Used Central Lubrication System for sale (37,681)

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Bledpfxeyb Rpdj Aproh The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: used, Year of construction: 2016, Software control, accessories +++ Attention: This item is part of an online auction! +++ Bledpfsza Aitjx Aprsh

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Fully automatic pickling process Riehle model: Comjet Unloading carriage 580x980 Output up to approximately 240 sheets/hour 180-liter lye tank, extendable 3-stage, high-concentration lye curtain Suitable for sheet sizes 580 x 780 & 580 x 980 mm Blsdpfxoywalue Aproh High pump capacity with 2-stage filter Includes salt addition system Stainless steel construction Connection 400V, 32A CEE plug Dimensions approximately: 1270 x 4800 x 2500 mm, WxLxH Used machine

Condition: used, Dürkopp overhead hanging bag conveyor system for 9 levels Automated Dürkopp conveyor system for in-plant material handling and sorting. The system spans nine interconnected levels and is suitable for transporting overhead hanging bags in logistics, shipping, textile, and distribution centers. Manufacturer: Dürkopp Fördertechnik Machine type: Overhead hanging bag conveyor system Design: Automated conveyor system Conveying principle: Rail-guided hanging bag conveyor Number of levels: 9 Levels interconnected Dimensions per level: approx. 90 x 20 m Conveying distance across multiple floors Rail system with curves and switches Electric drives available Control and conveying elements available Industrial design Hanging bags are not included in the offer The system is designed for the transport of overhead hanging bags Bsdoza Uydopfx Aprslh Matching hanging bags can be offered separately upon request Condition: Used Location: Pforzheim

Condition: used, Manufacturer: CALJAN Manufacturer: Van der Lande Industries Machine type: Conveyor system / Package conveyor system Bljdpjza Umdsfx Aprsh Design: Multi-lane conveyor system Construction: Two-level system Conveyor technology: Belt conveyor Length: approx. 80 m Levels: 2 Color: Red / Gray Condition: Used Location: Pforzheim

Condition: good (used), Dust extraction system for grinding dust from a vocational training center. Bedpfezbir Djx Aprolh Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), For sale is a BT-400 dust extraction unit with a chip volume of 270 liters. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Suction capacity 2530 m³/h Blodpfxey U Irks Aprsh - Suction connection 125/2x100 mm - Chip volume 270 liters - Motor power 1.5 kW / 2 HP - Year of manufacture 2025 The dust extraction unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info: Tel.: 06244-20299 Related terms: Dust extraction unit, dust extraction Reference: R-A0117

Condition: used, Year of construction: 2017, machine/vehicle number: LC611, Used Tetra pak UHT system 5000 LPHTechnical Specifications & Performance DataThis Tetra Pak UHT System Steritherm (model VTIS C-4) is a robust, second hand processing unit designed to deliver consistent ultra-high temperature treatment for beverage production and industrial packaging workflows. Engineered for high reliability and easy integration with downstream filling and bottling equipment, it provides stable thermal performance and hygienic operation for modern beverage production lines.Manufacturer: Tetra PakModel: VTIS C-4 SterithermManufacturing year: 2017Capacity: 5000 L/hMax process temperature (indicative): up to 148 °C (per inspected pressure section)Included equipment: Alfa Laval SHL-20 homogenizer (250 bar), Alfa Laval H7-RC plate heat exchanger (198 L), pump station with Alfa Laval LKH-10 and LKH-107, ABB drive, and CIP regulatorDesign intent: Continuous UHT treatment with integrated homogenization and plate heat exchangeConstruction: Hygienic stainless steel process componentsAdvanced Automation & Control SystemsThe system includes a computer control system for precise process management, delivering stable time–temperature profiles and consistent product quality. Automated supervision of key parameters helps reduce product losses and optimizes energy usage. Interlocks and instrumentation support safe operation throughout heating, holding, and cooling stages.Centralized computer control for process sequencing and alarmsIntegrated CIP regulator to streamline cleaning proceduresProcess instrumentation for pressure, temperature, and flow controlComponent-level CE marking on included Alfa Laval equipmentProduction Line Integration CapabilitiesDesigned to fit seamlessly into a used bottling line or new production layouts, this UHT system interfaces smoothly with upstream raw product handling and downstream filling and packaging machinery. It supports industrial packaging workflows for PET and Glass bottling operations by supplying thermally treated product to fillers.Inline compatibility with fillers, buffer tanks, and conveyorsIdeal for beverage production environments needing continuous 5000 L/h throughputFlexible process connections for integration with existing piping and CIP loopsSuitable for second hand upgrades or capacity expansionsMachine Condition & Maintenance HistoryThis unit is presented as a ready-to-run, second hand UHT system. Ancillary components show evidence of professional upkeep, including a recent service marking on the Alfa Laval pump (dated 04/24) and inspection records on pressure-rated parts.Operational status: ready for operationInspection labeling present on pressure sectionsService marking observed on included pump componentOperational Performance & VersatilityEngineered for consistent UHT processing, the line’s Steritherm design supports stable thermal treatment, homogenization for product consistency, and effici... Bodpfx Apey Ef T Torjlh

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16001522, overall weight: 1,500 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,000 mm, total height: 2,000 mm, volume flow: 4,500 m³/h, power: 4 kW (5.44 HP), input frequency: 50 Hz, input current: 9 A, ESTA MOBEX P-36 extraction system Attention: The item must be collected without fail between 07 and 09 July 2026 on a date to be mutually agreed. Bsdey Dcxkspfx Aprslh FCA D-71263 Weil der Stadt – loaded onto truck

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Bodpfx Aozba E Ioprolh Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter • WTK fan • Air lock • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Bsdpfex T Ah Dex Aprslh Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Bedpfx Aou Thh Eeprolh Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, QliQFlow Conveyor System for Warehouses and Order Fulfillment Centers Modern conveyor system for use in warehouses and order fulfillment centers. Suitable for the transport of cartons, containers, and individual items in shipping, warehousing, and intralogistics processes. Bljdpfjzaqpbjx Aprjh Manufacturer: QliQFlow Product Type: Conveyor System Design: Modular Conveyor System Components: Roller conveyors, curved conveyors, incline conveyors, conveyor belt segments, safety fences, control cabinet, operator panel, light signaling systems, emergency stop devices Application Area: Warehouse Logistics Application Area: Order Fulfillment Application Area: Shipping Logistics Application Area: Intralogistics Condition: Used Further information available upon request.

Condition: ready for operation (used), functionality: fully functional, total width: 13,800 mm, cutting length (max.): 6,900 mm, Roof Truss Pressing System (C-Type) – Complete Production Line with Crane Complete, fully equipped roof truss pressing system for sale. The system is in good technical condition, regularly maintained, and ready for immediate operation – no additional investment required. Designed for professional timber structure manufacturing, suitable for small to medium-scale production. 🔧 Included Equipment Bodjymmrljpfx Aprolh • Hydraulic roof truss press • C-type configuration • Assembly & pressing tables • Floor-mounted rail system: 12 m • Second-hand tables: 12 pcs • Like new Randek pressing tables: 4 pcs – 550 mm • Like new Randek ridge table: 1 pc – 900 mm • Overhead crane system • Crane radius: 6.9 m 📌 Key Advantages • Fully operational – plug-and-produce setup • No immediate repair or upgrade costs • Efficient workflow layout with integrated rail system and magnetic tables • Ideal for prefabricated roof truss production 📍 Additional Information • On-site inspection available • Suitable for companies entering or expanding in timber construction • High-quality industrial-grade equipment • Transportation costs are not included.

Condition: used, 450218 Pneumatic Piston Pump, - No. 1: K. Schmidt Type DC 30.20/4, Blodpfslf H S Ujx Apreh - No. 2: BEDE AIRLESS, max. approx. 36 l/min.

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter Bsdpju Icxdsfx Aprelh - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Year of construction: 2005, condition: used, Technical details: Bjdsyzhnlspfx Aprolh lifting capacity in kg: 230 kg

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm Bledpfx Apsu N Auuoreh 3D printer SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Condition: used, Year of construction: 2009, operating hours: 5,799 h, functionality: fully functional, type of input current: three-phase, overall weight: 600 kg, input voltage: 400 V, filter area: 40 m², suction capacity: 4,000 m³/h, negative pressure: 2,500 Pa, transport height: 2,150 mm, transport length: 1,420 mm, transport width: 1,400 mm, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 Bjdpfey Szw Uex Aprelh The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, which minimizes the risk of explosion. Year of manufacture: 2009 Fans with a power of 3 kW. Capacity: 4000 m3/h Vacuum: 2500 Pa Filtration area: 40 m2 Stock number: 1144

Condition: new, CATALOG NUMBER: M0261 TECHNICAL DATA Number of spindles: 21 Distance between first and last drill: 640 mm Distance between spindle centers: 32 mm Max. workpiece size: 50 x 915 x 3000 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Working table height: 860 mm Max. clamp height above table: 70 mm Working pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main machine features: - Single-head boring machine, drilling range 0 - 90 ° - Pneumatically adjustable head inclination angle - Cast iron fences - Spindles adapted for quick-connect couplings - Patented pneumatic workpiece clamps Blsdpfx Apoy Tkhfjreh - Cast iron work table - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment: - 2 aluminum rulers, 1.5 m each (right and left) with two stops - 5 quick couplings - Wooden box for secure transport of the machine ADVANTAGES - Drilling vertically, horizontally, or at an angle - Multi-spindle - Brand new machine - CE certified - Robust and professional Net price: 13,800 PLN Net price: 3,330 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (prices may vary in case of significant exchange rate fluctuations) - We ship machines to every part of the country - Possibility to trade in another machine as part payment The prices provided are net prices. Net price applies to international transactions and EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Condition: good (used), Internal article no.: 24089 Hot melt adhesive system Consisting of: 2x hot melt adhesive tank units (Dynamelt 505 / BJ:04) 15 pcs. Material hoses Various hot melt adhesive application heads (Dynatec BF) Operating instructions Bljdpjfkgycsfx Aprjh Technical data, see pictures

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Bledevviytopfx Aprjh

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Machine without tools Bledpfxjvvi Tts Aprjh Location: Nattheim

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Storage location: Nattheim Bodpfx Aevxk Anoprslh

Condition: excellent (used), Year of construction: 2022, Pressure power 10 bar Pressure power 1.120 l/min. output 7,5 kw Piston compressor system Renner type RIK 500/1500 incl. additional boiler and accessories for generating compressed air for small to medium-sized operations. Bsdpfx Aoy Dvnfsprelh Including dismantling and loading. Fixed loading date: 15.06.2026.