Used Cnc Milling Centre for sale (18,050)

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Milling spindle speed:20,000 rpm Power:24 kW Tool taper: HSK 63 Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Codpfx Asyrvzmsnfsgu Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Software option III:Cylinder interpolation Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Condition: used, Year of construction: 2011, controller manufacturer: Siemens, controller model: C200-4D SL, _____ Description: Year of manuf. : 2011 Control : Siemens C200-4D SL In General: Year of construction:2011 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Csdpfx Aoy Sq T Sonfegu Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Cgedpfoy Nytpjx Anfju Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 31i-B, _____ Description: Year of manuf. : 2015 Control : Fanuc 31i-B Cjdpfey Hnt Eex Anfogu Turning diam. : 175 mm Turning length : 678 mm In General: Year of manufacture:2015 Control system:Fanuc i 31-B Turning diameter:175 mm Max. turning length:678 mm Spindle: Technology:Motorised spindle Speed:4,500 rpm Power:11 kW Bar capacity:65 mm C-axis:0.001° Clamping cylinder:Hollow clamping cylinder Chuck:Collet chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Power:7.5 kW Bar capacity:51 mm C-axis:0.001° Clamping cylinder:Semi-hollow clamping cylinder Chuck:Collet chuck Tool carrier I (X/Y/Z/B): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:330 mm Y-axis:80 mm (+/- 40 mm) Z-axis:1,040 mm B-axis:182° (+/- 91°) Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:127 mm Y-axis:65 mm (+/- 32.5 mm) Z-axis:678 mm Equipment: Chip removal:Chip conveyor Coolant supply:2x high-pressure coolant pumps Bar feeder:IEMCA Master 80 HF - 4 meter Finished part removal:Part gripper + conveyor belt Set-up operation:Electronic handwheel

Condition: used, Year of construction: 2002, total height: 2,700 mm, total length: 3,000 mm, total width: 2,300 mm, overall weight: 6,000 kg, table load: 200 kg, Hermle C 600 V vertical CNC machining centre, manufactured in 2002, with a Heidenhain TNC 430 control system. The machine has travel ranges of approx. 600 x 450 x 450 mm and is equipped with an SK40 spindle and a tool changer. A chip conveyor and a complete coolant system are included, meaning the machine is ready for immediate use. The machine is in used but fully functional condition and can be demonstrated whilst powered up. Dimensions (LxWxH) approx.: 3000 x 2300 x 2700 mm Travel Y-axis: 450 - mm Weight approx.: 6,000 kg Travel Z-axis: 450 - mm Table diameter: 280 mm Travel X-axis: 600 - mm Table load max.: 200 kg Year of construction: 2,002 Condition: in working order Cgedpjy S Nirofx Anfou Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: like new (used), Year of construction: 2022, operating hours: 2,085 h, turning diameter: 240 mm, spindle motor power: 11,000 W, spindle speed (min.): 3,200 rpm, spindle bore: 90 mm, travel distance X-axis: 142 mm, travel distance Z-axis: 165 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 2,500 rpm, type of input current: three-phase, total height: 2,700 mm, total length: 3,590 mm, total width: 2,610 mm, overall weight: 5,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, Front set Double SPindel Turning Center. with 2 spindle, 2 rew.head, with DRIVEN tools, and C axis, 2 linear robots. Machine is almost new, we used only 2000 hrs. This is the FULL-FULL version of the machine, with two side feeders. collet + 3 jaw chucks. Chain conveyor. FANUC 0ITD control. machine bought new from Takisawa dealer in Hungary. ( SZIMKER ZRT ) RAKU-RAKU MONITOR. Codpfx Aorzq N Uonfjgu

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Cgjdpfxjvt D D Ue Anfou Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: refurbished (used), Year of construction: 2007, turning length: 5,200 mm, turning diameter over cross slide: 1,140 mm, turning diameter: 1,140 mm, spindle motor power: 90,000 W, spindle speed (max.): 1,000 rpm, spindle bore: 245 mm, travel distance X-axis: 920 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 5,370 mm, mount diameter: 100 mm, rotational speed (max.): 3,200 rpm, torque: 730 Nm, spindle nose: B20, Equipment: rotational speed infinitely variable, WFL Millturn M120/5000 CNC TURNING-DRILLING-MILLING CENTER TYPE M120 MILLTURN WITH TAILSTOCK Cjdpfx Ajul S Eyonfegu AND SINUMERIK 840 D CONTROL SYSTEM

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Codpfswu I Irsx Anfjgu Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Year of construction: 2010, condition: like new (used), I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12.000 rpm. Radius R2mm. Cedpfx Ashw Db Ienfjgu HSK63 holder. Available immediately.

Condition: refurbished (used), Year of construction: 2008, WFL Millturn M120X/3000 WORKING RANGE centre distance = 3000mm Swing over bed = 1220mm Swing over slide top = 1140mm Longitudinal travel (Z) = 3330mm Face travel (X) = 920mm Distance spindle nose to tailstock tip = 3812mm ROTATING SPINDLE Spindle head DIN 55026 form size A15 spindle bore 165mm MAIN DRIVE AC-drive with 2-stage gearbox Drive power 100% ED 60kW Max. Spindle speed 1600 1min Max. Spindle torque 100% ED 4472 NM C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Smallest programmable increment 0.001°. Max. Speed 20min-1 Max. Torque on spindle 100% ED Nm 3000 Holding torque of disc brake Nm 6000 FEED DRIVE Cross slide, rotary drilling-milling unit: AC servo drive Feed force longitudinal (Z) kN 30.0 Feed force plane (X) kN 31,5 Feed force Y-axis 55kW kN 25.0 Rapid traverse speed: longitudinal (Z) m/min 15.0 plane (X) m/min 15.0 Y-axis m/min 12.5 Rapid traverse B-axis °/s 90 Cgjdpfol Smhljx Anfeu BALL SCREW LENGTH (Z axis) ø x pitch mm 63X20 PLAN (X-axis) ø x pitch mm 63X10 RIDGE STOCK Quill diameter mm 180 Quill stroke mm 200 Quill force (adjustable) N 5400-40000 Quill with built-in bearing MK 6 TOOL CARRIER (single tool carrier, rotary drilling-milling unit) AC drive, drive power 100% ED kW 55 Spindle speed max. min-1 3200 Max. Torque at spindle 100% ED Nm 730 Travel perpendicular to X/Z plane (Y axis) 55kW mm 650(-300/+350) Tilting angle of the milling spindle (B axis) ° -110/+90 Spindle head for tools according to DIN 69893 HSK-A100 Milling spindle diameter in front bearing mm 130 TEMPERATURE STABILISATION through controlled cooling circuit with compressor - cooling unit EXTERNAL TOOL MAGAZINE: Number of Storage spaces (space-coded) Size HSK100 pcs 90 Max. Tool length mm 500(800) DIMENSIONS Length(max. tool magazine with chip conveyor) m 13 Height m 4,1

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE Cgjdpfxju Hl R Ts Anfeu AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit. Cgedexqyg Njpfx Anfeu

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Cgodeyahv Sepfx Anfsu Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Rapid traverse rate Z-axis: 36 m/min Cgjdpfx Asy Tw Ulsnfsu Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 Cgodjn D N H Topfx Anfou WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Cedpfszat Tvex Anfjgu Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Codpfx Anex A Tk Ssfegu Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Csdpjx A Th Rofx Anfjgu Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Csdex A Hbkopfx Anfjgu Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Cgodpox A Tcusfx Anfsu Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Codpfx Anox E Dncofogu Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Machine is available immediately!

Condition: excellent (used), Year of construction: 2021, Twin-spindle version With milling head with C-axis with Y-axis with driven tools FANUC Series 31i Model 5 control Turning diameter - 540 mm Turning length - 1040 mm Y-axis travel 170 mm (+/- 85) Spindle taper ASA A2-6 Spindle speeds 5,000 rpm each C-axis indexing 0.001° Milling head B-axis 240° Cgodpfx Anjzbr Aljfsu Indexing 0.001° Spindle speed 12,000 rpm Turret with 12 driven positions Tool magazine with 80 positions Part pick-up device Tool measuring system LNS Sprint 565 S2 bar feeder Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1995, functionality: fully functional, travel distance X-axis: 6,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 10 rpm, table width: 1,000 mm, table length: 8,000 mm, CNC Bed Milling Machine Zayer MF3 8000 CNC For sale: bed milling machine from the well-known manufacturer Zayer, model MF3 8000 CNC, production year 1995. The machine is designed for machining large and long workpieces, ensuring high precision and rigidity. Technical specifications: Travels X/Y/Z: 6300 x 1100 x 1500 mm Table size: 8000 x 1000 mm Cgedpfxjyw N Raj Anfeu Spindle speed: 10 – 1800 rpm Spindle power: 18.5 kW Spindle taper: ISO 50 CNC control: Heidenhain TNC 320 Universal milling head: 360° swivelling Machine in very good technical condition, ready for operation.

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Codpfoyq Sztox Anfegu Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.