Used Centre Lathe for sale (8,023)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M216/0316, spindle speed (max.): 10,000 rpm, bar diameter (max.): 16 mm, clamping diameter: 16 mm, counter spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Axes: 7 linear axes + C-axes for main and sub spindle Main Spindle Motor power: 3.7 kW Speed range: 10,000 rpm Indexing: 0.001° full C-axis Iedpexxll Tefx Ab Isa Max. drilling diameter, frontal machining: 10 mm Max. thread size, frontal machining: M8 / M6 Sub Spindle Max. clamping diameter: 16 mm Workpiece length: 125 mm Max. drilling diameter: 8 mm Max. thread size, rear side: M6 Speed range: 250 – 6,000 rpm Gang Tool Holder (upper) Max. drilling diameter: 4.8 mm Max. thread size: M4 Speed: 200 – 8,000 rpm Turret, driven tools: Max. drilling diameter: 4.8 mm Max. thread size: M5 Speed: 200 – 6,500 / 8,000 rpm Driven Tools, rear side Max. drilling diameter: 5 mm Max. thread size: M5 Max. speed: 8,000 rpm Tools Tool stations: 21 Gang slide: 8 positions Turret: 10 positions Rear side tools: 3 positions Tool Holders Turning tool shank: 10 × 10 mm Drill sleeve diameter: 19.05 mm Rapid Traverse Rapid traverse X/Y/Z: 32 m/min Rapid traverse X2/Y2: 8 – 16 m/min MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Footprint (L × W × H): 2.0 m × 1.05 m × 1.7 m Weight: 2,500 – 2,950 kg Power consumption (nominal): 7.9 kVA Main switch: 40 A EQUIPMENT Chip conveyor Parts conveyor belt Parts catcher Fire extinguishing system

Condition: excellent (used), Year of modernization: 1991 Table diameter: 3750 mm Manufacturer: CKD Skoda Max. workpiece diameter: 4200 mm Workpiece height: 2500 mm Vertical stroke: 1400 mm Table diameter: 3750 mm Table load capacity: 40,000 kg Iodpfx Abswza Svo Iea Excellent condition Side support Weight approx. 100,000 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement Iedsxxdw Uspfx Ab Ija X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, Auto CNC Lathe Iodpfxexz Taks Ab Iea TORNOS DECO SIGMA 20/6 6 axis Year 2006/2009 (2x) /2011/2013 (3x) Controller : Faunc 31i c/w 3 meters bar feeder Installed power: 14 kva Technical Machine Benefits Max bar diameter: Ø 20 (25. 4) mm max workpiece length: 200 mm (turning with guide bush) Tool slide at guide bush: number of tool positions at guide bush (fixed or rotary): 15 Tool shank section: 16 x 16 mm Max. Number of cross rotary tools at guide bush: 4 Programmable rotary tool speed for s11: 100-6000 rpm Max. Rotary tool drive power: 1. 5 (2. 2) kw Counter spindle and operations on the second side: max. Number of tool positions for second side operations: 11 Max. Number of fixed and rotary spindles: 4 Programmable rotary tool speed for s41: 100-6000 rpm Max. Rotary tool drive power: 1. 5 (2. 2) kw 6 units of Tornos & 1 unit of Tsugami as 1lot

Condition: like new (used), Year of construction: 2021, operating hours: 6,280 h, functionality: fully functional, machine/vehicle number: CW6180, turning diameter over cross slide: 480 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 480 mm, center height in crank: 400 mm, center height: 400 mm, center width: 550 mm, turning length: 3,000 mm, Equipment: rotational speed infinitely variable, This CW6180 heavy-duty lathe offers reliable performance for metalworking workshops and industrial production. The machine features strong torque, high stability, and is capable of continuous heavy cutting. Ideal for oil-field parts, automotive shafts, repair shops, and general machining. Isdpoxz N Hgjfx Ab Ioa

Condition: good (used), Year of construction: 1985, Heavy duty lathe SN1250X10000 as follows: Manufacturer: 1MAI PLOIESTI (Romania) Year of manufacture: 1985 Main technical data: • Face plate diameter: 1250 mm • Max. swing over bed: 1250 mm • Max. swing over slide: 970 mm Iodsxygdyspfx Ab Isa • Height of centers: 625 mm • Distance between centers: 10,000 mm • Max. weight of the workpiece: 16 t • Speed range of the main spindle: 0.8 – 160 rpm • Main drive motor: 75 kW • Longitudinal feed: 0.4 – 480 mm/min • Transversal feed: 0.2 – 240 mm/min • Intermediate slide feed: 0.15 – 180 mm/min • Intermediate slide travel: 500 mm • Cross slide travel: 520 mm • Tool holder travel: 175 mm • Machine weight: approx. 29,000 kg Accessories: - 4-jaw face plate - 5 steady rests The lathe is in good condition. For more details please contact us.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Iodpfx Absxxlkps Ioa Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Max. frontal thread cutting: M12 Tool capacity: 30 tools Number of axes: 7 MACHINE DETAILS Control: Mitsubishi Meldas Connected load: 10 kW Dimensions & Weight Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders

Condition: good (used), Faceplate: 3600 mm Iedpowf Iwujfx Ab Isa Turning diameter: 4000 mm Max. height under crossbeam: 2950 mm Vertical ram travel: 1750 mm Horizontal ram travel: 2255 mm Scale Chip conveyor

Condition: used, Year of construction: 2008, Mazak QTN 100IIM CNC Lathe Year of manufacture: 2008 C axis, driven tools Chuck: 170 mm Spindle bore: 51 mm Max turning diameter: 280 mm Max turning length: 334 mm Spindle: 35–6,000 RPM Travels: X - 185 mm Z - 385 mm Main spindle motor: 11 kW Max. torque: 184 Nm Spindle nose: A2–5'' Spindle indexing increments: 0.001° - Tailstock - Parts catcher Isdoxg Iffjpfx Ab Isa - Measuring probe - Bar feeder interface - Chip tray with pump - Machine documentation - 10 standard tool holders - 2 driven tool holders 1/1 Weight: 3,800 kg Dimensions (L x W x H): 2.10 x 1.70 x 2.00 m

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 2700 mm Measurements depth 10800 mm Ijdexp Smfspfx Ab Ioa Measurements height 3100 mm Machine weight 16000kg This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, functionality: fully functional, Type: Lathe Manufacturer: MATRA Model: MD26 Condition: Used Quantity: 1 Ijdpfx Abjxz Dvce Iea

Year of construction: 2023, operating hours: 3,635 h, condition: used, machine/vehicle number: 22260005, Max. workpiece diameter: approx. 200 mm, Number of spindles: 2, Number of tool stations: 12, Control unit: SIEMENS Sinumerik, 1 KUKA handheld control unit, Serial no.: 0062709, 1 chip conveyor, KNOLL 280 S-1/160, Year of manufacture: 2022, Serial no.: 1566310, Cooling unit: DELTATHERM RKV 5.5, Year of manufacture: 2022, Serial no.: 3-48097, Net weight: approx. 190 kg, Connected load: 400/460 V/50/60 Hz, 1 handling robot: KUKA Industrial Robot Cybertec-2 Series, Year of manufacture: 2022, Serial no.: 1306487, Net weight: approx. 282 kg, Payload: approx. 22 kg, 1 robot control unit: KUKA KR C5 Dualcap AC, Year of manufacture: 2022, Serial no.: 3131152, Connected load: 3 x 380-480 V, 50/60 Hz, 1 coolant filtration unit: KNOLL KF 150/950, Year of manufacture: 2022, Serial no.: 1566311, 1 air filtration unit: AFS 1100, Year of manufacture: 2021, Serial no.: 36957, Net weight: approx. 70 kg Iedpfxjx Aklgs Ab Iea

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Isdpfxjvk T S As Ab Iea Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MAZAK QT COMPACT 200MYL 500 U Year of manufacture: 2019 MAZATROL SmoothC Iedpjxzd Sqsfx Ab Ioa Max. turning diameter: 340 mm Max. turning length: 535 mm Max. spindle speed: 5,000 rpm C-axis: 0.0001° Spindle: A2-6 Spindle bore: 65 mm Tool turret 12 tool stations 12 powered tool stations Milling spindle power: 5.5 kW Max. milling speed: 4,500 rpm Travel distances: X-axis: 215 mm Z-axis: 605 mm Y-axis: 100 mm Tailstock: 565 mm Rapid traverse X/Y/Z: 30/10/30 m/min Measuring probe Bar feeder interface NC tailstock 3-jaw chuck Kitagawa BB208, diameter 210 mm Toolholder package: 8 fixed + 4 driven toolholders (2/2) Swarf conveyor – ConSep

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 3021 mm Measurements depth 5217 mm Measurements height 2820 mm Machine weight 18900 kg Main Drive Spindle speed range 12000 Movement X-Axis Movement 695 mm X-Axis Rapid Traverse 48 m/min Y-Axis Movement 300 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Rapid Traverse 48 m/min A-Axis Movement 1538 mm A-Axis Rapid Traverse 30 m/min B-Axis Movement 240° B-Axis Rapid Traverse 40 rpm This Doosan Puma SMX 2600 ST turn-mill centre was manufactured in 2018. It features a FANUC 31i-B5 NC system with a 15.0" color display. The machine is CE certified and operates on a 3-phase AC 380V / 50 Hz power source. It boasts a max left spindle speed of 4000 rpm and a max milling spindle speed of 12,000 rpm. The tool storage capacity is 80 tools, and it includes dual pressure chucking. Consider the opportunity to buy this Doosan Puma SMX 2600 ST machine we have for sale. Reach out for more information. Application Types Turning Iedsxzlqbopfx Ab Ioa

Condition: used, Year of construction: 2022, functionality: fully functional, Type: Lathe Manufacturer: OPTIMUM Model: TH3309D Year of manufacture: 2022 Serial number: 2.00122E+11 Condition: Used Quantity: 1 Iedpfx Ajxz Durjb Ija

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Iodpfxex Akixs Ab Iea

Condition: ready for operation (used), Year of construction: 2021, operating hours: 13,392 h, Control Unit Brand SIEMENS Model 840D with ShopTurn 3G Main Drive Tool taper ISM 52 Synchro Spindle Speed 6000 RPM Iedpfx Absxzvtas Ija Spindle motor power 13 kW Number of axis 3 Media Chip conveyor Yes Additional Equipment CELOS Products DMG MORI Service Agent DMG MORI NetService DMG MORI IoT Connector DMG MORI Messenger V2 SERVICE Camera Tail Stock the 2 SMW-Autoblok BBD17/52 which can also be seen on the machine chuck. and the addition of the software (tccentric turning and milling cycle, as well as a deburring toothing cycle). This 3-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1990, functionality: fully functional, Type: CNC Turning Center Manufacturer: Leadwell Model: ECO 250 HS Year of manufacture: 1990 Serial number: L290009025 Condition: Used Quantity: 1 Iedpfxexz Akxj Ab Iea

Year of construction: 2018, operating hours: 34,879 h, condition: used, machine/vehicle number: 710298, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Ijdpfjx Akirex Ab Isa

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Iodpfxsxqh Uuj Ab Ioa Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Ijdpfxsx Aki Es Ab Ija

Condition: ready for operation (used), Year of construction: 2015, Main Drive Spindle motor power 3000 W Tool taper ISO 40 Additional Equipment Feeds X/Y: 20 - 360 mm/min Feed Levels X/Y: 8 Rapid Traverse X/Y: Feed Z: 400 mm/min Isdpfx Abjw Saxvo Iea Feed Drive X/Y: 550 W Feed Drive Z: 750 W This ELMAG UFM 125GT was manufactured in 2015. It features a universal milling machine with a spindle Morse taper ISO 40, and a table surface of 1,320 x 320 mm. The machine offers a vertical speed range of 45-1,660 f/p and a horizontal speed range of 40-1,300 f/p. Ideal for precise and versatile milling tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle Speed 15000 RPM Spindle motor power 46 kW Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 2600 mm Z-Axis Movement 900 mm Y-Axis Movement 1100 mm This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. Application Types Iodpfjxxdtvjx Ab Isa Milling

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand FANUC Iodpjxz H Izsfx Ab Isa Main Drive Number of axis 4 Spindle Speed 10000 RPM Movement X-Axis Movement 700 mm Z-Axis Movement 330 mm Y-Axis Movement 400 mm This 4-axis FANUC Robodrill Alfa-D21LiA5 was manufactured in 2013. It features a travel range of X: 700 mm, Y: 400 mm, Z: 330 mm, and a spindle speed of 10000 rpm. The tool magazine holds 21 tools with rapid feeds up to 54000 mm/min in X and Y, and 48000 mm/min in Z. Consider the opportunity to buy this FANUC Robodrill Alfa-D21LiA5 vertical machining centre. Contact us for more information. Application Types Milling