Used Calibrate for sale (885)

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, comes with decontamination mode !!! Overall Dimensions - inches (mm): Model NU-5510/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters Itjdpfoxbdt Iox Aansr - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - Minimum Temperature for 145 DEG Cycle 135°C Decontamination: 95 DEG Cycle 87°C - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. Itjdpfx Asxv D Dcjanjr 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: new, Promess KA-EMF20/150 Servo press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo press KN: 20 Item condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - can be found in our store! International shipping costs on request! Isdpfx Asrgn N Seanstr

Condition: refurbished (used), functionality: fully functional, !!! The unit has been calibrated for temperature and CO2. O2 sensor faulty but can be replaced !!! Temperature Control Range: ambient + 3 °C to 55 °C Temperature Deviation (time/spatial): ± 0.1 °C / ± 0.5 °C Ambient Temperature Range: 18 °C to 33 °C Itjdpexbcwfofx Aanor CO₂ Measure & Control Range: TC (thermal conductivity) sensor, 0 to 20% CO₂ Control Accuracy: ± 0.1 Humidity (constant): ≥ 95% rH Humidity Fill Amount / Water Quality: maximum 3 (units), distilled or autoclaved water Dimensions (W × H × D): 25.1 × 34.1 × 30.2 in (~ 63.7 × 86.6 × 76.8 cm) Total Volume: 5.4 cubic feet (150 L) Weight: 165 lb (~ 75 kg)

Year of construction: 2021, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have three units in stock. Price is for one unit only !!! External Dimensions (W x D x H) 620 x 730 x 905 mm Internal Dimensions (W x D x H) 490 x 523 x 665 mm Volume 165 liters Iedpfx Aoxbilpsanstr Net Weight 80 kg Temperature Control Range & Fluctuation AT +5 ~ +50, ±0.1 °C Temperature Uniformity ±0.25 °C CO2 Control Range & Fluctuation 0 ~ 20, ±0.15 % O2 Control Range & Fluctuation - Humidity Level & Fluctuation 95, ±5 %RH Temperature Sensor Thermistor Sterilisation Method H2O2 Decontamination (Optional) CO2 Sensor Dual IR O2 Sensor - Display LCD Touch Screen Exterior Material Painted Steel (rear cover not painted) Interior Material Stainless Steel Copper-Enriched Alloy Insulation Material Extruded polystyrene Heating Method Direct Heat & Air Jacket System Outer Doors 1 Outer Door Lock Optional Field Reversible Door Included Inner Doors 1 gastight - made of tempered glass Shelves 4 x Stainless Steel Copper-enriched Alloy Shelf Dimensions (W x D x H) 470 x 450 x 12 mm Max. Load Per Shelf 7 kg Max. Shelf Capacity 10 Access Port 1 Access Port Position Rear Upper Left Access Port Diameter 30 Power Failure R Out of Temperature Setting V-B-R High Temperature V-B-R Out of CO2 Setting V-B-R Out of O2 Setting - Door Open V-B Power Supply 230 V Frequency 50 Hz Noise Level 29 dB

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock. Price is for one unit only !!! Volume: 161 l Disinfection routine: Optional Itedoxbiliopfx Aansr Oxygen control: 1 - 18%, 22 - 80% Access port diameter: 30 Data logger: Yes CO2 sensor type: Infrared Chamber: Copper-enriched stainless steel Inner glass doors: 4 Humidity alert and monitoring package: No Minimum temperature: 26 Maximum temperature: 50 Touch screen controller: Yes Active humidification: No

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Itedpexbdyhsfx Aaner Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Condition: refurbished (used), functionality: fully functional, !!!We have two units in stock, price is for one unit only!!! Thermo Scientific 3951 Reach-In CO2 Incubator - Calibrated! Specification Details Capacity 821 L (29 cu ft) Temp. Range Ambient + 5 °C to 50 °C Iodpfxexaqnco Aanotr CO₂ Range 0–20% (TC sensor) Humidity < 80% (medium) or < 90% (high) with 15 L reservoir Uniformity ± 0.3 °C at 37 °C (control ±0.1 °C) Interior Dimensions 68.5 × 78.7 × 152.4 cm Exterior Dimensions 83.8 × 96.5 × 203.2 cm Weight ~227 kg (500 lb) Electrical 200/230 V, 50/60 Hz, 10 A Certification CE, UL, cUL Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, The FCA 80 is the ideal choice for processors requiring the fastest, most reliable closure for their biggest products. Industrial Throughput: Designed for continuous, high-speed operation to perfectly match the output of modern industrial vacuum fillers (like the Handtmann VF616), eliminating bottlenecks at the end of the line. Ultimate Closure Security: Automatically applies two robust Poly-clip closures, creating a hermetic, airtight seal that ensures product safety, integrity, and dramatically extends shelf life, which is vital for high-value products. Large Calibre Capability: Specifically built to handle a wide range of calibers and casing types, including fibrous, plastic, and collagen casings, making it perfect for chubs, meat logs, formed products, and large diameter sausages. Iodpfoxv Rxaex Aanotr Optimal Product Presentation: Works in synchronization with upstream stuffers to compact the product perfectly before clipping, resulting in a smooth, void-free end product—essential for high-speed slicing and retail display. Operator-Friendly: Features an intuitive control panel (often a touch screen display) for quick setup, precise program monitoring, and easy recipe changes. Reliable Engineering: Constructed from heavy-duty stainless steel with a focus on ease of cleaning and minimal maintenance downtime.

Condition: new, Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET Iedpfsx D Dfijx Aanetr 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET

Condition: new, Year of construction: 2025, operating hours: 818 h, functionality: fully functional, 400 TONS MOTOR OPERATED WORKSHOP HYDRAULIC PRESS SPEC; Tonnages : 407 Tons at 400 bars Cylinder Calibre : 360 mm, Rot Calibre:250 mm, Stroke:400 mm Motor : 15 KW 20 HP 1500 Revolutions per Minute 380 Volt Pump : 45 cc 67,5 liters 400 bar variable flow rate with power regulation(Taiwan) Lever Hand : 1 P 120 Liters Hydropack ( Import ,Erapa) Front Distance of Press : 1420 mm Side Distance of Press : 560 mm Daylight : 900 mm Stroke : 400 mm ( Safe ) Movable Cylinder : to right and left Chrome plated and hardened cylinder Emergency Button Motor : 2.2 KW 3 HP 1500 Revolutions per Minute 380 Volt Itjdpfx Aajxnm Unonjr Pump :4 cc 6 liters gear pump Hand Lever : 1/2 ‘’ Hydropax Advance Speed :11.05 mm/sec. Return Speed : 21,35 mm/sec. Oil Tank of Press :1200x1000x600 mm 575 liter Press Frame : ST 44 or ST 52 and Steel Welded Weight of Press : 5500 kg (+/- About)

Year of construction: 2015, condition: ready for operation (used), Additional Equipment LN710 5" Servo Focus Head + LN010 5" High-Accuracy Lens (2.0 MPa) PC010 2-Pallet Changer TL322 4th Gas Line (Super High Pressure, 3 MPa) XXX001 Smart Junior (Software) with Training XXX002 Donaldson Dust Collector XXX003 Set-Up Kits Ijdpfx Aasx D Nvmjnstr This Mazak SUPER TURBO-X 612 MK III G was manufactured in 2015. It features a maximum cutting area of 2000 × 4000 mm and a resonator power of 4 kW. Standard equipment includes an Automatic Nozzle Changer, Auto Calibration, and a Safety Cover. Additional features like a 2-Pallet Changer and a Dust Collector enhance its functionality. If you are looking to get high-quality cutting capabilities, consider the Mazak SUPER TURBO-X 612 MK III G machine we have for sale. Contact us for more information. Application Types Cutting

Condition: new, Year of construction: 2022, The new numerical control universal drilling machine for woodworking shops and craftsmen with very good price / performance ratio. machine incl. options: sensor for work piece calibration / measuring Iedpfsfhy R Njx Aanjtr pressure booster for drilling spindles in Z - axis automatic lubrication system incl. SCM software "Maestro cnc" qwerty keyboard 10'' Touch Screen dDrilling head and grooving operations with 11 independent spindles and integrated blade in X direction max. workpiece dimensions X-Y-Z = 3000 x 900 x 50 mm min. workpiecedimensions X-Y-Z = 300 x 90 x 10 mm max. speed der X-Y axis 20 m/ min spindels in X-axis # 2 spindels in Y-axis # 2 spindels in Z-axis # 7 grooving unit saw blade DM 125 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: cabin, documentation/manual, New 12 kW Fiber Laser Cutting Machine Our goal is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as first-class service. - Includes on-site commissioning and training at your facility (approx. 1 week) - Price includes freight to your facility - Machine with automatic shuttle table - Machine bed lined with graphite plates - Machine measured and calibrated with Renishaw system (including measurement protocol) - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 8.5 x 3.5 meters required installation footprint - 12 kW laser source from MaxPhotonics (G5/German specification) - Top quality – schedule a viewing now! Cutting capabilities: - Steel sheets up to 35 mm - Stainless steel sheets up to 20 mm - Aluminum sheets up to 20 mm - Travel range: 1500 x 3000 mm - Machine controller in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows on three sides for monitoring the cutting process - Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter library - Includes nesting module - Very easy to operate - Powerful laser chiller - Machine controller in German - Extensive service and warranty - Powerful laser chiller - Optional filter extraction system Ijdpoxg Dn Aefx Aanstr Sale exclusively to commercial customers. Delivery, consultation, and sales only within Germany / Austria / Switzerland. Approximate machine dimensions: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 5500 kg Need a different laser power, table style, or table size? No problem. I will gladly provide a suitable quotation. For example: 2 kW machine from €29,990 6 kW machine from €79,900 Not sure which laser power is suitable for your application? Just call! Of course, I can perform cutting tests according to your requirements. There is a wide range of possibilities.

Condition: ready for operation (used), Year of construction: 2007, Additional Equipment Machine Units: 2 (rubber roller + segmented pad with belt cleaning) Condition: All works Maintenance: First roll and conveyor belt maintained and calibrated Itsdpfx Aasx D Sxwonor This Kundig Premium 2 1100-RE belt sander was manufactured in 2007. It features a working width of 1100 mm and can handle workpiece heights from 3 to 200 mm. The machine includes a rubber roller, segmented pad with belt cleaning, and a vacuum conveyor belt. It operates at 400 V and 57.5 A, with a power of 28.4 kW. Contact us for more information about this machine. Application Types Sanding

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! Iodpjxqggcefx Aanstr • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, laser wavelength: 1,080 nm, table length: 600 mm, table width: 800 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, workpiece weight (max.): 500 kg, input voltage: 400 V, type of cooling: water, overall weight: 2,500 kg, total length: 3,500 mm, total width: 3,500 mm, total height: 2,300 mm, door opening width: 600 mm, door opening height: 800 mm, height adjustment type: electric, Equipment: cabin, Laser cutting machine with 1.5kW fiber laser Iodex I D Nxjpfx Aanjtr (New machine) Our aim is to offer highly precise, long-term stable yet cost-effective laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library as well as first-class service are included in the scope of delivery. - Highest precision - Machine base made from natural stone - Drives by YASKAWA linear motors (and, of course, linear guides) - Axes measured and calibrated with Renishaw measuring system (with report) - Pneumatic sheet metal clamping - High precision cutting machine - 1.5kW laser source from MaxPhotonic - Finest beam diameter (20µm) - Travel range approx. 600 x 800mm - Machine control in German - Incl. nesting module - Very easy to operate - High-performance laser chiller - Table support Leasing or hire purchase is available through our financing partner. Sale is only to commercial customers. Machine dimensions approx.: Width: 190cm Height: 190cm Depth: 180cm Weight: approx. 2500kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,700 h, General Data Machine weight 15000 kg Measurements height 2250 mm Measurements depth 4895 mm Dimensions Itedpfx Asx D En Eeanor Machine Length 11000 mm Movement X-Axis Movement 3080 mm Z-Axis Movement 100 mm Y-Axis Movement 1555 mm This 3-axis LVD Electra-FL 3015 was manufactured in 2015 and features a 4kW fiber laser by Rofin/Coherent. It includes automatic shuttle tables, a cutting head with lens systems, and automatic functions for nozzle cleaning, height calibration, and gas selection. The machine supports a maximum sheet size of 3050 x 1525 mm and offers high-speed positioning. If you are looking to get high-quality cutting capabilities, consider the LVD Electra-FL 3015 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Itjdpfsudxchex Aansr Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: as good as new (ex-display), Year of construction: 2024, Laser Engraving Machine with 30 Watt Laser Power Iodpfod Ha I Sox Aanotr - Very low operating hours / used demonstration unit (approx. 10 hours) - Worth viewing - includes Windows 10 PC 64bit (with monitor/keyboard/mouse) - Fully installed and calibrated - Engraving software in German - Very easy to operate - Switch on and get started - 30 Watt fiber laser source for high-contrast and fast marking with excellent resolution (see pictures) - Wobble function, e.g. for cleaning metal components - Deep engraving possible up to 3mm - Suitable for engraving on many metals (stainless steel, brass, aluminum, etc.) and a wide variety of plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 390 x 270 x 350mm (LxWxH) - Clamping surface with M-thread mounting holes in a 50mm grid - LED work area lighting - 50mm duct connection for fume extraction - Engraving area up to 170 x 170mm - Motorized focus adjustment - Includes foot switch to start the engraving process - Leasing or hire purchase available through our financing partner Sale is exclusively to commercial customers. Delivery / consulting / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Width: 450mm Height: 800mm Depth: 750mm Weight: approx. 80kg

Year of construction: 2020, operating hours: 2,421 h, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 940 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, number of axes: 4, Control Unit Iedpsx D Hhmjfx Aanjtr Brand HEIDENHAIN Model iTNC 640 Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Ijdpfx Astwzyfeanjtr Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Year of construction: 2015, operating hours: 24,000 h, condition: ready for operation (used), General Data Measurements width 6000 mm Measurements depth 23000 mm Measurements height 2570 mm Main Drive Laser power 10 kW Additional Equipment Extraction: Donaldson DFPR08 Lubrication system: automatic Beam guidance: via light cable Automatic lower slag conveyor 1x slag drawer Itsdex D Sviopfx Aanor Suction segments under the grate Pallet table changer 2 tables Calibration station for bevel cut rotator This MICROSTEP MSF 9001.25Lr+T500 Fiber laser cutting machine was manufactured in 2015 in Slovakia. It is equipped with a 10kW laser, nLight CORONA-CFX-10000. The working area is 9000 x 2500 mm and the maximum cutting capacity is up to structural steel of 25 mm. As additional equipment the machine comes with Donaldson DFPR08 extraction equipment, automatic lubrication system and beam guidance via light cable. The machine was retrofitted in 2022. Application Types Cutting

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Ijdpeitvkusfx Aanotr Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Iodpeiz Aufsfx Aanotr Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. - Indicated prices are valid as pickup prices ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)