Used Calibration for sale (957)

Condition: refurbished (used), functionality: fully functional, !!!We have two units in stock, price is for one unit only!!! Thermo Scientific 3951 Reach-In CO2 Incubator - Calibrated! Specification Details Capacity 821 L (29 cu ft) Temp. Range Ambient + 5 °C to 50 °C Cedpfx Aexaqncsiaegu CO₂ Range 0–20% (TC sensor) Humidity < 80% (medium) or < 90% (high) with 15 L reservoir Uniformity ± 0.3 °C at 37 °C (control ±0.1 °C) Interior Dimensions 68.5 × 78.7 × 152.4 cm Exterior Dimensions 83.8 × 96.5 × 203.2 cm Weight ~227 kg (500 lb) Electrical 200/230 V, 50/60 Hz, 10 A Certification CE, UL, cUL Good working condition. Please check out our other listings as well.

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. Csdpfxexbdyhe Aiajgu - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Year of construction: 2019, operating hours: 6,483 h, condition: like new (used), functionality: fully functional, Refurbished Comandulli OMEGA 100, year 2019, 6483 working hours. All bearings changed, new belt. Machine like new. Tested. Guarantee 1 year. Cgjdpfx Asxudl Djiaeu

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW - 4 upper 15 kW - 5 upper 11 kW Cgodpfjt Hmg Isx Aiaeu * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing

Year of construction: 1995, condition: excellent (used), 2 grinding aggregates with 22kW motors each Cgjdpfx Aohxvi Eeiaou Cleaning brush Smooth feed regulation Vacuum suction of the workpiece Powered receiving roller table

Condition: good (used), Lower and upper calibration line for panels, consisting of: First lower machine roller - roller - pad Second upper machine roller - roller - pad Speed variator, width 1300mm Depression for small pieces and brushes at the exit Cjdpfxou S Rcce Aiajgu

Year of construction: 2003, condition: used, Manufacturer: Zanchetta Model: Piraña Year: 2003   Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: < 85 dBA Cgedpex R Dk Iefx Aiaju Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Condition: excellent (used), DMC Topsand 2000 calibrating and sanding machine 4 Belts First group 1 roller Second group 1 roller Third group 1 electronic sectioned pad Fourth group 1 electronic sectioned pad super finisher Useful width 1350 Vacuum system on belt Cgodsi Dakrspfx Aiaju

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Csdpfx Aiowy Sqzsaogu Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t

Year of construction: 2012, condition: used, Control system with VIET IPC CONTROL color display Terminal with the possibility of memorizing program positions Automatic adjustment in real time of all the parameters necessary for processing Automatic positioning of the working thickness with gauge TM version with moving heads and fixed table (suitable to be placed in line) Feed speed from 3 to 16 mt / min Working width 1350 mm Abrasive belt length 7400 mm Working height 3 - 160 mm No. 3 working groups: * Adjustable transversal sanding unit with electronic pads T42 ET 150x7400 with 15kW motor with inverter * Adjustable transversal sanding unit with electronic pads T42 ET 150x7400 with 15kW motor with inverter Cgodpjgnz N Nefx Aiaju * Panel cleaning group in output Conveyor belt with 3kW motor with inverter Rubber conveyor belt perforated by depression Depressor for conveyor belt

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 1183, VACUUM CALIBRATION TANK G&G VA 75-6 Chamber: 1 Pipe Diameter: Max 75 mm Length: 6 meters Feed: electrically back and forth Cederqz Aujpfx Aiasgu Year of construction: 1992

Year of construction: 2000, condition: excellent (used), VACUUM CALIBRATION TANK LÜERS VT125-1-6 Chamber: 1st Pipe Diameter: Max 125mm Codpfx Asiidm Tsiasgu Length: 6 meters Feed: electrically back and forth Year of construction: 2000 Material: stainless steel

Condition: good (used), Mahr 865 SE Indicator Calibrator Mahr 865 SE Indicator Calibrator with 1505 IC Indicator + 1299 IC/S Printer Cedpfxoihpvhe Aiajgu Height adjustable table More indicator calibrators in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: used, This listing is for a Kendall Genius 2 Checker/Calibrator The Genius™ Checker & Calibrator checks the accuracy of the Genius™ tympanic thermometer and automatically recalibrates the thermometer, if necessary. In addition, the checker & calibrator has the capability to generate a test report for each thermometer tested and save it to a USB flash drive. It works with all Genius™ thermometer software revisions. The Genius™ checker and calibrator contains two independently controlled infrared calibration targets that are similar to factory calibration targets. These “blackbody” targets are designed to have efficient radiative heat transfer and produce infrared radiation that approximates the human ear at temperatures of 32.2°C (90.0°F ) and 40.6°C (105.0°F). Cjdexzgvxepfx Aiaegu

Condition: used, This listing is for the Troemner 4KG Cylindrical Calibration The unit is in full working condition and is ready for immediate use The Troemner 4 kg Certified Calibration Weight in a cylindrical design, compliant with ASTM standards, is a precision mass standard used for calibrating high-precision balances. These weights are essential for ensuring the accuracy and traceability of weighing instruments in laboratory and industrial settings. Key Specifications Material: High-grade stainless steel, such as Troemner Alloy 8, known for its uniform density, low magnetic properties, and resistance to corrosion. Design: Cylindrical shape with a protective polycarbonate case. Density: Approximately 7.95 g/cm³ at 20°C. Tolerance: Varies by ASTM class; for instance, ASTM Class 3 weights typically have tighter tolerances suitable for calibrating balances with readability as low as 0.01 g to 0.001 g. Cjdjxv Dpfspfx Aiasgu Certification: Available with ISO/IEC 17025 accredited certificates or traceable certificates, ensuring compliance with international calibration standards. .

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight The unit is in full working condition and is ready for immediate release. Codpfx Aiexv Aavjajgu This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance

Condition: used, This listing is for the Troemner 2KG Cylindrical Calibration The unit is in full working condition and is ready for immediate use The Troemner 2 kg Certified Calibration Weight in a cylindrical design, compliant with ASTM standards, is a precision mass standard used for calibrating high-precision balances. These weights are essential for ensuring the accuracy and traceability of weighing instruments in laboratory and industrial settings. Key Specifications Material: High-grade stainless steel, such as Troemner Alloy 8, known for its uniform density, low magnetic properties, and resistance to corrosion. Design: Cylindrical shape with a protective polycarbonate case. Density: Approximately 7.95 g/cm³ at 20°C. Tolerance: Varies by ASTM class; for instance, ASTM Class 3 weights typically have tighter tolerances suitable for calibrating balances with readability as low as 0.01 g to 0.001 g. Certification: Available with ISO/IEC 17025 accredited certificates or traceable certificates, ensuring compliance with international calibration standards. Cgodjxv Dn Uopfx Aiaou .

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Cedpfx Aisxv D Dceasgu Bit Depth: 16-bit grayscale

Condition: good (used), Year of construction: 1998, functionality: fully functional, working width: 1,300 mm, 1 bottom calibrating sander equipped with 3 bottom belts 30, 22, 18.5 kW 1 top calibrating sander equipped with 3 top belts Cgodpfsw A A Enox Aiasu

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, total width: 2,200 mm, total height: 2,400 mm, total length: 2,500 mm, working width: 1,300 mm, overall weight: 7,500 kg, working height: 900 mm, table height: 900 mm, power: 59 kW (80.22 HP), height adjustment type: electric, grinding belt speed: 1,400 mm/s, type of input current: three-phase, conveyor belt speed: 20 mm/s, grinding belt length: 2,640 mm, compressed air connection: 6 bar, table height adjustment: 120 mm, extraction nozzle diameter: 200 mm, power of feed motor: 4,000 W, Bottom calibrating sander for machine in production line, working width: 1300 mm, equipped with: 1 working unit: steel roller, motor: 37 kW; 1 working unit: roller, motor: 22 kW; dust cleaning brush. Cgsdpfx Ajwy Nndoiaou

Condition: new, Promess KA-EMF20/150 Servo Press 20 kN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Condition: New Calibrated: Yes Strain Gauge Amplifier: BA 62601 Financing through our bank is also available. komplett-konzept.leasingo.de Cjdpfjrgn N Sox Aiaegu Find more new and used servo presses in our shop! International shipping costs on request!

Condition: excellent (used), CATALOG NO. 7967 Cedpfx Aisza Elweaegu TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and one motor, sanding from above Working width: 1100 mm Abrasive belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 – 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st unit: Rubber-coated sanding roller, 90 Sh, 2nd unit: Fixed sanding pad & air cushion sanding pad, timer controlled Cgjdpfsy Exhwjx Aiaeu Compressed air requirement: approx. 6 bar Extraction connection diameter: 2 x 150 mm Approx. dimensions (L x W x H): 1700 x 1750 x 1800 mm Weight: approx. 1,400 kg Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Abrasive belt oscillation Abrasive belt (emergency) stop with disc brakes Table extension with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs newly covered graphite sanding pad inserts NEW bearings for return rollers NEW drive belts for the motor Note on used machinery: • Errors in technical specifications and prior sale excepted. • Stated prices are ex works - free loading! • Machines have been cleaned and tested for functionality. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect the machines on site. • Special arrangements are only possible in writing. (Enquiries are only answered if you provide your address and telephone number!)

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: Cgedjzabifjpfx Aiaju – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Cgjdpsy Naq Uofx Aiaou Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim