Used Carousel lathe for sale (4,868)

Carousel lathe CNC controlled

Call

Condition: ready for operation (used), Device in working order condition as shown in the picture T2rpm8uy

more

Listing

Sonnenbühl

6,844 km

HNK VTC-20/30

Call

Condition: excellent (used), Year of construction: 2007, CAPACITY: -MAX. EXTERNAL DIAMETER OF TURNING: 3000MM -MAX. SWING: 3000MM -MIN. INTERNAL DIAMETER OF TURNING (RAM PASSING THROUGH): 350MM -DISTANCE FROM TABLE SURFACE UPTO LOWER TIP OF TOOL HOLDER (STANDARD TOOL LENGTH: 200MM): 1800MM -LOADING CAPACITY OF TABLE: 12,000KG *TABLE: -DIAMETER: 2000MM -ROTATION: LOW=1~65.9 RPM / HIGH=73.9~160RPM -RANGE OF SPEED: 2 STEP / INFINITE (S4 INSTRUCTION) -MAX. TORQUE: 2900KG-M (55KW, 18.5RPM) -SUPPORT: THRUST ROLL BEARING TYPE=860 TMP1001-P5 /TAPER ROLLER BEARING TYPE=32240-P5 -LUBRICATION: COMPULSIVE CIRCULATION *CNC CONTROL: -TYPE: FANUC 18iTB -3 AXES CONTROLLED: X, Z, C -3 AXES CONTROLLED SIMULTANEOUSLY: X, Z, C -MINIMUM CONTROL: 0.001MM -MAXIMUM INSTRUCTION: +/- 8 DIGITS 1) CENTROL CONTROL SYSTEM: IN ADDITION TO OPERATION CONTROL BOARD, SUB CONTROL BOARD IS ATTACHED SEPARATELY. 2) CNC CONTROLLER: DESIGNATION OF CONFIGURATION, TOOL SELECTION AND OPERATION AUTOMATICALLY SETTLED. THE INFORMATION CAN BE MEMORIZED, SAVED, CALLED OUT, AND STORED. 3) EC PANEL IS FOR HYDRAULIC WORKING, POSITIONING AND OPERATING. THE SYSTEM IS CONNECTED WITH CNC CONTROLLER, SUPPLIED WITH POWER, AND CAN COMMUNICATE WITH EACH CONTROLLER. EACH CIRCUIT OF EC PANEL HAS PROTECTION EQUIPMENT. 8dwqdrns77 GROUND CONNECTION: EACH CIRCUIT HAS ITS OWN EARTH CONNECTION. EARTH CONNECT IS ISOLATED AND MAIN EARTH CONNECT IS LAID UNDER THE GROUND SEPARATELY. 4) A SAFETY DEVICE PROTECTS OPERATOR AND MACHINE BY COVER OF ROTATING PART, EACH LOCKING DEVICE, EMERGENCY STOP BUTTON AND MOVEMENT LIMITER. *MOTORS: -FOR DRIVING TABLE: AC SPINDLE 45/55 KW, FANUC MODEL a50 -FOR MOVING RAM HEAD TO LEFT/RIGHT (X AXIS): AC SERVO 7KW, FANUC MODEL a30/3000i -FOR MOVING RAM UP AND DOWN (Z AXIS): AC SERVO 7KW, FANUC MODEL a30b/3000i -FOR DRIVING LUBRICATION PUMP: AC 0.75KW X 2 PIECES -FOR DRIVING HYDRAULIC UNIT PUMP: AC 5.5KW -FOR SUPPLYING RAM HEAD SADDLE WITH LUBRICATING OIL (X, Z AXES): AC 120W X 2PIECES -FOR COOLANT PUMP: AC 1.5KW -FOR DRIVING CHIP CONVEYORS: AC0.75KW *ELECTRICITY: -MAIN CIRCUIT: AC 3PH 220V 50/60HZ -CONTROL: AC 1PH 220V 50/60HZ -CAPACITY: 120KVA -SURROUNDING TEMPERATURE: MIN. 0˚C~MAX. 45˚C -CHANGE IN TEMPERATURE: 1.1˚C/MIN. -HUMIDITY: NORMAL=70 %( RELATIVE HUMIDITY), MAXIMUM HUMIDITY =95% (FOR A SHORT PERIOD OF TIME) -ACCESSORIES: ONE SET OF MAIN BOARD, ONE SET OF STANDING SWITCH BOX (MAIN OPERATION BOARD), ONE SET OF MANUAL TYPE PULSE GENERATOR BOX, ONE SET OF TRANSFORMERS -STANDARD REQUIREMENTS OF ELECTRICAL DEVICES: 1) MAS, 2) JEM 3) JIS *RAM HEAD: -TYPE: SQUARE RAM -RAM SIZE: 240MM X 240MM -MOVEMENT OF X AXIS (LEFT/RIGHT): -200 ~+2570 -MOVEMENT OF Z AXIS (UP/DOWN): 1000MM -TOOL HOLDER CLAMPING: CURVIC COUPLING TYPE -TOOL SHANK SIZE: 40 X 40 MM (STANDARD TOOL HOLDER) -BALANCING: HYDRAULIC COUNTER BALANCE -RAPID TRAVERSE OF X, Z: X-AXIS=10000 MM/MIN, Z-AXIS=10000 MM/MIN -CUTTING FEED OF X, Z: 1~3000MM/MIN -LUBRICATION TYPE OF WET GUIDE SURFACE OF X, Z: COMPULSIVE LUBRICATION *SPECIFICATIONS: -MAX. HEIGHT OF MACHINE: *6800MM (VARIABLE DEPENDING ON END USER’S REQUIREMENT) -SQUARE MEASURE FOR INSTALLATION: *7550 X 6320MM (VARIABLE DEPENDING ON END USER’S REQUIREMENT) -WEIGHT OF MACHINE: APPROX. 57,000KG

more

Auction

Carousel lathe

Rafamet KCH 250

Condition: good (used), Year of construction: 1989, Functionality: fully functional, TECHNICAL DETAILS Swing diameter: up to 2800 mm face plate diameter: 2500 mm height under crossbeam: max. 2200 mm Kvethpava workpiece weight: max. 15.000 kg Support: 2 x vertical, 1 horizontal MACHINE DETAILS main drive: approx. 55 kW Total weight: approx. 56 t

Listing

Iserlohn

6,958 km

CNC carousel lathe

JUNGENTHAL JU8F

€28,000

Carousel lathe, vertical metal turning lathe

Call

Condition: good (used), Year of construction: 1980, CNC Karuselldrehmaschine Fabr.JUNGENTHAL type: JU8F BJ. 1980 Modenisiert 2005 control HEIDENHAIN Manaul plus 4110. Max.Drehdurchmesser: 930mm Circular diameter max: 1100 mm Internal breakdowns min: 300 mm Turning length max. 520 mm Baczn8w8li Spindle speeds: gear-unit stage 1: 0-110 RPM Gear-unit stage 2: 110-300 RPM Power of main motor screw: 55-70KW Complete machines documentaries available.

more

Listing

Wijchen

(dealership location)

7,087 km

Schiess KEF 80, 1050mm VTL

Call

Condition: used, Vertical metal turning lathe Model:&nbsp Carousel lathe Chho0273hr Manufacturer:&nbsp Schiess Type:&nbsp KEF 80 Maximum Swing/ turning diameter:&nbsp 1050mm 4-Backenf&uuml tter:&nbsp 800mm Maximum&nbsp turning height:&nbsp 800mm Machine-dimensions: 2500x1800x2900mm

more

Listing

Höf

6,471 km

Carousel lathe

DÖRRIES SDE 125

Call

Condition: ready for operation (used), Year of construction: 2002, Vertical lathe - single column / Make: DÖRRIES Type: SDE 125 year of construction: 1975, modernization CNC control in 2002 The machine can be inspected under power to be inspected. Condition: Functional / ready for operation. Ucf7nk0 TECHNICAL DATA: - three-jaw chuck diameter: 1.250 mm - Swing diameter max.: 1.500 mm - distance from three-jaw chuck to lower edge of toolholder 1.250 mm - cross beam adjustability V-axis : 755 mm - Support 1: Number: 1 on the crossbeam Travel Z1=650mm X1=930mm Automatic movable tool holder for 4 tools Coolant device external or internal Cross section Z1 480x460mm -Support 2: Travel Z2=445mm X2=535mm manually movable tool holder for 4 tools cross section X2 180x180mm - control: Siemens Sinumerik 840C (Conversion to CNC control in 2004 - plans newly prepared) - Speed range: M43 1-225U/min u. M44 1-300 U/min - three-jaw chuck: Forkardt P1250 So - total power requirement: 60 kW - Machine weight approx.: 26 t - Space requirement W/D/H approx.: 4.7 m x 4.4 m x 4.00 m

more

Listing

București

(dealership location)

5,507 km

LATHE 630x4000

DEMOOR lathe

Call

Condition: used, 630x4000 Under power. C2m28f7g

more

Auction

Vertical turning lathe

Gildemeister DMG CTV 250

€4,000

Condition: defective spare-parts repository (used), Year of construction: 2003, Functionality: not functional, TECHNICAL DETAILS Chuck diameter: 250 mm Face displacement stroke X: 800 mm Longitudinal stroke Z: 300 mm Rapid traverse speed X: 100 m/min Rapid traverse speed Z: 45 m/min Spindle head (flat flange): 170h5 mm Spindle diameter in front bearing: 120 mm Spindle bore: 79 mm Power of the three-phase mainlan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 - 5000 rpm Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Accuracy of the point rest: < 0.02 degrees Number of tool stations: 12 Tool holder: according to DIN 69880 Cylindrical shank diameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed: 6000 rpm Hydraulic capacity, complete: approx. 25 L Pressure: 80 bar Pressure for clamping device: 70 bar Cooling capacity: approx. 25 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Lubrication capacity: 1.8 l Rapid traverse speed Y: 10 m/min Pymmrt9t0 Feed force: 20000 N Hub: ±50 MACHINE DETAILS Net weight of the machine without chip conveyor: approx. 7500 kg Gross weight of the machine with truck transport: approx. 7800 kg Machine without chip conveyor L x W x H: approx. 2600 x 2200 x 2800 mm Total connected load: 50 kVA Voltage: 400 V Frequency: 50 Hz Fuse protection (slow-blow) according to VDE 0100: 80 A Permissible voltage fluctuation at 400 V: +/- 10% Machine acceptance: according to DIN 8605 Permissible ambient temperature: from +15 to +35°C Relative humidity: 75%. Installation altitude: 1000 m above sea level Fixed pick-up date of the machine on 27.12.23 or 09.12.23. Bidder is obliged to pick-up the machine on time.

11-axis sliding headstock automatic lathe

Auction

STAR Micronis ECAS 32 T

€25,000

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 0179 (033), Functionality: fully functional, 11-axis sliding headstock automatic lathe from STAR in very good condition and with bar loader and bar magazine -> ready for immediate use! The bar feeder fills the bars automatically to the bar magazine FMB turbo 3-36. Machine is delivered with tool holders and spare parts. TECHNICAL DETAILS Number of axes: 11 Axes: X 1-3, Y 1-3, Z 1-3, C1-2 Turning diameter over bed: 32 mm Spindle clearance: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speed: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min Bar feeder: available Bar magazine: FMB turbo 3-36 Yfshh3ps MACHINE DETAILS Machine weight: approx. 5.7 t Space requirement: approx. 10.5 x 2 x 1.9 m Supply voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Auction

Vertical lathe

EMAG VSC 200

€5,000

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Equipped with workpiece conveyor belt No minimum price - guaranteed knockdown to the highest bidder! TECHNICAL DETAILS Turning diameter: 260 mm turning length: 200 mm Control: Siemens 840 C Spindle bore diameter: 50 mm Dimensions (L x W x H): 3,160 x 1,200 x 2,650 mm Dmwcpt Machine weight: approx. 6,000 kg

Two-spindle vertical lathe

Auction

EMAG VSC 200 DUO

€15,000

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Right of first refusal for the highest bidder: in the event of a knockdown, a higher number of items can be arranged Bhwq9gdmrw8 No minimum price - guaranteed knockdown to the highest bidder! TECHNICAL DETAILS X-path: 725 mm Z-path: 200 mm Chuck diameter: 160/200 mm Rotation diameter: 725 mm Main spindle: 2 pieces Control: Siemens 840D Spindle flange (DIN 55026): 5 size Spindle bearing: 80 Ø - front Maximum speed: 6500 min-1 Spindle distance: 955 mm

Auction

Vertical lathe

EMAG VSC 200

€9,000

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Right of first refusal for the highest bidder: a higher number of units can be procured in the event of a knockdown No minimum price - guaranteed knockdown to the highest bidder! TECHNICAL DETAILS Turning diameter: 260 mm turning length: 200 mm Control: Siemens Bhwqxuwufmn Spindle bore diameter: 50 mm Dimensions (L x W x H): 3,160 x 1,200 x 2,650 mm Machine weight: approx. 6,000 kg

Auction

Lathe

Benzinger TNI B8

€15,000

Condition: repair required (used), Year of construction: 2000, Functionality: not functional, Error: Machine starts up, but the axis module of the Y-axis reports an error Special feature: the main spindle is a special spindle (71916 with short taper 5 holder and a special cylinder 4371 made by Röhm) TECHNICAL DETAILS Control: 2-channel Siemens 840 D, Turret 1: X1-, Z1- and Y1-axis Counter spindle: X2-, Z2- and Y1-axis Tool positions turret: 1x 12-fold pneumatic Tool positions counter spindle: 1x 12-fold pneumatic Holder: VDI25 with single-position drive Additional counter spindle tool positions: Spindle turret around the counter spindle with 7 VDI 16 positions Main spindle belt drive: Pneumatic hollow clamping cylinder D42 Counter spindle belt drive: pneumatic hollow clamping cylinder Unloading device: with unloading belt Coolant system: with heat exchanger Lvm7msblir Chip collection container: available

Lathe with superfinishing device

Auction

DMG MORI CTX alpha 500

€28,000

Condition: excellent (used), Year of construction: 2017, Operating hours: 2,947 h, machine/vehicle number: 0040001262C, Functionality: fully functional, 2-axis universal lathe modified with SUPFINA mod. 202 superfinishing device without superfinishing belt and with intermediate interface in the X-axis TECHNICAL DETAILS Swing diameter over guide way protection: 500 mm Bhwvef3cyds Clamping chuck diameter: 170 (210) mm Transverse stroke (X axis): 190 mm Longitudinal stroke (Z axis): 525 mm Control: SIEMENS SINUMERIK 840D solutionline operation with CELOS und ShopTurn 3G, Linux operating system. Rapid feed, X/Z axes: 30/30 m/min Y axis: 22.5 m/min Spindle nose size: 140 h5 mm Spindle diameter in front bearing: 100 mm Spindle bore diameter: 73 mm AC main drive power (100 % - 40 % ED): 13 - 14 kW Torque (100% - 40% ED): 171.5 - 192 Nm Speed range: 20 - 6000 rpm MACHINE DETAILS Electrical connection: 5 conductor system, L1, L2, L3, N, PE Connected load: total approx. 30 kVA Voltage: 400 V Frequency: 50 Hz Protection (slow-blow) acc. to VDE 0100: 63 A Permissible voltage fluctuation: at 400 V: ±10 % Dimensions without chip conveyor L x W x H: approx. 3330 x 2583 x 1829 mm Weight: approx.. 4400 kg Fixed pick-up date of the machine on 27.12.23 or 09.01.24. Bidder is obliged to pick-up the machine on time.

Auction

C-Y-axis lathe

DMG MORI CTX alpha 500

€60,000

Condition: excellent (used), Year of construction: 2008, Operating hours: 355 h, machine/vehicle number: 0045000018C, Functionality: fully functional, No minimum price - the highest bid is guaranteed to win! The machine is in a vocational school and has hardly been used - very few spindle hours! TECHNICAL DETAILS Turning length: 500 mm Y-axis stroke: ±40 mm (for cross slide) Speed: 6000 rpm C-axis: available Disk turret: Sauter 12-fold VDI 30 (driven) CNC control: Siemens 840D solutionline with ERGOline Programs: DMG MACHINEcheck, DMG AUTOshutdown and ShopTurn Drive power (100/40 % ED): 20/27 kW Drawtube inner diameter: 52 mm MACHINE DETAILS Connected load: 25 kVA Operating voltage: 400 V EQUIPMENT Tailstock Spindle brake Chip conveyor with coolant device Coolant spray gun Biizviz2wna Three-jaw power chuck with BBD 210/66 bore (made by SMW-Autoblock) Bar gripper, axial, complete, VDI 30 Workpiece pick-up device with automatic gripper arm, conveyor belt, protective flap

Auction

Lathe

FAT Haco FTM165

€70,000

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: 170803, Functionality: fully functional, Power - Precision - Performance This machine model is the most compact model from FAT Haco in the field of turning and milling centers. The machine has only been used a little and is therefore in mint condition! Including parts catcher for main and counter spindle and tool. Gpewoivph TECHNICAL DETAILS Spindle distance: 1000 mm Turning diameter over bed: 550 mm Turning diameter: 350 Speed: 6000 rpm Control system: Siemens 840 D SL Y-axis: ± 35 mm Longitudinal travel: 210 mm Rapid traverse X/Z: 35 m/min Torque: 275 Nm Spindle nose according to DIN 55026: A2-6 Spindle taper: 1:20 Counter spindle speed: 6000 rpm Counter spindle rapid traverse: 30 m/min Counter spindle torque: 95 Nm Counter spindle nose: A2-6 Tool holder: VDI 40 Tool positions: 12 Tool holder diameter: 20 mm Index time: 0.2 s Speed: 4000 rpm Quill taper: MT 4 Traversing method: automatic positioning Diameter of quill: 55 mm Tailstock stroke: 15 mm Thrust force: 4,400 N MACHINE DETAILS Dimensions: 1940 x 1860 x 3750 mm Weight: 6600 kg Power: 57 kW

Auction

Vertical lathe

Titan Umaro SC 43 - F01

€90,000

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, Contrary to the provision described above, the machine is provided EXW free loaded TECHNICAL DETAILS Table diameter: 4000 mm Faceplate diameter: 4000 mm Turning diameter: approx. 4300 mm Rotation diameter: 4300 mm Control for program: Siemens Sinumerik 840D Vertical adjustment of supports right Z1: 705 mm Vertical adjustment of supports left Z2: 990 (+200) mm Workpiece height: max. 2580 mm Workpiece weight: 18.0 t Speed: 50 - 100 rpm Cb9ts08 Height above floor to top edge of table: 1090 mm Distance between side uprights inside up to a height of 500 mm: 4,300 mm Distance between side uprights inside from a height of 500 mm: 2,580 mm Height lower edge of support/table: max. 2,250 mm Distance left support Z 2 to table: max. 2,560 mm Distance right support Z 1 to table: max. 2,550 mm Distance left to right support Z2 to Z1: max. 4,830 mm Carrier lift adjustable in height on side stand: approx. 2000 mm MACHINE DETAILS Total power requirement: 150 kW Machine weight: approx. 88.0 t Machine dimensions: 6,000 x 8,000 x 6,400 mm Footprint: 8.0 x 10.0 x 6.8 m EQUIPMENT 4x clamping elements approx. 1200 mm (additional clamping jaws optionally available) Various supports for alignment (height) lying on pallet Chip conveyor (6.9 x 1.25 x 1.1 m)

Listing

YANTRANG CNC AUTOMATION PVT LTD VTL1250 TM

Rajkot

864 km

Vertical Turnmill Lathe

YANTRANG CNC AUTOMATION PVT LTD VTL1250 TM

€1,22,800

ONO plus VAT

Call

Condition: new, Vtl 1250 TM OCTAGONE SHAPE QUILL HEAVY CAST IRON STRUCTURE MAX TURNING:1500MM FACE PLATE:1250 Bhwap9alm8b CROSS SLIDE TRAVEL: 750MM MAX JOB HEIGHT :1500 VERTICAL QUILL TRAVEL: 950

more

Listing

Taiwan

4,329 km

Facing Lathe

KRAFT FB-15 | FB-20 | FB-25 | FB-30

Call

Condition: new, :FB-15 | FB-20 | FB-25 | FB-30 turning diameter:1500|2000|2500|2500 mm faceplate diameter:1500|2000|2500|2500 mm turning length:330 mm max. workpiece length:450 mm bed width:450 mm max. workpiece weight -without tailstock:3000 kg width of cross cariage:250 mm spindle bore:155 (230 opt.) mm spindle nose:A2-11 (A2-15 opt.) spindle cone:7 MK spindle speed:4-600|4-600|4-400|4-400 1/min spindle speed steps:4 cross way of carriage:330 mm movement longitudinal:1000|1000|1500|1500 mm spindle drive:22 (29 opt.) kW servo motor X-axis:ß12/3000i 1.8kw |ß12/3000i 1.8kw|1FL6067 2.0kw|1FL6067 2.0kw servo motor Z-axis:ß22/3000i 3kw |ß22/3000i 3kw |1FL6092 3.5kw|1FL6092 3.5kw ball screw:Ø25mm x P5 x C3 (X-Achse) ball screw:Ø40mm x P10 x C5 (Z-Achse) mm rapid power traverse in X-and Z direction:6/8 m/min 3gevssq2g number of tools:4 tool post size:32x32 mm weight of the machine ca.:7000|7500|8000|10000 kg Machine size (LxWxH):2200x2200x2500|2200x2600x2750|25003000x3000x3100|3000x32 00x3350 mm tool holder:4-fach CNC controls from:Siemens/Fanuc/Fagor

more

Auction

Lathe

DMG MORI ecoTurn 450

€24,000

Condition: excellent (used), Year of construction: 2015, Operating hours: 13,115 h, machine/vehicle number: 0031000209A, Functionality: fully functional, TECHNICAL DETAILS Swivel range: max. 650 mm Movement via cross slide: 465 mm Turning diameter: max. 400 mm Transverse travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Maximum speed: 4000 rpm Controls: SIMline with operation on SIEMENS 840D solution line Rapid traverse (X/Z): 30/30 m/min Spindle head (flat flange): 170 h5 mm Bar capacity: Ø 65 / 75 mm Spindle diameter in front bearing: 130 mm Drill chuck: 250/315 Drive power (40/100% ED): 17.5 / 12.5 kW Maximum torque (40/100% ED): 370 / 280 Nm According to ISO 230-2 in X/Z axes (indirect measuring system): 8/8 μm According to ISO 230-2 for C-axis: 20 μm Number of tool positions: 12 Driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000 rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm Ljew3o0nvj MACHINE DETAILS Weight: 5800 kg Fixed pick-up date of the machine on 27.12.23 or 09.01.24. The bidder is obliged to pick up the machine on time.

Listing

Taiwan

4,329 km

CNC Vertical Lathe VTL

You Ji (Taiwan) GTH-35/45 ATC-I

Call

Condition: used, Year of construction: 2012, CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 1400 run hours !Available immediately. 290votfnm

more

Listing

București

5,510 km

Vertical turning lathe

IM.ROMAN SC33

Call

turning height: 2,300 mm, workpiece weight (max.): 18,000 kg, motor power: 60 W, turning diameter: 3,300 mm, faceplate diameter: 3,000 mm, Condition: good (used), Year of construction: 1986, Vertical Turning Lathe SC33 Manufacturer: IM.ROMAN (Romania) YOM: 1986 Main technical data: Faceplate diameter: 3000mm Max.turning diameter: 3300mm Max. working height: 2300mm Max.turning diameter with a side tool post: 3300mm Max. work piece weight: 18000kg Table speed range: 1.02-92 RPM, Working feed range: 0.05-5 mm/rev., Jqlnf9oaa Main motor power: 55 kW, Overall dimensions: 5600 x 5300 x 5400 mm, Weight: 47350 kg For more information please contact us.

more

Listing

Mažeikiai

6,087 km

CNC turning lathe

NAKAMURA-TOME TW 20

€17,000

Call

Condition: good (used), Year of construction: 1990, 2 UNITS available Ijjkcd2f CONTROL FANUC 0 CNC Lathe Technical details: Turning diameter 165 mm Turning length 200 mm Control Fanuc 18 TB X-axis 2x 195 mm Z-axis 265 (B 780) mm Bar passage 50 mm C-axis 0,001° Turning speeds: 50-5.000 U/min Tool turret with 12 work positions 2 x12 Turning speeds : 180-3600 U/ min Accessories: Chip conveyor

more

Listing

YANTRANG CNC AUTOMATION PVT LTD FLAT BED CNC LATHE

Kotharia

864 km

HEAVY DUTY CNC LATHE

YANTRANG CNC AUTOMATION PVT LTD FLAT BED CNC LATHE

€68,000

ONO plus VAT

Call

Condition: new, Year of construction: 2023, MODEL:FB1250/2000 Fzgcsnc Swing :1700mm Max turning dai:1500 Max turning lenght:ABD2000MM 4STATION HEAVY DUTY TURRET FANUC CONTROLLER

more

Listing

KRAFT GN-1000 | GN-1250 | GN-1500 | GN-1750

Taiwan

4,329 km

CNC Lathe

KRAFT GN-1000 | GN-1250 | GN-1500 | GN-1750

Call

Condition: new, :GN-1000 | GN-1250 | GN-1500 | GN-1750 turning diameter:1000|1250|1500|1750 mm turning length:1500/2000/3000/4000/5000/6000/8000 mm control:Siemens 828D turning diameter over slide:830|1080|1330|1580 mm bed width:820 mm spindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mm spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min x-travel:750 mm z-travel:2000/3000/4000/5000/6000/8000 mm rapid power traverse in X-and Z direction:6 m/min servo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mm tailstock quill diameter:200 (295 opt.) mm taper in tailstock:6 MK tool turret:8/10/12 fach tool holder -shaft diameter:32 (40 opt.) mm main drive motor:30 (37 opt.) kW weight of the machine ca.:9/10/11/12/13 t positioning accuracy:+0.01 / 300 mm repeating accuracy:+0,005 mm machine length:5000/6000/7000/8000/9000/10000 mm machine width/height:2500 x 2400 mm Wbluenfb0 max. workpiece weight between centres:9000 kg workpiece weight in steadies max.:12000 kg mit einer Lünette workpiece weight in steadies max.:15000 kg mit zwei Lünetten CNC controller:Siemens/Fanuc/Fagor servo motors:Siemens/Fanuc/Fagor fixed steady:70-400 mm steady rests:manuell und hydraulisch CNC controls from:Siemens/Fanuc/Fagor turret:4/8/12 -fach

more

Listing

Jasło

5,964 km

HWACHEON Hi tech 200Bi

Call

Condition: good (used), Year of construction: 2007, cnc lathe 2 axis Hwacheon Hi tech 200B year machine 2006/12 control Fanuc OiTC Z axis 430mm X axis 195mm turret 12 positions max turning lenght 400mm max turning diamter 350mm chuck 250mm 10 inch bar capacity 76mm with machine is : tool probe ,tailstock chip conveyor 3jugoj7m books machine , holders weight machine 4,500kg

more

Listing

Bacău

5,495 km

4m Vertical Lathe w/ DRO

REM SC 43/44

Call

Condition: ready for operation (used), Year of construction: 2023, For sale REM Vertical Turning Lathe SC 43/44 with DRO. Bqyuqbw8uq Technical Details: Faceplate Diameter: 4.000 mm Max. Turning Diameter: 4.400 mm Machining Height: 2.050 mm Max. Work Piece Weight: 18 tons DRO Control

more

Listing

Székesfehérvár

6,139 km

Cnc lathe with C axis

HURCO TMM8

Call

turning diameter over cross slide: 335 mm, turning length: 477 mm, turning diameter: 305 mm, spindle bore: 52 mm, motor power: 11 W, spindle speed (max.): 4,800 rpm, tool mount: 30 mm, overall weight: 4,400 kg, chuck outer diameter: 203 mm, Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Equipment: Rotational speed infinitely variable, HURCO WINMAX control system (graphic display, USB interface) Max. turning diameter 335 mm Max. turning diameter 305 mm Center distance 477 mm Spindle bore D52 mm Chuck diameter 203 mm 12-station turret (SAUTER), all stations are driven Speed 4800 rpm Speed of driven tools 5000 rpm Power of the driven tools 4,4 kW Drive power 11/14 kW Weight approx. 4400 kg Dimensions LxWxH approx. 3000 x 2300 x 2000 mm Shm72nnui Accessories - Software options: simulation graphics, 3D graphics, synchronous high-speed cutting - Hydraulic tailstock - Coolant system - Built-in tool measuring system - Collet chuck without collet - D200 mm, 3 jaw chucks - Machine light - Chip conveyor - Some tool holders Good condition. It can be inspected under power at our premises.

more

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

6,304 km

Heavy duty slant bed cnc lathe

DOOSAN LYNX 220 LMA

Call

Condition: good (used), Year of construction: 2008, Catalog No. : 7054 Type: LYNX 220 LMA G8bi0mfa Producer: DOOSAN Made in: 2008 Characteristic: Control system: FANUC Series Oi-TC Total hours: 11781 h Maximum-turning length: 505 mm Turning diameter over bed (max): 250 mm Maximum turning diameter: 250 mm Maximum spindle speed: 6000 1/min Workpiece weight: 130 kg Max. bar diameter: 51 mm Axis X: 175 mm Axis Z: 550 mm Length: 2410 mm Width: 1600 mm Height: 1655 mm Weight: 4000 kg

more

Listing

Rajkot

865 km

YANTRANG Hicut400/2000

US$78,400

EXW ONO plus VAT

Call

Condition: new, Year of construction: 2023, MODEL : HI CUT 400/2000 SWING DAI:700 MAX TURNING:600 MAX TURNING LENGTH FROM CHUCK FACE:1980MM CHUCK SIZE:400×3JAW (AUTOGRIP MAKE) SPINDLE NOSE:A2 11 SPINDLE BORE:121MM BAR CAPACITY:110MM TOOL TURRET 12 STATION TOOL SIZE 32×32 BORING BAR CAPACITY 50MM Dl7a82 TAILSTOCK QUILL DAI:130MM SPINDLE MOTOR POWER APLHA 18/22KW P SERIES OTHER MODEL AKSO AVAILABLE AS PER CATALOG AND AS PER REQUIREMENTS. PLEASE CONTACT US

more

Listing

Taiwan

4,329 km

CNC-Vertical Turret Lathe - Single Col.

KRAFT YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000

Call

Condition: new, :YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000 faceplate diameter:1000|1250|1600|2000 mm Mpqvx swing diameter:1350|1600|2000|2500 mm turning height:1070|1350|1350|1700 mm max. turning diameter:1150|1350|1800|2300 mm table load:4|5|8|10 t table rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/min max. torque on the faceplate:10000|12500|18500|54000 Nm Travel of Ram (vertical):800 | 900 | 900 | 1000 mm Travel of ram (horiz.):1350 | 1475 | 1650 | 2275 mm ram head dimension:230 x 230|250 x 250|250 x 250|280 x 280 mm rapid power traverse in X-and Z direction:10/12|10/12|10/12|10/10 m/min feeds:0,1 - 50 mm/U feed speeds:0 - 1260 mm/min Tool changer:12 (C-Achse mit 16) drive capacity - spindle motor:37/45| 37/45 (60/75 opt.)| 37/45 (60/75 opt.)| 37/45 (60/75 opt.) kW Machine height: 5330 |5500 |5500|6600 mm machine length:4600 |4700 |5050| 4950 mm machine width:5500 |5800 |6300|7320 mm weight of the machine ca.:24000 | 32000 |35000 | 51000 kg repeating accuracy:0,005 mm hydraulic motor:3,75 kW servo motor X-axis:7 kw servo motor Z-axis:7 kw coolant pump drive:1,5 / 1,1 kW :75 | 80 | 80 | 140 kva CNC controller:Siemens/Fanuc/Fagor coolant system:700 Liter automatic tool changer:16-fach 4-jaw faceplate Ø:s. oben CNC controls from:Siemens/Fanuc/Fagor ATC:320/60/90 fach Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

more

Listing

Jasło

5,964 km

Schütte Multispindle Lathe

HAAS TL 2

Call

Condition: good (used), Year of construction: 2007, cnc lathe Haas TL2 year 2007 Swing over bed 406 mm Swing over cross-slide 282 mm Distance centre tot centre 1219 mm Max longitudinal travel Z-axis 1219 mm Max cross travel X-axis 203 mm Spindle cone A2-6 Dia of spindle bore Ø 76 mm Power on the spindle 8,9 kW Number of speeds max 1800 rpm Command CNC Haas Total power needed 9 kVA Current needed 240 v Length L -- R 2565 mm Width Fw -- Bw 1829 mm Height 1981 mm Weight 2087 kg Nktcjm9

more

Listing

Hisar, Bursa Yalova Yolu No:7, 16600 Gemlik/Bursa, Türkiye

5,179 km

Schütte AF 42

€65,000

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 1988, -8 spindle mechanical lathe -6 and 7 stations with cnc control and chip conveyor -Automatic spindle loading Cxxxxzats9 -It is in working condition

more

Listing

Blintendorf

6,445 km

Gildemeister CTX 400

Call

Condition: ready for operation (used), Year of construction: 1993, Turning diameter: 400 mm turning length: 600 mm Total power requirement: 22-27.5 kW Savzquz3c Speed range:: 25-5000 rpm Quill holder: MK 4 Quill diameter: 80 mm Machine weight approx.: 5.5 t HEIDENHAIN CNC PILOT control - EPL 2 control - 12-position tool changer with driven tools - C-axis - Double foot switch - Chip conveyor - 3-jaw chuck

more

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

6,304 km

Masturn MT 550i

Call

Condition: good (used), Year of construction: 2016, Catalog No. : 7031 Type: MT 550i Producer: Masturn Made in: 2016 Characteristic: Control system: HEIDENHAIN Total hours: 757 h Hours on: 329 h Maximum-turning length: 800 mm Turning diameter over bed (max): 550 mm Rbzana9 Turning diameter over cross slide (max): 350 mm Maximum travel length in the X-axis: 285 mm Maximum feedrate in the Z axis: 890 mm Spindle speed: 3000 1/min Diameter of the spindle bore: 82 mm Length: 2538 mm Width: 1920 mm Height: 1755 mm Weight: 3200 kg Equipment: Duplomatic revolver head

more

Listing

Striegistal

6,568 km

Gildemeister CTX 500 E

Call

turning diameter over cross slide: 455 mm, turning length: 1,000 mm, spindle bore: 107 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 18 rpm, main spindle motor power: 23,000 W, total height: 2,130 cm, total length: 5,560 cm, total width: 2,400 cm, quill diameter: 120 mm, quill stroke: 1,200 mm, Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 01180000071, Functionality: fully functional, Circumferential diameter over bed web cover: 680 mm L9fyfxl3xt Face travel: 320 mm Longitudinal travel: 1097 mm Please refer to the images for all other technical data Video about functionality available. Machine dismantled and stored.

more

Listing

Taiwan

4,329 km

Facing Lathe

KRAFT KDB Serie

Call

Condition: new, :FBN-1500 | FBN-2000 | FBN-2500 | FBN-3000 faceplate diameter:1600|1800|2000 mm turning diameter:1600|1800|2000 mm turning length:700 mm spindle bore:230 mm spindle nose:A2-15 spindle speeds:L:10~50, M: 50~150, H: 150~400 1/min Cjn8hykshn spindle drive:37 kW travel -x axis:900|920||1020 mm travel - z:1500 mm servo motor X-axis:1FK7101, 4.3kw, 27 Nm servo motor Z-axis:1FT7105, 11.7kw, 65 Nm rapid power traverse in X-and Z direction:5 m/min weight of the machine ca.:15 t dimensions of the machine ca.:4950mm(mit Förderer: 6610mm) x 3100mm x 2750 mm Factory new, high-stability CNC head turning machine, make Kraft, type FBN series - conventional or with CNC control Siemens / Fanuc / Fagor - Optional with C-axis and additional extensive accessories - Bed lengthwise or crosswise - also available with tailstock Send us your requirements for the machine and we adapt the machine to your needs! Fig. Shows FBN-80 (turning diameter 2000mm) Benefit from the favorable leasing and hire-purchase conditions of ABC Leasing: Ask us about it! Of course, we also gladly organize for you the delivery free-of-charge including assembly / commissioning and ready for handover as well as instruction

more

Listing

Jasło

5,964 km

Index Multispindle CNC Lathe

INDEX 170MC Fanuc

Call

Condition: excellent (used), Year of construction: 2004, 2 axis machine INDEX 170M year 2004 control Fanuc OiTB chuck 6 inch bar capacity spindle 42mm z axis 400mm x axis 150mm servo turret 14 tools vdi30 tailstock Bh23jzmzaot chip conveyor with coolant tank and pomp books machine

more

Listing

Hisar, Bursa Yalova Yolu No:7, 16600 Gemlik/Bursa, Türkiye

5,179 km

INDEX MS 18-6

€1,29,000

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 2005, In the configuration 1.2-2.1 axes are X-fix Z-NC and all other axes are NC controlled Double NCU Cw9lnj023u It has Büschel, Çiller and Knoll units. High pressures 40 Bar SIR25 IEMCA driver available It is in working condition, our workbench can be seen in our Bursa Gemlik factory.

more

Listing

București

5,510 km

Vertical turret lathe

TITAN SC43CNC

Call

turning height: 3,300 mm, workpiece weight (max.): 18,000 kg, motor power: 60 W, turning diameter: 4,300 mm, faceplate diameter: 4,000 mm, Condition: good (used), Year of construction: 1987, Vertical Turning Lathe SC43 CNC equipped with one vertical head Made in Romania by TITAN Year of manufacture: 1987 Main technical data: FACE PLATE DIA. MM 4000 MAX.SWING MM 4300 MAX SWING HEIGHT MM 3300 MAX. LOADING ADMITTED KG. 18,000 FACEPLATE SPEED RANGE 1-92RPM FEEDS RANGE MM/ROT 0,05-5 CARRIAGES RAPID FEEDS MM/MIN 2500 MAIN MOTOR POWER KW 60 MACHINE WEIGHT AB. 63TON The machine has following features: - General revision of the machine; - Regrinded guideways and plating of the counter guideways with Biplast/Turcite; Bg9fxjqk09o - the hydraulic unit with components made by CE - the electrical equipment with parts made by Schneider , Shrack, Siemens - main motor 55-60KW DC Siemens with Siemens driver - the feeds drives motors – Siemens 20 Nm. - AC brushless - the CNC controller – Siemens 840D - new painting The machine is equipped with one vertical turning head controlled by CNC Siemens 840D. To the machine is granted 6 months guarantee period for spare parts. For more information please contact us.

more

Listing

Europa

6,478 km

Crankshaft Turning Lathe

HELLER DRZ 400/800/2

Call

Condition: used, Year of construction: 1996, machine/vehicle number: 44-42732, turning diameter:280 mm turning length:800 mm I2buqmngm weight of the machine ca.:16 t dimensions of the machine ca.:6,3 x 3,5 x 2,7 m number of spindles:2 number of space positions:2 spindle headstock:2 A turn-broaching center Main bearing machining crankshaft family 0 for 3-cylinder, stroke 78.6 mm 4-cylinder, stroke 72.6 mm Control uni-Pro NC 80 RX Chuck: Fa. Blessing chip conveyor Montronix tool monitoring Marposs measuring device

more

Listing

Kirchheim bei München

6,649 km

Mazak QT C 300 MY L

Call

Condition: excellent (used), Year of construction: 2018, Control unit: Mazatrol Smooth C Max. circulation diameter: 696 mm Max. turning diameter: 340 mm X-axis movement: 215 mm Y-axis movement: 100 mm Z-axis movement: 605 mm Spindle speed range: 4000 1/min Main spindle motor (25%) 15/11 kw Bar work capacity main spindle 80 mm Spindle bore 91mm Thlqz0rlm C-axis main spindle 0. 0001 degrees Y-axis Chip conveyor: Tailstock Tool turret 12 places Weight: 5350 kg

more

Listing

KRAFT DLZ 510/DLZ 560 m. stufenloser Spindeldrehzahl

Deutschland

6,760 km

Center Lathe

KRAFT DLZ 510/DLZ 560 m. stufenloser Spindeldrehzahl

€18,900

Call

Condition: new, turning diameter over bed:510|560 mm turning diameter over slide rest:305|355 mm turning length:1000/1500 mm swing in gap:735|785 bed width:350 mm max. workpiece weight between centres:450/750 kg :225 kg spindle bore:80 (105 opt.) mm spindle turning speed range:25-1600 U/min spindle nose:D1-8 Camlock longitudinal feed:0,059-1.646 mm/U cross feed:0,020-0,573 mm/U metrical thread cutting:0.2-14 mm/U threading WHITWORTH:2-112 TPI range of module thread:0,1-7 mm diameter of quill:75 mm sleeve conus:5 MK quill stroke:180 mm Bstuvq07i0 power requirement:7,5 kW stepless speed:mit DELTA Frequenzumformer :opt. Multifix center morse:2 Stück :als Fußbremse luminating devices:LED 3 jaw chuck Ø:315 4 jaw chuck:350 mm Brand new Center Lathe KRAFT DLZ 250 Series More information can be found in the appendix

more

Listing

Torbalı/Izmir, Türkei

5,295 km

Multi-Spindle CNC Lathe Machine

Takisawa NEX 110 Y

Call

turning diameter over cross slide: 560 mm, turning length: 635 mm, turning diameter: 244 mm, Condition: like new (used), Year of construction: 2020, Operating hours: 400 h, machine/vehicle number: CU06AY0031, Manufacturer Takisawa Type NEX-110Y Type CNC lathe Number of working hours 301 (November 2023) Machine is like new Y-C axis Maximum turning diameter: 560 mm Standard turning diameter: 244 mm Maximum turning length: 635 mm Bh9gmo2wmrv Control Fanuc Oi TF X-axis: 220 mm Z-axis: 710 mm Tool positions 12

more

Listing

Hisar, Bursa Yalova Yolu No:7, 16600 Gemlik/Bursa, Türkiye

5,179 km

Tornos MultiSwiss 6x16

€3,85,000

EXW Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2018, machine/vehicle number: 273-0003, Tornos Multiswiss 16-6 Multi-spindle CNC Lathe In working condition Bif7wmoltzr

more

Listing

Schwabach

6,707 km

Mechanic lathe

WEILER , Typ 260- E2

Call

Condition: good (used), Technical data : Tip width approx. 400 mm Center height over bed 130 mm 12 speeds from 125 - 2800 rpm space requirement , length x width 1,2 x 0,6 m Weight estimated approx. 400 kg . Scope of delivery : - Hand lever quick clamping device with 5 collets for round material - Multifix size A , with 1 pcs. Holder Bdv2jaah - Hand lever cross support with two 4-fold stops each - Coolant device - Hand lever drilling vice, with 4-fold stop - electrical interrogation of the part clamping lever .

more

Listing

KRAFT DLZ 660/DLZ 800 m. stufenloser Spindeldrehzahl

Deutschland

6,760 km

Center Lathe

KRAFT DLZ 660/DLZ 800 m. stufenloser Spindeldrehzahl

€26,890

Call

Condition: new, turning diameter over bed:660|800 mm turning diameter over slide rest:440|570 mm turning length:1500/200/3000 mm swing in gap:900|1035 bed width:400 mm spindle bore:105 mm spindle turning speed range:25-1600 U/min spindle nose:D1-8 Camlock longitudinal feed:0,044-1.48 mm/U cross feed:0,022-0.74 mm/U metrical thread cutting:0.45-120 mm/U threading WHITWORTH:7/16-80 TPI range of module thread:0,25-60 mm diameter of quill:90 mm sleeve conus:5 MK quill stroke:235 mm power requirement:7,5 kW weight of the machine ca.:3065/3345/3710|3175/3455/3820 kg stepless speed:mit DELTA Frequenzumformer :opt. Multifix center morse:2 Stück :als Fußbremse luminating devices:LED 3 jaw chuck Ø:315 4 jaw chuck:400 mm Brand new Center Lathe KRAFT DLZ 250 Series More information can be found in the appendix Befkzza

more

Listing

Deutschland

6,760 km

Center Lathe

KRAFT DLZ 660/DLZ 800 m. stufenloser Spindeldrehzahl

€25,900