Used Carousel Lathe for sale (5,573)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D PL ManualTurn turning diameter: 1.140 mm turning lenght: 4.200 mm turning diameter over slide: 800 mm faceplate diameter max.: 1.000 mm Support Length of the bed slide: 1.000 mm Travel of the cross slide: 650 mm Width of the cross slide: 425 mm bed width: 710 mm Main Spindle Gijdpfx Aney N Sxqexot spindle bore: 120 mm spindle diameter in front bearing: 190 mm Accessories 1 piece fix steady rest 10 pieces Multifix quick-change steel holder Typ D The machine has been general overhauled in 2007.

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Center distance: 2.000 mm Gijdpfxsy N Sw He Anxjt turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements The main spindle box was completely overhauled approx. 10 years ago. The vibration-damping elements are included in the scope of delivery. The machine is from the original owner.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Gedjy N Swyepfx Anxjit Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Giedpfx Aey N Svponxjt Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: good (used), Year of construction: 1972, functionality: fully functional, Swing diameter over bed: 1,650 mm Swing diameter over support: 1,350 mm Turning length: 10,000 mm Bed width: 1,120 mm Speed range: 1.4 - 280 rpm Max. torque (approx.): 20,000 Nm Workpiece weight between centers, max.: 10,000 kg Gisdpfx Ansy N Su Ejxjt with 1 steady rest / follower rest: 12,500 kg Equipment 3-axis digital readout: ACU RITE 1 steady rest 1 roller support Chip conveyor: KABELSCHLEPP Chuck guard The machine comes from first ownership, is free from defects, and is in very good condition. In 2023, the headstock was overhauled; among other things, the main spindle bearings were replaced and the main spindle and bull gear (bearing seat) were hard-chromed and reworked. The guideways are also in very good condition for its age.

Condition: good (used), Centre height: 290 mm Centre distance: 3000 mm Swing diameter over bed: 580 mm Swing diameter over cross slide: approx. 400 mm Spindle bore: 63 mm Spindle mount DIN 55027: Size 8 Speed range: 25 – 1120 rpm Bed width: 365 mm Longitudinal feed: 0.03 – 1.3 mm/rev Cross feed: 0.008 – 0.33 mm/rev 80 metric threads: 0.25 – 76 mm 96 Whitworth threads: ½” – 152 tpi 52 module threads: 0.25 – 22 module 88 diametral pitch threads: 1 – 176 DP Tailstock taper: MK 4 Drive power: 5.5 kW Dimensions (L x W x H): 4450 x 1300 x 1350 mm Weight: 2800 kg Accessories / Special Features: • Quick-change tool post, brand "Multifix", size B • Hardened bedways Gsdpfxextu Ers Anxeit • Bed stop Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2012, turning diameter over cross slide: 279 mm, turning length: 762 mm, spindle bore: 58 mm, spindle speed (max.): 1,800 rpm, travel distance X-axis: 203 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 11 m/min, rapid traverse Z-axis: 11 m/min, total height: 2,110 mm, total length: 2,540 mm, total width: 1,750 mm, swing diameter over cross slide: 279 mm, turning diameter over bed slide: 508 mm, turning diameter over top slide: 508 mm, overall weight: 2,225 kg, spindle nose: A2-5, Equipment: rotational speed infinitely variable, The machine comes from a university and is therefore in exceptionally neat condition (almost as new) with only 5 hours of "cutting time"! If desired, it can also be inspected in operation at our facility! Additional options & accessories: - 3-jaw chuck (not shown in the photo but included with the machine) - 8 tool holders (rapid type WD 1/20) - 4-position tool holder/changer - Electronic handwheel Gijdpfx Ansy R S Ihsxet - Original coolant tank + pump - Double handwheel for Teach-In operation - Documentation Weight & dimensions: 2225 kg approx. 2540 x 1750 x 2110 mm (LxWxH)

Condition: used, Year of construction: 1983, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 10,000 mm, For sale: PORĘBA TPK-80/10M universal lathe, year of manufacture 1983, in very good technical condition. Availability: in stock, under power, available for inspection and testing at any time. Giodpfx Asyxgm Usnxot Standard equipment: Tailstock Coolant pump Tool holder Additional equipment: 1 x Traveling steady 1 x Steady rest 40–400 mm 1 x Steady rest 400–600 mm 1 x 3-jaw self-centering chuck Ø 500 mm Technical specifications: Distance between centers / turning length: 10,000 mm Swing over bed: 800 mm Swing over carriage: 530 mm Swing in gap: 1080 mm Spindle bore: 95 mm Max. workpiece weight: between centers: 6,000 kg between centers + 1 steady rest: 7,500 kg between centers + 2 steady rests: 9,000 kg Number of spindle speeds: 21 Speed range: 8 – 800 rpm Number of feeds: 80 Feed range: Longitudinal: 0.1 – 12.8 mm/rev Cross: 0.05 – 6.4 mm/rev Main motor power: 16/22 kW (1st / 2nd gear) Dimensions: Total length: 12,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 11,200 kg

Condition: used, Collet set, chuck collet holder for draw-in collets WEILER Godpfoy Ra Dqox Anxoit Collet chuck, collet holder, collet device Suitable for WEILER Praktikant lathe, year of manufacture 1984 Draw-in collet type: FM 613 / 386E DIN 6341 Collet diameter: 32 mm Collet length: approx. 115 mm Collet thread: TR 32 x 1.5 mm - Collet holder sleeve with MK 5 external taper (Ø 44 mm) - Draw tube with internal thread M 32 x 1.5 mm, handwheel for manual tightening of the collet - 15 pieces FAHRION collets: Ø 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm - fits WEILER Praktikant and should also fit WEILER Matador Total weight: 10.5 kg Very good condition

Year of construction: 2023, condition: ready for operation (used), - USED - 3-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 640 mm MAX ROTATING DIAMETER: 600 mm MAX TURNING DIAMETER: 420 mm BAR CAPACITY: 75 mm SPINDLE: 3500 rpm; 15-18,5 kW; ASA A2-8 ; 254 mm X-AXIS TRAVEL: 210+30 mm Z-AXIS TRAVEL: 610 mm RAPID FEEDS X-Z: 18 - 24 m/min DRIVEN TURRET HEAD: BMT65 ; 12 POS; 4000 rpm; 4,5 kW Giedpfxoyy D I Ej Anxot CONTROL UNIT: FANUC 0i-TF WEIGHT: 6230 Kg OVERALL DIMENSIONS: 4017 x 1848 x 1819 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; FANUC MANUAL GUIDE-I ; ETHERNET PORT ; USB PORT ; TOOL SETTER ; PORTABLE HANDWHEEL NOTE: WITH No 7 FIXED TOOL HOLDERS

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Sliding Head Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke Gijdsy N A S Uspfx Anxet - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool carrier 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool carrier 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Max. number of driven tools: 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-spindle / Front attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear attachment, driven / fixed - Z travel, driven with work spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (number): 3 Rear attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (number): 4 Tool drive for rear attachment (with X4 axis) - Max. speed (rpm): 10,000 - Max. number of driven tools: 4 - Clamping diameter for drilling tools: - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant system - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire suppression system Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Swiss-type Lathe Manufacturer: Traub Machine Model: TNL 12 Gsdpfx Anoy N A Atsxsit Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 12.7 - Material quality (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. machining length / spindle stroke - With fixed guide bushing (mm): 130 - With rotating guide bushing (mm): 80 - With programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Turret 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Turret 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Drive for Turret 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (number): 2xG - Clamping diameter for drilling tools (mm): 0.5-7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Backworking Attachment (dragged / fixed) - Z stroke, dragged with work spindle (mm): 80 - Holder diameter for tools (mm): 20 - Tool stations (number): 3 Backworking Attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Holder diameter for tools (mm): 28 - Tool stations (number): 4 Tool Drive for Backworking Attachment (with X4 axis) - Max. speed (rpm): 10,000 - Driven tools max. (number): 4 - Clamping diameter for drilling tools - driven (mm): 0.5 - 7 - non-driven (mm): 0.5 - 10 Coolant System - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Pump delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure coolant system - Fire extinguishing system Subject to changes and errors in technical data and specifications.

Condition: excellent (used), Weisser Heilbronn Senior Lathe with Accessories: - special machine - motor can regulate the speed of spinning to perfection - center to center - 1500 mm - turning diameter over bed - 800 mm - turning diameter over support table - 500 mm - weight - 7 tons. Godoh Ad N Ujpfx Anxsit - dimensions - 200 mm lenght; 1700 mm wide; 2100 mm height - accessories included - check pictures.

Condition: like new (used), Year of construction: 2010, operating hours: 76,482 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Gsdpoy Rpq Tefx Anxsit Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: used, faceplate diameter 2.400 mm Giedpfx Ansy N D U Rexot swing diameter 2.700 mm turning height 2.100 mm output 30 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Make: Keilinghaus Type: PLS 1500 HY Specifications Metric US Standard Max. blank / workpiece over bed 3000 Max. blank / workpiece in the gap 5000 Ø Centre height over bed 1500 mm Distance between centers Gjdpfxskvnnks Anxjit 2600 mm Maximum sheet thickness 15 mm Stroke X-Axis 1000 mm Stroke Y-Axis 2800 mm Speedrange 240 Rpm Power 75 kW Spindle taper head stock DIN 55027 - Size 15 DIN / Camlock Stroke pinole quill 1200 mm Dimensions (Estimate) Length 10000 mm Width 8000 mm Height 4500 mm Weight 60000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1980, turning diameter over cross slide: 1,020 mm, turning diameter: 1,380 mm, turning length: 3,000 mm, Manufacturer: Leopoldo Pontiggia Type: SFE 700 Year of construction: 1980 3-jaw chuck 1200 mm Heidenhain digital readout system X / Z Axis Feeds in 2 directions Multi-fix tool system with inserts Specifications Metric US Standard Turning length 3000 mm Swing over bed Ø 1390 mm Gjdjwp H Ruepfx Anxjit Swing over cross slide 1020 mm Spindle bore 150 mm Bed width 700 mm Quill travel 300 mm Spindle mount Metric 80 Mk Power 18 kW Speed 0 - 350 rpm Workpiece weight 8000 Dimensions (estimated) Length 6600 mm Width 1800 mm Height 2000 mm Weight 18000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, taken from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they will not constitute representations or terms of contract. We recommend verifying all important details.

Condition: good (used), Year of construction: 1998, Center height 1700 mm Can be extended or shortend to matching height as they are 2 peices Central lubrication Each steady rest equipped with 3 point Driven / Morotized units Gisdpfxewrcxao Anxst Length:1800mm Width:1600mm Height:2100mm Weight:1800kg

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Gedoyl Uh Sjpfx Anxsit Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Gjdpfx Anjxf E Rcoxoit Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Giedpfox Di Rqsx Anxot Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Build in Spindle motor High Rigidity BMT Turret Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Speed live tools: 5000Rpm Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Gsdpfx Anjx I Nikjxjit Chip conveyor: Yes Tool eye: Yes Length: 3800mm Width: 2000mm Height: 2100mm Weight: 8500kg

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Giedpfxjx S Hm Ie Anxet Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm Gjdpfxex Tgr To Anxjit 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Steady rest  4 chuck 1000 mm diameter 3 chuck 500   mm diameter   2 Axis digital read out system Gijdswrxpbepfx Anxet DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Width: 1800mm Height: 1550mm Weight: 13800kg