Used Doosan for sale (252)

Condition: used, Year of construction: 2006, Doosan Puma 240B CNC Lathe (2006) With Dusan Fanuc i-Series Controller Bar feeder and chip auger Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Djdozpaxcopfx Adrswa Please note the Removal Instructions in listing, which form part of the terms of sale.

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Dodozpw Dpjpfx Adrewa Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 47 kW (63.90 HP), empty load weight: 4,850 kg, drive type: Treibgas, LPG forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Like new Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Dedpfsx Aw S Tsx Adrowa Rear tire type: Superelastic Rear tire condition: 60 - 80% Sideshift, 3rd valve, 4th valve, Half-cab,

Condition: used, Year of construction: 2012, weight max. in kg 1500 kg serial number FGA04-1290-00480 drive Treibgas weight 2800 kg length in width 940 mm ca. 2.060 mm (je nach Mas engine output ca. 34 kW kW Dedpoztfyyofx Adrewa cubic capacity 1.975 cm³ ccm

Condition: excellent (used), Year of construction: 2018, operating hours: 5,742 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: FANUC i-Series, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,500 mm, overall weight: 8,500 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,963 h, coolant supply: 20 bar, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, USED ​​"DOOSAN DNM 6700" 3-axis vertical machining center with Fanuc i-Series CNC Dodpfx Aszrn Dxodrowa

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 610 mm, turning diameter: 410 mm, spindle motor power: 18 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 81 mm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,700 mm, total length: 3,500 mm, total width: 1,700 mm, spindle nose: ASA 8, overall weight: 4,900 kg, swing diameter over top slide: 460 mm, spindle diameter: 255 mm, Equipment: documentation/manual, USED ​​3-axis lathe with driven tools and Fanuc 0i-TF CNC Dodpozrnl Aofx Adrjwa

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Dedozrmiaopfx Adrewa

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg Dwjdpeq Nqkxefx Adrea CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,955 h, load capacity: 2,500 kg, lifting height: 4,750 mm, fuel type: diesel, mast type: triplex, construction height: 2,190 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Dwedpfx Adjzngxmorsa Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: DOOSAN D25S-5 diesel forklift - - 2.5 ton lifting capacity - - Year of manufacture 2015 - - Side shifter - - Triplex free-lift mast - - Overall height 2.19 m - Lifting height 4.75 m - - 3955 operating hours according to meter - - 4-cylinder YANMAR diesel engine, 58 hp - - Solid rubber tires, front approx. 90%, rear approx. 80% - - Half cab, lighting system - - Simple and mechanical forklift - - Good condition - - - Delivery possible! Side shifter, 3rd valve, rear work light, front work light, windshield, half cab, CE certificate.

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Type: PUMA 480 LM Year of manufacture: 2007 Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Chuck diameter mm 530 Spindle speed rpm 1500 Drive power kW 45 Tool turret number 12 Powered tools number 12 Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Dsdpfx Adozqzm Derowa Automatic tool measuring arm.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits Dwedeyr R A Eepfx Adrsa • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 510 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, torque: 127 Nm, bar passage: 50 mm, chuck outer diameter: 152 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine used in custom and small-batch production, operating in a single shift. Excellent condition, producing parts with an accuracy of 0.01mm since its initial use. C-axis, driven tool positions in the turret, BMT connection. Programmable steady rest. Equipped with a chip conveyor and oil mist extractor. Comes with original documentation. High-rigidity roller linear guides: The robust roller guides used on the X and Z axes minimize vibration and dramatically reduce machining time. Djdezcmmnopfx Adrewa The price includes the 1.5m bar feeder shown in the picture; it can also be purchased separately if required.

Condition: used, Year of construction: 2008, turning length: 978 mm, turning diameter: 560 mm, spindle bore: 117 mm, spindle speed (max.): 2,000 rpm, Doosan Puma 400MB 3-axis CNC lathe Dwedpfx Adozk Hikjrea C-axis driven tooling Year: 2008 Fanuc 21iTB with Manual Guide Max turning diameter: 560mm Max turning length: 980mm Z-axis travel: -1100mm Chuck diameter: 380mm Spindle bore: 116.5mm Max spindle speed: 2000 rpm Spindle gearbox: low gear, high gear 12-tool turret, BMT 75 Measuring probe Tailstock Chip conveyor with sump and pump Documentation

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 7,404 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Dedpfszb I U Djx Adrswa Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,900 h, Year of manufacture: 2015 Dsdsx Hgn Uepfx Adrswa Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm Dedpsy Tplijfx Adrewa sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm tool taper BMT 55 C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min work piece power 5,5 kW total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 26,000 W, spindle speed (max.): 3,500 rpm, bar diameter (max.): 76 mm, total width: 2,210 mm, total height: 2,480 mm, overall weight: 12,700 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 4,050 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details. • Number of axes: 8 (X1, X2, Z1, Z2, Y, B, C1, C2) • Swing over bed: 800 mm • Swing over saddle: 620 mm • Max. turning diameter: Upper turret 390 mm; Lower turret 300 mm • Recommended turning diameter: 255 mm • Max. turning length: 350 mm • Main/left spindle motor power (30 min / cont): 26 / 22 kW • Main/left spindle nose: ASA A2-8 • Right/sub spindle max. speed: 3500 rpm • Right/sub spindle motor power (30 min / cont): 26 / 22 kW • Right/sub spindle nose: ASA A2-8 • C-axis indexing (C1 & C2): 360° in 0.001° increments • Upper turret travel (X1/Z1/Y): 255 / 800 / 120 mm (±60 mm Y) • Lower turret travel (X2/Z2): 190 / 900 mm • Sub-spindle B-axis travel: 810 mm • Rapid traverse (X1/X2): 20 m/min • Rapid traverse (Z1/Z2/B): 24 m/min • Rapid traverse (Y): 7.5 m/min • Turret stations: 24 total (12 upper + 12 lower) • Tooling type/interface: BMT65P • Indexing time: 0.2 s • Rotary tool spindle speed: 4000 rpm • Rotary tool motor power (15 min / cont): 5.5 / 1.5 kW Dodjznwf Dopfx Adrswa • Machine electric power supply: 95.77 kVA Additional equipment • Chip conveyor • Various static tool holders • Rotary live tool holders • Chucks on both spindles Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning length: 1,070 mm, turning diameter: 460 mm, spindle motor power: 22 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, ONLY 10 HOURS !!!!! Dwjdpfx Aszk I Rvsdrsa There are 8 Doosan CNC Turning center Like this in our warehouse 1 Set DOOSAN GT2600 LM CNC Turning center With C Axis - 12 inç - 10 Hours 2 Set DOOSAN GT 2600 CNC Lathe 12 inç 10 hours 2 Set DOOSAN GT2100 CNC Lathe 10 inç 10 hours 3 Set DOOSAN Lynx 2100 CNC Lathe 8 inçh 10 Hours you can visit and check all machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 1,604 h, machine/vehicle number: DHKCEAAHSM6051226, USED DOOSAN HYDRAULIC EXCAVATOR IN GOOD WORKING CONDITION MODEL : D80R SERIAL : DHKCEAAHSM6051226 YEAR : 2021 HOUR : 1604 Dwjdpfsy E Hb Sex Adroa

Condition: used, Year of construction: 2008, turning length: 1,043 mm, turning diameter: 550 mm, spindle bore: 116 mm, spindle speed (max.): 2,000 rpm, CNC lathe, 2 axes, Doosan Puma 400B Year: 2008 Fanuc 21iTB with Manual Guide Max. turning diameter: 550mm Max. turning length: 1043mm Z-axis travel: -1100mm Chuck: 380mm Spindle bore: 116.5mm Max. spindle speed: 2000 rpm Spindle gearbox: low gear, high gear 10-tool turret Djdpfx Aozh Uq Djdrswa Steady rest with SMW autoblock, diameter 30-245mm Measuring probe Tailstock Chip conveyor with tray and pump Documentation

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, spindle power 18.5 kW, Fanuc control, Through Spindle Coolant, swarf conveyor Dodezqtb Hepfx Adrswa

Condition: used, functionality: fully functional, machine/vehicle number: 0006, Year of construction: 2022, operating hours: 17 h, load capacity: 1,400 kg, lifting height: 6,000 mm, free lift: 1,675 mm, fuel type: electric, mast type: triplex, construction height: 2,490 mm, fork carriage width: 813 mm, fork length: 1,150 mm, empty load weight: 3,530 kg, total length: 1,417 mm, drive type: Elektro, construction width: 1,270 mm, Reach truck Chassis number: 0006 Load center: 600 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Vulkollan Front tire size: 343x140 Front tire condition: 80 - 100% Rear tire type: Vulkollan Rear tire size: 285x100 Rear tire condition: 80 - 100% Battery voltage: 48V Battery Ah: 560Ah Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Dodpfxozthq Uj Adrjwa Side shifter, 3rd valve, 4th valve, rear work light, front work light, CE certificate, safety light, interior mirror, joystick, rotating beacon, LED, seat

Condition: used, Year of construction: 2017, operating hours: 7,480 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 348 cm Dwjdpfoy Nwuksx Adrsa Digging depth: 4.4 m = Additional options and accessories = - Central lubrication - Rubber tracks

Condition: new, functionality: fully functional, Key features of the DOOSAN T4005 Drill Tap Center may include: High Precision: The DOOSAN T4005 Drill Tap Center is engineered for precise drilling and tapping results, delivering consistent quality in manufactured components. High-Speed Spindle: Featuring a powerful, high-speed spindle, the machine efficiently processes various materials—such as metals, plastics, and composites—while maintaining productivity. Multi-Axis Capability: Many DOOSAN T4005 models are equipped with multiple axes, enabling complex machining operations and greater flexibility in component production. Automatic Tool Changer: The machine often includes an automatic tool changer, allowing for smooth transitions between different tools and minimizing setup times to enhance efficiency. User-Friendly Interface: The CNC system typically offers an intuitive user interface, simplifying programming, process monitoring, and operation for users at all experience levels. Dwodjy Sv Tqepfx Adroa Robust Construction: Designed for industrial use, the machine is built with high-quality materials and components to ensure durability and continuous operation. Customization Options: Depending on the manufacturer, the CNC machine may offer various customization options to adapt to specific machining or production requirements.

Condition: good (used), Year of construction: 2012, Vertical CNC lathe with a 12-position turret and powered tools; Year of manufacture 2012, in good condition; Fanuc 31i control with Manual Guide i; Dwsdpfxozrwa Nj Adroa 630 chuck – 900 mm turning diameter; 2-speed gearbox – resulting in very high torque; Tool setter, detachable; Chip conveyor; Various tool holders, fixed and powered; Only approximately 4,100 operating hours; An inspection is possible and recommended by arrangement, with the machine powered on.