Used Cap Cooler for sale (2,843)

Condition: used, BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open-circuit cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are priorities. Technology Patented BACross III fill media system, which allows for easy inspection of the fill to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Bsdpfxjynkbme Aptelp Maintenance access: A large, inward-swinging access door and internal maintenance platforms allow technicians to conveniently perform inspections while standing inside the unit. Hygiene control: The design minimizes standing water and protects against sunlight through special air inlet elements, reducing algae growth. Flexibility: The single-sided air intake allows the cooling tower to be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial cooling: Used in factories for process cooling. HVAC: Used in large building complexes as part of a central chiller system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity, as the actual performance depends entirely on the thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the warm water inlet temperature (e.g., 35 °C) and the cold water outlet temperature (e.g., 29 °C). Air volume flow: According to BAC's technical data, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three installed 11.0 kW fan motors. If this air volume is reduced by a frequency inverter (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of power the tower can provide. Technical Data: Fan and Air Data - Air volume flow: 60.0 m³/s (generated in suction operation) - Fan motors: 3x 11.0 kW (axial fans) - Technology: Integrated belt drive - Water flow: 198 l/s Hydraulic Connections - Water inlet: 1x DN 250 (nominal size ND 250 mm) - Water outlet: 1x DN 300 (nominal size ND 300 mm) - Make-up water connection: 1x DN 40 (ND 40 mm) - Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions and Weights - Operating weight: 11,446 kg (including water fill up to overflow) - Shipping weight: 5,350 kg (empty weight) - Heaviest single part: 3,114 kg (for installation)

Condition: used, Year of construction: 2014, functionality: fully functional, Güntner Axial Fan Condenser. Bodpfxeygyd Ij Aptslp Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU).

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), type of cooling: air, Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Bledpfsvllxdsx Aptsp Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: used, empty load weight: 6,100 kg, maximum load weight: 11,900 kg, overall weight: 18,000 kg, first registration: 05/2014, total width: 2,550 mm, Equipment: ABS, EBS, cooling unit, Key Features Internal Reference: 25493M Chassis Number: AH1 814 870 8143 77 Serial Number: 313.453.923 Vehicle Model: AH18 Carrier Supra 950 TK Vehicle Make: FABAG Product Category: Refrigerated Trailer Condition: Used Date of First Registration: 05/15/2014 Last Inspection (MOT/TÜV): 04/30/2025 Suspension: Air-Air Blsdpfsz Hrl Hjx Aptep Cab Vehicle Equipment: ABS, EBS Axles & Tires Axle Configuration: - Axle 1: 385/55 R22.5, Disc brakes, Air suspension Axle 2: 385/55 R22.5, Disc brakes, Air suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight (GVW): 18000 Payload: 11900 Unladen Weight: 6100 Vehicle Width: 2550 Body Body Manufacturer: Fabag Body Year of Manufacture: 2014 Refrigeration Unit Refrigeration Unit Make: Carrier Zones: 2-zone Suitable for Frozen Goods: Yes Refrigeration Unit Year: 2014

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Bledjucnzwopfx Aptep Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, machine/vehicle number: TP121, Used AROL 8 head capping machine - 16000 BPHTechnical Specifications & Performance DataThis rotary capping machine is engineered for high-efficiency closure application on PET bottles across beverage and food sectors. Manufactured by Arol, it features an 8-head rotary configuration designed to deliver stable throughput and precise cap application at industrial speeds. Its compact footprint and ergonomic working height support streamlined operation within modern bottling equipment layouts and industrial packaging environments.Manufacturer: ArolMachine type: Rotary Capping MachineModel: 8 testeNo. of capping heads: 8Maximum speed: up to 16,000 bphContainer material: PETNeck/closure specification: 38 mm threadRotation direction: CounterclockwiseTransfer type: Body handlingMaximum bottle height: 320 mmWorking table height (H): 1200 mmElectrical supply: 400 V, 3 PH, 50 HzAdvanced Automation & Control SystemsBuilt for consistency and reliability, this rotary capper supports precise application of 38 mm plastic screw closures on PET containers. The 8-head turret ensures uniform torque distribution and repeatable performance across sustained production runs. The electrical configuration (400 V, 3-phase, 50 Hz) aligns with common industrial power standards, facilitating straightforward integration with existing control panels and line PLCs. Quick format adjustments and operator-friendly settings help reduce changeover times and improve uptime in beverage production and industrial packaging operations.Production Line Integration CapabilitiesThe machine integrates seamlessly into a used bottling line or a new installation as a standalone capper. Counterclockwise rotation and body-handling transfer allow smooth infeed/outfeed with standard conveyors. A cap elevator is available as a separate option to automate cap feeding and maintain continuous operation. Bottle handling supports PET formats within a height range up to 320 mm, enabling multi-product flexibility across water, soft drinks, wine, beer, milk, and oil lines.Machine Condition & Maintenance HistoryThe unit is ready for operation. It has been overhauled and is offered with a 6-month warranty. Supplied with compatible spare parts, it is presented in ready-to-use condition and available on an “as seen and approved” basis—ideal for facilities seeking a dependable second hand capper with minimized commissioning time.Operational Performance & VersatilityDesigned for PET containers with a 38 mm threaded neck, this rotary capper suits a wide scope of beverage and food applications. It is an excellent fit for water (still and sparkling), soft drinks (CSD), wine, beer, milk, and edible oil. The 8-head configuration balances speed and gentle handling, maintaining product integrity and closure quality at up to 16,000 bottles per hour. Its industrial-grade build and precise head motion support consistent sealing performance within demanding production schedules.Installation Re... Bledpfx Asz E Dkrsptjp

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Bsdpfx Apst Tfbqstjlp Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Bodpfxsz Hckmo Aptelp Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Automatic bottle capping machine for plastic caps. The machine features stepless speed and output adjustment. Number of capping heads: 8 pcs Capacity: 6,000 bph Total power: 4.0 kW Weight: 1,500 kg Bedpfx Apsxz Ehmstolp Used machine

Condition: used, Year of construction: 2024, Manufacturer : Transvis Model : TR7 Year : 2024 Type: All-in-one unit: dosing, filling and capping machine rotary table with indexing mechanism Hopper / Feed tank Automated dosing system Blow/suction station Filling station Screwdriving station Capping station Ejection station Bsdpfx Apjyxr Uwetjlp Outfeed conveyor Three operator stations for manual loading / feeding of the machine. HMI with Omron PLC Dimensions maximales du produit pouvant être utilisé: Ø 50 mm x hauteur 160 mm Volume mini / maxi pouvant être dosé : 1 mL/ 500 mL (selon pistons) Cadence maximale: 30 coups /mn. Technical documentation available.

Condition: used, Type ICS/C 1.6-838-2x8/115 Model: North - West spiral belt with 2 x 8 tiers Bledpfx Ajz Har Ujptop nett belt width ± 830 mm product height: max. ± 150 mm Capacity: ± 1.000 kg/hr at 90min Siemens control Belt washing and drying system Additional in- and out-feed conveyor belts: 2-track Dimensions (l x w x h) : ± 10.300 x 4.660 x 2.780 mm yoc 2011 3 x 400V, 50 Hz, 160A

Year of construction: 2021, condition: ready for operation (used), A Kematec MBK 1 AR clocked rotary bottle capper is available. On-site viewing is possible. Bodpfxeympdqs Aptolp

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 950 kW (1,291.64 HP), overall weight: 8,300 kg, total width: 2,260 mm, total length: 9,600 mm, total height: 2,300 mm, Equipment: cooling unit, Five Carrier chillers are available, all in excellent working condition. Bedszz Itxjpfx Aptslp

Condition: like new (used), Industrial Linear Cooler – Stainless Steel Industrial linear cooler in stainless steel, designed for the continuous cooling of food products after cooking, scalding, pasteurization, or other heat treatment processes. The equipment allows for the gradual and controlled reduction of the product temperature as it moves through the different cooling zones, providing a high-capacity solution for continuous processing industrial lines. Its stainless steel construction, long processing length, and integrated transport system make it especially suitable for fruit, vegetable, canning, frozen food plants, and other food applications. MAIN FEATURES - Type: Industrial linear cooler - Application: Continuous cooling of food products - Continuous processing system - Automatic product transport - Several sections/process zones - Water circulation and distribution system - Integrated process pipes, pumps, and valves - Primarily stainless steel construction - Robust structure for industrial operation - Large treatment surface - Continuous discharge system - Top access for inspection and cleaning - Hygienic design for the food industry - Integrable into automatic processing lines PROCESS The product from a previous thermal stage enters the linear cooler continuously, where it is transported through the different zones of the equipment. During the process, the product temperature is gradually reduced using a water-cooling system, according to the configuration and operating conditions of the installation. The linear design provides a controlled dwell time and allows for maintaining a continuous product flow between the different production phases. It can be installed after: - Linear cookers - Scalders - Heat treatment systems - Vegetable preparation lines - Pasteurization processes And subsequently connected to: Bledpfxjx S Iu Te Aptop - Inspection belts - Draining systems - Sorting equipment - IQF freezing tunnels - Filling and packaging machines - Weighing and dosing systems APPLICATIONS Especially suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and other food industries that need to quickly reduce the product temperature after a thermal stage. Depending on its configuration, it can be used with vegetables, legumes, fruits, and other food products processed continuously. Its large capacity, stainless steel construction, and linear configuration provide a robust solution for continuous cooking and cooling industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2019, condition: ready for operation (used), A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible. Bedexqqmgjpfx Aptslp

Condition: excellent (used), Year of construction: 2008, 355 USED WP Aroma Cooler, a device for rapid cooling of bread and baked goods. TECHNICAL DATA: - Cooling temperature to: +18°C EXTERNAL DIMENSIONS (in cm): - height 305, - width 130, - length 227. INTERNAL DIMENSIONS (in cm): - height 198, Bljdpfx Apoywummjtsp - width 78, - length 187. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 56676/1, ambient temperature (max.): 200 °C, ambient temperature (min.): 10 °C, pressure: 16 bar, total width: 845 mm, total length: 945 mm, total height: 360 mm, warranty duration: 36 months, I have 4 industrial water coolers for sale. If you purchase all 4 units, I will include 2 fans free of charge. External dimensions: Width: 85 cm Length (parallel to the tubes): 94 cm Height: 36 cm Weight: I estimate it to be well over 100 kg. This cooler can withstand a pressure of up to 10 bar, and the test pressure is 16.2 bar. Bljdpfx Ajzlbwljptjp Operating temperature: 10-200°C Capacity: up to 54 liters!!! - This guarantees efficient heat exchange for a large volume of coolant. The coolers are new and have never been installed. They can be used before a chiller, initially exchanging heat with the environment, which will guarantee significant energy savings at almost no cost, as the water chiller will need to use much less energy to cool the medium.

Condition: used, z.B. for Borelli Alexa / Futura screw capper Blsdpfxs Ahlfme Aptsp

Condition: used, Year of construction: 2008, machine/vehicle number: TP128, Used AROL Pick & Place capping machine 10000 BPHTechnical Specifications & Performance DataThis Arol capping machine is designed for the closure stage of a used bottling line, applying T caps and plastic screw caps to bottles. Its pick-and-place capping system supports accurate cap handling and controlled application in beverage production and industrial packaging operations.Manufacturer: ArolYear: 2008Maximum output: up to 10,000 bottles per hourCapping system: Pick-and-placeCap types: T cap and plastic screw capRotation direction: ClockwiseDocumented head configuration: 8 heads, with references to 6 T-cap heads and 6 screw-capping headsAdvanced Automation & Control SystemsThe pick-and-place system is intended to position caps before closure, supporting repeatable capping operations at line speed. Clockwise rotation is specified for the machine configuration. During refurbishment, the capping head setup, cap delivery components, sensors, drives, and control functions can be assessed to ensure correct synchronization between bottle handling and cap application.The machine can be incorporated into an automated bottling equipment layout with suitable infeed and discharge transfer systems. Its cap-handling arrangement is relevant for facilities processing different closure styles, subject to the installed tooling and bottle-neck compatibility.Production Line Integration CapabilitiesThis capping machine is suited to installation downstream of a filling machine and upstream of labeling, inspection, or secondary packaging equipment. It can form part of a second hand bottling line for PET and Glass bottles, where reliable closure application is essential before bottles continue to the next packaging stage.For industrial packaging and beverage production, conveyors must present bottles consistently to the capping carousel and remove closed bottles without interrupting line flow. Bottle guides, starwheels, cap feed arrangements, and change parts should be matched to the required bottle profile, neck finish, cap dimensions, and closure type.Machine Condition & Maintenance HistoryThe machine is under maintenance and requires refurbishment. This status makes it appropriate for buyers planning a technical review and overhaul before commissioning. A refurbishment programme can focus on the mechanical condition of the capping heads, pick-and-place mechanism, cap transfer components, rotary transmission, and bottle-handling interfaces.Inspection of wear parts, lubrication points, guarding, electrical components, and format-related tooling is important before the machine is returned to service. The stated 2008 manufacturing year provides useful context for planning servicing, replacement parts, and integration into an existing production line.Operational Performance & VersatilityThe Arol capping machine combines T-cap and plastic screw-cap capability with a pick-and-place operating principle. This makes it relevant where a bottling operation requires dedicated closure handling for bottles fitted with these cap styles. The specified maximum capacity of up to 10,000 bottles p... Bledpez E Dihofx Aptsp

Condition: new, functionality: fully functional, Drum Cooler CCn -120/70 for powder coatings Main unit, including • Cooling calender with stainless steel cover, steel belt and crusher unit • Additional edge sealing parts • Stainless steel mainframe, rails Akzo standard • Additional safety switch monitoring working position • Water collecting tank stainless steel • Airknife and rubber scraper • LEV taper in crusher housing top Bljdpfx Apew Snfdotjp • LEV product outlet funnel • Sliding cover after calender • Lototo Switches with trapped key for crusher and calender hood • Software and Hardware integration of safety switch of safety inlet device incl. safety PLC extension. Safety switch from BBA Innova, all other hardware from customer side.

Condition: excellent (used), GUALAPACK FLEXTECH CHP30-RS Automatic Bag Filling and Capping Machine – Stainless Steel GUALAPACK FLEXTECH CHP30-RS automatic filling and capping machine, designed for the automatic filling and sealing of flexible pouches with spouts and caps in industrial food packaging lines. The equipment integrates the operations of pouch feeding, positioning, filling, and capping in a single unit, providing an automatic and continuous process, and reducing manual handling of the packaging. Its construction, mainly in stainless steel, together with the comprehensive safety enclosure and automatic handling systems, makes it particularly suitable for professional food product lines in pouch format. MAIN FEATURES -Manufacturer: GUALAPACK / FLEXTECH -Model: CHP30-RS -Type: Automatic bag filling and capping machine -Format: Flexible pouch with spout -Automatic product filling -Automatic cap placement and sealing -Automatic pouch handling and positioning -Continuous industrial operation -Integrated transport system -Construction mainly in stainless steel -Perimeter enclosure with safety guards -Integrated control panel -Pneumatic and electromechanical drive systems Bledpfxjzxcbls Aptep -Designed for automatic packaging lines -Integrable with upstream and downstream equipment in the line PROCESS The GUALAPACK FLEXTECH CHP30-RS is designed to automate the packaging of products in flexible pouches equipped with spouts. The pouches are automatically fed and positioned in the work stations. Then, the product is dispensed through the spout, followed by the placement and sealing of the cap. Once filled and sealed, the pouches are discharged to continue to the next operations of inspection, control, or packaging. It can be integrated with: -Product feeding systems -Sanitary tanks and pumps -Dosing systems -Pouch feeders -Cap feeders -Weight checkers -Metal detectors -Inspection systems -Conveyors -Case packers and end-of-line equipment APPLICATIONS Particularly suitable for manufacturers of baby food, purees, fruit preparations, sauces, dairy products, beverages and other liquid or semi-liquid products packaged in pouches with spouts. The combination of GUALAPACK FLEXTECH technology, automatic filling, and integrated capping provides a complete industrial solution for spouted pouch packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2017, condition: used, Manufacturer : Transvis Type: Semi-automatic cap screwdriver Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g HMI control panel Asynchronous motor power: 0.18 kW Bodpfoy H Rfqjx Aptelp Two-hand control Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: TP109, Used Capping Machine AVE 6T up to 7000 bph Bsdpjvgvabjfx Aptolp The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this format for its reliability. Additionally, the machine rotates clockwise, aligning with standard bottling line layouts and reducing the need for costly modifications. Its compact design, moreover, integrates smoothly into existing production environments, even when space is tight.  Safety Features and User-Friendly Maintenance The used capping machine AVE 6T up to 7000 bp enhances safety by incorporating advanced protective features. For instance, these systems shield operators from potential risks, reducing accidents and improving workplace safety. Furthermore, the safety mechanisms allow operators to access and maintain them quickly, ensuring consistent compliance with industry standards. The technical manuals of Stelvin Lux, in addition, offer clear instructions for installation, maintenance, and troubleshooting. These guides, therefore, enable operators to resolve issues efficiently, minimizing downtime and preserving productivity. Additionally, the machine’s modular design allows technicians to replace components quickly, streamlining maintenance tasks and lowering repair costs. Current State and Electrical Requirements The machine for Stelvin Lux currently remains in storage, ready for immediate installation on a new production line. Moreover, it operates at 400 V, with a power requirement of 3 kW and a frequency of 5 Hz. Therefore, users should verify these specifications to confirm compatibility with their existing electrical systems. Furthermore, the machine’s low energy consumption supports production facilities in reducing operational costs without compromising performance. Robust Performance and Durability of Stelvin Lux Thi machine withstands demanding production environments with its durable construction. Notably, its six capping heads ensure consistent quality in every operation, maintaining high production standards. Consequently, businesses rely on this machine to meet ambitious production goals while preserving the integrity of their products. Moreover, its precision and efficiency make it a valuable asset for any bottling operation. Conclusion of teh Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph offers an effective and reliable solution for bottling operations. In particular, it boosts efficiency by combining precise capping heads, strong safety features, and simple maintenance requirements. Additionally, its seamless compatibility with standard production lines and energy-efficient operation provide ...

Condition: used, Year of construction: 2016, Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  - Formats: Flat 38 mm plastic caps - Dimensions: L 210 cm × W 75 cm × H 300 cm Bodpfjw T S Raox Aptolp - Power supply: 0.2 kW - Application: PET bottles Scope of Delivery - Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 - Centrifugal distributor | Sacmi | - | 1997 - Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997

Condition: excellent (used), Twist-Off Automatic Capping Machine EMERITO 2.8 – Jar Sealer The EMERITO 2.8 automatic Twist-Off capping machine is designed for the automatic placement and sealing of Twist-Off metal caps onto glass jars in industrial food packaging lines. Manufactured by EMERITO, the machine automates the process of feeding, positioning, and sealing the caps, providing a uniform and continuous seal for the containers before subsequent processing, labeling, or packaging stages. Its construction, primarily in stainless steel, integrated conveyor, and automatic sealing system make it particularly suitable for canning and professional jar packaging lines. MAIN FEATURES -Manufacturer: EMERITO -Model: 2.8 -Type: Automatic Twist-Off capping/sealing machine Blsdpfx Apszw Hngotsp -Application: jars and glass containers -Sealing with Twist-Off metal caps -Automatic container feeding -Automatic cap positioning and sealing -Integrated container conveyor -Continuous industrial operation -Motorized sealing system -Construction primarily in stainless steel -Integrated control panel -Adjustments for adaptation to the installed format -Hygienic design for the food industry -Integrable into automatic filling and packaging lines APPLICATION The EMERITO 2.8 is designed to automate the sealing of jars using Twist-Off caps. The pre-filled containers are transported to the sealing area, where the cap is positioned on the jar and subsequently adjusted using the capping system. Once sealed, the containers automatically continue to the next stage of production. It can be integrated with: Filling and dispensing machines Cap feeders Jar conveyors Inspection systems Container washers and dryers Pasteurizers Autoclaves Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Especially suitable for canning industries, manufacturers of sauces, jams, pickles, vegetables, prepared dishes, and other foods packaged in glass jars. The EMERITO 2.8 provides an automatic solution for lines that require continuous, uniform, and reliable Twist-Off sealing, and can be integrated into both existing facilities and complete packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.