Used Suction System for sale (39,331)

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Gsdpfx Apjxl Elgowoka

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Gkjdpoyvuvlofx Apwsa

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Gsdjyg Nu Njpfx Apwska

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. Gkjdpewc Nrnjfx Apwja The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Gjdpozg Nakjfx Apwska Plan to provide a rotary valve. Available at extra cost.

Condition: good (used), Year of construction: 2014, Includes existing spare filters. Air volume 8000 m³/h Electronic connection value: 1.5 kW 400 V/50 Hz Width: 2000 mm Height: 1650 mm Gjdpfxox Uz A Ao Apwjka Depth: 1000 mm Weight approx. 120 kg

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) Godpfx Asdrtalopwska each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Godpfx Aslxyhfjpweka a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: good (used), Year of construction: 2003, Extraction unit as tabletop unit working area approx. 620 x 360 x 450mm large Gksdpoiwgbtsfx Apwoa drawer to collect the sucked material Control unit RE 1.5 for 5 different blower levels

Condition: excellent (used), I am offering for sale a professional HBM MGCplus measuring system from Hottinger Baldwin Messtechnik (HBM). This is a high-end, modular measuring amplifier used in research laboratories, industry, and testing stations for signal acquisition and analysis from sensors. The device is equipped with a control panel with an LCD display and installed measuring modules. The unit being sold was removed from an industrial installation. Specifications: • Manufacturer: HBM – Hottinger Baldwin Messtechnik • Model: MGCplus • Control unit: AB22A • Installed modules: ML60B BL01 (2 units) AP17 SY03 • Power supply: 115–230 V AC, 50–60 Hz • Maximum power consumption: 300 VA Condition: Gsdszru Rrjpfx Apwoka • Used. • Visual condition as shown in the photos – normal signs of use.

Condition: used, power capacity / kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t Gjdpszcgmzjfx Apwjka required space / m SYSTEM ANTRIEBSTECHNIK DSF4-14.4-20R.N3-0VD Nr. 3030799

Condition: used, power capacity / kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m SYSTEM ANTRIEBSTECHNIK Gedpfsy S Eb Dox Apwoka DSF4-14.4-20R.N3-0VD Nr. 4030276

Condition: used, power capacity / kW Gedpey S D I Nofx Apwoka DSFA4-14.4-20R.N3-0VD Part No.: 4061483 Condition: Used (fully functional)

Condition: used, power capacity / kW SYSTEM ANTRIEBSTECHNIK Gjdpoy S Ebkefx Apweka DSF4-1 4.4-20R.N3-0VD Nr. 3011309

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems for sale. The systems are in very good condition and fully functional. Inspection is possible by appointment. Pos 1 System 3R-203 Rotating element WEDM 360° Pos 2 System 3R-201J Adapter WEDM 90° Pos 3 System 3R-201J Adapter WEDM 90° Gkodpfx Apoxqn Ubewoa Pos 4 System 3R-201J Adapter WEDM 90° Pos 5 System 3R-202 MiniBlock Pos 6 System 3R-202 MiniBlock Pos 7+8 System 3R-204 Height adjustment adapter WEDM Pos 11 System 3R-602.21 Manual chuck Macro Pos 17 System 3R-200-4J-2 470mm System 3R-200-4J-2 470mm Pos 18 System 3R-239–545 0006-V01 System 3R-239–495 Shipping and inspection are possible!

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems for sale. The systems are in very good condition and fully functional. Inspection is possible by appointment. Pos 1 System 3R-203 Rotating element WEDM 360° Pos 2 System 3R-201J Adapter WEDM 90° Pos 3 System 3R-201J Adapter WEDM 90° Godpfx Apoyzqmdoweka Pos 4 System 3R-201J Adapter WEDM 90° Pos 5 System 3R-202 MiniBlock Pos 6 System 3R-202 MiniBlock Pos 7+8 System 3R-204 Height adjustment adapter WEDM Pos 11 System 3R-602.21 Manual chuck Macro Pos 17 System 3R-200-4J-2 470mm System 3R-200-4J-2 470mm Pos 18 System 3R-239–545 0006-V01 System 3R-239–495 Shipping and inspection are possible!

Condition: excellent (used), Harp racks for glass transportation Gksdpfx Apszty Rmewja 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg More technical information can be found attached as Tech. data file 5 units in stock In very good and clean condition As is Available immediately

Year of construction: 2018, condition: excellent (used), functionality: fully functional, power: 3.8 kW (5.17 HP), color: blue, construction height: 555 mm, load capacity: 2,000 kg, control voltage: 230 V, frame width: 2,240 mm, lifting speed: 53 mm/s, noise level: 70 dB, protection type (IP code): IP55, # OCS 500 Twin Track Conveyor and Assembly System with PRO-HUB Chain Hoist For sale is a comprehensive conveyor and assembly system from OCS Overhead Conveyor System AB, type OCS 500 (Twin Track), from project 2064 – Streetscooter Düren. The OCS 500 is a modular conveyor system designed for the transport of hanging trolleys. The trolleys can be moved manually or automatically within the system between different sections and workstations. The project-specific overall drawings show two assembly areas, designated as "Assembly Line 1" and "Assembly Line 2", as well as the transfer areas QVE1 and QVE2. Gkodpszt Nnhofx Apwea The driven sections of the OCS system operate according to the friction principle. Friction wheels transfer the movement of a rotating drive tube to the trolleys. The drive tube is driven by V-belts and worm gear motors. The manufacturer specifies a normal operating speed of 12–20 m/min for the OCS-500 system. Manual sections are also possible within the system. The system includes chain hoists from PRO HUB Hebetechnik GmbH, designed for lifting passenger cars or commercial vehicles. The vehicle is supported via four lifting points. The lifting systems have pivoting and lockable lifting arms as well as a hydraulic safety device. Technical data of the PRO-HUB chain hoists: * maximum load capacity: 2,000 kg * lifting stroke: 2,600 mm, adjustable * lifting speed: 0.3–3.2 m/min, frequency-controlled * corresponding to approx. 5–53.3 mm/s * lifting time: approx. 59 s * lowering time: approx. 59 s * weight: approx. 3,200 kg * length of stationary frame: 4,710 mm * length of mobile frame: 4,670 mm * frame width: 2,240 mm * overall height: 555 mm without chain hoist * motor power: 3.8 kW * connection voltage: 400 V / 50 Hz * control voltage: 230 V * protection class: IP55 * noise level: 70 dB(A) * year of manufacture: 2017/2018 The original documentation lists a STAHL CraneSystems ST5020-6/1.5 2/1 as the electric chain hoist. According to the PRO-HUB operating manual, the lifting and lowering movement is controlled via an HBC-radiomatic wireless remote control with dead man's function. The safety equipment of the chain hoists includes, among other things, main/emergency stop switches, gearbox limit switches, crane disconnecting switch, arm locking device, hydraulic holding/catching cylinders and maintenance chains. Extensive original documentation is available for the system and its components, including OCS operating instructions, overall and detail drawings, documents on conveyor technology and transfer cars, as well as the original operating manual for the PRO-HUB chain hoists and documentation on the control and safety components used.

Condition: used, axle configuration: 2 axles, first registration: 10/2021, loading space length: 13,600 mm, loading space width: 2,440 mm, loading space height: 2,670 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 2021, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Dual tires, Tare weight: 7480 kg, Gross vehicle weight: 35000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2021, Axle type: SAF, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift material: Aluminum, Tail lift size: 200x254, MAKE IS KEL-BERG / TRIDEC STEERING / TAILLIFT = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 275/70R22.5 Brakes: Disc brakes Godpfx Aeyz Nt Nopwska Suspension: Air suspension Axle 1: Dual tires; Lift axle; Tire tread depth left inside: 9 mm; Tire tread depth left outside: 9 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 8 mm Axle 2: Dual tires; Steered; Tire tread depth left inside: 9 mm; Tire tread depth left outside: 12 mm; Tire tread depth right inside: 12 mm; Tire tread depth right outside: 13 mm Weights Tare weight: 7,480 kg Payload: 27,520 kg GVWR: 35,000 kg Functional Tail lift: Rear door, 1500 kg Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €297 per month (default, 60 months); Inquire for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: excellent (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Soco, conveyor belt with roller track and pneumatic equipment -Speed: 22 m/min -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Roller width: 365 mm -Roller diameter: 48 mm -Roller spacing: 60 mm -Individual components: see photos Godpfozrvgnex Apwoka -Dimensions: 1715/640/H930 mm -Weight: 92 kg

Condition: used, Accordion flexible conveyorBrand: Soco SystemWidth: 40 cmMinimum length: 155 cmMaximum possible length: 540 cmHeight: adjustable legs (70 cm in the photo) Gedpfeztf I Rjx Apwjka

Condition: ready for operation (used), Year of construction: 2025, An integrated packaging system Soco consisting of a carton erector and a carton sealer is available. 1) Bottom flap folder Soco F-100P, min. carton width: 320mm, max. carton width: 520mm, max. carton length: 900mm, machine dimensions X/Y: approx. 750mm/1150mm. 2) Carton sealing machine Soco T-402 5-5-7, carton length range: 200mm-750mm, carton width range: 120mm-460mm, carton height range: 95mm-470mm, sealing capacity: 18/min, max. adhesive tape roll diameter: 385mm, weight: approx. 200kg. Including safety guarding, roller conveyor and transfer unit. The system is as new and has only been in operation since January 2026. Documentation available. An on-site inspection is possible. Gedpfey Hk Tnsx Apweka

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gkodpfxey Tlc Ds Apwea Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Condition: new, Year of construction: 2026, Power 5.5 kW / 6.6 kW Inverter yes Motor speed 4500 rpm Voltage and frequency: 400V / 50Hz Tank: 200 liters Water resistance: IP23 Noise level: 75 dB Working pressure: 10 bar Air flow: 640 l/min Suction capacity: 750 l/min Discharge capacity: 640 l/min Gksdpjzr Nauefx Apwja Drive type: Direct drive Outlet diameter: G 3/4″ Dryer: None Air-to-oil cooler Screw manufacturer: BAOSI Inverter: GD300-01A Display: HTK070 / MAM6070 Dimensions (length/width/height): 1446 × 506 × 1096 mm Packaged dimensions (length/width/height): 1385 × 520 × 1200 mm Weight 180 kg / 200 kg

Condition: new, Year of construction: 2026, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Godpfx Aoxdciajpwjka Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.