via USB, safety: electronic temperature monitoring, mechanical limiter TB, protection class 1 (DIN 12880), self-diagnosis system, internal dimensions: 400x320x250mm, volume: 32l, max. inserts: 3, max. load: 60kg, max. load per insert: 20kg, length: 650mm, width: 660mm, height: 890mm, weight: 45kg. The oven has hardly been used. An on-site inspection is possible. Dusdjw Tl Ilspfx Afpsn

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Duodpfx Afotz Dkyjpen

Condition: ready for operation (used), Year of construction: 2016, Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Dusdpew Igvgefx Afpsn

Condition: ready for operation (used), Year of construction: 1963, A LOS material tensile testing machine is offered. Test material reinforcing steel, max. tensile force approx. 120kN, last calibration 2023, inspection possible by arrangement. Duedpfx Aexzikxefpsn

Condition: used, Year of construction: 2011, functionality: limited functionality, machine/vehicle number: 782, Technical characteristics: Measuring Capabilities - Measuring range (Z-axis): 600 mm (≈ 23.6") - Measuring range (X-axis): 200 mm (≈ 7.8") - Max. tool diameter: 400 mm (≈ 15.7") - Snap gauge diameter: Up to 100 mm (optional) Performance Features - Spindle type: High-precision SK50 spindle with integrated calibration surfaces - Spindle locking: Power-operated brake with 4 × 90° indexing - Image processing: ZOLLER »pilot« software (version 3.0) Duodjyanf Tspfx Afpon - Camera: CCD with telecentric lens and 20× magnification - Cutting edge detection: Automatic, including edges >90° - Focus system: Analog focus display with dynamic cross hairs Control & Interface - User interface: Touchscreen with graphical guidance - Manual control: Ergonomic »eQ« single-hand operating handle - Fine adjustment: Electronic control for X and Z axes - Data transfer: RFID tool identification, label printing, and CNC integration Construction & Environment - Frame: Lightweight metal with optimal thermal conductivity - Scales: Heidenhain glass scales for high measurement accuracy - Software options: Tool management, adapter calibration, concentricity/run-out programs - Mounting/Measurement interfaces: # HSK63 # HSK100 # ISO40 # ISO30/BBT30 # BMT55 Machine status: FUNCTIONAL in manual mode only. For optimal performance, overhaul by the machine supplier is recommended.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: B115.0548, Technical characteristics: Core Specifications - Temperature range: +20 °C to +300 °C - Temperature control: PID microprocessor with single display (TFT color screen) - Sensor: 1 × Pt100 DIN Class A, 4-wire circuit - Setting accuracy: • Up to 99.9 °C: 0.1 °C • From 100 °C: 0.5 °C - Volume: 32 litres - Internal dimensions (W × H × D): 400 × 320 × 250 mm - External dimensions (W × H × D): 585 × 704 × 434 mm - Max. load capacity: 60 kg (20 kg per shelf) - Number of shelves: 1 stainless steel grid (max. 3 possible) Ventilation & Heating - Circulation type: Natural convection - Heating system: Four-sided large-area heating - Fresh air control: Electronically adjustable air flap - Vent connection: With restrictor flap Electrical & Environmental - Power supply: • 230 V, 50/60 Hz, approx. 1600 W • 115 V version also available - Ambient temperature range: +5 °C to +40 °C - Humidity tolerance: Max. 80% RH, non-condensing - Altitude limit: Up to 2,000 m above sea level Control & Safety - Timer: 1 minute to 99 days - Set point WAIT function: Timer starts only after set temperature is reached - Overtemperature protection: • Electronic monitor • Mechanical safety limiter (TB), DIN 12880 Class 1 - Calibration: 3 user-selectable temperature values - Documentation: Atmo CONTROL software via USB or Ethernet - Interface languages: English, German, Spanish, French Construction & Materials - Interior: Stainless steel, electropolished - Exterior: Textured stainless steel (rear panel: zinc-plated steel) - Door: Fully insulated with 2-point compression lock - Net weight: ~45 kg Duodpfsyana Djx Afpen This oven is ideal for drying, heating, ageing, and hardening processes in research, quality control, and industrial laboratories. Machine status: WORKING

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total height: 2,200 mm, total length: 2,750 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,580 kg, grinding height: 160 mm, type of input current: three-phase, grinding belt length: 1,620 mm, workpiece width (max.): 1,350 mm, Wide Belt Sander VIET Challenge 323B – fully serviced, ready for operation. Specification: • Condition – used, comprehensive technical inspection and calibration performed • Manufacturer – VIET • Model – Challenge 323B • Working width – 1350 mm • Sanding thickness range – 3–160 mm • 3 sanding units: - First: calibrating drum, hard rubber - Second: rubber drum, lower hardness, with pneumatic engagement/disengagement - Third: soft rubber drum, with pneumatic engagement/disengagement • All drums: 240 mm diameter • Option to work with pneumatic engagement on the 2nd and 3rd drum, or in manual mode with constant height setting • Main motors: 2 x 11 kW • Machine operated via touchscreen panel with memory for various programs and settings tailored to requirements • Display shows machine error and fault messages • Continuously variable conveyor speed – variator • Electronic thickness gauge for sanded material Duodpox Nw Spsfx Afpsn • Cleaning air jets for sanding belts on 2nd and 3rd units • Reliable end-point belt oscillation • Conveyor in very good condition • Infeed and outfeed extension rollers • Digital thickness measuring device • Safety sensor preventing oversize material entry • Original factory paint • Abrasive belt size: 2620 x 1380 mm • 7 dust extraction ports • Weight: 3,580 kg • Year of manufacture: 2002 • Complete manufacturer’s documentation in Italian • Overall dimensions: 270 x 225 x 220 cm (L x W x H) Additional information: • Excellent, factory-level technical and visual condition • Photos show the actual condition of the machine for sale • Possibility to power up and test the machine on site • Listed price does not include VAT or transport costs Financing and transport: • Transport can be arranged with MDD fleet, courier services, or external carriers • Financing support available via leasing or lease loan options

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP tube with top spray ball and 2x butterfly valves NW40 Drain valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, graduated in liters) Probe port (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet   Djdpowkfwpofx Afpoun

Condition: used, SCM Sandya 600 RCS 110 Dodpfxox Uyfco Afpsun Wide-Belt Calibrating and Fine Sanding Machine The advanced sanding center for calibration, solid wood sanding, and fine veneer sanding TOP Equipment 1. Calibrating sanding unit with RA angled-grooved steel contact roller 2. Combination sanding unit with contact roller, 140 mm diameter, 85 Shore hardness, elastic MESAR sectional sanding pad with sector-wise electronic control Working width 1100 mm Main motor power 15 kW Version "B" for RCS MESAR elastic sectional sanding pad electronic programming unit "LOGIC SC screen control" electrically adjustable working height with automatic workpiece detection Roller table in infeed and outfeed for long workpieces Machine from a small workshop / LEASE REPOSSESSION First delivery 2017 available from stock Lieboch

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm Dujdpfx Aox Rdn Tsfpon 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: excellent (used), Year of construction: 2005, 272 USED Rondo pastry line. EXTERNAL DIMENSIONS (in cm): - W: 118, - L: 770, - H: 189. Dujdpfsydlyvsx Afpon EQUIPMENT: - Dough sprinkler - Calibrator - Cutting station - Water sprayer - Filling station - Rolling roller (torpedo) - Folding station - Guillotine - Various accessories. The price is a net price. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. Dusdpfx Afjyc R R Depjn The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Condition: excellent (used), Wide belt sander SCM Sandya 10 RCS Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 Duodpfxsx Svxyj Afpen 1. Calibration roller 2. Combi unit with pad CE certificate Sample photo of the machine

Condition: excellent (used), functionality: fully functional, SCM Sandya CLK Wide Belt Sander + Vacuum Dsdpfx Aex Svvfsfpjun Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Calibration roller: rubber Combi unit with shoe Extraction ports: 2x 160 mm Sample images of the machine

Condition: excellent (used), For sale: a complete set of professional measuring stations from the renowned German brand ULTRA Germany, models: • ART. 27484-032 – POS. 12 • ART. 27484-033 – POS. 10 • ART. 27484-030 – POS. 8. The devices are designed for precise positioning, inspection, and calibration of mechanical and measuring components in production and quality control processes. An ideal solution for measurement laboratories, quality departments, research centers, or tool shops requiring high repeatability and accuracy. • Construction made of high-quality steel and aluminum – robust, stable, and durable • Precision linear guides ensure smooth movement and high measurement accuracy • Height adjustment and holder locking for quick adaptation to the tested component • Capability to mount dial indicators, holders, and other measuring accessories • A reliable solution for series measurements and part positioning in production processes. Condition: used, in very good technical and visual condition – devices are fully functional, sourced from a quality control department. Price refers to Duedpfx Ajxltn Aefpsn