Used Capstan Lathe for sale (5,363)

Condition: ready for operation (used), Functionality: fully functional, Small manual Turning-machine/Lathe 1IC611V with quick locking collet chuck. Klslhowbdmkscdwusr With Machine 4 collets. More collets is possible to buy, ~25EUR/pc.

Condition: used, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,650 mm, mast type: triplex, construction height: 2,660 mm, fork carriage width: 1,030 mm, fork length: 1,200 mm, total length: 23,000 mm, drive type: Elektro, construction width: 1,280 mm, net weight: 4,791 kg, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm Mast type: Triplex Klolhcet Ddv Isdwusr Technical condition: Good Front tires type: Non marking Rear tires Type: Non Marking

Condition: used, 630x4000 Kelhcdwecncgheujlr Under power.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 2,876 h, Functionality: fully functional, turning length: 750 mm, turning diameter: 320 mm, spindle speed (max.): 3,550 rpm, controller manufacturer: Siemens, TECHNICAL DETAILS Turning diameter: 320 mm Turning length: 750 mm Diameter – standard tool over support: 150 mm Cross travel: 185 mm Spindle bore: 52 mm Control: Siemens Spindle and drive Speed: 14–3,550 rpm Gear ratios: 2 Quill stroke: 120 mm Rapid stroke: 6 m/min MACHINE DETAILS Space requirement: approx. 2,600 x 1,440 x 1,440 mm Machine weight: approx. 2,000 kg Spindle hours: 2,876 h (machine originates from a training workshop) Total power requirement: 10 kW Kelhov Untvecdwujlr

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, turning diameter: 70 mm, travel distance X-axis: 352 mm, travel distance Z-axis: 250 mm, rotational speed (max.): 5,000 rpm, controller model: Fanuc Series 0i Mate-TD, TECHNICAL DETAILS X-travel: 352 mm Z-travel: 250 mm Speed: max. 5,000 rpm Tool positions: 8 Throughput: 42 mm Turning diameter over tool carrier: 70 mm Control: Fanuc Series 0i Mate-TD Kjlhcdwewa Rzfeuslr EQUIPMENT - Parts catcher - Chip conveyor - Power chuck D135 mm - Collet holder 173E

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, turning diameter: 344 mm, travel distance X-axis: 207 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 760 mm, bar passage: 65 mm, controller model: Mazatrol Matrix, Machine with counter spindle and two turrets, each with three axes! TECHNICAL DETAILS Swing diameter – max.: 370 mm / 320 mm Machining diameter – max.: 344 mm / 210 mm Bar capacity – max.: 65 mm Travel paths Klolhcdewburkewusr X1 / X2 axis travel: 207 mm / 141 mm Y1 / Y2 axis travel: 100 mm / 70 mm Z1 / Z2 axis travel: 760 mm / 815 mm Main spindle Speed range: 5,000 rpm Drive power (40% / 100%): 22 kW / 15 kW Spindle bore: 76 mm C-axis: 0.0001° Counter spindle Speed range: 5,000 rpm Drive power (25%): 22 kW / 15 kW C-axis: 0.0001° Tool turret Number of positions: 2 × 12 Tool shank height: 25 mm Boring bar diameter: 40 mm Driven tools Speed: 6,000 rpm Drive power: 5.5 kW MACHINE DETAILS Machine weight: 12,500 kg Machine dimensions (L × W × H): 3,510 × 2,810 × 2,480 mm EQUIPMENT - Interface bar feeder - LNS Sprint 565 bar feeder - Additional coolant nozzles on main and counter spindle - Hainbuch Spanntop Nova Axfix SK 65 (main spindle) - Kitagawa B-208 (counter spindle) - Workpiece unloading device with conveyor belt - C-axis Counter spindle 0.0001° - High-pressure coolant 70 bar - Mayfran Consep 2000 II chip conveyor, right-hand ejection - Signal light (yellow)

Condition: good (used), Year of construction: 2001, Functionality: fully functional, spindle speed (max.): 4,500 rpm, turning diameter: 300 mm, turning length: 110 mm, spindle diameter: 260 mm, Delivery: approx. 6,000 € to each port - CIF; shipping costs, insurance and freight to the port of destination Provision: either FCA from location or CIF from port of choice TECHNICAL DETAILS Number of axes: 4-axis Control: GE Fanuc Series 18i TB Turning diameter: 300 mm Turning length: 110 mm Spindle speed: max. 4,500 rpm Spindle diameter: 260 mm Spindle holder: VDI 40 Kljlhcdwovhcclouor EQUIPMENT - Complete accessories - manuals

Year of construction: 2013, Condition: good (used), Center Height - 800 Swing over Bed -1580 Kslhcovvqhxodwuslr Swing over Cross Slide -1140 Width of Bed - 800 Distance Between Centers - 4000 Rapid Travel Speed (Z / X) - 5/5 Z-axis Travel, Max - 1750-9750 X-axis Travel, Max - 800 Z-axis Ball Screw - Ø80* X-axis Ball Screw - Ø50 Quill Diameter - Ø200 Quill Taper - MT7 Quill Travel - 300

Condition: used, Year of construction: 2012, CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 1400 run hours ! Available immediately. Kolhcoc S S Spedwujlr

Condition: good (used), Year of construction: 2014, Functionality: fully functional, 2 pieces available for sale SMEC PL25 (SAMSUNG) YEAR OF CONSTRUCTION2014 TURNING LENGTH 520mm Kloljwdgtrjhcdwusr MAX. TURNING DIAMETER 380mm MAX. TURNING LENGTH 600mm CHUCK 10' SPINDLE MOTOR 22 KW BORE DIAMETER 77mm SPINDLE SPEED 3500 RPM TURRET : 10 STATION 25x25

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 2002.1023-01, turning diameter: 420 mm, center width: 1,200 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens Sinumerik 840, Extensive accessory package included! TECHNICAL DETAILS Turning diameter: 420 mm Center distance: 1,200 mm Spindle bore: 51 mm Speed: max. 3,000 rpm Center height: 210 mm Klslhcdewa Rnfowujr Control: Siemens Sinumerik 840 MACHINE DETAILS Dimensions (L x W x H): 2,700 x 1,300 x 1,800 mm Weight: approx. 3,500 kg Power supply: 400 V - 3 AV - 50 Hz EQUIPMENT - Steady rest - Collet chuck 173E (Ortlieb) - Parat base holder - 14 Parat tool holders (WD2/25) - Machine feet - Schunk Rota-G D200 key bar chuck - Live center - Machine documentation (operating manual / programming manual / Electrical circuit diagram / data backup on CD)

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Center high 290 mm Between centers 1000 mm Kelhswdvmzocdwuolr Swing dia over bed 580 mm Swind dia over cross slide 380 mm X travel 295 mm Travel of hand slide 135 mm Spindle speed 20-2000 rpm (21 ranges) Motor power 7,5/11 kW Spindle hole D70 mm Spindle nose DIN55027 (8-er) Tailstock sleeve MT5 Feedrate longitudinal 0,04-12 mm/rev. (120 ranges) Feedrate cross 0,02-6 mm/rev. (120 ranges) Weight cca 2860 Kgs Accessories - Steady rest - Following rest - Faceplate - 3 jaws chuck - Machine working light - Rapid feed

Condition: used, Year of construction: 2020, Hwacheon CUTEX 180BL YSMC year 2020 KOREA Control FANUC iSeries Driven Tools Kslswdhhwehcdwujlr Y axis Subspindle 2x C axis Axis-Stroke (X / Y / Z) 220 / 110 / 580mm Spindle power kW 15 / 11 Spindle speed 4500rpm Bar capacity 65mm Main Chuck 210mm Subspindle Chuck 170mm Turret 12 (24 Positions Index) Turet BMT-55 Tool probe Renishaw Parts Catcher equipment with machine: -Bar Feeder Samsys -Chip conveyor -Coolant tank -Books machine -4 driven Tools 2/2 -8 static tool holders

Condition: used, Year of construction: 2019, Chuck - 12” Length - 1200mm Controller - Fanuc Oi Mate-TD Klelhjv Thr Aecdwujr

Condition: reconditioned (used), turning height: 4,800 mm, workpiece weight (max.): 1,25,000 kg, turning diameter: 16,000 mm, year of last overhaul: 2025, Single Column Vertical Turning Lathe Blansko model SKSJ 1A equipped with one vertical head for turning and milling operations completely retrofitted in 2025 Technical characteristics: Face plate diameter 6300 mm Bottom flange diameter 6370 mm Outer diameter, achieved at maximum distance of column 11200 mm Maximum height of the workpiece 4800mm Max. turning diameter with column near the faceplate 8000mm Max. turning diameter with column at the maximum distance (for internal turning) 16000mm Kslhcdev R D N Eewuslr Max. distance from the cutting tool and faceplate 2565mm Infinitely variable rotation of the faceplate 0.5 – 20rpm The maximum weight of work piece clamped on faceplate 125 tons The machine is completely retrofitted and supplied with the following brand new components: - New electrical cabinet made with CE components (Siemens, Schrack, etc.) -New Siemens 828 numerical control, 100 kW main drive motor, 27 Nm feeds motors and ZF reducers with 1/5 ratio - New Ballscrew on 2 axis (vertical head and crossrail) - New Scales on 2 axis Heidenhain - The hydraulic and support installations made with CE components (Rexroth, Brevini, Atos, etc.) - New Oiling installation DROPSA-Italy or similar; - Geometrical precision as per ISO norms (like a new machine); - New painting. The machine has possibility of milling without control of faceplate position. It can do a drilling and a circular milling and positioning without control loop. The machine is under power ready for inspection in Bucharest. For more information please contact us.

Condition: excellent (used), CATALOGUE NUMBER 6901 TECHNICAL DATA - max. turning length 1200mm - max. turning diameter 210mm - max. turning diameter with standard steady rest 90mm - max. size of square material for turning with automatic feeding 100mm Kelhcjkqui Rjdwujlr - 3 hydraulic copiers - additional 3 knives on hydraulic pistons (2 pieces installed) - 4 types of spindle speeds - automatic or manual machine operation - 9kW headstock spindle motor - 3kW hydraulic pump motor - diameter of the exhaust port 90mm - dimensions for transport length/width/height 3700x2100x2000mm - weight approx. 3000kg ADVANTAGES - Italian production - automatic hydraulic copier - original DTR documentation - unpainted - used lathe, condition very good Net price: PLN 69,900 Net price: EUR 16,450 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: good (used), Functionality: fully functional, . Technical data : Tip height 110 mm Center width 160 mm Spindle bore 23 mm Kslewduwljhcdwuslr . 3 speed ranges , approx. 0.65 kW , speed 1 700 rpm 1.0 kW , speed 2 1420 rpm 1.3 kW , speed 3 2880 rpm . - Cross support and 4-fold stops - Tilting tailstock with 2 quills, with electric reversal of direction of rotation for - Thread cutting device .

Condition: used, Year of construction: 2005, Control FANUC Oi-TC. Axes X, Z, C. 12-positions head. With accessories - see photos. Kelhcowcl U Ejdwuolr Including bar feeder EMT SUPER 80 . Max. working diameter ... 284 mm Min. working diameter ... 12 mm Max. tool diameter ... 32 mm Max. revolutions ... 5000 rpm Machine dimensions V x H x D ... 2100 x 1600 x 1850 mm Length including chip conveyor ... 3350 mm Machine weight ... 2794 kg

Condition: good (used), Year of construction: 2011, Center high 230 mm Between centers 1500 mm Swing dia over bed 465 mm Swing dia over cross slide 270 mm Swing dia in bridge 690 mm Length of bridge 240 mm Spindle hole 58 mm Spindle face CAMLOCK D1-6 Spindle taper MT 6 Speed range 25 – 2000 rpm (12 ranges) Klolhcdowb Dm Dswuor Tailstock taper MT 4 Pinole travel 128 mm Spindle power 5,5 kW Weight 1720 kgs Dimensions LxWxH = 2700 x 1080 x 1370 mm Accessories - SINO 3 axis D.R.O. - 3 jaws chuck D250 mm - Tailstock - Coolant unit - 4-fold toolholder

Condition: good (used), Year of construction: 2005, Chuck Size - 203.2 mm Keljvuw Trehcdwujlr Bar Capacity - 51.816 mm# Axis2Power - 14.9 kW Max RPM - 4,800 RPMTurning Dia - 249.94 mm Controller - Fanuc oi-TB

Condition: good (used), Year of construction: 1982, Lathe TOS SU50A 500X1000 Kjlhotk N Ewjcdwujlr Main technical data: Swing over bed: 500 mm Swing over carriage: 250 mm Distance between centers: 1000 mm Spindle bore: 56 mm Spindle speed – range 11.2-1400 rpm Working feed – number of degrees 87 Working feed – range 0.027-3.8 mm / min Total power input of the machine: 11 kW Lathe weight 3000kg For more details please contact us.

Condition: excellent (used), Year of construction: 1991, CNC vertical lathe with tool changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/retrofit Siemens 828D (retrofit) Faceplate diameter: 1,400 mm Face plate load: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger input bore: min. 340 mm Kjlhetx Au Hecdwuolr Number of rams: 1 Ram cross travel: X 1,900 (+/- 950) mm ram vertical travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverse: X,Z 8,000 mm/min. Crossbeam vertical travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm. Gear stage: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on faceplate: max. 40,000 Nm Automatic tool changer: Tool magazine positions: 20 Tool radius: max. 200 mm Tool length: max. 675 mm Accessories: Large tool pack; Large spare parts package; Large package of clamping jaws; Full cladding; Chip conveyor; Coolant system; New coolant and flood coolant pumps. Condition: Very good condition. The mechanical condition is very good. Completely new electrics and Siemens 828D Siemens ONE system. The machine works with very high accuracy. Offer number V(K)-6899

Condition: good (used), Fanuc Controller : Fanuc oi-T Klelhcdwevuv Tkjusr

Condition: good (used), Heavy duty lathe SKODA SIU 1600X10000 CNC Siemens YOM 1978 The machine was completely retrofitted and upgraded with CNC in 2002. Main technical data: • face plate diameter: 1500mm • max. swing over bed: 1600mm • max. swing over slide: 1250mm • height of centers: 800mm • distance between centers: 10000mm • max. weight of the workpiece: 40ton • speed range of the main spindle: 0.45 – 224rpm • main drive motor: 55KW • Machine weight: from. 46700kg Kslhcev Srm Iodwuslr Equipped with: - Siemens CNC 802 - Haidenhein scales - 4 steady rest For more information please contact us.

Condition: excellent (used), Year of construction: 1995, turning height: 3,200 mm, turning diameter: 3,300 mm, feed length Z-axis: 1,700 mm, faceplate diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 2,000 rpm, year of last overhaul: 2020, CNC vertical lathe with C-axis + milling spindle Doerries Scharmann VC-3500/300 year of construction 1995 Fanuc 18iTB Kolhcdeqy Nmajwuolr Faceplate diameter: 3,000 mm Faceplate load: max. 50,000 kg Turning diameter: max. 3,300 mm Turning height: max. 3,200 mm Travel distances: X -2,550 / +2,550 mm Z 1,700 mm Crossbeam vertical travel: W 1,800 mm Support sleeve size: 250 x 250 mm Rapid traverse: X/Z 6,000 mm/min. Table drive power: 105 kW Table speeds: 0.6 - 110 rpm. Torque at table: max. 140,000 Nm C-axis: 0.001° Tool magazine positions: max. 27 Driven positions: max. 17 Milling spindle speeds: 10 - 2,000 rpm Milling spindle drive power: 22 kW Tool holder: BT50 Accessories: Extended + retrofitted Retrofit + update/extension 2020 Condition: Very good Offer number V(K)-6834