Used Cmm for sale (146)

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, machine/vehicle number: H32023/1001, Production line for manufacturing empty capsules Consisting of: • Mixing tank for preparing HPMC solution • Dipping process system for capsule forming with drying tunnel • Cutting machine for capsule cap • Cutting machine for capsule body • Assembly machine • Sorting system with camera inspection and freely programmable individual reject • Compressed air system with refrigeration dryer and filtration system Fsdpfxjyyq Tbs Ap Dopn • Purified water system (under 10ppm) • Clean air system • Enclosed room with several compartments and airlock, 210 m² Turnkey solution including know-how transfer, installation, training, long-term consultancy, and technical service The system is commissioned and calibrated on-site. The plant is currently fully assembled and in production. Requirements: floor that is easy to clean, sufficient electrical power supply, adequate water supply, sufficient floor load capacity.

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces, such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate that serves as a measuring table, with a laterally mounted guide system, enabling open loading from three sides. Technical Core Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary-tilt head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 µm+ (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery: Without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unobstructed Accessibility: Due to the lateral guidance of the horizontal arm, the measuring table is freely accessible, which facilitates the placement of heavy workpieces using a crane or forklift. Multi-Sensor Capability: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable bank financing for your project." Fpedjzz Hywjpfx Ap Den More new and used items can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Fpedozrvg Ujpfx Ap Don Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: ready for operation (used), Year of construction: 2020, total height: 2,700 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 2,350 kg, product length (max.): 2,100 mm, number of axes: 3, This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. • Max. distance between table and probe holder (without probe): 668 mm • Max. distance between columns at table height: 650 mm • Usable granite slab area: 650 x 1700 mm • Max. loadable workpiece weight: 650 kg Additional equipment Fpedpsx D Hvqofx Ap Dsn • PH10MQ touch probe system with SP25M-2 • FCR25-L6 touch probe changer • ARCO Presoft software

Condition: excellent (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 800 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020. Type: CMM CONTURA 9/18/8 Year of manufacture: 2020 Operating voltage: 100–240 V Frequency: 50–60 Hz We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one. The data, taken directly from Zeiss's service log (as of June 2025): - 10,284 operating hours - 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km) - Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it Fpedpfxjzuzf Ie Ap Djn - Zero significant component replacements - Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it. Probe head: VAST XT Gold Software: Calypso CNC 7.2 + QS-Stat-out Included accessories: PC, monitors, sensor rack Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories. Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary) It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use. If you have any questions or need further information, please send us a message or call us.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: N0038312, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: documentation/manual, type plate available, For sale: Manual Mitutoyo Crysta Plus M 544 CMM – complete, calibrated 2023 Manual Mitutoyo Crysta Plus M 544 three-dimensional measuring machine (CMM) for sale. Features: - Measuring volume: X=500 mm / Y=400 mm / Z=400 mm - Serial number: N0038312 — Ref. 196-472-NL - MCOSMOS V2.4R12 software (GEOPAK + PartManager) - Renishaw MH20i + TP20-SF probing system Included in the sale: - Dedicated PC (Windows XP Pro, HP monitor, keyboard/mouse) - Complete probe kit (cross with 4 probes Ø1mm, Ø2, Ø3, Ø4) - Calibration sphere Ø19.9956 mm with ISO 17025 certificate (2023) - Mitutoyo France calibration certificate No. 23042801 — compliant, May 2023 - Complete operating manuals (GEOPAK v2.0 and v2.4, Geopak-Win Editor, PartManager) Fsdpfx Apey U Urdj Dopn Machine can be viewed and tested while powered on. For sale due to internal reorganization. In perfect working order.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0007306, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, CRYSTA PLUS M 7106 Manual Coordinate Measuring Machine 1. 1 piece 8,500.00 8,500.00 Measuring range: X=700 Y=1000 Z=600 Length deviation of measurement: E=(4.5+0.45L/100) * High accuracy * Unlimited micro-feed capability for traversing (point acquisition) Fpsdpfozkakbox Ap Don * Self-adjusting air bearings * Quiet operation with minimum air consumption * Granite measuring table * Precision glass scales * Software for MS-Windows NT/2000/XP/WIN 7 * Upgrade from MCOSMOS Manual V2 to V4 * Computer - personal computer * LED monitor DELL 24" * Ceramic calibration sphere for SMS - diameter 20mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Fpodpsyam S Sjfx Ap Den

Condition: excellent (used), FARO Titanium Arm 2.4 m 3D coordinate measuring arm with PLANOLITH measuring table Description For sale is a used FARO Titanium Arm 3D coordinate measuring system with a PLANOLITH granite measuring table and extensive measuring and documentation accessories. The portable measuring arm is designed for industrial measuring and testing tasks, quality control, and the geometric measurement of components. Technical data Manufacturer: FARO Model: Titanium Arm Equipment type: Mobile 3D coordinate measuring arm / Portable CMM Date of manufacture: 06.12.2004 Revision: 21.0 Measuring range: 2.4 m Single Point: 0.051 mm Volumetric accuracy: ±0.072 mm Certification date according to nameplate: 07.06.2016 Country of manufacture: Switzerland PLANOLITH measuring table Accuracy class: DIN 876/1 Permissible deviation: 0.022 mm Actual deviation: 0.00498 mm Weight of granite plate: approx. 460 kg Table dimensions: approx. 1200 × 800 × 940 mm (L × W × H) Total weight of table: approx. 560 kg Equipment FARO Titanium Arm PLANOLITH granite measuring plate with base frame FARO transport case Measuring probe and extensive measuring accessories as shown in the pictures Accessory case Magnetic clamping plate Cables FARO manuals and documentation Software/data carriers as shown in the pictures Additional accessories as shown in the pictures Transport data Footprint of measuring table: approx. 1200 × 800 mm Height of measuring table: approx. 940 mm Weight of granite plate: approx. 460 kg Total weight of table: approx. 560 kg Transport by freight forwarder possible. Condition Used. Fpjdpfx Asz Hm Ngjp Den Optical condition as shown in the pictures. Scope of delivery FARO Titanium Arm with PLANOLITH measuring table, transport case, measuring accessories, documentation, and additional accessories as shown in the pictures. Availability by arrangement. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Fpedpfozvrmxex Ap Den Complete with case as pictured

Condition: like new (used), Year of construction: 2021, Hexagon Global S 07.10.07 – coordinate measuring machine (CMM) The Hexagon Global S is a high-end coordinate measuring machine (CMM) designed for precise dimensional inspection of parts in the automotive, aerospace, medical, and precision manufacturing industries. Its portal-style construction, made of granite and aluminum, ensures high rigidity, thermal stability, and excellent measurement repeatability. Measuring range: * X-axis: 700 mm * Y-axis: 1000 mm * Z-axis: 700 mm The machine enables geometric measurements according to GD&T standards, first article inspection (FAI), SPC analysis, and comparison of parts with a CAD model. Equipment shown in the pictures: * Hexagon/Leitz measuring head with automatic stylus changing. * Probe magazine with multiple stylus configurations. * Joystick control for manual positioning. * Computer with Hexagon measuring software. * Granite measuring table. * Set of professional part fixturing systems. * Additional set of extensions, adapters, and components for probe configuration. * Three-jaw chuck for mounting rotating parts. Applications: * Measurement of milled and turned parts, * Inspection of molds and tools, * Measurement of automotive and aerospace parts, * Production inspection, * Quality control for serial and single parts. Year of manufacture: 2021 Fpjdpfx Ajzkkihsp Don PC DIMIS software version 2024.2, offline and online version valid until August 2026 The machine is in excellent condition. Optionally, a Hexagon service can be ordered to inspect, secure, prepare, and load the machine onto the customer's vehicle. This service is subject to an additional fee.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration Fodpfx Ajdyc Uajp Djpn

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. Fsdpfoy Dcivox Ap Depn The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 200101521101, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2026, Equipment: type plate available, For sale is a ZEISS CONTURA 7/10/6 coordinate measuring machine (CMM) with a ZEISS VAST XT gold scanning probe system and a C99 control panel. The machine is located in Velbert (North Rhine-Westphalia) and was last calibrated in February 2026. Manufacturer: Zeiss Model: SYS CONTURA 7/10/6 Part number: 623564.9010.000 Serial number: 200101521101 Year of manufacture: 01/2001 Automatic probe changer, 5 positions Measuring software: ZEISS CALYPSO 2021, version 7.2.08 Last major maintenance including calibration: 02/2026, performed by Zeiss Fpedpfx Ajz Duv Aop Djn Condition: used / operational Machine type: Coordinate measuring machine AVAILABLE FROM JANUARY 2027 Disassembly and transport are to be arranged by the buyer. If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Leitz Reference HP 5.4.3 was manufactured in 2020. It features a measuring range of 500 × 400 × 300 mm and includes a granite table, Hexagon LSP-X3 probe system, and a Leitz controller. If you are looking to get high-quality coordinate measuring capabilities, consider the Leitz Reference HP 5.4.3 CMM machine we have for sale. Contact us for further details. • Viewing: Possible by appointment; machine can be seen running • Incoterm/Collection: EXW Technical specifications • Accuracy (MPE-E): 0.70 + L/400 µm • Probing error (MPE-P): 0.80 µm • Table: Granite table • Probe system: Hexagon LSP-X3 • Stylus clamping: HP-S-X3 • Stylus changer: Hexagon 5-port stylus change rack • Change ports: HR-X3-P • Controller: Leitz controller in free-standing cabinet • Operator control: Leitz twin-joystick panel with emergency stop Machine history / service • Aug 2020: Machine and accessories supplied new by Hexagon Metrology • Sep 2020: Software bundle supplied by Hexagon • Feb 2021: 6 additional M2 stepped styli purchased • Apr 2021: Installed and commissioned in Andover by a Hexagon engineer (Installation/service report ref. 15320) • Last calibration: 16 May 2023 by Hexagon Metrology • Standard: ISO 10360-2:2001 • Certificate: CAA/REF769/543/16052023 • Result: Calibration met customer specification • Certificate available on request • Calibration validity: until 24 May 2024 Additional equipment • QUINDOS version 2023 • I++ Simulator + QUINDOS bundle • Additional CMM model • Licence manager for add-on bundle • Software licence transfer: subject to confirmation by Hexagon Peripherals and fixturing • HP workstation PC with 2 monitors • Kinematic fixturing: • Swift-Fix universal kinematic base (1) • Swift-Fix kinematic plates 300 × 300 × 16 mm (2) • Ceramic reference sphere Ø30 mm (1) Styli, holders, adapters, and change hardware • HR-X3-P changer ports (5) • Stylus kit • Special stylus holders (3) • 8 × M5 + 8 × Ø2 mm stylus holder (1) • M5/M2 stylus adapter (1) • M2 5-way stylus holder (1) • M2 stepped styli: 4 + 6 Fedpoz H Tmrofx Ap Dopn • M2 stylus R1 (1) • Special Ø0.3 mm ruby styli (8) • Special Ø1 mm ruby/carbide stylus (1) • Ø1.5 mm Si3N4 stylus (1) • Ø3 × 35 mm ruby stylus (1) • Ø3 × 50 mm ruby stylus (1) • Ø5 × 60 mm ruby stylus (1) • Titanium extension (1) • Rotary joint (1) • Adjustable cubes (2) • M5 cube (1)

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Fjdpfew D R Nqjx Ap Depn Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200711, compressed air connection: 6 bar, type of input current: AC, Equipment: documentation/manual, Bührs (W+D) BB700 16K inserting system with Müller Apparatebau cut-sheet front end, built 2008. Currently in daily production at our site in Barnstaple, North Devon, UK. Viewing under power available by appointment. MACHINE DETAILS - Model: Bührs BB 700 16K, serial no. 200711, built 2008 - Speed: up to 16,000 mailpieces per hour (single page) - Total mailpieces: 25,932,497 (September 2026). Individual feeder counts available on request. - Feeders: 8 insert stations (7 x RF2 rotary, plus RF2K friction feeder on station 8) and envelope feeder - Envelope sizes: C4, C5 and DL - Integrity: Lake Image Systems camera reading system (v02.06.27) with 4 cameras fitted for full matching: one on the Müller front end, two on insert stations and one on the envelope station. Capacity for up to 8 cameras. Lake camera PC runs Windows XP; standalone operation recommended. - Software: W+D BSC 3.0 (03_03_24_00), Inserter 03_02_63_00, Bührs IBC controller 2.4.2.0 - Delivery conveyor included - Power: 400/230 V three-phase + N + PE, 50 Hz, 11.4 kVA total load, 25 A max fuse (BB700 plate rated 5 kW) - Compressed air: 6 bar filtered, 945 Nl/min MÜLLER FRONT END (model / serial) - Cut sheet feeder: 6687c / 54787 - Transport unit: 6995c / 57255 - Spacer: 6975c / 57230 - Accumulator C4: 6999c / 61322 - Accumulator C5: 6895c / 55307 - Folders: 6826c / 58116 and 6822c / 57630 - Exit transports: 6989c / 57997 and 6815c / 58037 CURRENT CONFIGURATION The line has been modified from the original OEM layout (original June 2011 W+D drawing included in the pictures for reference only): - One RF2 feeder station added (original: 6 x RF2 + 1 x RF2K) - Müller front end reconfigured with folders and a C5 accumulator added - Turnover belt section, MT100 mailtable, distance module and eject gate removed. Output leg now approx. 3.5 m (originally 7.5 m). - Power and air figures are taken from the original drawing, which included the removed modules, so actual demand is likely to be lower. Please confirm as-installed dimensions on site before planning installation or transport. SERVICE AND MAINTENANCE Fpodpfx Apez Iy Tne Don - Annual service by BW Converting, most recently August 2026, including a rebuild of the crossover section - Accumulator EPROM upgrade fitted January 2026 - Maintained in-house by our own engineering team, with daily safety checks and weekly, monthly and quarterly PMs against documented checklists - Full CMMS maintenance history available from August 2024 - All manuals available, in physical and digital copies REMOVAL Collection only. The buyer is responsible for decommissioning, removal and transport. We do not arrange decommissioning or delivery.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 900 mm, number of axes: 3, This 3-axis ZEISS Contura 9/12/8 RDS was manufactured in 2019. It features a power rating of up to 600 VA, making it suitable for various applications. If you are looking to get high-quality measurement capabilities, consider the ZEISS Contura 9/12/8 RDS CMM machine we have for sale. Contact us for further details. - Revision: REV 02- Electrical Phase/Supply: 1/N/PE- Voltage: 100-240 V~- Frequency: 50-60 Hz- Power Rating: max. 600 VA Fpjdpfx Apsz Iycps Djn

Condition: used, Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50 Measuring probe for measuring machine Serial: 77501 - A Fedpfxjrnagpo Ap Dopn Probe holder Probe body TP20 for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Probe mounting M8 thread Head mounting with MS shaft Ø 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180° socket - 5 M8 threaded connections for probes (4 blanking plugs) total weight 280g used in good condition

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Fodjzx Uwxopfx Ap Djpn Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm Fsdpfx Ajdyl H Nop Dspn - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: reconditioned (used), Year of construction: 2025, operating hours: 16 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, input voltage: 230 V, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, On behalf of the customer: 3D coordinate measuring machine Hexagon Optiv443 used multi-sensor CMM with camera, probe Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! • Measuring range of individual sensor: 400x400x300mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. workpiece weight: glass plate approx. 30kg Mufjyo Fpodpjd Ah Nxofx Ap Djn • Accuracy: MPEE = 2.9 + L/100 [?m] • Year of manufacture 2014 • Software: Vision3D with option for Opticheck3D • Incl. camera with CNC zoom • Incl. 6-way probe changer • Incl. switching probe HP-TM • Incl. LED ring light • Incl. calibration standard • Incl. 2-monitor operation • Incl. new Windows 10 Professional evaluation station • Incl. Opticheck3D 4.5 evaluation software (12 months free software update) SYMBOL IMAGE (sister machine)

Condition: used, Year of construction: 2004, WENZEL SCM 500 Smart Coordinate Measuring Machine in well-maintained and fully functional condition. The machine features a robust and compact design, specifically engineered for flexible use directly in the production environment or inside the measuring room. Combined with high-precision guideways, this proven structure ensures excellent measuring accuracy, stability, and outstanding repeatability within a minimal footprint. The SCM 500 Smart is designed for reliable, fast deployment in quality assurance as well as near-line series production, delivering consistent measuring results even under demanding shop-floor conditions. Prior to delivery, the machine will be fully inspected and subjected to a test run by our service technicians in Remscheid to guarantee complete functionality. The system is currently powered up and can be inspected and demonstrated at any time. PC System & Operating System (Upgraded): The machine is already equipped with a modern, high-performance PC system running the latest Windows 11 operating system. The entire configuration meets the current requirements of WENZEL, has been comprehensively tested, and operates with absolute stability, ensuring the CMM is immediately ready for integration into your processes. Optional Services (Subject to Agreement): - Installation and commissioning of the measuring machine within NRW (North Rhine-Westphalia) - Generation of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Determination of probing uncertainty in accordance with DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training courses for the WM | Quartis measuring software - Contract programming for your components Additional Information: Fjdezkug Rspfx Ap Depn Upon request, the machine can be retrofitted with a suitable Renishaw probe system (e.g., PH10 or other upgrade options). The retrofit includes additional services as well as supplementary hardware components, which will adjust the purchase price accordingly. Further software modules, customizations, individual accessories, and clamping systems are available upon request – perfectly matched to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 450 Measuring range Z: 400 mm Measurement uncertainty: Eo = 8,0 + L/250 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2030 PC System: Windows 11 Probing system: TP20 Probe head: PH6 Probe module: 1 × TP20 Standard Force Module Joystick: HT400 Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Measuring range X = 640 mm Fodpfxswb Dn Us Ap Dspn Measuring range Y = 600 mm Measuring range Z = 500 mm Function: CNC Resolution 0,5 um Max workpiece weight 300 kgs Max. speed 600 mm/sec² Air supply min. 5 bar Dimensions L = 1040 mm Dimensions W = 940 mm Dimensions H = 2320 mm

Condition: refurbished (used), Year of construction: 2015, operating hours: 250 h, In the client's order: 3D coordinate measuring machine Hexagon Optiv 432 used multi-sensor CMM with camera, push button • Measuring range single sensor: 400x300x200mm • Dimensions: 1232x910x1663mm Mufjyo • Weight: about 940kg • Max. Workpiece weight: glass plate approx. 30kg • Accuracy: MPEE = 2.9 + L / 100 [? M] • built in 2014 • Software: Vision3D with option on Opticheck3D • incl. Camera with CNC zoom • incl. 6-fold button changer • Including switching push-buttons HP-TM • incl. LED ring light • incl. Calibration standard • incl. 2-monitor operation • incl. New Windows 7 Ultimate evaluation station • incl. Opticheck3D 4.5 evaluation software (12 months free software update) Fodpfx Aedy Hlhop Djpn SYMBOL IMAGE OF THE MANUFACTURER (All rights reserved by Hexagon Metrology)